08Aug20rv1_6_0+1462-a775417066 - detailed test results for COMPLEX

To reconnect the TextTest GUI to these results, run:

texttest -a complex -d /home/delphi/gcc/sumo/tests -reconnect /home/delphi/gcc/texttesttmp/gcc4_64.31Aug002101.18820 -g

To start TextTest for these tests, run:

texttest -a complex -d /home/delphi/gcc/sumo/tests


default: 374 tests: 303 succeeded 57 FAILED 14 known bugs

Detailed information for the tests that FAILED:

3 TESTS FAILED on ts-sim-build-ba :

---------- Differences in errors ----------
1,338c1,3
< ------------------ net/edge[0]@from:
< Error: Attribute 'from' in definition of edge '1' is empty.
< Warning: Skipping isolated junction '1'.
< Error: unknown from-edge '1' in connection
< Quitting (on error).
< ------------------ net/edge[1]@from:
< Error: Attribute 'from' in definition of edge '2' is empty.
< Warning: Skipping isolated junction '3'.
< Error: unknown to-edge '2' in connection
< Quitting (on error).
< ------------------ net/edge[0]@from:a
< Warning: Skipping isolated junction '1'.
< Error: Unknown node 'a'.
< Quitting (on error).
< ------------------ net/edge[1]@from:a
< Error: Unknown node 'a'.
< Quitting (on error).
< ------------------ net/edge[0]@from:<remove>
< Error: Attribute 'from' is missing in definition of edge '1'.
< Warning: Skipping isolated junction '1'.
< Error: unknown from-edge '1' in connection
< Quitting (on error).
< ------------------ net/edge[1]@from:<remove>
< Error: Attribute 'from' is missing in definition of edge '2'.
< Warning: Skipping isolated junction '3'.
< Error: unknown to-edge '2' in connection
< Quitting (on error).
< ------------------ net/edge[0]@function:a
< Error: value 'a' not in enumeration
<truncated after showing first 30 lines>
---------- Differences in output ----------
2,3d1
< Success.
< Success.
6,25c4
< >>> ok...
< 
< Running broken net
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
---
> Error on processing the 'correct' network!
broken_nets dfrouter ( Last six runs Aug2020 )
broken_nets duarouter ( Last six runs Aug2020 )
broken_nets jtrrouter ( Last six runs Aug2020 )

3 TESTS FAILED on ts-sim-build-ba :

---------- Differences in errors ----------
1,4c1,5
< ------------------ net/edge[0]@from:
< Error: Attribute 'from' in definition of edge '1' is empty.
< Warning: Skipping isolated junction '1'.
< Error: unknown from-edge '1' in connection
---
> Error: no declaration found for element 'nodes'
>  In file 'input_nodes.nod.xml'
>  At line/column 2/132.
> 
> Error: No nodes loaded.
6,9c7
< ------------------ net/edge[1]@from:
< Error: Attribute 'from' in definition of edge '2' is empty.
< Warning: Skipping isolated junction '3'.
< Error: unknown to-edge '2' in connection
---
> Error: The network file 'correct.net.xml' is not accessible.
11,477d8
< ------------------ net/edge[0]@from:a
< Warning: Skipping isolated junction '1'.
< Error: Unknown node 'a'.
< Quitting (on error).
< ------------------ net/edge[1]@from:a
< Error: Unknown node 'a'.
< Quitting (on error).
< ------------------ net/edge[0]@from:<remove>
< Error: Attribute 'from' is missing in definition of edge '1'.
< Warning: Skipping isolated junction '1'.
< Error: unknown from-edge '1' in connection
<truncated after showing first 30 lines>
---------- Differences in output ----------
2,3d1
< Success.
< Success.
6,42c4
< >>> ok...
< 
< Running broken net
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
<truncated after showing first 30 lines>
broken_nets dfrouter_no_validation ( Last six runs Aug2020 )
broken_nets duarouter_no_validation ( Last six runs Aug2020 )
broken_nets jtrrouter_no_validation ( Last six runs Aug2020 )

TEST FAILED on ts-sim-build-ba : broken_nets netconvert ( Last six runs Aug2020 )

---------- Differences in errors ----------
1,31c1,3
< ------------------ net/edge[0]@from:
< Error: Attribute 'from' in definition of edge '1' is empty.
< Error: Edge's '1' from-node '' is not known.
< Quitting (on error).
< ------------------ net/edge[1]@from:
< Error: Attribute 'from' in definition of edge '2' is empty.
< Error: Edge's '2' from-node '' is not known.
< Quitting (on error).
< ------------------ net/edge[0]@from:a
< Error: Edge's '1' from-node 'a' is not known.
< Quitting (on error).
< ------------------ net/edge[1]@from:a
< Error: Edge's '2' from-node 'a' is not known.
< Quitting (on error).
< ------------------ net/edge[0]@from:<remove>
< Error: Edge's '1' from-node '' is not known.
< Quitting (on error).
< ------------------ net/edge[1]@from:<remove>
< Error: Edge's '2' from-node '' is not known.
< Quitting (on error).
< ------------------ net/edge[0]@function:a
< Error: value 'a' not in enumeration
<  In file 'mod.net.xml'
<  At line/column 28/60.
< 
< Error: No nodes loaded.
< Quitting (on error).
< ------------------ net/edge[1]@function:a
< Error: value 'a' not in enumeration
<truncated after showing first 30 lines>
---------- Differences in output ----------
2,3d1
< Success.
< Success.
6,24c4
< >>> ok...
< 
< Running broken net
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
---
> Error on processing the 'correct' network!

