texttest -a complex -d /Users/sumo/clangMacOS_M1/sumo/tests -reconnect /Users/sumo/clangMacOS_M1/texttesttmp/clangMacOS_M1.30Jun001939.83219 -g
texttest -a complex -d /Users/sumo/clangMacOS_M1/sumo/tests
---------- Differences in errors ---------- 0a1,4 > Traceback (most recent call last): > File "/Users/sumo/clangMacOS_M1/sumo/tests/../tests/complex/fmi/runner.py", line 28, in <module> > from fmpy import read_model_description, extract > ModuleNotFoundError: No module named 'fmpy' ---------- Differences in output ---------- 1,3d0 < FMU validation successful < Simulating libsumofmi2 (model name 'SUMO', FMI v2.0)... < Print ended at step 60.0
---------- Differences in errors ---------- 0a1,4 > Traceback (most recent call last): > File "/Users/sumo/clangMacOS_M1/sumo/tests/../tests/complex/fmi/runner.py", line 28, in <module> > from fmpy import read_model_description, extract > ModuleNotFoundError: No module named 'fmpy' ---------- Differences in output ---------- 1,63d0 < FMU validation successful < Simulating libsumofmi2 (model name 'SUMO', FMI v2.0)... < TIME 1.0: vehicle.getIDCount = 6 < TIME 2.0: vehicle.getIDCount = 6 < TIME 3.0: vehicle.getIDCount = 6 < TIME 4.0: vehicle.getIDCount = 7 < TIME 5.0: vehicle.getIDCount = 7 < TIME 6.0: vehicle.getIDCount = 8 < TIME 7.0: vehicle.getIDCount = 8 < TIME 8.0: vehicle.getIDCount = 9 < TIME 9.0: vehicle.getIDCount = 9 < TIME 10.0: vehicle.getIDCount = 9 < TIME 11.0: vehicle.getIDCount = 9 < TIME 12.0: vehicle.getIDCount = 9 < TIME 13.0: vehicle.getIDCount = 10 < TIME 14.0: vehicle.getIDCount = 10 < TIME 15.0: vehicle.getIDCount = 10 < TIME 16.0: vehicle.getIDCount = 11 < TIME 17.0: vehicle.getIDCount = 11 < TIME 18.0: vehicle.getIDCount = 12 < TIME 19.0: vehicle.getIDCount = 12 < TIME 20.0: vehicle.getIDCount = 12 < TIME 21.0: vehicle.getIDCount = 13 < TIME 22.0: vehicle.getIDCount = 13 < TIME 23.0: vehicle.getIDCount = 13 < TIME 24.0: vehicle.getIDCount = 13 < TIME 25.0: vehicle.getIDCount = 13 < TIME 26.0: vehicle.getIDCount = 12 < TIME 27.0: vehicle.getIDCount = 10 <truncated after showing first 30 lines>
---------- Differences in errors ---------- 0a1,4 > Traceback (most recent call last): > File "/Users/sumo/clangMacOS_M1/sumo/tests/../tests/complex/fmi/runner.py", line 28, in <module> > from fmpy import read_model_description, extract > ModuleNotFoundError: No module named 'fmpy' ---------- Differences in output ---------- 1,4d0 < FMU validation successful < Simulating libsumofmi2 (model name 'SUMO', FMI v2.0)... < key, value: 'meaningOfLife', '42' < Print ended at step 60.0
---------- Differences in errors ---------- 0a1,4 > Traceback (most recent call last): > File "/Users/sumo/clangMacOS_M1/sumo/tests/../tests/complex/fmi/runner.py", line 28, in <module> > from fmpy import read_model_description, extract > ModuleNotFoundError: No module named 'fmpy' ---------- Differences in output ---------- 1,91d0 < FMU validation successful < Simulating libsumofmi2 (model name 'SUMO', FMI v2.0)... < TIME 0: laneID = '' < TIME 1.0: laneID = 'WE1_0' < currentPos = [0.0, -1.6] < targetPos = (10.0, -1.6) < TIME 2.0: laneID = 'WE1_0' < currentPos = [10.0, -1.6] < targetPos = (20.0, -1.6) < TIME 3.0: laneID = 'WE1_0' < currentPos = [20.0, -1.6] < targetPos = (30.0, -1.6) < TIME 4.0: laneID = 'WE1_0' < currentPos = [30.0, -1.6] < targetPos = (40.0, -1.6) < TIME 5.0: laneID = 'WE1_0' < currentPos = [40.0, -1.6] < targetPos = (50.0, -1.6) < TIME 6.0: laneID = ':J1_10_0' < currentPos = [50.0, -1.6] < targetPos = (60.0, -1.6) < TIME 7.0: laneID = 'WE2_0' < currentPos = [60.0, -1.6] < targetPos = (70.0, -1.6) < TIME 8.0: laneID = 'WE2_0' < currentPos = [70.0, -1.6] < targetPos = (80.0, -1.6) < TIME 9.0: laneID = 'WE2_0' < currentPos = [80.0, -1.6] <truncated after showing first 30 lines>
---------- Differences in errors ----------
0a1,24
> Traceback (most recent call last):
> File "/Users/sumo/clangMacOS_M1/sumo/tools/xml/protobuf2xml.py", line 32, in <module>
> import google.protobuf.descriptor # we need to do this late because the xml2protobuf import modifies sys.path
> ModuleNotFoundError: No module named 'google'
> Traceback (most recent call last):
> File "/Users/sumo/clangMacOS_M1/sumo/tools/xml/xml2protobuf.py", line 210, in <module>
> main()
> File "/Users/sumo/clangMacOS_M1/sumo/tools/xml/xml2protobuf.py", line 196, in main
> module = generateProto(attrFinder.tagAttrs, attrFinder.depthTags,
> File "/Users/sumo/clangMacOS_M1/sumo/tools/xml/xml2protobuf.py", line 185, in generateProto
> subprocess.call([protoc, "%s.proto" % base, "--python_out=%s" % protodir])
> File "/opt/homebrew/Cellar/python@3.9/3.9.12_1/Frameworks/Python.framework/Versions/3.9/lib/python3.9/subprocess.py", line 349, in call
> with Popen(*popenargs, **kwargs) as p:
> File "/opt/homebrew/Cellar/python@3.9/3.9.12_1/Frameworks/Python.framework/Versions/3.9/lib/python3.9/subprocess.py", line 951, in __init__
> self._execute_child(args, executable, preexec_fn, close_fds,
> File "/opt/homebrew/Cellar/python@3.9/3.9.12_1/Frameworks/Python.framework/Versions/3.9/lib/python3.9/subprocess.py", line 1821, in _execute_child
> raise child_exception_type(errno_num, err_msg, err_filename)
> FileNotFoundError: [Errno 2] No such file or directory: 'protoc'
> Traceback (most recent call last):
> File "/Users/sumo/clangMacOS_M1/sumo/tests/../tests/complex/sumo/protobuf/runner.py", line 82, in <module>
> connect(IN_PORT, OUT_PORT)
> File "/Users/sumo/clangMacOS_M1/sumo/tests/../tests/complex/sumo/protobuf/runner.py", line 38, in connect
> i.connect(("localhost", inPort))
> ConnectionRefusedError: [Errno 61] Connection refused
---------- Differences in output ----------
1,5d0
< ---
< +++
< -
< -<trajectories xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/amitran/trajectories.xsd" timeStepSize="1000">
< +<trajectories timeStepSize="1000">
---------- Differences in errors ---------- 1,2d0 < Error: send failed: Software caused tcpip::Socket abort < Quitting (on error).
