10Jul19rv1_2_0+0995-6d913abd19 - detailed test results for COMPLEX

To reconnect the TextTest GUI to these results, run:

texttest -a complex -d /home/delphi/gcc/sumo/tests -reconnect /home/delphi/gcc/texttesttmp/gcc4_64.31Jul000214.26285 -g

To start TextTest for these tests, run:

texttest -a complex -d /home/delphi/gcc/sumo/tests

default: 295 tests: 276 succeeded 14 known bugs 5 FAILED

Detailed information for the tests that FAILED:

TEST FAILED on ts-sim-build-ba : netconvert opendrive_roundtrip ( Last six runs Jul2019 )

---------- Differences in net ----------
2241c2241
<         <lane id="-750.0.00_0" index="0" disallow="pedestrian" speed="22.22" length="52.97" width="3.20" shape="474.46,49.48 479.01,102.25"/>
---
>         <lane id="-750.0.00_0" index="0" disallow="pedestrian" speed="22.22" length="52.97" width="3.20" shape="474.46,49.48 479.01,102.25" type="driving"/>
2244,2245c2244,2245
<         <lane id="-751.0.00_0" index="0" disallow="pedestrian" speed="27.78" length="440.90" width="3.20" shape="33.52,171.51 187.75,151.78 189.33,151.57 191.09,151.35 193.00,151.11 195.03,150.85 197.15,150.58 199.33,150.31 201.55,150.03 203.76,149.76 205.94,149.48 208.06,149.22 210.09,148.97 212.00,148.73 213.76,148.51 215.34,148.32 471.04,116.89"/>
<         <lane id="-751.0.00_1" index="1" disallow="pedestrian" speed="27.78" length="440.90" width="3.20" shape="33.93,174.69 188.16,154.95 189.74,154.75 191.49,154.53 193.40,154.28 195.43,154.03 197.55,153.76 199.73,153.49 201.94,153.21 204.15,152.93 206.33,152.66 208.45,152.39 210.48,152.14 212.39,151.90 214.15,151.69 215.73,151.49 471.43,120.06"/>
---
>         <lane id="-751.0.00_0" index="0" disallow="pedestrian" speed="27.78" length="440.90" width="3.20" shape="33.52,171.51 187.75,151.78 189.33,151.57 191.09,151.35 193.00,151.11 195.03,150.85 197.15,150.58 199.33,150.31 201.55,150.03 203.76,149.76 205.94,149.48 208.06,149.22 210.09,148.97 212.00,148.73 213.76,148.51 215.34,148.32 471.04,116.89" type="driving"/>
>         <lane id="-751.0.00_1" index="1" disallow="pedestrian" speed="27.78" length="440.90" width="3.20" shape="33.93,174.69 188.16,154.95 189.74,154.75 191.49,154.53 193.40,154.28 195.43,154.03 197.55,153.76 199.73,153.49 201.94,153.21 204.15,152.93 206.33,152.66 208.45,152.39 210.48,152.14 212.39,151.90 214.15,151.69 215.73,151.49 471.43,120.06" type="driving"/>
2248,2249c2248,2249
<         <lane id="-752.0.00_0" index="0" disallow="pedestrian" speed="27.78" length="18.27" width="3.20" shape="15.08,174.15 33.17,171.56"/>
<         <lane id="-752.0.00_1" index="1" disallow="pedestrian" speed="27.78" length="18.27" width="3.20" shape="15.53,177.32 33.62,174.73"/>
---
>         <lane id="-752.0.00_0" index="0" disallow="pedestrian" speed="27.78" length="18.27" width="3.20" shape="15.08,174.15 33.17,171.56" type="driving"/>
>         <lane id="-752.0.00_1" index="1" disallow="pedestrian" speed="27.78" length="18.27" width="3.20" shape="15.53,177.32 33.62,174.73" type="driving"/>
2252c2252
<         <lane id="-753.0.00_0" index="0" disallow="pedestrian" speed="22.22" length="0.20" width="3.20" shape="479.75,110.83 479.77,111.03"/>
---
>         <lane id="-753.0.00_0" index="0" disallow="pedestrian" speed="22.22" length="0.20" width="3.20" shape="479.75,110.83 479.77,111.03" type="driving"/>
2255c2255
<         <lane id="-754.0.00_0" index="0" allow="pedestrian" speed="8.33" length="82.72" width="3.20" shape="527.34,533.35 530.05,534.30 551.56,537.91 609.14,545.25"/>
---
>         <lane id="-754.0.00_0" index="0" allow="pedestrian" speed="8.33" length="82.72" width="3.20" shape="527.34,533.35 530.05,534.30 551.56,537.91 609.14,545.25" type="sidewalk"/>
2258c2258
<         <lane id="-755.0.00_0" index="0" allow="pedestrian" speed="8.33" length="21.84" width="3.20" shape="493.59,523.55 514.64,529.35"/>
---
>         <lane id="-755.0.00_0" index="0" allow="pedestrian" speed="8.33" length="21.84" width="3.20" shape="493.59,523.55 514.64,529.35" type="sidewalk"/>
2261c2261
<         <lane id="-756.0.00_0" index="0" allow="pedestrian" speed="8.33" length="78.39" width="3.20" shape="408.10,487.22 420.96,494.14 479.54,519.38"/>
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : traas multiclient ( Last six runs Jul2019 )

