27Aug22rv1_14_1+0589-1c6c70ded18 - detailed test results for COMPLEX

To reconnect the TextTest GUI to these results, run:

texttest -a complex -d /home/delphi/gcc/sumo/tests -reconnect /home/delphi/gcc/texttesttmp/gcc4_64.01Sep001734.945491 -g

To start TextTest for these tests, run:

texttest -a complex -d /home/delphi/gcc/sumo/tests


default: 669 tests: 654 succeeded 10 known bugs 5 FAILED

Detailed information for the tests that FAILED:

TEST FAILED on ts-sim-build-ba : state save_on_rail_signal ( Last six runs Sep2022 Aug2022 )

---------- Differences in output ----------
11,12c11,12
< Simulation ended at time: 191.00
< Simulation ended at time: 191.00
---
> Simulation ended at time: 202.00
> Simulation ended at time: 202.00
---------- Differences in state ----------
5d4
<     <route id="!train" state="0" edges="a b e"/>
8c7
<     <delay number="3" begin="3" end="0" depart="0.00" time="0.00"/>
---
>     <delay number="2" begin="3" end="1" depart="31.00" time="31.00"/>
10,12c9,10
<     <vehicle id="train" type="train" depart="0.00" departSpeed="max" route="!train" distance="0 0" speedFactor="1.0000" state="18 0 0 20.10 104000 109.71 115000 0 0" pos="93.64 73.64 0.00" speed="0.00 0.00" angle="90.00" posLat="0.00" waitingTime="100000 1 0 104000"/>
<     <vehicle id="train2" type="train" depart="0.00" departSpeed="max" route="!train2" distance="136.06 0" speedFactor="1.0000" state="18 0 0 20.10 0 6.51 115000 0 1" pos="2.00 118.06 2.00" speed="2.00 0.00" angle="225.22" posLat="0.00" waitingTime="100000 0">
<         <stop lane="-e_0" duration="100.00" started="15.00" ended="115.00"/>
---
>     <vehicle id="train2" type="train" depart="0.00" departSpeed="max" route="!train2" distance="0 0" speedFactor="1.0000" state="18 31000 0 20.10 0 5.65 115000 1 0" pos="136.06 116.06 0.00" speed="0.00 0.00" angle="225.00" posLat="0.00" waitingTime="100000 0">
>         <stop lane="-e_0" startPos="135.86" endPos="136.06" duration="31.00" started="46.00"/>
17c15
<             <approaching id="train2" arrivalTime="152304" arrivalSpeed="5.72" departSpeed="5.72" request="1" arrivalSpeedBraking="0.00" waitingTime="0" distance="210.05"/>
---
>             <approaching id="train2" arrivalTime="183304" arrivalSpeed="5.72" departSpeed="5.72" request="1" arrivalSpeedBraking="0.00" waitingTime="0" distance="210.05"/>
21d18
<         <vehicles value="train2"/>
23c20
<             <approaching id="train2" arrivalTime="116862" arrivalSpeed="5.72" departSpeed="5.72" request="1" arrivalSpeedBraking="0.00" waitingTime="0" distance="7.19"/>
---
>             <approaching id="train2" arrivalTime="147862" arrivalSpeed="5.72" departSpeed="5.72" request="1" arrivalSpeedBraking="0.00" waitingTime="0" distance="7.19"/>
29c26
<             <approaching id="train2" arrivalTime="132149" arrivalSpeed="13.89" departSpeed="13.89" request="1" arrivalSpeedBraking="0.00" waitingTime="0" distance="202.86"/>
---
>             <approaching id="train2" arrivalTime="163149" arrivalSpeed="13.89" departSpeed="13.89" request="1" arrivalSpeedBraking="0.00" waitingTime="0" distance="202.86"/>
34c31
<         <vehicles value="train3"/>
---
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : state save_rail_signal ( Last six runs Sep2022 Aug2022 )