---------- Differences in errors ----------
1,8c1,4
< Warning: Teleporting vehicle '7'; collision with vehicle '6', lane='1/1to2/1_0', gap=-0.73, time=5.00 stage=move.
< Warning: Vehicle '7' ends teleporting on edge '2/1to3/1', time=5.00.
< Warning: Teleporting vehicle '17'; collision with vehicle '16', lane='1/1to2/1_0', gap=-0.28, time=24.00 stage=move.
< Warning: Vehicle '17' ends teleporting on edge '2/1to3/1', time=24.00.
< Warning: Teleporting vehicle '24'; collision with vehicle '23', lane='1/1to2/1_0', gap=-0.37, time=51.00 stage=move.
< Warning: Vehicle '24' ends teleporting on edge '2/1to3/1', time=51.00.
< Warning: Teleporting vehicle '19'; collision with vehicle '18', lane='1/1to2/1_0', gap=-0.28, time=54.00 stage=move.
< Warning: Vehicle '19' ends teleporting on edge '2/1to3/1', time=54.00.
---
> Traceback (most recent call last):
> File "/Users/sumo/clangMacOS_M1/sumo/tests/../tests/complex/sumo/speedMap/runner.py", line 26, in <module>
> import matplotlib
> ModuleNotFoundError: No module named 'matplotlib'
---------- Missing result in state ----------
<?xml version="1.0" encoding="UTF-8"?>
<netstate xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/netstate_file.xsd">
<timestep time="0.00">
<edge id="1/1to2/1">
<lane id="1/1to2/1_0">
<vehicle id="24" pos="308.00" speed="0.00"/>
<vehicle id="23" pos="316.00" speed="0.00"/>
<vehicle id="22" pos="324.00" speed="0.00"/>
<vehicle id="21" pos="332.00" speed="0.00"/>
<vehicle id="20" pos="340.00" speed="0.00"/>
<vehicle id="19" pos="348.00" speed="0.00"/>
<vehicle id="18" pos="356.00" speed="0.00"/>
<vehicle id="17" pos="364.00" speed="0.00"/>
<vehicle id="16" pos="372.00" speed="0.00"/>
<vehicle id="15" pos="380.00" speed="0.00"/>
<vehicle id="14" pos="388.00" speed="0.00"/>
<vehicle id="13" pos="396.00" speed="0.00"/>
<vehicle id="12" pos="404.00" speed="0.00"/>
<vehicle id="11" pos="412.00" speed="0.00"/>
<vehicle id="10" pos="420.00" speed="0.00"/>
<vehicle id="9" pos="428.00" speed="0.00"/>
<vehicle id="8" pos="436.00" speed="0.00"/>
<vehicle id="7" pos="444.00" speed="0.00"/>
<vehicle id="6" pos="452.00" speed="0.00"/>
<vehicle id="5" pos="460.00" speed="0.00"/>
<vehicle id="4" pos="468.00" speed="0.00"/>
<vehicle id="3" pos="476.00" speed="0.00"/>
<vehicle id="2" pos="484.00" speed="0.00"/>
<truncated after showing first 30 lines>
---------- Differences in errors ----------
0a1,5
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> Traceback (most recent call last):
> raise FatalTraCIError("Could not connect in %s tries" % (numRetries + 1))
> traci.exceptions.FatalTraCIError: Could not connect in 61 tries
---------- Differences in output ----------
3,15d2
< Print ended at step 100.0
< ----------- SUMO end time is not given -----------
< Print ended at step 100.0
< =========== empty routes in SUMO ===========
< ----------- SUMO end time is smaller than TraCI's -----------
< Print ended at step 100.0
< ----------- SUMO end time is not given -----------
< Print ended at step 100.0
< =========== vehicle leaves before TraCI ends ===========
< ----------- SUMO end time is smaller than TraCI's -----------
< Print ended at step 100.0
< ----------- SUMO end time is not given -----------
< Print ended at step 100.0
---------- Differences in errors ----------
0a1,245
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
<truncated after showing first 30 lines>
---------- Missing result in state ----------
<?xml version="1.0" encoding="UTF-8"?>
<netstate xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/netstate_file.xsd">
<timestep time="0.00">
<edge id="2fi">
<lane id="2fi_0">
<vehicle id="horiz" pos="5.10" speed="0.00"/>
</lane>
</edge>
</timestep>
<timestep time="1.00">
<edge id="2fi">
<lane id="2fi_0">
<vehicle id="horiz" pos="6.53" speed="1.43"/>
</lane>
</edge>
</timestep>
<timestep time="2.00">
<edge id="2fi">
<lane id="2fi_0">
<vehicle id="horiz" pos="10.57" speed="4.03"/>
</lane>
</edge>
</timestep>
<timestep time="3.00">
<edge id="2fi">
<lane id="2fi_0">
<vehicle id="horiz" pos="16.77" speed="6.21"/>
</lane>
<truncated after showing first 30 lines>
---------- Missing result in tripinfo ----------
<?xml version="1.0" encoding="UTF-8"?>
<tripinfos xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/tripinfo_file.xsd">
</tripinfos>
---------- Differences in errors ----------
0a1,128
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> Process Process-1:
> Traceback (most recent call last):
> raise FatalTraCIError("Could not connect in %s tries" % (numRetries + 1))
> traci.exceptions.FatalTraCIError: Could not connect in 61 tries
> Process Process-2:
> Traceback (most recent call last):
> raise FatalTraCIError("Could not connect in %s tries" % (numRetries + 1))
> traci.exceptions.FatalTraCIError: Could not connect in 61 tries
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> Process Process-3:
> Traceback (most recent call last):
> raise FatalTraCIError("Could not connect in %s tries" % (numRetries + 1))
> traci.exceptions.FatalTraCIError: Could not connect in 61 tries
> Process Process-4:
> Traceback (most recent call last):
> raise FatalTraCIError("Could not connect in %s tries" % (numRetries + 1))
> traci.exceptions.FatalTraCIError: Could not connect in 61 tries
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> Process Process-5:
> Traceback (most recent call last):
> raise FatalTraCIError("Could not connect in %s tries" % (numRetries + 1))
> traci.exceptions.FatalTraCIError: Could not connect in 61 tries
> Process Process-6:
> Traceback (most recent call last):
> raise FatalTraCIError("Could not connect in %s tries" % (numRetries + 1))
<truncated after showing first 30 lines>
---------- Differences in output ----------
15,44d14
< -- Unordered text as found by filter 'Process [0-9]' --
< Process 1 ended at step 99
< Process 1 ended at step 99
< Process 1 ended at step 99
< Process 1 ended at step 99
< Process 1 ended at step 99
< Process 1 ended at step 99
< Process 1 ended at step 99
< Process 1 ended at step 99
< Process 2 ended at step 99
< Process 2 ended at step 99
< Process 2 ended at step 99
< Process 2 ended at step 99
< Process 2 ended at step 99
< Process 2 ended at step 99
< Process 2 ended at step 99
< Process 2 ended at step 99
< Process 3 ended at step 99
< Process 3 ended at step 99
< Process 3 ended at step 99
< Process 3 ended at step 99
< Process 4 ended at step 99
< Process 4 ended at step 99
< Process 4 ended at step 99
< Process 4 ended at step 99
< Process 5 ended at step 99
< Process 5 ended at step 99
< Process 5 ended at step 99
< Process 5 ended at step 99
<truncated after showing first 30 lines>
---------- Differences in errors ----------
0a1,5
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> Traceback (most recent call last):
> raise FatalTraCIError("Could not connect.")