---------- Differences in errors ----------
0a1,25
> java.io.IOException: Cannot run program "sumo": error=2, Datei oder Verzeichnis nicht gefunden
> 	at java.base/java.lang.ProcessBuilder.start(ProcessBuilder.java:1128)
> 	at java.base/java.lang.ProcessBuilder.start(ProcessBuilder.java:1071)
> 	at java.base/java.lang.Runtime.exec(Runtime.java:591)
> 	at java.base/java.lang.Runtime.exec(Runtime.java:450)
> 	at it.polito.appeal.traci.SumoTraciConnection.runSUMO(SumoTraciConnection.java:311)
> 	at it.polito.appeal.traci.SumoTraciConnection.runServer(SumoTraciConnection.java:231)
> 	at MultiClient1.main(MultiClient1.java:44)
> Caused by: java.io.IOException: error=2, Datei oder Verzeichnis nicht gefunden
> 	at java.base/java.lang.ProcessImpl.forkAndExec(Native Method)
> 	at java.base/java.lang.ProcessImpl.<init>(ProcessImpl.java:340)
> 	at java.base/java.lang.ProcessImpl.start(ProcessImpl.java:271)
> 	at java.base/java.lang.ProcessBuilder.start(ProcessBuilder.java:1107)
> 	... 6 more
> java.net.SocketException: Socket closed
> 	at java.base/java.net.PlainSocketImpl.socketConnect(Native Method)
> 	at java.base/java.net.AbstractPlainSocketImpl.doConnect(AbstractPlainSocketImpl.java:399)
> 	at java.base/java.net.AbstractPlainSocketImpl.connectToAddress(AbstractPlainSocketImpl.java:242)
> 	at java.base/java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:224)
> 	at java.base/java.net.SocksSocketImpl.connect(SocksSocketImpl.java:403)
> 	at java.base/java.net.Socket.connect(Socket.java:591)
> 	at java.base/java.net.Socket.connect(Socket.java:540)
> 	at it.polito.appeal.traci.SumoTraciConnection.<init>(SumoTraciConnection.java:169)
> 	at it.polito.appeal.traci.SumoTraciConnection.<init>(SumoTraciConnection.java:155)
> 	at MultiClient2.main(MultiClient2.java:33)
---------- Differences in output ----------
1,8325d0
< Step 0.1, tlsPhase 0 (North-South)
< Step 0.1
< Step 0.2, tlsPhase 0 (North-South)
< Step 0.2
< Step 0.3, tlsPhase 0 (North-South)
< Step 0.3
< Step 0.4, tlsPhase 0 (North-South)
< Step 0.4
< Step 0.5, tlsPhase 0 (North-South)
< Step 0.5
< Step 0.6, tlsPhase 0 (North-South)
< Step 0.6
< Step 0.7, tlsPhase 0 (North-South)
< Step 0.7
< Step 0.8, tlsPhase 0 (North-South)
< Step 0.8
< Step 0.9, tlsPhase 0 (North-South)
< Step 0.9
< Step 1.0, tlsPhase 0 (North-South)
< Step 1.0
< Step 1.1, tlsPhase 0 (North-South)
< Step 1.1
< Step 1.2, tlsPhase 0 (North-South)
< Step 1.2
< Step 1.3, tlsPhase 0 (North-South)
< Step 1.3
< Step 1.4, tlsPhase 0 (North-South)
< Step 1.4
< Step 1.5, tlsPhase 0 (North-South)
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : traas simple ( Last six runs Jul2019 )