---------- Differences in output ----------
11,12c11,12
< Simulation ended at time: 163.00
< Simulation ended at time: 163.00
---
> Simulation ended at time: 174.00
> Simulation ended at time: 174.00
---------- Differences in state ----------
7c7
<     <delay number="2" begin="2" end="0" depart="0.00" time="0.00"/>
---
>     <delay number="1" begin="2" end="0" depart="0.00" time="0.00"/>
9,11c9,11
<     <vehicle id="train" type="train" depart="0.00" departSpeed="max" route="!train" distance="0 0" speedFactor="1.0000" state="18 0 0 20.10 18000 23.71 29000 0 0" pos="93.64 73.64 0.00" speed="0.00 0.00" angle="90.00" posLat="0.00" waitingTime="100000 1 0 18000"/>
<     <vehicle id="train2" type="train" depart="0.00" departSpeed="max" route="!train2" distance="0 0" speedFactor="1.0000" state="18 0 0 20.10 0 5.65 29000 1 0" pos="136.06 116.06 0.00" speed="0.00 0.00" angle="225.00" posLat="0.00" waitingTime="100000 0">
<         <stop lane="-e_0" startPos="135.86" endPos="136.06" duration="86.00" started="15.00"/>
---
>     <vehicle id="train" type="train" depart="0.00" departSpeed="max" route="!train" distance="305.03 0" speedFactor="1.0000" state="18 0 2 20.10 0 0.00 29000 0 0" pos="117.88 97.88 13.89" speed="13.89 13.89" angle="45.00" posLat="0.00" waitingTime="100000 0"/>
>     <vehicle id="train2" type="train" depart="0.00" departSpeed="max" route="!train2" distance="0 0" speedFactor="1.0000" state="18 9223372036854775807 0 -1.00 0 0.00 0 0 0" pos="20.10 0.10 0.00" speed="0.00 0.00" angle="90.00" posLat="0.00" waitingTime="100000 0">
>         <stop lane="-e_0" startPos="135.86" endPos="136.06" duration="100.00"/>
13,34c13
<     <lane id=":A_0_0">
<         <link to="-d_0">
<             <approaching id="train2" arrivalTime="152304" arrivalSpeed="5.72" departSpeed="5.72" request="1" arrivalSpeedBraking="0.00" waitingTime="0" distance="210.05"/>
<         </link>
<     </lane>
<     <lane id=":B_0_0">
<         <link to="-b_0">
<             <approaching id="train2" arrivalTime="116862" arrivalSpeed="5.72" departSpeed="5.72" request="1" arrivalSpeedBraking="0.00" waitingTime="0" distance="7.19"/>
<         </link>
<     </lane>
<     <lane id="-b_0">
<         <link to=":A_0_0">
<             <approaching id="train2" arrivalTime="132149" arrivalSpeed="13.89" departSpeed="13.89" request="1" arrivalSpeedBraking="0.00" waitingTime="0" distance="202.86"/>
<         </link>
<     </lane>
<     <lane id="-e_0">
<         <vehicles value="train2"/>
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : sumo protobuf ( Last six runs Sep2022 Aug2022 )

---------- Differences in errors ----------
0a1,58
> Traceback (most recent call last):
>   File "/home/delphi/gcc/sumo/tools/xml/protobuf2xml.py", line 130, in <module>
>     main()
>   File "/home/delphi/gcc/sumo/tools/xml/protobuf2xml.py", line 124, in main
>     module = xml2protobuf.generateProto(attrFinder.tagAttrs, attrFinder.depthTags,
>   File "/home/delphi/gcc/sumo/tools/xml/xml2protobuf.py", line 187, in generateProto
>     return importlib.import_module("%s_pb2" % base)
>   File "/usr/lib/python3.8/importlib/__init__.py", line 127, in import_module
>     return _bootstrap._gcd_import(name[level:], package, level)
>   File "<frozen importlib._bootstrap>", line 1014, in _gcd_import
>   File "<frozen importlib._bootstrap>", line 991, in _find_and_load
>   File "<frozen importlib._bootstrap>", line 975, in _find_and_load_unlocked
>   File "<frozen importlib._bootstrap>", line 671, in _load_unlocked
>   File "<frozen importlib._bootstrap_external>", line 848, in exec_module
>   File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
>   File "/home/delphi/gcc/texttesttmp/gcc4_64.27Aug001656.1683361/complex/sumo/protobuf/trajectories_pb2.py", line 32, in <module>
>     _descriptor.EnumValueDescriptor(
>   File "/home/delphi/.local/lib/python3.8/site-packages/google/protobuf/descriptor.py", line 755, in __new__
>     _message.Message._CheckCalledFromGeneratedFile()
> TypeError: Descriptors cannot not be created directly.
> If this call came from a _pb2.py file, your generated code is out of date and must be regenerated with protoc >= 3.19.0.
> If you cannot immediately regenerate your protos, some other possible workarounds are:
>  1. Downgrade the protobuf package to 3.20.x or lower.
>  2. Set PROTOCOL_BUFFERS_PYTHON_IMPLEMENTATION=python (but this will use pure-Python parsing and will be much slower).
> 
> More information: https://developers.google.com/protocol-buffers/docs/news/2022-05-06#python-updates
> Traceback (most recent call last):
>   File "/home/delphi/gcc/sumo/tools/xml/xml2protobuf.py", line 210, in <module>
>     main()
<truncated after showing first 30 lines>
---------- Differences in output ----------
1,5d0
< --- 
< +++ 
< -
< -<trajectories xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/amitran/trajectories.xsd" timeStepSize="1000">
< +<trajectories timeStepSize="1000">