> traci.exceptions.FatalTraCIError: Could not connect.
---------- Differences in output ----------
3,16d2
< Run 1
< Run 2
< Print ended at step 100.0
< Print ended at step 100.0
< Print ended at step 100.0
< Connection already closed.
< ----------- TraCI ends first -----------
< Run 0
< Run 1
< Run 2
< Print ended at step 100.0
< Print ended at step 100.0
< Print ended at step 100.0
< Connection '2' is not known.
---------- Differences in errors ----------
0a1,5
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> Traceback (most recent call last):
> raise FatalTraCIError("Could not connect in %s tries" % (numRetries + 1))
> traci.exceptions.FatalTraCIError: Could not connect in 61 tries
---------- Differences in output ----------
3,42d2
< Print ended at step 100.0
< Run 1
< Print ended at step 100.0
< Run 2
< Print ended at step 100.0
< Run 3
< Print ended at step 100.0
< Run 4
< Print ended at step 100.0
< Run 5
< Print ended at step 100.0
< Run 6
< Print ended at step 100.0
< Run 7
< Print ended at step 100.0
< Run 8
< Print ended at step 100.0
< Run 9
< Print ended at step 100.0
< ----------- TraCI ends first -----------
< Run 0
< Print ended at step 100.0
< Run 1
< Print ended at step 100.0
< Run 2
< Print ended at step 100.0
< Run 3
< Print ended at step 100.0
< Run 4
<truncated after showing first 30 lines>
---------- Differences in errors ----------
6a7,11
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> Traceback (most recent call last):
> raise FatalTraCIError("Could not connect in %s tries" % (numRetries + 1))
> traci.exceptions.FatalTraCIError: Could not connect in 61 tries
---------- Differences in output ----------
2,4d1
< -- Unordered text as found by filter '^Loading configuration ... done.' --
< Loading configuration ... done.
<
---------- Differences in errors ----------
0a1,4
> Traceback (most recent call last):
> File "/Users/sumo/clangMacOS_M1/sumo/tests/../tests/complex/traci/gui/gui/runner.py", line 26, in <module>
> from matplotlib.pyplot import imread
> ModuleNotFoundError: No module named 'matplotlib'
---------- Differences in output ----------
1,29d0
< step 0
< step 1
< step 2
< hasGUI True
< views ('View #0',)
< examining View #0
< set zoom (80.0)
< get zoom 80.0
< set offset (400.0, 400.0)
< get offset (400.0, 400.0)
< set schema ('real world')
< get schema real world
< visible boundary ((-805.859375, -230.0), (1605.859375, 1030.0))
< has view View #0 True
< has view 'foo' False
< track vehicle 'horiz'
< get tracked vehicle horiz
< {0: ('View #0',)}
< step 3
< {0: ('View #0',)}
< step 4
< {0: ('View #0',)}
< step 5
< {0: ('View #0',)}
< veh selected: False
< edge selected: False
< veh selected: True
< edge selected: True
< screenshot dimensions (500, 500, 4)
<truncated after showing first 30 lines>
---------- Differences in errors ----------
0a1,245
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
<truncated after showing first 30 lines>
---------- Differences in output ----------
1,256d0
< step 0
< step 1
< step 2
< adding poly0
< polygons ('poly0',)
< polygon count 1
< # examining poly0
< shape ((960.0, 510.0), (960.0, 550.0), (1000.0, 550.0), (1000.0, 510.0))
< type test
< color (100, 200, 0, 255)
< filled True
< step 3
< step 4
< step 5
< # (1) Adding underspecified dynamics...
< Caught TraCIException
< # (2) Adding malformed dynamics 1 ...
< Caught TraCIException
< # (3) Adding malformed dynamics 2 ...
< Caught TraCIException
< # (4) Adding malformed dynamics 3 ...
< Caught TraCIException
< # (5) Adding malformed dynamics 4 ...
< Caught TraCIException
< # (6) Adding malformed dynamics 5 ...
< Caught TraCIException
< # examining poly0
< shape ((960.0, 510.0), (960.0, 550.0), (1000.0, 550.0), (1000.0, 510.0))
< type test
<truncated after showing first 30 lines>
---------- Differences in errors ----------
0a1,245
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
> warnings.warn(("Could not connect to TraCI server using port %s (%s)." +
> Error: This system has no OpenGL support. Exiting.
> Quitting (on error).