---------- Differences in errors ----------
0a1,15
> java.io.IOException: Cannot run program "sumo": error=2, Datei oder Verzeichnis nicht gefunden
> 	at java.base/java.lang.ProcessBuilder.start(ProcessBuilder.java:1128)
> 	at java.base/java.lang.ProcessBuilder.start(ProcessBuilder.java:1071)
> 	at java.base/java.lang.Runtime.exec(Runtime.java:591)
> 	at java.base/java.lang.Runtime.exec(Runtime.java:450)
> 	at it.polito.appeal.traci.SumoTraciConnection.runSUMO(SumoTraciConnection.java:311)
> 	at it.polito.appeal.traci.SumoTraciConnection.runServer(SumoTraciConnection.java:231)
> 	at it.polito.appeal.traci.SumoTraciConnection.runServer(SumoTraciConnection.java:210)
> 	at Main.main(Main.java:42)
> Caused by: java.io.IOException: error=2, Datei oder Verzeichnis nicht gefunden
> 	at java.base/java.lang.ProcessImpl.forkAndExec(Native Method)
> 	at java.base/java.lang.ProcessImpl.<init>(ProcessImpl.java:340)
> 	at java.base/java.lang.ProcessImpl.start(ProcessImpl.java:271)
> 	at java.base/java.lang.ProcessBuilder.start(ProcessBuilder.java:1107)
> 	... 7 more
---------- Differences in output ----------
1,4726d0
< Step 0.1, tlsPhase 0 (North-South)
< Step 0.2, tlsPhase 0 (North-South)
< Step 0.3, tlsPhase 0 (North-South)
< Step 0.4, tlsPhase 0 (North-South)
< Step 0.5, tlsPhase 0 (North-South)
< Step 0.6, tlsPhase 0 (North-South)
< Step 0.7, tlsPhase 0 (North-South)
< Step 0.8, tlsPhase 0 (North-South)
< Step 0.9, tlsPhase 0 (North-South)
< Step 1.0, tlsPhase 0 (North-South)
< Step 1.1, tlsPhase 0 (North-South)
< Step 1.2, tlsPhase 0 (North-South)
< Step 1.3, tlsPhase 0 (North-South)
< Step 1.4, tlsPhase 0 (North-South)
< Step 1.5, tlsPhase 0 (North-South)
< Step 1.6, tlsPhase 0 (North-South)
< Step 1.7, tlsPhase 0 (North-South)
< Step 1.8, tlsPhase 0 (North-South)
< Step 1.9, tlsPhase 0 (North-South)
< Step 2.0, tlsPhase 0 (North-South)
< Step 2.1, tlsPhase 0 (North-South)
< Step 2.2, tlsPhase 0 (North-South)
< Step 2.3, tlsPhase 0 (North-South)
< Step 2.4, tlsPhase 0 (North-South)
< Step 2.5, tlsPhase 0 (North-South)
< Step 2.6, tlsPhase 0 (North-South)
< Step 2.7, tlsPhase 0 (North-South)
< Step 2.8, tlsPhase 0 (North-South)
< Step 2.9, tlsPhase 0 (North-South)
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : traas subscription ( Last six runs Jul2019 )