TEST FAILED on ts-sim-build-ba : tutorial city_mobil taxi_cyber ( Last six runs Sep2022 Aug2022 )

---------- Differences in errors ----------
1,2c1
< Warning: Person 'v-7.5p0' is jammed on edge 'cyber6to7', time=644.00.
< Warning: Person 'v7.6p2' is jammed on edge 'cyber6to7', time=648.00.
---
> Warning: Person 'v-7.6p0' is jammed on edge 'cyber6to7', time=681.00.

TEST FAILED on ts-sim-build-ba : tutorial gtfs plain ( Last six runs Sep2022 Aug2022 )

---------- Differences in gtfs_additional ----------
297,298d296
<     <busStop id="-151627020#0:27.00" lane="-151627020#0_0" startPos="14.00" endPos="40.00" friendlyPos="true" name="S Grünau (Berlin) [Richterstr.]">
<     </busStop>
363c361
<     <busStop id="388188274#0:52.65" lane="388188274#0_0" startPos="39.65" endPos="65.65" friendlyPos="true" name="Müggelheim/Dorf (Berlin)">
---
>     <busStop id="26427739#2:15.17" lane="26427739#2_0" startPos="2.17" endPos="28.17" friendlyPos="true" name="Ludwigshöheweg (Berlin)">
371,372d368
<     <busStop id="26427739#2:15.17" lane="26427739#2_0" startPos="2.17" endPos="28.17" friendlyPos="true" name="Ludwigshöheweg (Berlin)">
<     </busStop>
815,823c811,812
<     <route id="62_257252" edges="171419641 319292807">
<         <stop busStop="171419641:225.64" duration="10" until="0"/>
<         <stop busStop="319292807:97.87" duration="10" until="60"/>
<         <stop busStop="319292807:460.19" duration="10" until="120"/>
<         <stop busStop="319292807:844.67" duration="10" until="180"/>
<         <stop busStop="319292807:1137.13" duration="10" until="240"/>
<         <stop busStop="319292807:1477.14" duration="10" until="300"/>
<         <stop busStop="319292807:1926.71" duration="10" until="360"/>
<         <stop busStop="319292807:2090.24" duration="10" until="420"/>
---
>     <route id="S45_92570" edges="31094941">
>         <stop busStop="31094941:102.98" duration="10" until="0"/>
825,833c814,815
<     <route id="62_257260" edges="171419641 319292807">
<         <stop busStop="171419641:225.64" duration="10" until="0"/>
<         <stop busStop="319292807:97.87" duration="10" until="60"/>
<         <stop busStop="319292807:460.19" duration="10" until="120"/>
<         <stop busStop="319292807:844.67" duration="10" until="180"/>
<         <stop busStop="319292807:1137.13" duration="10" until="240"/>
<truncated after showing first 30 lines>
---------- Differences in gtfs_routes ----------
5,178d4
<     <vehicle id="S46_92988.0" route="92988" type="train" depart="14630" line="S46_92988"/>
<     <vehicle id="S46_92990.0" route="92988" type="train" depart="15830" line="S46_92988"/>
<     <vehicle id="S46_92929.0" route="92929" type="train" depart="17030" line="S46_92929"/>
<     <vehicle id="S46_92930.0" route="92929" type="train" depart="18230" line="S46_92929"/>
<     <vehicle id="S46_92931.0" route="92929" type="train" depart="19430" line="S46_92929"/>
<     <vehicle id="S46_92932.0" route="92929" type="train" depart="20630" line="S46_92929"/>
<     <vehicle id="S46_92933.0" route="92929" type="train" depart="21830" line="S46_92929"/>
<     <vehicle id="S46_92934.0" route="92929" type="train" depart="23030" line="S46_92929"/>
<     <vehicle id="S46_92935.0" route="92929" type="train" depart="24230" line="S46_92929"/>
<     <vehicle id="S46_92936.0" route="92929" type="train" depart="25430" line="S46_92929"/>
<     <vehicle id="S46_92937.0" route="92929" type="train" depart="26630" line="S46_92929"/>
<     <vehicle id="S46_92938.0" route="92929" type="train" depart="27830" line="S46_92929"/>
<     <vehicle id="S46_92939.0" route="92929" type="train" depart="29030" line="S46_92929"/>
<     <vehicle id="S46_92940.0" route="92929" type="train" depart="30230" line="S46_92929"/>
<     <vehicle id="S46_92941.0" route="92929" type="train" depart="31430" line="S46_92929"/>
<     <vehicle id="S46_92942.0" route="92929" type="train" depart="32630" line="S46_92929"/>
<     <vehicle id="S46_92943.0" route="92929" type="train" depart="33830" line="S46_92929"/>
<     <vehicle id="S46_92944.0" route="92929" type="train" depart="35030" line="S46_92929"/>
<     <vehicle id="S46_92945.0" route="92929" type="train" depart="36230" line="S46_92929"/>
<     <vehicle id="S46_92946.0" route="92929" type="train" depart="37430" line="S46_92929"/>
<     <vehicle id="S46_92947.0" route="92929" type="train" depart="38630" line="S46_92929"/>
<     <vehicle id="S46_92948.0" route="92929" type="train" depart="39830" line="S46_92929"/>
<     <vehicle id="S46_92949.0" route="92929" type="train" depart="41030" line="S46_92929"/>
<     <vehicle id="S46_92950.0" route="92929" type="train" depart="42230" line="S46_92929"/>
<     <vehicle id="S46_92951.0" route="92929" type="train" depart="43430" line="S46_92929"/>
<     <vehicle id="S46_92952.0" route="92929" type="train" depart="44630" line="S46_92929"/>
<     <vehicle id="S46_92953.0" route="92929" type="train" depart="45830" line="S46_92929"/>
<     <vehicle id="S46_92954.0" route="92929" type="train" depart="47030" line="S46_92929"/>
<     <vehicle id="S46_92955.0" route="92929" type="train" depart="77030" line="S46_92929"/>
<truncated after showing first 30 lines>
---------- Differences in output ----------
19,21d18
< Warning! Fixed connection 263_187986 17
< Warning! Fixed connection 263_188146 17
< Warning! Fixed connection 263_34416 17
27c24,26
< Warning! Fixed connection N68_236778 30
---
> Warning! Fixed connection X69_246782 22
> Warning! Fixed connection X69_247080 22
> Warning! Fixed connection X69_247100 22