<truncated after showing first 30 lines>
---------- Differences in errors ---------- 0a1,8 > Traceback (most recent call last): > File "/Users/sumo/clangMacOS_M1/sumo/tests/../tests/complex/traci/misc/libsumo_option_list_append/runner.py", line 28, in <module> > import libsumo # noqa > File "/Users/sumo/clangMacOS_M1/sumo/tools/libsumo/__init__.py", line 29, in <module> > from .libsumo import vehicle, simulation, person, trafficlight # noqa > File "/Users/sumo/clangMacOS_M1/sumo/tools/libsumo/libsumo.py", line 13, in <module> > from . import _libsumo > ImportError: dlopen(/Users/sumo/clangMacOS_M1/sumo/tools/libsumo/_libsumo.so, 0x0002): tried: '/Users/sumo/clangMacOS_M1/sumo/tools/libsumo/_libsumo.so' (not a mach-o file) ---------- Differences in output ---------- 1,12d0 < Loading net-file from 'input_net.net.xml' ... done ((TIME)). < Loading additional-files from 'input_additional2.add.xml' ... done ((TIME)). < Loading additional-files from 'input_additional.add.xml' ... done ((TIME)). < Loading done. < Simulation started via Libsumo with time: 0.00 < Reason: Libsumo requested termination. < -- Unordered text as found by filter '^Simulation ended at time:' -- < Simulation ended at time: 10.00 < < -- Unordered text as found by filter '^Loading configuration ... done.' -- < Loading configuration ... done. <
---------- Differences in errors ---------- 2a3 > Warning: Invalid approach information to rail signal 'junction 'N2', link 0' after rerouting for vehicle 'rail5' first driveway edge 'T9_0' time=502.00.
---------- Differences in errors ---------- 0a1,10 > Traceback (most recent call last): > File "/Users/sumo/clangMacOS_M1/sumo/tests/toolrunner.py", line 39, in <module> > subprocess.call(tool + sys.argv[1:], env=os.environ, stdout=sys.stdout, stderr=sys.stderr) > File "/opt/homebrew/Cellar/python@3.9/3.9.12_1/Frameworks/Python.framework/Versions/3.9/lib/python3.9/subprocess.py", line 349, in call > with Popen(*popenargs, **kwargs) as p: > File "/opt/homebrew/Cellar/python@3.9/3.9.12_1/Frameworks/Python.framework/Versions/3.9/lib/python3.9/subprocess.py", line 951, in __init__ > self._execute_child(args, executable, preexec_fn, close_fds, > File "/opt/homebrew/Cellar/python@3.9/3.9.12_1/Frameworks/Python.framework/Versions/3.9/lib/python3.9/subprocess.py", line 1821, in _execute_child > raise child_exception_type(errno_num, err_msg, err_filename) > FileNotFoundError: [Errno 2] No such file or directory: '/Users/sumo/clangMacOS_M1/sumo/tests/../bin/testcommon' ---------- Differences in output ---------- 1,111d0 < Running main() from gtest_main.cc < [==========] Running 45 tests from 5 test suites. < [----------] Global test environment set-up. < [----------] 10 tests from StringTokenizer < [ RUN ] StringTokenizer.test_split_with_whitechar < [ OK ] StringTokenizer.test_split_with_whitechar ((TIME)) < [ RUN ] StringTokenizer.test_split_with_newline < [ OK ] StringTokenizer.test_split_with_newline ((TIME)) < [ RUN ] StringTokenizer.test_split_with_x < [ OK ] StringTokenizer.test_split_with_x ((TIME)) < [ RUN ] StringTokenizer.test_split_any_char < [ OK ] StringTokenizer.test_split_any_char ((TIME)) < [ RUN ] StringTokenizer.test_method_reinit < [ OK ] StringTokenizer.test_method_reinit ((TIME)) < [ RUN ] StringTokenizer.test_method_size < [ OK ] StringTokenizer.test_method_size ((TIME)) < [ RUN ] StringTokenizer.test_method_front < [ OK ] StringTokenizer.test_method_front ((TIME)) < [ RUN ] StringTokenizer.test_method_get < [ OK ] StringTokenizer.test_method_get ((TIME)) < [ RUN ] StringTokenizer.test_method_get_with_empty_data < [ OK ] StringTokenizer.test_method_get_with_empty_data ((TIME)) < [ RUN ] StringTokenizer.test_method_getVector < [ OK ] StringTokenizer.test_method_getVector ((TIME)) < [----------] 10 tests from StringTokenizer ((TIME) total) < < [----------] 4 tests from FileHelpers < [ RUN ] FileHelpers.test_method_checkForRelativity < [ OK ] FileHelpers.test_method_checkForRelativity ((TIME)) <truncated after showing first 30 lines> ---------- New result in exitcode ---------- 1
---------- Differences in errors ---------- 0a1,10 > Traceback (most recent call last): > File "/Users/sumo/clangMacOS_M1/sumo/tests/toolrunner.py", line 39, in <module> > subprocess.call(tool + sys.argv[1:], env=os.environ, stdout=sys.stdout, stderr=sys.stderr) > File "/opt/homebrew/Cellar/python@3.9/3.9.12_1/Frameworks/Python.framework/Versions/3.9/lib/python3.9/subprocess.py", line 349, in call > with Popen(*popenargs, **kwargs) as p: > File "/opt/homebrew/Cellar/python@3.9/3.9.12_1/Frameworks/Python.framework/Versions/3.9/lib/python3.9/subprocess.py", line 951, in __init__ > self._execute_child(args, executable, preexec_fn, close_fds, > File "/opt/homebrew/Cellar/python@3.9/3.9.12_1/Frameworks/Python.framework/Versions/3.9/lib/python3.9/subprocess.py", line 1821, in _execute_child > raise child_exception_type(errno_num, err_msg, err_filename) > FileNotFoundError: [Errno 2] No such file or directory: '/Users/sumo/clangMacOS_M1/sumo/tests/../bin/testfoxtools' ---------- Differences in output ---------- 1,13d0 < Running main() from gtest_main.cc < [==========] Running 2 tests from 1 test suite. < [----------] Global test environment set-up. < [----------] 2 tests from FXWorkerThread < [ RUN ] FXWorkerThread.test_init < [ OK ] FXWorkerThread.test_init ((TIME)) < [ RUN ] FXWorkerThread.test_get_all < [ OK ] FXWorkerThread.test_get_all ((TIME)) < [----------] 2 tests from FXWorkerThread ((TIME) total) < < [----------] Global test environment tear-down < [==========] 2 tests from 1 test suite ran. ((TIME) total) < [ PASSED ] 2 tests. ---------- New result in exitcode ---------- 1
---------- Differences in errors ---------- 0a1,10 > Traceback (most recent call last): > File "/Users/sumo/clangMacOS_M1/sumo/tests/toolrunner.py", line 39, in <module> > subprocess.call(tool + sys.argv[1:], env=os.environ, stdout=sys.stdout, stderr=sys.stderr) > File "/opt/homebrew/Cellar/python@3.9/3.9.12_1/Frameworks/Python.framework/Versions/3.9/lib/python3.9/subprocess.py", line 349, in call > with Popen(*popenargs, **kwargs) as p: > File "/opt/homebrew/Cellar/python@3.9/3.9.12_1/Frameworks/Python.framework/Versions/3.9/lib/python3.9/subprocess.py", line 951, in __init__ > self._execute_child(args, executable, preexec_fn, close_fds, > File "/opt/homebrew/Cellar/python@3.9/3.9.12_1/Frameworks/Python.framework/Versions/3.9/lib/python3.9/subprocess.py", line 1821, in _execute_child > raise child_exception_type(errno_num, err_msg, err_filename) > FileNotFoundError: [Errno 2] No such file or directory: '/Users/sumo/clangMacOS_M1/sumo/tests/../bin/testgeom' ---------- Differences in output ---------- 1,71d0 < Running main() from gtest_main.cc < [==========] Running 28 tests from 3 test suites. < [----------] Global test environment