TEST FAILED on ts-sim-build-ba : broken_nets netconvert_no_validation ( Last six runs Aug2020 )

---------- Differences in errors ----------
1,3c1,5
< ------------------ net/edge[0]@from:
< Error: Attribute 'from' in definition of edge '1' is empty.
< Error: Edge's '1' from-node '' is not known.
---
> Error: no declaration found for element 'nodes'
>  In file 'input_nodes.nod.xml'
>  At line/column 2/132.
> 
> Error: No nodes loaded.
5,7c7,8
< ------------------ net/edge[1]@from:
< Error: Attribute 'from' in definition of edge '2' is empty.
< Error: Edge's '2' from-node '' is not known.
---
> Error: File 'correct.net.xml' is not accessible (No such file or directory).
> Error: No nodes loaded.
9,443d9
< ------------------ net/edge[0]@from:a
< Error: Edge's '1' from-node 'a' is not known.
< Quitting (on error).
< ------------------ net/edge[1]@from:a
< Error: Edge's '2' from-node 'a' is not known.
< Quitting (on error).
< ------------------ net/edge[0]@from:<remove>
< Error: Edge's '1' from-node '' is not known.
< Quitting (on error).
< ------------------ net/edge[1]@from:<remove>
< Error: Edge's '2' from-node '' is not known.
< Quitting (on error).
<truncated after showing first 30 lines>
---------- Differences in output ----------
2,3d1
< Success.
< Success.
6,63c4
< >>> ok...
< 
< Running broken net
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : broken_nets sumo ( Last six runs Aug2020 )

---------- Differences in errors ----------
1,377c1,3
< ------------------ net/edge[0]@from:
< Error: Attribute 'from' in definition of edge '1' is empty.
< Error: An unknown lane ('1_0') was tried to be set as incoming to junction '2'.
< Error: Unknown from-edge '1' in connection.
< Error: Unknown from-edge '1' in connection.
< Error: Unknown from-node '' for edge '1'.
< Quitting (on error).
< ------------------ net/edge[1]@from:
< Error: Attribute 'from' in definition of edge '2' is empty.
< Error: An unknown lane ('2_0') was tried to be set as incoming to junction '3'.
< Error: Unknown to-edge '2' in connection.
< Error: Unknown to-edge '2' in connection.
< Error: Unknown from-node '' for edge '2'.
< Quitting (on error).
< ------------------ net/edge[0]@from:a
< Error: Unknown from-node 'a' for edge '1'.
< Quitting (on error).
< ------------------ net/edge[1]@from:a
< Error: Unknown from-node 'a' for edge '2'.
< Quitting (on error).
< ------------------ net/edge[0]@from:<remove>
< Error: Attribute 'from' is missing in definition of edge '1'.
< Error: An unknown lane ('1_0') was tried to be set as incoming to junction '2'.
< Error: Unknown from-edge '1' in connection.
< Error: Unknown from-edge '1' in connection.
< Error: Unknown from-node '' for edge '1'.
< Quitting (on error).
< ------------------ net/edge[1]@from:<remove>
< Error: Attribute 'from' is missing in definition of edge '2'.
<truncated after showing first 30 lines>
---------- Differences in output ----------
2d1
< Success.
5,7c4
< >>> ok...
< 
< Running broken net
---
> Error on processing the 'correct' network!

TEST FAILED on ts-sim-build-ba : broken_nets sumo_no_validation ( Last six runs Aug2020 )

---------- Differences in errors ----------
1,6c1,5
< ------------------ net/edge[0]@from:
< Error: Attribute 'from' in definition of edge '1' is empty.
< Error: An unknown lane ('1_0') was tried to be set as incoming to junction '2'.
< Error: Unknown from-edge '1' in connection.
< Error: Unknown from-edge '1' in connection.
< Error: Unknown from-node '' for edge '1'.
---
> Error: no declaration found for element 'nodes'
>  In file 'input_nodes.nod.xml'
>  At line/column 2/132.
> 
> Error: No nodes loaded.
8,821c7
< ------------------ net/edge[1]@from:
< Error: Attribute 'from' in definition of edge '2' is empty.
< Error: An unknown lane ('2_0') was tried to be set as incoming to junction '3'.
< Error: Unknown to-edge '2' in connection.
< Error: Unknown to-edge '2' in connection.
< Error: Unknown from-node '' for edge '2'.
< Quitting (on error).
< ------------------ net/edge[0]@from:a
< Error: Unknown from-node 'a' for edge '1'.
< Quitting (on error).
< ------------------ net/edge[1]@from:a
< Error: Unknown from-node 'a' for edge '2'.
< Quitting (on error).
< ------------------ net/edge[0]@from:<remove>
< Error: Attribute 'from' is missing in definition of edge '1'.
< Error: An unknown lane ('1_0') was tried to be set as incoming to junction '2'.
<truncated after showing first 30 lines>
---------- Differences in output ----------
2d1
< Success.
5,7c4
< >>> ok...
< 
< Running broken net
---
> Error on processing the 'correct' network!