Detailed information for the tests that had known bugs:

TEST had known bugs (see #8973) on ts-sim-build-ba : sumo ToCDevice dynamic_ToC_stop ( Last six runs Sep2022 Aug2022 )

dynamic ToC triggered despite stop present on vehicle's lane continuation
(This bug was triggered by text found in file 'tocs' matching 'DYNTOR')

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output one_vehicle ( Last six runs Sep2022 Aug2022 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
5,7c5,7
< success 0.1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
< success 1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
< success 10 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (71.4, 71.5) <zip object at 0x7fa581fb8400>
> failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (72.0, 73.0) <zip object at 0x7fa582055fc0>
> failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) <zip object at 0x7fa582010880>
9,12c9,12
< success 0.1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
< success 1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
< success 10 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
< success 100 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (71.4, 71.5) <zip object at 0x7fa581c90080>
> failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (72.0, 73.0) <zip object at 0x7fa581fd4f00>
> failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (80.0, 90.0) <zip object at 0x7fa581f63c80>
> failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (100.0, 200.0) <zip object at 0x7fa581f5c080>
17,19c17,19
< success 0.1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0']
< success 1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0']
< success 10 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (73.0, 74.0) <zip object at 0x7fa581fc6300>
> failed 1 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (73.0, 74.0) <zip object at 0x7fa581fc9f40>
> failed 10 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) <zip object at 0x7fa581fc9a00>
21,50c21,24
< success 0.1 ['--step-length', '1', '--end', '1000'] ['3/1to2/1_0']
< success 1 ['--step-length', '1', '--end', '1000'] ['3/1to2/1_0']
< success 10 ['--step-length', '1', '--end', '1000'] ['3/1to2/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output teleport ( Last six runs Sep2022 Aug2022 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
1,98c1,48
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
< success ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0']
< success ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0']
< success ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0']
< success ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0']
< success ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0']
< success ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0']
< success ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0']
< success ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0']
< failed ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (108.6, 108.7) [9.9, 10.0, 9.9, 9.9]
< failed ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (108.6, 108.7) [9.9, 10.0, 9.9, 9.9]
< failed ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (108.0, 109.0) [9.87, 10.0, 9.87, 9.87]
< failed ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (108.0, 109.0) [9.87, 10.0, 9.87, 9.87]
< failed ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (100.0, 110.0) [9.85, 9.96, 9.85, 9.85]
< failed ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (100.0, 110.0) [9.85, 9.96, 9.85, 9.85]
< failed ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (100.0, 200.0) [-1.0, 2.26, 3.2, 2.27, 2.27]
< failed ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (100.0, 200.0) [-1.0, 2.26, 3.2, 2.27, 2.27]
< success ['--step-length', '1', '--end', '51'] ['2/1to1/1_0']
< success ['--step-length', '1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
< success ['--step-length', '1', '--end', '51'] ['2/1to1/1_0']
< success ['--step-length', '1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
< success ['--step-length', '1', '--end', '51'] ['2/1to1/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output teleport_multihop ( Last six runs Sep2022 Aug2022 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
17,24c17,24
< success 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (230.0, 230.1) [('e2', 9.99), ('e3', 10.0), ('edge', 9.99), ('lane', 9.99)]