set-up. < [----------] 12 tests from Boundary < [ RUN ] Boundary.test_method_add < [ OK ] Boundary.test_method_add ((TIME)) < [ RUN ] Boundary.test_method_add_multiple < [ OK ] Boundary.test_method_add_multiple ((TIME)) < [ RUN ] Boundary.test_method_getCenter < [ OK ] Boundary.test_method_getCenter ((TIME)) < [ RUN ] Boundary.test_method_getWidthHeight < [ OK ] Boundary.test_method_getWidthHeight ((TIME)) < [ RUN ] Boundary.test_method_around < [ OK ] Boundary.test_method_around ((TIME)) < [ RUN ] Boundary.test_method_overlapsWith < [ OK ] Boundary.test_method_overlapsWith ((TIME)) < [ RUN ] Boundary.test_method_crosses < [ OK ] Boundary.test_method_crosses ((TIME)) < [ RUN ] Boundary.test_method_partialWithin < [ OK ] Boundary.test_method_partialWithin ((TIME)) < [ RUN ] Boundary.test_method_flipY < [ OK ] Boundary.test_method_flipY ((TIME)) < [ RUN ] Boundary.test_method_moveby < [ OK ] Boundary.test_method_moveby ((TIME)) < [ RUN ] Boundary.test_method_growWidth < [ OK ] Boundary.test_method_growWidth ((TIME)) < [ RUN ] Boundary.test_method_growHeight < [ OK ] Boundary.test_method_growHeight ((TIME)) < [----------] 12 tests from Boundary ((TIME) total) <truncated after showing first 30 lines> ---------- New result in exitcode ---------- 1
---------- Differences in errors ---------- 0a1,10 > Traceback (most recent call last): > File "/Users/sumo/clangMacOS_M1/sumo/tests/toolrunner.py", line 39, in <module> > subprocess.call(tool + sys.argv[1:], env=os.environ, stdout=sys.stdout, stderr=sys.stderr) > File "/opt/homebrew/Cellar/python@3.9/3.9.12_1/Frameworks/Python.framework/Versions/3.9/lib/python3.9/subprocess.py", line 349, in call > with Popen(*popenargs, **kwargs) as p: > File "/opt/homebrew/Cellar/python@3.9/3.9.12_1/Frameworks/Python.framework/Versions/3.9/lib/python3.9/subprocess.py", line 951, in __init__ > self._execute_child(args, executable, preexec_fn, close_fds, > File "/opt/homebrew/Cellar/python@3.9/3.9.12_1/Frameworks/Python.framework/Versions/3.9/lib/python3.9/subprocess.py", line 1821, in _execute_child > raise child_exception_type(errno_num, err_msg, err_filename) > FileNotFoundError: [Errno 2] No such file or directory: '/Users/sumo/clangMacOS_M1/sumo/tests/../bin/testmicrosim' ---------- Differences in output ---------- 1,29d0 < Running main() from gtest_main.cc < [==========] Running 7 tests from 3 test suites. < [----------] Global test environment set-up. < [----------] 1 test from MSEventControl < [ RUN ] MSEventControl.test_method_execute < [ OK ] MSEventControl.test_method_execute ((TIME)) < [----------] 1 test from MSEventControl ((TIME) total) < < [----------] 4 tests from MSCFModelTest < [ RUN ] MSCFModelTest.test_method_brakeGap < [ OK ] MSCFModelTest.test_method_brakeGap ((TIME)) < [ RUN ] MSCFModelTest.test_method_static_brakeGap < [ OK ] MSCFModelTest.test_method_static_brakeGap ((TIME)) < [ RUN ] MSCFModelTest.test_method_static_freeSpeed < [ OK ] MSCFModelTest.test_method_static_freeSpeed ((TIME)) < [ RUN ] MSCFModelTest.test_method_static_freeSpeed_half < [ OK ] MSCFModelTest.test_method_static_freeSpeed_half ((TIME)) < [----------] 4 tests from MSCFModelTest ((TIME) total) < < [----------] 2 tests from MSCFModel_IDMTest < [ RUN ] MSCFModel_IDMTest.test_method_brakeGap < [ OK ] MSCFModel_IDMTest.test_method_brakeGap ((TIME)) < [ RUN ] MSCFModel_IDMTest.test_method_getSecureGap < [ OK ] MSCFModel_IDMTest.test_method_getSecureGap ((TIME)) < [----------] 2 tests from MSCFModel_IDMTest ((TIME) total) < < [----------] Global test environment tear-down < [==========] 7 tests from 3 test suites ran. ((TIME) total) < [ PASSED ] 7 tests. <truncated after showing first 30 lines> ---------- New result in exitcode ---------- 1
---------- Differences in errors ---------- 0a1,10 > Traceback (most recent call last): > File "/Users/sumo/clangMacOS_M1/sumo/tests/toolrunner.py", line 39, in <module> > subprocess.call(tool + sys.argv[1:], env=os.environ, stdout=sys.stdout, stderr=sys.stderr) > File "/opt/homebrew/Cellar/python@3.9/3.9.12_1/Frameworks/Python.framework/Versions/3.9/lib/python3.9/subprocess.py", line 349, in call > with Popen(*popenargs, **kwargs) as p: > File "/opt/homebrew/Cellar/python@3.9/3.9.12_1/Frameworks/Python.framework/Versions/3.9/lib/python3.9/subprocess.py", line 951, in __init__ > self._execute_child(args, executable, preexec_fn, close_fds, > File "/opt/homebrew/Cellar/python@3.9/3.9.12_1/Frameworks/Python.framework/Versions/3.9/lib/python3.9/subprocess.py", line 1821, in _execute_child > raise child_exception_type(errno_num, err_msg, err_filename) > FileNotFoundError: [Errno 2] No such file or directory: '/Users/sumo/clangMacOS_M1/sumo/tests/../bin/testnetbuild' ---------- Differences in output ---------- 1,16d0 < Running main() from gtest_main.cc < [==========] Running 2 tests from 2 test suites. < [----------] Global test environment set-up. < [----------] 1 test from NBHeightMapperTest < [ RUN ] NBHeightMapperTest.test_method_getZ < [ OK ] NBHeightMapperTest.test_method_getZ ((TIME)) < [----------] 1 test from NBHeightMapperTest ((TIME) total) < < [----------] 1 test from NBTrafficLightLogic < [ RUN ] NBTrafficLightLogic.test_method_getDuration < [ OK ] NBTrafficLightLogic.test_method_getDuration ((TIME)) < [----------] 1 test from NBTrafficLightLogic ((TIME) total) < < [----------] Global test environment tear-down < [==========] 2 tests from 2 test suites ran. ((TIME) total) < [ PASSED ] 2 tests. ---------- New result in exitcode ---------- 1
dynamic ToC triggered despite stop present on vehicle's lane continuation (This bug was triggered by text found in file 'tocs' matching 'DYNTOR')
different outputs from detectors which should detect the same (This bug was triggered by text found in file 'output' matching 'failed') ---------- Differences in output ---------- 5,7c5,7 < success 0.1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0'] < success 1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0'] < success 10 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0'] --- > failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (71.4, 71.5) <zip object at 0x1045417c0> > failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (72.0, 73.0) <zip object at 0x10455a240> > failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) <zip object at 0x10453c5c0> 9,12c9,12 < success 0.1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0'] < success 1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0'] < success 10 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0'] < success 100 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0'] --- > failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (71.4, 71.5) <zip object at 0x104521700> > failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (72.0, 73.0) <zip object at 0x104586880> > failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (80.0, 90.0) <zip object at 0x104546bc0> > failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (100.0, 200.0) <zip object at 0x104546a80> 17,19c17,19 < success 0.1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0'] < success 1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0'] < success 10 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0'] --- > failed 0.1 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (73.0, 74.0) <zip object at 0x1045461c0> > failed 1 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (73.0, 74.0) <zip object at 0x104546680> > failed 10 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) <zip object at 0x104546180> 21,50c21,24 < success 0.1 ['--step-length', '1', '--end', '1000'] ['3/1to2/1_0'] < success 1 ['--step-length', '1', '--end', '1000'] ['3/1to2/1_0'] < success 10 ['--step-length', '1', '--end', '1000'] ['3/1to2/1_0'] <truncated after showing first 30 lines>