TEST FAILED on ts-sim-build-ba : jtrrouter randomized_flow ( Last six runs Aug2020 )

---------- Differences in errors ----------
1,2c1,11
< Warning: The turn-file format with elements fromEdge, toEdge is deprecated, please use edgeRelation instead.
< Warning: The turn-file format with elements fromEdge, toEdge is deprecated, please use edgeRelation instead.
---
> Error: no declaration found for element 'turns'
>  In file 'input_turns.turns.xml'
>  At line/column 3/132.
> 
> Quitting (on error).
> Traceback (most recent call last):
>   File "/home/delphi/gcc/sumo/tests/../tests/complex/jtrrouter/randomized_flow/runner.py", line 56, in <module>
>     route_lines1 = get_depart_lines(output_file1)
>   File "/home/delphi/gcc/sumo/tests/../tests/complex/jtrrouter/randomized_flow/runner.py", line 35, in get_depart_lines
>     return [l for l in open(route_file) if 'depart' in l]
> IOError: [Errno 2] No such file or directory: 'output1.rou.xml'
---------- Differences in output ----------
1,3d0
< Success.
< Success.
< test passed. output is random

TEST FAILED on ts-sim-build-ba : netconvert left_turn_noblocking_double_intersection ( Last six runs Aug2020 )

---------- Differences in errors ----------
1,2c1,12
< Warning: Intersecting left turns at junction 'cluster_node_C_node_C2' from lane 'edge_U2C2_0' and lane 'edge_D2C_0' (increase junction radius to avoid this).
< Warning: Intersecting left turns at junction 'cluster_node_C_node_C2' from lane 'edge_R2C2_0' and lane 'edge_L2C_0' (increase junction radius to avoid this).
---
> Error: no declaration found for element 'nodes'
>  In file 'input_nodes.nod.xml'
>  At line/column 2/132.
> 
> Error: No nodes loaded.
> Quitting (on error).
> Error: File 'joined.net.xml' is not accessible (No such file or directory).
> Quitting (on error).
> Traceback (most recent call last):
>   File "/home/delphi/gcc/sumo/tests/../tests/complex/netconvert/left_turn_noblocking_double_intersection/runner.py", line 57, in <module>
>     for line in open(trips_output):
> IOError: [Errno 2] No such file or directory: 'trips.log'
---------- Differences in output ----------
1,2d0
< Success.
< test passed. no blocking occured

TEST FAILED on ts-sim-build-ba : netconvert left_turn_noblocking_longveh ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,12
> Error: no declaration found for element 'nodes'
>  In file 'input_nodes.nod.xml'
>  At line/column 2/132.
> 
> Error: No nodes loaded.
> Quitting (on error).
> Error: File 'joined.net.xml' is not accessible (No such file or directory).
> Quitting (on error).
> Traceback (most recent call last):
>   File "/home/delphi/gcc/sumo/tests/../tests/complex/netconvert/left_turn_noblocking_longveh/runner.py", line 57, in <module>
>     for line in open(trips_output):
> IOError: [Errno 2] No such file or directory: 'trips.log'
---------- Differences in output ----------
1,2d0
< Success.
< test passed. no blocking occured

TEST FAILED on ts-sim-build-ba : netconvert matsim_roundtrip ( Last six runs Aug2020 )

---------- Differences in errors ----------
2,9c2,7
< Warning: Ambiguity in turnarounds computation at junction '294168098'.
< Warning: Ambiguity in turnarounds computation at junction '294168710'.
< Warning: Ambiguity in turnarounds computation at junction '294830184'.
< Warning: Ambiguity in turnarounds computation at junction '294830189'.
< Warning: Ambiguity in turnarounds computation at junction '294831560'.
< Warning: Intersecting left turns at junction '294830184' from lane '26843038#2_0' and lane '26843038#0_0' (increase junction radius to avoid this).
< Warning: Intersecting left turns at junction '294831560' from lane '26843133#2_0' and lane '-26843133#1_0' (increase junction radius to avoid this).
< Warning: 6 total messages of type: Ambiguity in turnarounds computation at junction '%'.
---
> Error: no declaration found for element 'network'
>  In file 'matsim'
>  At line/column 5/22.
> 
> Error: No nodes loaded.
> Quitting (on error).
---------- Differences in output ----------
2d1
< Success.
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="0.00,-19.68" convBoundary="0.00,0.00,1737.68,747.71" origBoundary="0.00,19.68,1737.68,767.39" projParameter="!"/>

    <edge id=":175648134_0" function="internal">
        <lane id=":175648134_0_0" index="0" speed="3.65" length="4.67" shape="15.89,149.97 14.59,149.33 14.09,148.59 14.39,147.74 15.47,146.79"/>
    </edge>
    <edge id=":261599791_0" function="internal">
        <lane id=":261599791_0_0" index="0" speed="27.78" length="0.23" shape="34.71,161.64 34.51,161.66"/>
        <lane id=":261599791_0_1" index="1" speed="27.78" length="0.23" shape="34.31,158.46 34.06,158.49"/>
    </edge>
    <edge id=":261599791_2" function="internal">
        <lane id=":261599791_2_0" index="0" speed="27.78" length="0.34" shape="33.15,152.16 33.52,152.11"/>
        <lane id=":261599791_2_1" index="1" speed="27.78" length="0.34" shape="33.60,155.33 33.91,155.28"/>
    </edge>
    <edge id=":261636677_0" function="internal">
        <lane id=":261636677_0_0" index="0" speed="13.89" length="5.43" shape="1122.01,93.47 1121.38,94.93 1120.80,95.87 1120.06,96.71 1118.96,97.89"/>
    </edge>
    <edge id=":261636677_1" function="internal">
        <lane id=":261636677_1_0" index="0" speed="5.27" length="6.17" shape="1122.01,93.47 1120.57,96.38 1119.43,97.03 1118.69,95.59"/>
    </edge>
    <edge id=":261636677_4" function="internal">
        <lane id=":261636677_4_0" index="0" speed="5.27" length="4.15" shape="1118.69,95.59 1118.59,95.40 1118.05,91.51"/>
    </edge>
    <edge id=":261636677_2" function="internal">
        <lane id=":261636677_2_0" index="0" speed="7.05" length="4.59" shape="1116.60,95.72 1117.30,94.79 1117.78,93.77 1118.03,92.68 1118.05,91.51"/>
    </edge>
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : netconvert opendrive_roundtrip ( Last six runs Aug2020 )