---------- Differences in errors ----------
2a3,17
> java.io.IOException: Cannot run program "sumo": error=2, Datei oder Verzeichnis nicht gefunden
> 	at java.base/java.lang.ProcessBuilder.start(ProcessBuilder.java:1128)
> 	at java.base/java.lang.ProcessBuilder.start(ProcessBuilder.java:1071)
> 	at java.base/java.lang.Runtime.exec(Runtime.java:591)
> 	at java.base/java.lang.Runtime.exec(Runtime.java:450)
> 	at it.polito.appeal.traci.SumoTraciConnection.runSUMO(SumoTraciConnection.java:311)
> 	at it.polito.appeal.traci.SumoTraciConnection.runServer(SumoTraciConnection.java:231)
> 	at it.polito.appeal.traci.SumoTraciConnection.runServer(SumoTraciConnection.java:210)
> 	at Subscription.main(Subscription.java:55)
> Caused by: java.io.IOException: error=2, Datei oder Verzeichnis nicht gefunden
> 	at java.base/java.lang.ProcessImpl.forkAndExec(Native Method)
> 	at java.base/java.lang.ProcessImpl.<init>(ProcessImpl.java:340)
> 	at java.base/java.lang.ProcessImpl.start(ProcessImpl.java:271)
> 	at java.base/java.lang.ProcessBuilder.start(ProcessBuilder.java:1107)
> 	... 7 more
---------- Differences in output ----------
1,90d0
< Step: 0
< Subscription Departed vehicles: v0
< Step: 1
< Subscription Departed vehicles: v1
< Position of vehicle v0: x = 15.505515474636486 y = -4.8
< Speed of vehicle v0: 15.505515474636484
< Step: 2
< Subscription Departed vehicles: v2
< Position of vehicle v0: x = 31.01103094927297 y = -4.8
< Speed of vehicle v0: 15.505515474636484
< Position of vehicle v1: x = 14.406418569563781 y = -4.8
< Speed of vehicle v1: 14.406418569563781
< Step: 3
< Subscription Departed vehicles: v3
< Position of vehicle v0: x = 46.51654642390945 y = -4.8
< Speed of vehicle v0: 15.505515474636484
< Position of vehicle v1: x = 28.9684232699475 y = -4.8
< Speed of vehicle v1: 14.562004700383719
< Position of vehicle v2: x = 13.206218569563783 y = -4.8
< Speed of vehicle v2: 13.206218569563783
< Step: 4
< Subscription Departed vehicles: v4
< Position of vehicle v0: x = 62.02206189854594 y = -4.8
< Speed of vehicle v0: 15.505515474636484
< Position of vehicle v1: x = 43.53042797033122 y = -4.8
< Speed of vehicle v1: 14.562004700383719
< Position of vehicle v2: x = 26.808063269947503 y = -4.8
< Speed of vehicle v2: 13.601844700383719
< Position of vehicle v3: x = 12.006018569563782 y = -4.8
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : tutorial city_mobil ( Last six runs Jul2019 )

---------- Differences in output ----------
4c4
< waiting time (max, mean, dev): True True True
---
> waiting time (max, mean, dev): False True False
18c18
< ('footmainout', 'footmain5to6') True True True
---
> ('footmainout', 'footmain5to6') True True False
20c20
< ('footmainout', 'footmain7to8') True True True
---
> ('footmainout', 'footmain7to8') True True False
22c22
< waiting time (max, mean, dev): True True True
---
> waiting time (max, mean, dev): False True False
36c36
< ('footmainout', 'footmain5to6') True True True
---
> ('footmainout', 'footmain5to6') True True False
38c38
< ('footmainout', 'footmain7to8') True True True
---
> ('footmainout', 'footmain7to8') True True False

Detailed information for the tests that had known bugs:

TEST had known bugs (bug 1691 (NONEXISTENT)) on ts-sim-build-ba : netconvert dlr-navteq_roundtrip ( Last six runs Jul2019 )

Failed to open URL 'https://sumo.dlr.de/trac.wsgi/ticket/1691?format=tab': HTTP Error 404: Not Found.

Please make sure that bug 1691 exists
and that the configuration entry 'bug_system_location' points to the correct trac instance.
The current value is 'https://sumo.dlr.de/trac.wsgi/'.
(This bug was triggered by text found in file 'net' matching '.*')
---------- Differences in net ----------
4c4
< <net version="1.1" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">
---
> <net version="1.3" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">
2768c2768
<     <connection from="-26816553" to="26816541" fromLane="0" toLane="0" via=":294168098_5_0" dir="L" state="="/>
---
>     <connection from="-26816553" to="26816541" fromLane="0" toLane="0" via=":294168098_5_0" dir="l" state="="/>
2975c2975
<     <connection from="27445116" to="27445117" fromLane="0" toLane="0" via=":294169338_0_0" dir="s" state="="/>
---
>     <connection from="27445116" to="27445117" fromLane="0" toLane="0" via=":294169338_0_0" dir="R" state="="/>
3216c3216
<     <connection from=":294168098_5" to="26816541" fromLane="0" toLane="0" dir="L" state="M"/>
---
>     <connection from=":294168098_5" to="26816541" fromLane="0" toLane="0" dir="l" state="M"/>
3241c3241
<     <connection from=":294169338_0" to="27445117" fromLane="0" toLane="0" dir="s" state="M"/>
---
>     <connection from=":294169338_0" to="27445117" fromLane="0" toLane="0" dir="R" state="M"/>