different outputs from detectors which should detect the same (This bug was triggered by text found in file 'output' matching 'failed') ---------- Differences in output ---------- 1,98c1,48 < success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0'] < success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0'] < success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0'] < success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0'] < success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0'] < success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0'] < success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0'] < success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0'] < success ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0'] < success ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0'] < success ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0'] < success ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0'] < success ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0'] < success ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0'] < success ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0'] < success ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0'] < failed ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (108.6, 108.7) [9.9, 10.0, 9.9, 9.9] < failed ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (108.6, 108.7) [9.9, 10.0, 9.9, 9.9] < failed ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (108.0, 109.0) [9.87, 10.0, 9.87, 9.87] < failed ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (108.0, 109.0) [9.87, 10.0, 9.87, 9.87] < failed ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (100.0, 110.0) [9.85, 9.96, 9.85, 9.85] < failed ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (100.0, 110.0) [9.85, 9.96, 9.85, 9.85] < failed ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (100.0, 200.0) [-1.0, 2.26, 3.2, 2.27, 2.27] < failed ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (100.0, 200.0) [-1.0, 2.26, 3.2, 2.27, 2.27] < success ['--step-length', '1', '--end', '51'] ['2/1to1/1_0'] < success ['--step-length', '1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0'] < success ['--step-length', '1', '--end', '51'] ['2/1to1/1_0'] < success ['--step-length', '1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0'] < success ['--step-length', '1', '--end', '51'] ['2/1to1/1_0'] <truncated after showing first 30 lines>
different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
17,24c17,24
< success 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (230.0, 230.1) [('e2', 9.99), ('e3', 10.0), ('edge', 9.99), ('lane', 9.99)]
< success 0.1 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (148.1, 148.2) [('e2', 9.99), ('e3', 10.0), ('edge', 9.99), ('lane', 9.99)]
< success 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (230.0, 231.0) [('e2', 9.99), ('e3', 10.0), ('edge', 9.99), ('lane', 9.99)]
< success 1 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (148.0, 149.0) [('e2', 9.91), ('e3', 10.0), ('edge', 9.91), ('lane', 9.91)]
< success 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (230.0, 240.0) [('e2', 9.42), ('e3', 9.9), ('edge', 9.42), ('lane', 9.42)]
< success 10 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (140.0, 150.0) [('e2', 9.96), ('e3', 9.99), ('edge', 9.96), ('lane', 9.96)]
< success 100 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (200.0, 300.0) [('e1', 10.0), ('e2', 9.22), ('e3', 5.71), ('edge', 9.22), ('lane', 9.22)]
< success 100 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (100.0, 200.0) [('e1', 9.53), ('e2', 5.82), ('e3', 6.93), ('edge', 5.82), ('lane', 5.82)]
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (148.9, 149.0) <zip object at 0x103262040>
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (148.9, 149.0) <zip object at 0x103297dc0>
> failed 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (149.0, 150.0) <zip object at 0x103514a80>
> failed 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (149.0, 150.0) <zip object at 0x1036994c0>
> failed 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (140.0, 150.0) <zip object at 0x10328b540>
> failed 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (140.0, 150.0) <zip object at 0x10328b400>
> failed 100 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (100.0, 200.0) <zip object at 0x10328be40>
> failed 100 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (100.0, 200.0) <zip object at 0x10328b140>
41,98c41,48
< success 0.1 ['--step-length', '1', '--end', '1000'] 2/1to1/1_0 (245.0, 246.0) [('e2', 8.92), ('e3', 10.0), ('edge', 8.92), ('lane', 8.92)]
< success 0.1 ['--step-length', '1', '--end', '1000'] 1/1to0/1_0 (150.0, 151.0) [('e2', 9.82), ('e3', 10.0), ('edge', 9.82), ('lane', 9.82)]
< success 1 ['--step-length', '1', '--end', '1000'] 2/1to1/1_0 (245.0, 246.0) [('e2', 8.92), ('e3', 10.0), ('edge', 8.92), ('lane', 8.92)]
< success 1 ['--step-length', '1', '--end', '1000'] 1/1to0/1_0 (150.0, 151.0) [('e2', 9.82), ('e3', 10.0), ('edge', 9.82), ('lane', 9.82)]
< success 10 ['--step-length', '1', '--end', '1000'] 2/1to1/1_0 (240.0, 250.0) [('e2', 9.9), ('e3', 10.0), ('edge', 9.9), ('lane', 9.9)]
< success 10 ['--step-length', '1', '--end', '1000'] 1/1to0/1_0 (150.0, 160.0) [('e2', 9.15), ('e3', 9.84), ('edge', 9.15), ('lane', 9.15)]
< success 100 ['--step-length', '1', '--end', '1000'] 2/1to1/1_0 (200.0, 300.0) [('e1', 10.0), ('e2', 9.41), ('e3', 5.84), ('edge', 9.41), ('lane', 9.41)]
< success 100 ['--step-length', '1', '--end', '1000'] 1/1to0/1_0 (100.0, 200.0) [('e1', 10.0), ('e2', 5.94), ('e3', 7.08), ('edge', 5.94), ('lane', 5.94)]
< -- Unordered text as found by filter '^Loading configuration ... done.' --
< Loading configuration ... done.