---------- Differences in errors ----------
2a3,6
> Error: no declaration found for element 'types'
>  In file 'input_types.typ.xml'
>  At line/column 2/132.
> 
4c8,15
< Warning: Found sharp turn with radius 1.08 at the end of edge '-823.0.00'.
---
> Warning: Edge '750' has no lanes.
> Warning: Edge '751' has no lanes.
> Warning: Edge '752' has no lanes.
> Warning: Edge '753' has no lanes.
> Warning: Edge '754' has no lanes.
> Error: No edges loaded.
> Quitting (on error).
> Warning: 191 total messages of type: Edge '%' has no lanes.
---------- Differences in output ----------
2d1
< Success.
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" rectangularLaneCut="true" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="0.02,-0.28" convBoundary="0.00,0.00,1738.51,765.99" origBoundary="-0.02,0.28,1740.72,766.26" projParameter="!"/>

    <type id="biking" priority="1" speed="22.22" allow="bicycle" width="1.50"/>
    <type id="driving" priority="1" speed="22.22" disallow="pedestrian" width="3.65"/>
    <type id="mwyEntry" priority="1" speed="22.22" disallow="pedestrian" width="3.65"/>
    <type id="mwyExit" priority="1" speed="22.22" disallow="pedestrian" width="3.65"/>
    <type id="parking" priority="1" speed="1.39" disallow="pedestrian" width="3.65"/>
    <type id="restricted" priority="1" speed="22.22" allow="pedestrian bicycle" width="1.50"/>
    <type id="sidewalk" priority="1" speed="22.22" allow="pedestrian" width="2.50"/>
    <type id="special1" priority="1" speed="22.22" disallow="pedestrian" width="3.65"/>
    <type id="stop" priority="1" speed="22.22" disallow="pedestrian" width="3.65"/>

    <edge id=":1_0" function="internal">
        <lane id=":1_0_0" index="0" disallow="pedestrian" speed="3.65" length="4.67" width="3.20" shape="471.07,47.45 471.77,46.19 472.53,45.72 473.36,46.05 474.26,47.18"/>
    </edge>
    <edge id=":10_0" function="internal">
        <lane id=":10_0_0" index="0" disallow="all" speed="11.11" length="22.90" width="3.20" shape="377.18,471.96 373.02,469.17 367.61,465.56 362.09,462.21 357.57,460.25"/>
    </edge>
    <edge id=":10_1" function="internal">
        <lane id=":10_1_0" index="0" disallow="all" speed="5.83" length="13.79" width="3.20" shape="377.18,471.96 375.07,469.09 375.37,465.77 377.55,463.25 381.09,462.80"/>
    </edge>
    <edge id=":10_2" function="internal">
        <lane id=":10_2_0" index="0" allow="pedestrian" speed="3.65" length="4.67" width="3.20" shape="377.18,471.96 376.60,470.64 376.68,469.75 377.45,469.29 378.89,469.25"/>
    </edge>
    <edge id=":10_3" function="internal">
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : netconvert osm_roundtrip ( Last six runs Aug2020 )

---------- Differences in errors ----------
1,22c1,4
< Warning: Discarding unusable type 'waterway.riverbank' (first occurence for edge '4616435').
< Warning: Discarding unusable type 'waterway.canal' (first occurence for edge '5363708').
< Warning: Discarding unknown compound 'cycleway.opposite_track' in type 'cycleway.opposite_track|highway.primary' (first occurence for edge '7216737').
< Warning: Discarding unusable type 'railway.construction' (first occurence for edge '11390634').
< Warning: Discarding unusable type 'highway.construction' (first occurence for edge '24154002').
< Warning: Discarding unknown compound 'cycleway.track' in type 'cycleway.track|highway.primary' (first occurence for edge '24214693').
< Warning: Reducing junction cluster 283018817,38919652,38919712,38919808 (5 incoming edges).
< Warning: Minor green from edge '7216737#3' to edge '24214694' exceeds 19.44m/s. Maybe a left-turn lane is missing.
< Warning: Minor green from edge '-24214693#0' to edge '-7727483#3' exceeds 19.44m/s. Maybe a left-turn lane is missing.
< Warning: Minor green from edge '7727483#1' to edge '-7216737#3' exceeds 19.44m/s. Maybe a left-turn lane is missing.
< Warning: Minor green from edge '-24214694' to edge '24214693#0' exceeds 19.44m/s. Maybe a left-turn lane is missing.
< --- 
< +++ 
< @@ -977,7 +977,7 @@
<      <junction id="38919927" type="priority" x="297.39" y="446.01" incLanes="-6137233#0_0" intLanes="" shape="297.39,446.01 296.76,449.15 297.39,446.01">
<          <request index="0" response="0" foes="0"/>
<      </junction>
< -    <junction id="38920501" type="priority" x="495.47" y="311.99" incLanes="27441289_0 -7727483#0_0" intLanes="" shape="492.27,312.15 498.66,311.83 498.65,311.60">
< +    <junction id="38920501" type="priority" x="495.47" y="311.99" incLanes="27441289_0 -7727483#0_0" intLanes="" shape="492.27,312.13 498.66,311.82 498.65,311.57">
<          <request index="0" response="00" foes="00"/>
<          <request index="1" response="00" foes="00"/>
<      </junction>
---
> Traceback (most recent call last):
>   File "/home/delphi/gcc/sumo/tests/../tests/complex/netconvert/osm_roundtrip/runner.py", line 40, in <module>
>     import texttestlib.default.fpdiff  # noqa
> ImportError: No module named texttestlib.default.fpdiff
---------- Differences in output ----------
1,2d0
< Success.
< Success.
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="-399345.66,-5809365.64" convBoundary="-1.27,0.00,1737.68,767.39" origBoundary="13.364829,52.424764,13.574340,52.459643" projParameter="+proj=utm +zone=33 +ellps=WGS84 +datum=WGS84 +units=m +no_defs"/>