TEST had known bugs (bug 1691 (NONEXISTENT)) on ts-sim-build-ba : netconvert matsim_roundtrip ( Last six runs Jul2019 )

Failed to open URL 'https://sumo.dlr.de/trac.wsgi/ticket/1691?format=tab': HTTP Error 404: Not Found.

Please make sure that bug 1691 exists
and that the configuration entry 'bug_system_location' points to the correct trac instance.
The current value is 'https://sumo.dlr.de/trac.wsgi/'.
(This bug was triggered by text found in file 'net' matching '.*')
---------- Differences in net ----------
4c4
< <net version="1.1" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">
---
> <net version="1.3" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">
880c880
<         <lane id=":294830184_7_0" index="0" speed="5.56" length="14.38" shape="915.07,462.77 918.06,460.17 921.14,459.20 924.29,459.87 927.52,462.17"/>
---
>         <lane id=":294830184_7_0" index="0" speed="5.56" length="13.52" shape="915.07,462.77 917.74,460.95 921.19,460.22 924.69,460.61 927.52,462.17"/>
3708c3708
<     <connection from="-26004787#2" to="26004966#2" fromLane="0" toLane="0" via=":283722837_12_0" dir="s" state="="/>
---
>     <connection from="-26004787#2" to="26004966#2" fromLane="0" toLane="0" via=":283722837_12_0" dir="R" state="="/>
3724c3724
<     <connection from="-26004868#0" to="-5198585#7" fromLane="0" toLane="0" via=":283719736_13_0" dir="R" state="m"/>
---
>     <connection from="-26004868#0" to="-5198585#7" fromLane="0" toLane="0" via=":283719736_13_0" dir="r" state="m"/>
3747c3747
<     <connection from="-26816553" to="-26816413#1" fromLane="0" toLane="0" via=":294168098_4_0" dir="R" state="="/>
---
>     <connection from="-26816553" to="-26816413#1" fromLane="0" toLane="0" via=":294168098_4_0" dir="r" state="="/>
4015c4015
<     <connection from="26816413#1" to="26816553" fromLane="0" toLane="0" via=":294168098_1_0" dir="L" state="="/>
---
>     <connection from="26816413#1" to="26816553" fromLane="0" toLane="0" via=":294168098_1_0" dir="l" state="="/>
4023c4023
<     <connection from="26816590#0" to="26816590#1" fromLane="0" toLane="0" via=":294169338_0_0" dir="s" state="="/>
---
>     <connection from="26816590#0" to="26816590#1" fromLane="0" toLane="0" via=":294169338_0_0" dir="R" state="="/>
4037c4037
<     <connection from="26843038#0" to="26843038#1" fromLane="0" toLane="0" via=":294830184_7_0" dir="L" state="="/>
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output one_vehicle ( Last six runs Jul2019 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
10c10
< success 0.1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (71.3, 71.4) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
12c12
< success 1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (72.0, 73.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
14c14
< success 10 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
18c18
< success 0.1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (71.3, 71.4) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
20c20
< success 1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (72.0, 73.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
22c22
< success 10 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
24c24
< success 100 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (100.0, 200.0) [('e1', -1.0), ('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
34c34
< success 0.1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output teleport ( Last six runs Jul2019 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
2c2
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
---
> success 0.1 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
4c4
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
---
> success 0.1 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
6c6
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
---
> success 1 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
8c8
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
---
> success 1 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
10c10
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
---
> success 10 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
12c12
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
---
> success 10 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
14c14
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
---
> success 100 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
16c16
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output teleport_multihop ( Last six runs Jul2019 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
34c34
< success 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (230.0, 230.1) [('e2', 9.99), ('e3', 10.0), ('edge', 9.99), ('lane', 9.99)]
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (149.0, 149.1) [('e2', 9.99), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
36c36
< success 0.1 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (148.1, 148.2) [('e2', 9.99), ('e3', 10.0), ('edge', 9.99), ('lane', 9.99)]
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (149.0, 149.1) [('e2', 9.99), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
38c38
< success 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (230.0, 231.0) [('e2', 9.99), ('e3', 10.0), ('edge', 9.99), ('lane', 9.99)]
---
> failed 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (149.0, 150.0) [('e2', 9.93), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
40c40
< success 1 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (148.0, 149.0) [('e2', 9.91), ('e3', 10.0), ('edge', 9.91), ('lane', 9.91)]
---
> failed 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (149.0, 150.0) [('e2', 9.93), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
42c42
< success 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (230.0, 240.0) [('e2', 9.42), ('e3', 9.9), ('edge', 9.42), ('lane', 9.42)]
---
> failed 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (140.0, 150.0) [('e2', 9.99), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
44c44
< success 10 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (140.0, 150.0) [('e2', 9.96), ('e3', 9.99), ('edge', 9.96), ('lane', 9.96)]
---
> failed 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (140.0, 150.0) [('e2', 9.99), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
46c46