< Loading configuration ... done.
<truncated after showing first 30 lines>
different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
9,24c9,24
< failed 0.1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.2, 76.3) [('e2', 10.49), ('e3', 10.35), ('edge', 10.49), ('lane', 10.49)]
< failed 0.1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.2, 76.3) [('e2', 10.49), ('e3', 10.35), ('edge', 10.49), ('lane', 10.49)]
< failed 1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.0, 77.0) [('e2', 10.39), ('e3', 10.35), ('edge', 10.39), ('lane', 10.39)]
< failed 1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.0, 77.0) [('e2', 10.39), ('e3', 10.35), ('edge', 10.39), ('lane', 10.39)]
< failed 10 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.0, 80.0) [('e2', 10.42), ('e3', 10.25), ('edge', 10.42), ('lane', 10.42)]
< failed 10 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.0, 80.0) [('e2', 10.42), ('e3', 10.25), ('edge', 10.42), ('lane', 10.42)]
< failed 100 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (0.0, 100.0) [('e1', 10.27), ('e2', 10.24), ('e3', 9.59), ('edge', 10.24), ('lane', 10.24)]
< failed 100 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (0.0, 100.0) [('e1', 10.27), ('e2', 10.24), ('e3', 9.59), ('edge', 10.24), ('lane', 10.24)]
< failed 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (76.2, 76.3) [('e2', 10.49), ('e3', 10.35), ('edge', 10.49), ('lane', 10.49)]
< failed 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (76.2, 76.3) [('e2', 10.49), ('e3', 10.35), ('edge', 10.49), ('lane', 10.49)]
< failed 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (76.0, 77.0) [('e2', 10.39), ('e3', 10.35), ('edge', 10.39), ('lane', 10.39)]
< failed 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (76.0, 77.0) [('e2', 10.39), ('e3', 10.35), ('edge', 10.39), ('lane', 10.39)]
< failed 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (70.0, 80.0) [('e2', 10.42), ('e3', 10.25), ('edge', 10.42), ('lane', 10.42)]
< failed 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (70.0, 80.0) [('e2', 10.42), ('e3', 10.25), ('edge', 10.42), ('lane', 10.42)]
< failed 100 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (0.0, 100.0) [('e1', 10.27), ('e2', 10.24), ('e3', 9.59), ('edge', 10.24), ('lane', 10.24)]
< failed 100 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (0.0, 100.0) [('e1', 10.27), ('e2', 10.24), ('e3', 9.59), ('edge', 10.24), ('lane', 10.24)]
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.9, 71.0) <zip object at 0x104a0b3c0>
> failed 0.1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.9, 71.0) <zip object at 0x1049d3100>
> failed 1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.0, 71.0) <zip object at 0x1049f76c0>
> failed 1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.0, 71.0) <zip object at 0x1049f71c0>
> failed 10 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.0, 80.0) <zip object at 0x1049f77c0>
> failed 10 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.0, 80.0) <zip object at 0x1049f75c0>
> failed 100 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (0.0, 100.0) <zip object at 0x104a21280>
> failed 100 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (0.0, 100.0) <zip object at 0x1049f7480>
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (70.9, 71.0) <zip object at 0x1049f79c0>
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (70.9, 71.0) <zip object at 0x104a4aac0>
> failed 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (70.0, 71.0) <zip object at 0x105057100>
> failed 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (70.0, 71.0) <zip object at 0x104ce8d40>
<truncated after showing first 30 lines>
different outputs from detectors which should detect the same (This bug was triggered by text found in file 'output' matching 'failed') ---------- Differences in output ---------- 5,7c5,7 < success 0.1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0'] < success 1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0'] < success 10 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0'] --- > failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (75.4, 75.5) <zip object at 0x104bdaf80> > failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (76.0, 77.0) <zip object at 0x104babd80> > failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) <zip object at 0x104bab580> 9,12c9,12 < success 0.1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0'] < success 1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0'] < success 10 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0'] < success 100 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0'] --- > failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (75.4, 75.5) <zip object at 0x104bc19c0> > failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (76.0, 77.0) <zip object at 0x104c173c0> > failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (80.0, 90.0) <zip object at 0x104c17700> > failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (100.0, 200.0) <zip object at 0x104c176c0> 17,19c17,19 < success 0.1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0'] < success 1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0'] < success 10 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0'] --- > failed 0.1 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (77.0, 78.0) <zip object at 0x104c17ac0> > failed 1 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (77.0, 78.0) <zip object at 0x104c10300> > failed 10 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) <zip object at 0x104c10a80> 21,50c21,24 < success 0.1 ['--step-length', '1', '--end', '1000'] ['3/1to2/1_0'] < success 1 ['--step-length', '1', '--end', '1000'] ['3/1to2/1_0'] < success 10 ['--step-length', '1', '--end', '1000'] ['3/1to2/1_0'] <truncated after showing first 30 lines>