    <type id="highway.bridleway" priority="1" numLanes="1" speed="2.78" allow="pedestrian" oneway="1" width="2.00"/>
    <type id="highway.bus_guideway" priority="1" numLanes="1" speed="27.78" allow="bus" oneway="1"/>
    <type id="highway.cycleway" priority="1" numLanes="1" speed="8.33" allow="bicycle" oneway="0" width="1.00"/>
    <type id="highway.footway" priority="1" numLanes="1" speed="2.78" allow="pedestrian" oneway="1" width="2.00"/>
    <type id="highway.ford" priority="1" numLanes="1" speed="2.78" allow="army" oneway="0"/>
    <type id="highway.living_street" priority="2" numLanes="1" speed="2.78" disallow="tram rail_urban rail rail_electric rail_fast ship" oneway="0"/>
    <type id="highway.motorway" priority="14" numLanes="2" speed="39.44" allow="private emergency authority army vip passenger hov taxi bus coach delivery truck trailer motorcycle evehicle custom1 custom2" oneway="1"/>
    <type id="highway.motorway_link" priority="9" numLanes="1" speed="22.22" allow="private emergency authority army vip passenger hov taxi bus coach delivery truck trailer motorcycle evehicle custom1 custom2" oneway="1"/>
    <type id="highway.path" priority="1" numLanes="1" speed="2.78" allow="pedestrian bicycle" oneway="1" width="2.00"/>
    <type id="highway.pedestrian" priority="1" numLanes="1" speed="2.78" allow="pedestrian" oneway="1" width="2.00"/>
    <type id="highway.primary" priority="12" numLanes="2" speed="27.78" disallow="tram rail_urban rail rail_electric rail_fast ship" oneway="0"/>
    <type id="highway.primary_link" priority="7" numLanes="1" speed="22.22" disallow="tram rail_urban rail rail_electric rail_fast ship" oneway="0"/>
    <type id="highway.raceway" priority="15" numLanes="2" speed="83.33" allow="vip" oneway="0"/>
    <type id="highway.residential" priority="3" numLanes="1" speed="13.89" disallow="tram rail_urban rail rail_electric rail_fast ship" oneway="0"/>
    <type id="highway.secondary" priority="11" numLanes="1" speed="27.78" disallow="tram rail_urban rail rail_electric rail_fast ship" oneway="0"/>
    <type id="highway.secondary_link" priority="6" numLanes="1" speed="22.22" disallow="tram rail_urban rail rail_electric rail_fast ship" oneway="0"/>
    <type id="highway.service" priority="1" numLanes="1" speed="5.56" allow="pedestrian delivery bicycle" oneway="0"/>
    <type id="highway.stairs" priority="1" numLanes="1" speed="1.39" allow="pedestrian" oneway="1" width="2.00"/>
    <type id="highway.step" priority="1" numLanes="1" speed="1.39" allow="pedestrian" oneway="1" width="2.00"/>
    <type id="highway.steps" priority="1" numLanes="1" speed="1.39" allow="pedestrian" oneway="1" width="2.00"/>
    <type id="highway.tertiary" priority="10" numLanes="1" speed="22.22" disallow="tram rail_urban rail rail_electric rail_fast ship" oneway="0"/>
    <type id="highway.tertiary_link" priority="5" numLanes="1" speed="22.22" disallow="tram rail_urban rail rail_electric rail_fast ship" oneway="0"/>
    <type id="highway.track" priority="1" numLanes="1" speed="5.56" disallow="tram rail_urban rail rail_electric rail_fast ship" oneway="0"/>
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : state diff_begin ( Last six runs Aug2020 )

---------- Differences in errors ----------
1c1,5
< Warning: State was written at a different time 50.00 than the begin time 10!
---
> Error: no declaration found for element 'snapshot'
>  In file 'state_50.00.xml.gz'
>  At line/column 25/181.
> 
> Quitting (on error).
---------- Differences in vehroutes ----------
5,12d4
<     <vehicle id="0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="174.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="1" type="DEFAULT_VEHTYPE" depart="5.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="176.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 

TEST FAILED on ts-sim-build-ba : state disconnected ( Last six runs Aug2020 )

---------- Differences in errors ----------
5,8c5,9
< Warning: Teleporting vehicle '0'; waited too long (wrong lane), lane='4/1to3/1_0', time=332.00.
< Warning: Vehicle '0' ends teleporting on edge '2/1to1/1', time 332.00.
< Warning: Teleporting vehicle '1'; waited too long (wrong lane), lane='4/1to3/1_0', time=637.00.
< Warning: Vehicle '1' ends teleporting on edge '2/1to1/1', time 637.00.
---
> Error: no declaration found for element 'snapshot'
>  In file 'state.sbx'
>  At line/column 30/181.
> 
> Quitting (on error).
---------- Differences in vehroutes ----------
5,12d4
<     <vehicle id="0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="432.00">
<         <route edges="4/1to3/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="1" type="DEFAULT_VEHTYPE" depart="5.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="776.00">
<         <route edges="4/1to3/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 