< success 100 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (200.0, 300.0) [('e1', 10.0), ('e2', 9.22), ('e3', 5.71), ('edge', 9.22), ('lane', 9.22)]
---
> failed 100 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (100.0, 200.0) [('e1', 10.0), ('e2', 7.95), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
48c48
< success 100 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (100.0, 200.0) [('e1', 9.53), ('e2', 5.82), ('e3', 6.93), ('edge', 5.82), ('lane', 5.82)]
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output teleport_multihop_newDefaults ( Last six runs Jul2019 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
18c18
< success 0.1 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.2, 76.3) [('e2', 10.49), ('e3', 10.35), ('edge', 10.49), ('lane', 10.49)]
20c20
< success 0.1 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.2, 76.3) [('e2', 10.49), ('e3', 10.35), ('edge', 10.49), ('lane', 10.49)]
22c22
< success 1 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.0, 77.0) [('e2', 10.39), ('e3', 10.35), ('edge', 10.39), ('lane', 10.39)]
24c24
< success 1 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.0, 77.0) [('e2', 10.39), ('e3', 10.35), ('edge', 10.39), ('lane', 10.39)]
26c26
< success 10 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.0, 80.0) [('e2', 10.42), ('e3', 10.25), ('edge', 10.42), ('lane', 10.42)]
28c28
< success 10 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.0, 80.0) [('e2', 10.42), ('e3', 10.25), ('edge', 10.42), ('lane', 10.42)]
30c30
< success 100 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0']
---
> failed 100 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (0.0, 100.0) [('e1', 10.27), ('e2', 10.24), ('e3', 9.59), ('edge', 10.24), ('lane', 10.24)]
32c32
< success 100 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output two_same_vehicles ( Last six runs Jul2019 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
10c10
< success 0.1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (75.4, 75.5) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
12c12
< success 1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (76.0, 77.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
14c14
< success 10 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
18c18
< success 0.1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (75.4, 75.5) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
20c20
< success 1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (76.0, 77.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
22c22
< success 10 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
24c24
< success 100 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (100.0, 200.0) [('e1', -1.0), ('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
34c34
< success 0.1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output two_vehicles_diff_length ( Last six runs Jul2019 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
10c10
< success 0.1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (76.4, 76.5) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
12c12
< success 1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (77.0, 78.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
14c14
< success 10 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
18c18
< success 0.1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (76.4, 76.5) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
20c20
< success 1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (77.0, 78.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
22c22
< success 10 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
24c24
< success 100 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (100.0, 200.0) [('e1', -1.0), ('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
34c34
< success 0.1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output two_vehicles_diff_speed ( Last six runs Jul2019 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
0a1,48
> Loading configuration... done.
> failed 0.1 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (38.4, 38.5) [('e2', 9.6), ('e3', 9.5), ('edge', 9.6), ('lane', 9.6)]
> Loading configuration... done.
> failed 1 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (38.0, 39.0) [('e2', 9.64), ('e3', 9.5), ('edge', 9.64), ('lane', 9.64)]
> Loading configuration... done.
> failed 10 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (30.0, 40.0) [('e2', 9.86), ('e3', 9.5), ('edge', 9.86), ('lane', 9.86)]
> Loading configuration... done.
> failed 100 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (0.0, 51.0) [('e2', 9.62), ('e3', 9.5), ('edge', 9.62), ('lane', 9.62)]
> Loading configuration... done.
> failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (38.4, 38.5) [('e2', 9.6), ('e3', 9.5), ('edge', 9.6), ('lane', 9.6)]
> Loading configuration... done.
> failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (38.0, 39.0) [('e2', 9.64), ('e3', 9.5), ('edge', 9.64), ('lane', 9.64)]
> Loading configuration... done.
> failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (30.0, 40.0) [('e2', 9.86), ('e3', 9.5), ('edge', 9.86), ('lane', 9.86)]
> Loading configuration... done.
> failed 100 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (0.0, 100.0) [('e1', 9.5), ('e2', 9.53), ('e3', 9.5), ('edge', 9.47), ('lane', 9.47)]
> Loading configuration... done.
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (38.4, 38.5) [('e2', 9.6), ('e3', 9.5), ('edge', 9.6), ('lane', 9.6)]
> Loading configuration... done.
> failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (38.0, 39.0) [('e2', 9.64), ('e3', 9.5), ('edge', 9.64), ('lane', 9.64)]
> Loading configuration... done.
> failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (30.0, 40.0) [('e2', 9.86), ('e3', 9.5), ('edge', 9.86), ('lane', 9.86)]
> Loading configuration... done.
> failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (0.0, 100.0) [('e1', 9.5), ('e2', 9.53), ('e3', 9.5), ('edge', 9.47), ('lane', 9.47)]
> Loading configuration... done.
> failed 0.1 ['--step-length', '1', '--end', '51'] 3/1to2/1_0 (39.0, 40.0) [('e2', 9.6), ('e3', 9.5), ('edge', 9.6), ('lane', 9.6)]
> Loading configuration... done.
> failed 1 ['--step-length', '1', '--end', '51'] 3/1to2/1_0 (39.0, 40.0) [('e2', 9.6), ('e3', 9.5), ('edge', 9.6), ('lane', 9.6)]
> Loading configuration... done.
<truncated after showing first 30 lines>