< success 0.1 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (148.1, 148.2) [('e2', 9.99), ('e3', 10.0), ('edge', 9.99), ('lane', 9.99)]
< success 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (230.0, 231.0) [('e2', 9.99), ('e3', 10.0), ('edge', 9.99), ('lane', 9.99)]
< success 1 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (148.0, 149.0) [('e2', 9.91), ('e3', 10.0), ('edge', 9.91), ('lane', 9.91)]
< success 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (230.0, 240.0) [('e2', 9.42), ('e3', 9.9), ('edge', 9.42), ('lane', 9.42)]
< success 10 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (140.0, 150.0) [('e2', 9.96), ('e3', 9.99), ('edge', 9.96), ('lane', 9.96)]
< success 100 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (200.0, 300.0) [('e1', 10.0), ('e2', 9.22), ('e3', 5.71), ('edge', 9.22), ('lane', 9.22)]
< success 100 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (100.0, 200.0) [('e1', 9.53), ('e2', 5.82), ('e3', 6.93), ('edge', 5.82), ('lane', 5.82)]
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (148.9, 149.0) <zip object at 0x7f62cc1fe1c0>
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (148.9, 149.0) <zip object at 0x7f62cbef90c0>
> failed 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (149.0, 150.0) <zip object at 0x7f62cc3df280>
> failed 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (149.0, 150.0) <zip object at 0x7f62cc707d40>
> failed 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (140.0, 150.0) <zip object at 0x7f62cc6c0240>
> failed 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (140.0, 150.0) <zip object at 0x7f62cc6c0a00>
> failed 100 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (100.0, 200.0) <zip object at 0x7f62cc6c0680>
> failed 100 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (100.0, 200.0) <zip object at 0x7f62cc6c0d00>
41,98c41,48
< success 0.1 ['--step-length', '1', '--end', '1000'] 2/1to1/1_0 (245.0, 246.0) [('e2', 8.92), ('e3', 10.0), ('edge', 8.92), ('lane', 8.92)]
< success 0.1 ['--step-length', '1', '--end', '1000'] 1/1to0/1_0 (150.0, 151.0) [('e2', 9.82), ('e3', 10.0), ('edge', 9.82), ('lane', 9.82)]
< success 1 ['--step-length', '1', '--end', '1000'] 2/1to1/1_0 (245.0, 246.0) [('e2', 8.92), ('e3', 10.0), ('edge', 8.92), ('lane', 8.92)]
< success 1 ['--step-length', '1', '--end', '1000'] 1/1to0/1_0 (150.0, 151.0) [('e2', 9.82), ('e3', 10.0), ('edge', 9.82), ('lane', 9.82)]
< success 10 ['--step-length', '1', '--end', '1000'] 2/1to1/1_0 (240.0, 250.0) [('e2', 9.9), ('e3', 10.0), ('edge', 9.9), ('lane', 9.9)]
< success 10 ['--step-length', '1', '--end', '1000'] 1/1to0/1_0 (150.0, 160.0) [('e2', 9.15), ('e3', 9.84), ('edge', 9.15), ('lane', 9.15)]
< success 100 ['--step-length', '1', '--end', '1000'] 2/1to1/1_0 (200.0, 300.0) [('e1', 10.0), ('e2', 9.41), ('e3', 5.84), ('edge', 9.41), ('lane', 9.41)]
< success 100 ['--step-length', '1', '--end', '1000'] 1/1to0/1_0 (100.0, 200.0) [('e1', 10.0), ('e2', 5.94), ('e3', 7.08), ('edge', 5.94), ('lane', 5.94)]
< -- Unordered text as found by filter '^Loading configuration ... done.' --
< Loading configuration ... done.
< Loading configuration ... done.
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output teleport_multihop_newDefaults ( Last six runs Sep2022 Aug2022 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
9,24c9,24
< failed 0.1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.2, 76.3) [('e2', 10.49), ('e3', 10.35), ('edge', 10.49), ('lane', 10.49)]
< failed 0.1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.2, 76.3) [('e2', 10.49), ('e3', 10.35), ('edge', 10.49), ('lane', 10.49)]
< failed 1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.0, 77.0) [('e2', 10.39), ('e3', 10.35), ('edge', 10.39), ('lane', 10.39)]
< failed 1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.0, 77.0) [('e2', 10.39), ('e3', 10.35), ('edge', 10.39), ('lane', 10.39)]
< failed 10 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.0, 80.0) [('e2', 10.42), ('e3', 10.25), ('edge', 10.42), ('lane', 10.42)]
< failed 10 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.0, 80.0) [('e2', 10.42), ('e3', 10.25), ('edge', 10.42), ('lane', 10.42)]
< failed 100 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (0.0, 100.0) [('e1', 10.27), ('e2', 10.24), ('e3', 9.59), ('edge', 10.24), ('lane', 10.24)]
< failed 100 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (0.0, 100.0) [('e1', 10.27), ('e2', 10.24), ('e3', 9.59), ('edge', 10.24), ('lane', 10.24)]