different outputs from detectors which should detect the same (This bug was triggered by text found in file 'output' matching 'failed') ---------- Differences in output ---------- 5,7c5,7 < success 0.1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0'] < success 1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0'] < success 10 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0'] --- > failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (76.4, 76.5) <zip object at 0x107495c80> > failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (77.0, 78.0) <zip object at 0x107473640> > failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) <zip object at 0x107473800> 9,12c9,12 < success 0.1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0'] < success 1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0'] < success 10 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0'] < success 100 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0'] --- > failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (76.4, 76.5) <zip object at 0x1074a2300> > failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (77.0, 78.0) <zip object at 0x1074df600> > failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (80.0, 90.0) <zip object at 0x1074df600> > failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (100.0, 200.0) <zip object at 0x1074c93c0> 17,19c17,19 < success 0.1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0'] < success 1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0'] < success 10 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0'] --- > failed 0.1 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (78.0, 79.0) <zip object at 0x1074daa00> > failed 1 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (78.0, 79.0) <zip object at 0x1074daf80> > failed 10 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) <zip object at 0x1074daa00> 21,50c21,24 < success 0.1 ['--step-length', '1', '--end', '1000'] ['3/1to2/1_0'] < success 1 ['--step-length', '1', '--end', '1000'] ['3/1to2/1_0'] < success 10 ['--step-length', '1', '--end', '1000'] ['3/1to2/1_0'] <truncated after showing first 30 lines>
different outputs from detectors which should detect the same (This bug was triggered by text found in file 'output' matching 'failed') ---------- Differences in output ---------- 0a1,24 > failed 0.1 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (38.4, 38.5) <zip object at 0x10360d640> > failed 1 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (38.0, 39.0) <zip object at 0x103605240> > failed 10 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (30.0, 40.0) <zip object at 0x10363f240> > failed 100 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (0.0, 51.0) <zip object at 0x1036461c0> > failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (38.4, 38.5) <zip object at 0x103649dc0> > failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (38.0, 39.0) <zip object at 0x103662400> > failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (30.0, 40.0) <zip object at 0x103615a80> > failed 100 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (0.0, 100.0) <zip object at 0x103615280> > failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (38.4, 38.5) <zip object at 0x103615980> > failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (38.0, 39.0) <zip object at 0x10368ecc0> > failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (30.0, 40.0) <zip object at 0x10367c180> > failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (0.0, 100.0) <zip object at 0x103644d40> > failed 0.1 ['--step-length', '1', '--end', '51'] 3/1to2/1_0 (39.0, 40.0) <zip object at 0x1036447c0> > failed 1 ['--step-length', '1', '--end', '51'] 3/1to2/1_0 (39.0, 40.0) <zip object at 0x103644100> > failed 10 ['--step-length', '1', '--end', '51'] 3/1to2/1_0 (30.0, 40.0) <zip object at 0x103644a40> > failed 100 ['--step-length', '1', '--end', '51'] 3/1to2/1_0 (0.0, 51.0) <zip object at 0x1036447c0> > failed 0.1 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (39.0, 40.0) <zip object at 0x103644680> > failed 1 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (39.0, 40.0) <zip object at 0x103644a40> > failed 10 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (30.0, 40.0) <zip object at 0x103644d40> > failed 100 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (0.0, 100.0) <zip object at 0x1036445c0> > failed 0.1 ['--step-length', '1', '--end', '1000'] 3/1to2/1_0 (39.0, 40.0) <zip object at 0x103673200> > failed 1 ['--step-length', '1', '--end', '1000'] 3/1to2/1_0 (39.0, 40.0) <zip object at 0x103658900> > failed 10 ['--step-length', '1', '--end', '1000'] 3/1to2/1_0 (30.0, 40.0) <zip object at 0x10368b0c0> > failed 100 ['--step-length', '1', '--end', '1000'] 3/1to2/1_0 (0.0, 100.0) <zip object at 0x10368b0c0>
mapping failure (This bug was triggered by text found in file 'output' matching 'failed') ---------- Differences in output ---------- 0a1 > internal corner (inside, segment2) failed: x=198, x2=198.0, y=1.9, y2=1.9, lane=middle_0, lane2=middle_0, pos=102, pos2=98.0 posLat=2.0 posLat2=1.9
not even failing as intended (This bug was triggered by text found in file 'errors' matching 'Error') ---------- Differences in errors ---------- 0a1,8 > Traceback (most recent call last): > File "/Users/sumo/clangMacOS_M1/sumo/tests/../tests/complex/traci/vehicle/openGap/runner.py", line 156, in <module> > runSingle(targetTimeHeadway, targetSpaceHeadway, duration, changeRate, maxDecel, refVehID) > File "/Users/sumo/clangMacOS_M1/sumo/tests/../tests/complex/traci/vehicle/openGap/runner.py", line 66, in runSingle > leader = results[tc.VAR_LEADER][0] > TypeError: 'NoneType' object is not subscriptable > Error: tcpip::Socket::recvAndCheck @ recv: peer shutdown > Quitting (on error). ---------- Differences in output ---------- 3,102c3,102 < Time 2.0: Gap 'follower'->'leader' = 5.938 (headway=0.367) < 'follower' speed = 16.161582708 < Time 3.0: Gap 'follower'->'leader' = 8.966 (headway=0.528) < 'follower' speed = 16.9836198736 < Time 4.0: Gap 'follower'->'leader' = 11.281 (headway=0.641) < 'follower' speed = 17.5863190784 < Time 5.0: Gap 'follower'->'leader' = 13.069 (headway=0.725) < 'follower' speed = 18.0379935645 < Time 6.0: Gap 'follower'->'leader' = 14.459 (headway=0.787) < 'follower' speed = 18.3815472225 < Time 7.0: Gap 'follower'->'leader' = 15.545 (headway=0.834) < 'follower' speed = 18.6456171431 < Time 8.0: Gap 'follower'->'leader' = 16.397 (headway=0.870) < 'follower' speed = 18.8501483763 < Time 9.0: Gap 'follower'->'leader' = 17.068 (headway=0.898) < 'follower' speed = 19.0094667411 < Time 10.0: Gap 'follower'->'leader' = 17.596 (headway=0.920) < 'follower' speed = 19.1340998278 < Time 11.0: Gap 'follower'->'leader' = 18.013 (headway=0.937) < 'follower' speed = 19.231918606 < Time 12.0: Gap 'follower'->'leader' = 18.342 (headway=0.950) < 'follower' speed = 19.3088858604 < Time 13.0: Gap 'follower'->'leader' = 18.603 (headway=0.960) < 'follower' speed = 19.3695649077 < Time 14.0: Gap 'follower'->'leader' = 18.810 (headway=0.969) < 'follower' speed = 19.4174756866 < Time 15.0: Gap 'follower'->'leader' = 18.973 (headway=0.975) < 'follower' speed = 19.4553500651 < Time 16.0: Gap 'follower'->'leader' = 19.103 (headway=0.980) <truncated after showing first 30 lines>
Test exceeded wallclock time limit of 900.0 seconds ---------- Differences in errors ---------- 3d2 < Could not connect in 61 tries
Test exceeded wallclock time limit of 900.0 seconds ---------- Differences in errors ---------- 1,2c1 < Could not connect in 61 tries < Error: tcpip::Socket::accept() Unable to create listening socket: Address already in use --- > Error: This system has no OpenGL support. Exiting.