TEST had known bugs (#4727) on ts-sim-build-ba : traci ContextSubscriptionFilters leadFollow laneChangeLeft ( Last six runs Jul2019 )

#4727
(This bug was triggered by text found in file 'output' matching '.')
---------- Differences in output ----------
105d104
< lead_straight
106a106
> lead_straight

TEST had known bugs (#4727) on ts-sim-build-ba : traci ContextSubscriptionFilters leadFollow laneChangeNeighbors ( Last six runs Jul2019 )

#4727
(This bug was triggered by text found in file 'output' matching '.')
---------- Differences in output ----------
164a165
> follow_straight
167c168
< lead_left
---
> lead_right
169c170
< follow_straight
---
> lead_left

TEST had known bugs (#4727) on ts-sim-build-ba : traci ContextSubscriptionFilters leadFollow laneChangeRight ( Last six runs Jul2019 )

#4727
(This bug was triggered by text found in file 'output' matching '.')
---------- Differences in output ----------
105d104
< lead_straight
106a106
> lead_straight
119a120
> lead_right

TEST had known bugs (see #3263) on ts-sim-build-ba : traci pythonApi moveToXY keepRoute2 ( Last six runs Jul2019 )

mapping failure
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
0a1
> internal corner (inside, segment2) failed: x=198, x2=198.0,   y=1.9, y2=1.9,   lane=middle_0, lane2=middle_0, pos=102, pos2=98.0   posLat=2.0 posLat2=1.9

TEST had known bugs (see #5383) on ts-sim-build-ba : traci pythonApi moveToXY permissions ( Last six runs Jul2019 )

mapping failure
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
0a1
> shifted to left lane (permissions) failed: mode=2 x=40, x2=40.0,   y=-1.5, y2=-1.5,   lane=beg_1, lane2=, pos=40, pos2=-1073741824.0   posLat=0.0 posLat2=-1073741824.0