< failed 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (76.2, 76.3) [('e2', 10.49), ('e3', 10.35), ('edge', 10.49), ('lane', 10.49)]
< failed 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (76.2, 76.3) [('e2', 10.49), ('e3', 10.35), ('edge', 10.49), ('lane', 10.49)]
< failed 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (76.0, 77.0) [('e2', 10.39), ('e3', 10.35), ('edge', 10.39), ('lane', 10.39)]
< failed 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (76.0, 77.0) [('e2', 10.39), ('e3', 10.35), ('edge', 10.39), ('lane', 10.39)]
< failed 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (70.0, 80.0) [('e2', 10.42), ('e3', 10.25), ('edge', 10.42), ('lane', 10.42)]
< failed 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (70.0, 80.0) [('e2', 10.42), ('e3', 10.25), ('edge', 10.42), ('lane', 10.42)]
< failed 100 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (0.0, 100.0) [('e1', 10.27), ('e2', 10.24), ('e3', 9.59), ('edge', 10.24), ('lane', 10.24)]
< failed 100 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (0.0, 100.0) [('e1', 10.27), ('e2', 10.24), ('e3', 9.59), ('edge', 10.24), ('lane', 10.24)]
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.9, 71.0) <zip object at 0x7f9d5dcb62c0>
> failed 0.1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.9, 71.0) <zip object at 0x7f9d5dc86440>
> failed 1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.0, 71.0) <zip object at 0x7f9d5dc942c0>
> failed 1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.0, 71.0) <zip object at 0x7f9d5dc948c0>
> failed 10 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.0, 80.0) <zip object at 0x7f9d5dc94c00>
> failed 10 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.0, 80.0) <zip object at 0x7f9d5dc94ec0>
> failed 100 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (0.0, 100.0) <zip object at 0x7f9d5dc94fc0>
> failed 100 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (0.0, 100.0) <zip object at 0x7f9d5dca3280>
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (70.9, 71.0) <zip object at 0x7f9d5d7a80c0>
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (70.9, 71.0) <zip object at 0x7f9d5d4962c0>
> failed 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (70.0, 71.0) <zip object at 0x7f9d5d9768c0>
> failed 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (70.0, 71.0) <zip object at 0x7f9d5dc945c0>
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output two_same_vehicles ( Last six runs Sep2022 Aug2022 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
5,7c5,7
< success 0.1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
< success 1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
< success 10 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (75.4, 75.5) <zip object at 0x7fabb5d08340>
> failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (76.0, 77.0) <zip object at 0x7fabb5d41fc0>
> failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) <zip object at 0x7fabb5d3e780>
9,12c9,12
< success 0.1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
< success 1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
< success 10 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
< success 100 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (75.4, 75.5) <zip object at 0x7fabb59cf3c0>
> failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (76.0, 77.0) <zip object at 0x7fabb5d11200>
> failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (80.0, 90.0) <zip object at 0x7fabb5d06c40>
> failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (100.0, 200.0) <zip object at 0x7fabb5c993c0>
17,19c17,19
< success 0.1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0']
< success 1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0']
< success 10 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (77.0, 78.0) <zip object at 0x7fabb5d31940>
> failed 1 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (77.0, 78.0) <zip object at 0x7fabb5d31700>
> failed 10 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) <zip object at 0x7fabb5d31540>
21,50c21,24
< success 0.1 ['--step-length', '1', '--end', '1000'] ['3/1to2/1_0']
< success 1 ['--step-length', '1', '--end', '1000'] ['3/1to2/1_0']
< success 10 ['--step-length', '1', '--end', '1000'] ['3/1to2/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output two_vehicles_diff_length ( Last six runs Sep2022 Aug2022 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