TEST FAILED on ts-sim-build-ba : state dists ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,5
> Error: no declaration found for element 'snapshot'
>  In file 'state.sbx'
>  At line/column 26/181.
> 
> Quitting (on error).
---------- Differences in vehroutes ----------
5,12d4
<     <vehicle id="0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="260.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="1" type="DEFAULT_VEHTYPE" depart="5.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="262.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 

TEST FAILED on ts-sim-build-ba : state dists_gz ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,5
> Error: no declaration found for element 'snapshot'
>  In file 'state.gz'
>  At line/column 26/181.
> 
> Quitting (on error).
---------- Differences in vehroutes ----------
5,12d4
<     <vehicle id="0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="260.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="1" type="DEFAULT_VEHTYPE" depart="5.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="262.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 

2 TESTS FAILED on ts-sim-build-ba :

---------- Differences in errors ----------
0a1,5
> Error: no declaration found for element 'snapshot'
>  In file 'state.xml'
>  At line/column 26/181.
> 
> Quitting (on error).
---------- Differences in vehroutes ----------
5,12d4
<     <vehicle id="0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="260.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="1" type="DEFAULT_VEHTYPE" depart="5.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="262.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
state dists_xml ( Last six runs Aug2020 )
state xml ( Last six runs Aug2020 )

TEST FAILED on ts-sim-build-ba : state flow ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,5
> Error: no declaration found for element 'snapshot'
>  In file 'state.xml'
>  At line/column 26/181.
> 
> Quitting (on error).
---------- Differences in vehroutes ----------
5,59d4
<     <vehicle id="0.0" type="DEFAULT_VEHTYPE" depart="0.00" speedFactor="1.06" arrival="254.00">
<         <routeDistribution>
<             <route replacedOnEdge="" reason="device.rerouting" replacedAtTime="0.00" probability="0" edges="0/1to1/1 3/1to4/1"/>
<             <route edges="0/1to1/1 1/1to2/1 2/1to3/1 3/1to4/1"/>
<         </routeDistribution>
<     </vehicle>
< 
<     <vehicle id="0.1" type="DEFAULT_VEHTYPE" depart="10.00" speedFactor="0.94" arrival="260.00">
<         <routeDistribution>
<             <route replacedOnEdge="" reason="device.rerouting" replacedAtTime="10.00" probability="0" edges="0/1to1/1 3/1to4/1"/>
<             <route edges="0/1to1/1 1/1to2/1 2/1to3/1 3/1to4/1"/>
<         </routeDistribution>
<     </vehicle>
< 
<     <vehicle id="0.2" type="DEFAULT_VEHTYPE" depart="20.00" speedFactor="1.01" arrival="262.00">
<         <routeDistribution>
<             <route replacedOnEdge="" reason="device.rerouting" replacedAtTime="20.00" probability="0" edges="0/1to1/1 3/1to4/1"/>
<             <route edges="0/1to1/1 1/1to2/1 2/1to3/1 3/1to4/1"/>
<         </routeDistribution>
<     </vehicle>
< 
<     <vehicle id="0.3" type="DEFAULT_VEHTYPE" depart="30.00" speedFactor="1.08" arrival="264.00">
<         <routeDistribution>
<             <route replacedOnEdge="" reason="device.rerouting" replacedAtTime="30.00" probability="0" edges="0/1to1/1 3/1to4/1"/>
<             <route edges="0/1to1/1 1/1to2/1 2/1to3/1 3/1to4/1"/>
<         </routeDistribution>
<     </vehicle>
< 
<     <vehicle id="0.4" type="DEFAULT_VEHTYPE" depart="40.00" speedFactor="1.03" arrival="341.00">
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : state multique ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,5
> Error: no declaration found for element 'snapshot'
>  In file 'state.xml'
>  At line/column 27/184.
> 
> Quitting (on error).
---------- Differences in vehroutes ----------
5,40d4
<     <vehicle id="0.1" type="DEFAULT_VEHTYPE" depart="00:00:10" speedFactor="0.94" arrival="00:00:29">
<         <route edges="SC CW"/>
<     </vehicle>
< 
<     <vehicle id="0.2" type="DEFAULT_VEHTYPE" depart="00:00:20" speedFactor="1.01" arrival="00:00:38">
<         <route edges="SC CW"/>
<     </vehicle>
< 
<     <vehicle id="0.3" depart="00:00:30" arrival="00:00:48">
<         <route edges="SC CW"/>
<     </vehicle>
< 
<     <vehicle id="0.4" depart="00:00:40" arrival="00:01:39">
<         <route edges="SC CW"/>
<     </vehicle>
< 
<     <vehicle id="0.5" depart="00:00:50" arrival="00:01:42">
<         <route edges="SC CW"/>
<     </vehicle>
< 
<     <vehicle id="0.6" depart="00:01:00" arrival="00:01:45">
<         <route edges="SC CW"/>
<     </vehicle>
< 
<     <vehicle id="0.7" depart="00:01:10" arrival="00:01:47">
<         <route edges="SC CW"/>
<     </vehicle>
< 
<     <vehicle id="0.8" depart="00:01:20" arrival="00:01:49">
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : state plain ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,5
> Error: no declaration found for element 'snapshot'
>  In file 'state.sbx'
>  At line/column 26/181.
> 
> Quitting (on error).
---------- Differences in tls_state ----------
5,217d4
<     <tlsState time="50.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="51.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="52.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="53.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="54.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="55.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="56.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="57.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="58.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="59.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="60.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="61.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="62.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="63.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="64.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="65.00" id="0/0" programID="0" phase="3" state="yryy"/>
<     <tlsState time="66.00" id="0/0" programID="0" phase="3" state="yryy"/>
<     <tlsState time="67.00" id="0/0" programID="0" phase="3" state="yryy"/>
<     <tlsState time="68.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<     <tlsState time="69.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<     <tlsState time="70.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<     <tlsState time="71.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<     <tlsState time="72.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<     <tlsState time="73.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<     <tlsState time="74.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<     <tlsState time="75.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<     <tlsState time="76.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<     <tlsState time="77.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<     <tlsState time="78.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<truncated after showing first 30 lines>
---------- Differences in vehroutes ----------
5,13d4
<     <vehicle id="0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="260.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="1" type="DEFAULT_VEHTYPE" depart="5.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="262.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<         <stop lane="3/1to2/1_0" startPos="399.80" endPos="400.00" duration="10.00"/>
<     </vehicle>
< 