5,7c5,7
< success 0.1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
< success 1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
< success 10 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (76.4, 76.5) <zip object at 0x7fee27550440>
> failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (77.0, 78.0) <zip object at 0x7fee275b95c0>
> failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) <zip object at 0x7fee275b9fc0>
9,12c9,12
< success 0.1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
< success 1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
< success 10 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
< success 100 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (76.4, 76.5) <zip object at 0x7fee272322c0>
> failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (77.0, 78.0) <zip object at 0x7fee27577ec0>
> failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (80.0, 90.0) <zip object at 0x7fee2756e240>
> failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (100.0, 200.0) <zip object at 0x7fee2756e8c0>
17,19c17,19
< success 0.1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0']
< success 1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0']
< success 10 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (78.0, 79.0) <zip object at 0x7fee27574880>
> failed 1 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (78.0, 79.0) <zip object at 0x7fee27567600>
> failed 10 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) <zip object at 0x7fee27574b00>
21,50c21,24
< success 0.1 ['--step-length', '1', '--end', '1000'] ['3/1to2/1_0']
< success 1 ['--step-length', '1', '--end', '1000'] ['3/1to2/1_0']
< success 10 ['--step-length', '1', '--end', '1000'] ['3/1to2/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output two_vehicles_diff_speed ( Last six runs Sep2022 Aug2022 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
0a1,24
> failed 0.1 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (38.4, 38.5) <zip object at 0x7f97a836a4c0>
> failed 1 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (38.0, 39.0) <zip object at 0x7f97a8365f40>
> failed 10 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (30.0, 40.0) <zip object at 0x7f97a836a340>
> failed 100 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (0.0, 51.0) <zip object at 0x7f97a83674c0>
> failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (38.4, 38.5) <zip object at 0x7f97a8323340>
> failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (38.0, 39.0) <zip object at 0x7f97a8344e80>
> failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (30.0, 40.0) <zip object at 0x7f97a8344300>
> failed 100 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (0.0, 100.0) <zip object at 0x7f97a8302a00>
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (38.4, 38.5) <zip object at 0x7f97a7fe91c0>
> failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (38.0, 39.0) <zip object at 0x7f97a8320840>
> failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (30.0, 40.0) <zip object at 0x7f97a83ade80>
> failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (0.0, 100.0) <zip object at 0x7f97a82b3280>
> failed 0.1 ['--step-length', '1', '--end', '51'] 3/1to2/1_0 (39.0, 40.0) <zip object at 0x7f97a836ed40>
> failed 1 ['--step-length', '1', '--end', '51'] 3/1to2/1_0 (39.0, 40.0) <zip object at 0x7f97a836ef00>
> failed 10 ['--step-length', '1', '--end', '51'] 3/1to2/1_0 (30.0, 40.0) <zip object at 0x7f97a836e940>
> failed 100 ['--step-length', '1', '--end', '51'] 3/1to2/1_0 (0.0, 51.0) <zip object at 0x7f97a836e180>
> failed 0.1 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (39.0, 40.0) <zip object at 0x7f97a832eec0>
> failed 1 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (39.0, 40.0) <zip object at 0x7f97a836e640>
> failed 10 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (30.0, 40.0) <zip object at 0x7f97a836e500>
> failed 100 ['--step-length', '1', '--end', '100'] 3/1to2/1_0 (0.0, 100.0) <zip object at 0x7f97a836e300>
> failed 0.1 ['--step-length', '1', '--end', '1000'] 3/1to2/1_0 (39.0, 40.0) <zip object at 0x7f97a836e340>
> failed 1 ['--step-length', '1', '--end', '1000'] 3/1to2/1_0 (39.0, 40.0) <zip object at 0x7f97a8320e00>
> failed 10 ['--step-length', '1', '--end', '1000'] 3/1to2/1_0 (30.0, 40.0) <zip object at 0x7f97a836eb00>
> failed 100 ['--step-length', '1', '--end', '1000'] 3/1to2/1_0 (0.0, 100.0) <zip object at 0x7f97a82b3fc0>

TEST had known bugs (see #3263) on ts-sim-build-ba : traci vehicle moveToXY keepRoute2 ( Last six runs Sep2022 Aug2022 )

mapping failure
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
0a1
> internal corner (inside, segment2) failed: x=198, x2=198.0,   y=1.9, y2=1.9,   lane=middle_0, lane2=middle_0, pos=102, pos2=98.0   posLat=2.0 posLat2=1.9

TEST had known bugs (see #6192) on ts-sim-build-ba : traci vehicle openGap with_low_maxDecel_fast_CACC ( Last six runs Sep2022 Aug2022 )

not even failing as intended
(This bug was triggered by text found in file 'errors' matching 'Error')
---------- Differences in errors ----------
0a1,8
> Traceback (most recent call last):
>   File "/home/delphi/gcc/sumo/tests/../tests/complex/traci/vehicle/openGap/runner.py", line 156, in <module>
>     runSingle(targetTimeHeadway, targetSpaceHeadway, duration, changeRate, maxDecel, refVehID)
>   File "/home/delphi/gcc/sumo/tests/../tests/complex/traci/vehicle/openGap/runner.py", line 66, in runSingle
>     leader = results[tc.VAR_LEADER][0]
> TypeError: 'NoneType' object is not subscriptable
> Error: tcpip::Socket::recvAndCheck @ recv: peer shutdown
> Quitting (on error).
---------- Differences in output ----------
3,102c3,102
< Time 2.0: Gap 'follower'->'leader' = 5.938 (headway=0.367)
< 'follower' speed = 16.161582708
< Time 3.0: Gap 'follower'->'leader' = 8.966 (headway=0.528)
< 'follower' speed = 16.9836198736
< Time 4.0: Gap 'follower'->'leader' = 11.281 (headway=0.641)
< 'follower' speed = 17.5863190784
< Time 5.0: Gap 'follower'->'leader' = 13.069 (headway=0.725)
< 'follower' speed = 18.0379935645
< Time 6.0: Gap 'follower'->'leader' = 14.459 (headway=0.787)
< 'follower' speed = 18.3815472225
< Time 7.0: Gap 'follower'->'leader' = 15.545 (headway=0.834)
< 'follower' speed = 18.6456171431
< Time 8.0: Gap 'follower'->'leader' = 16.397 (headway=0.870)
< 'follower' speed = 18.8501483763
< Time 9.0: Gap 'follower'->'leader' = 17.068 (headway=0.898)
< 'follower' speed = 19.0094667411
< Time 10.0: Gap 'follower'->'leader' = 17.596 (headway=0.920)
< 'follower' speed = 19.1340998278
< Time 11.0: Gap 'follower'->'leader' = 18.013 (headway=0.937)
< 'follower' speed = 19.231918606
< Time 12.0: Gap 'follower'->'leader' = 18.342 (headway=0.950)
< 'follower' speed = 19.3088858604
< Time 13.0: Gap 'follower'->'leader' = 18.603 (headway=0.960)
< 'follower' speed = 19.3695649077
< Time 14.0: Gap 'follower'->'leader' = 18.810 (headway=0.969)
< 'follower' speed = 19.4174756866
< Time 15.0: Gap 'follower'->'leader' = 18.973 (headway=0.975)
< 'follower' speed = 19.4553500651
< Time 16.0: Gap 'follower'->'leader' = 19.103 (headway=0.980)
<truncated after showing first 30 lines>