TEST FAILED on ts-sim-build-ba : state prefix ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,5
> Error: no declaration found for element 'snapshot'
>  In file 'statep_50.00.xml.gz'
>  At line/column 26/181.
> 
> Quitting (on error).
---------- Differences in vehroutes ----------
5,12d4
<     <vehicle id="0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="260.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="1" type="DEFAULT_VEHTYPE" depart="5.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="262.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 

TEST FAILED on ts-sim-build-ba : state rerouting ( Last six runs Aug2020 )

---------- Differences in errors ----------
9,14c9,13
< Warning: Teleporting vehicle 'veh70'; waited too long (yield), lane='gneE2_0', time=1073.00.
< Warning: Vehicle 'veh70' ends teleporting on edge 'gneE3', time 1073.00.
< Warning: Teleporting vehicle 'veh71'; waited too long (yield), lane='gneE2_0', time=1378.00.
< Warning: Vehicle 'veh71' ends teleporting on edge 'gneE3', time 1378.00.
< Warning: Teleporting vehicle 'veh72'; waited too long (yield), lane='gneE2_0', time=1684.00.
< Warning: Vehicle 'veh72' ends teleporting on edge 'gneE3', time 1684.00.
---
> Error: no declaration found for element 'snapshot'
>  In file 'state.xml'
>  At line/column 26/182.
> 
> Quitting (on error).
---------- Differences in vehroutes2 ----------
5,2258d4
<     <vehicle id="veh130" type="default" depart="395.00" departPos="1.00" arrivalPos="80.00" arrivalSpeed="0.00" speedFactor="1.01" arrival="500.00">
<         <routeDistribution>
<             <route replacedOnEdge="" reason="device.rerouting" replacedAtTime="130.00" probability="0" edges="gneE0 gneE3"/>
<             <route edges="gneE0 gneE4 gneE5 gneE3"/>
<         </routeDistribution>
<     </vehicle>
< 
<     <vehicle id="veh131" type="default" depart="399.00" departPos="1.00" arrivalPos="80.00" arrivalSpeed="0.00" speedFactor="1.03" arrival="504.00">
<         <routeDistribution>
<             <route replacedOnEdge="" reason="device.rerouting" replacedAtTime="131.00" probability="0" edges="gneE0 gneE3"/>
<             <route edges="gneE0 gneE4 gneE5 gneE3"/>
<         </routeDistribution>
<     </vehicle>
< 
<     <vehicle id="veh132" type="default" depart="403.00" departPos="1.00" arrivalPos="80.00" arrivalSpeed="0.00" speedFactor="1.07" arrival="507.00">
<         <routeDistribution>
<             <route replacedOnEdge="" reason="device.rerouting" replacedAtTime="132.00" probability="0" edges="gneE0 gneE3"/>
<             <route edges="gneE0 gneE4 gneE5 gneE3"/>
<         </routeDistribution>
<     </vehicle>
< 
<     <vehicle id="veh133" type="default" depart="407.00" departPos="1.00" arrivalPos="80.00" arrivalSpeed="0.00" speedFactor="0.96" arrival="511.00">
<         <routeDistribution>
<             <route replacedOnEdge="" reason="device.rerouting" replacedAtTime="133.00" probability="0" edges="gneE0 gneE3"/>
<             <route edges="gneE0 gneE4 gneE5 gneE3"/>
<         </routeDistribution>
<     </vehicle>
< 
<     <vehicle id="veh134" type="default" depart="412.00" departPos="1.00" arrivalPos="80.00" arrivalSpeed="0.00" speedFactor="1.04" arrival="515.00">
<truncated after showing first 30 lines>

2 TESTS FAILED on ts-sim-build-ba :

---------- Differences in errors ----------
1,16c1,8
< Warning: Speed of straight connection 'i2_0->i3_0' reduced by 5.29 due to turning radius of 13.45 (length=5.96, angle=41.99).
< Warning: Speed of straight connection 'i2_1->i3_1' reduced by 7.10 due to turning radius of 8.39 (length=3.58, angle=41.99).
< Warning: Speed of straight connection 'i2_2->i3_2' reduced by 9.61 due to turning radius of 3.33 (length=1.19, angle=41.99).
< Warning: Speed of straight connection 'i3_0->i4_0' reduced by 5.29 due to turning radius of 13.45 (length=5.96, angle=41.99).
< Warning: Speed of straight connection 'i3_1->i4_1' reduced by 7.10 due to turning radius of 8.39 (length=3.58, angle=41.99).
< Warning: 18 total messages of type: Speed of % connection '%' reduced by % due to turning radius of % (length=%, angle=%).
< Warning: Teleporting vehicle 'vehicle.582'; waited too long (jam), lane='i3_0', time=1605.00.
< Warning: Vehicle 'vehicle.582' ends teleporting on edge 'i4', time 1605.00.
< Warning: Teleporting vehicle 'vehicle.624'; waited too long (jam), lane='i2_0', time=1630.00.
< Warning: Vehicle 'vehicle.624' ends teleporting on edge 'i5', time 1779.00.
< Warning: Teleporting vehicle 'vehicle.561'; waited too long (jam), lane='i4_1', time=1897.00.
< Warning: Vehicle 'vehicle.561' ends teleporting on edge 'i5', time 1989.00.
< Warning: Teleporting vehicle 'vehicle.898'; waited too long (wrong lane), lane='i7_1', time=3286.00.
< Warning: Vehicle 'vehicle.898' ends teleporting on edge 'e3', time 3343.00.
< Warning: Teleporting vehicle 'vehicle.2009'; waited too long (jam), lane='i3_1', time=6150.00.
< Warning: Vehicle 'vehicle.2009' ends teleporting on edge 'i5', time 6286.00.
---
> Error: no declaration found for element 'nodes'
>  In file 'input_nodes.nod.xml'
>  At line/column 2/132.
> 
> Error: No nodes loaded.
> Quitting (on error).
> Error: File 'net.net.xml' is not accessible (No such file or directory).
> Quitting (on error).
---------- Differences in output ----------
1d0
< Success.
3,16d1
< Loading net-file from 'net.net.xml' ... done ((TIME)).
< Loading done.
< Simulation started with time: 0.00
< Reason: All vehicles have left the simulation.
< Performance: 
< Vehicles: 
<  Inserted: 3000
<  Running: 0
<  Waiting: 0
< Teleports: 5 (Jam: 4, Wrong Lane: 1)
< 
< -- Unordered text as found by filter '^Simulation ended at time:' --
< Simulation ended at time: 8795.00
< 
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="0.00,0.00" convBoundary="0.00,0.00,990.00,700.00" origBoundary="0.00,0.00,990.00,700.00" projParameter="!"/>

    <edge id=":f1_0" function="internal">
        <lane id=":f1_0_0" index="0" speed="8.27" length="6.71" shape="300.00,-8.00 301.71,-7.83 303.27,-7.34 304.68,-6.51 305.95,-5.35"/>
    </edge>
    <edge id=":f1_1" function="internal">
        <lane id=":f1_1_0" index="0" speed="6.54" length="4.02" shape="300.00,-4.80 301.02,-4.70 301.96,-4.40 302.81,-3.91 303.57,-3.21"/>
    </edge>
    <edge id=":f1_2" function="internal">
        <lane id=":f1_2_0" index="0" speed="4.15" length="1.34" shape="300.00,-1.60 300.34,-1.57 300.65,-1.47 300.94,-1.30 301.19,-1.07"/>
    </edge>
    <edge id=":f2_0" function="internal">
        <lane id=":f2_0_0" index="0" speed="8.60" length="3.58" shape="395.95,94.65 397.08,95.98 397.69,97.05 397.95,98.25 398.00,100.00"/>
        <lane id=":f2_0_1" index="1" speed="6.79" length="3.58" shape="393.57,96.79 394.25,97.59 394.62,98.23 394.77,98.95 394.80,100.00"/>
        <lane id=":f2_0_2" index="2" speed="4.28" length="3.58" shape="391.19,98.93 391.42,99.20 391.54,99.41 391.59,99.65 391.60,100.00"/>
    </edge>
    <edge id=":f3_0" function="internal">
        <lane id=":f3_0_0" index="0" speed="8.60" length="3.58" shape="398.00,300.00 397.95,301.75 397.69,302.95 397.08,304.02 395.95,305.35"/>
        <lane id=":f3_0_1" index="1" speed="6.79" length="3.58" shape="394.80,300.00 394.77,301.05 394.62,301.77 394.25,302.41 393.57,303.21"/>
        <lane id=":f3_0_2" index="2" speed="4.28" length="3.58" shape="391.60,300.00 391.59,300.35 391.54,300.59 391.42,300.80 391.19,301.07"/>
    </edge>
    <edge id=":f4_0" function="internal">
        <lane id=":f4_0_0" index="0" speed="8.27" length="6.71" shape="305.95,405.35 304.68,406.51 303.27,407.34 301.71,407.83 300.00,408.00"/>
    </edge>
    <edge id=":f4_1" function="internal">
<truncated after showing first 30 lines>
sumo b50 ( Last six runs Aug2020 )
traci gui b50 ( Last six runs Aug2020 )

TEST FAILED on ts-sim-build-ba : sumo binary ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,16
> Error: no declaration found for element 'nodes'
>  In file 'input_nodes.nod.xml'
>  At line/column 3/132.
> 
> Error: No nodes loaded.
> Quitting (on error).
> Error: no declaration found for element 'nodes'
>  In file 'input_nodes.nod.xml'
>  At line/column 3/132.
> 
> Error: No nodes loaded.
> Quitting (on error).
> Error: The network file 'circular.net.xml' is not accessible.
> Quitting (on error).
> Error: File 'circular.net.xml.gz' is not accessible (No such file or directory).
> Quitting (on error).
---------- Differences in output ----------
3d2
< Success.
6d4
< Success.
8d5
< Success.

TEST FAILED on ts-sim-build-ba : sumo extended rerouter ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,15
> Error: no declaration found for element 'nodes'
>  In file 'input_nodes.nod.xml'
>  At line/column 2/132.
> 
> Error: No nodes loaded.
> Quitting (on error).
> Error: File 'three_split.net.xml' is not accessible (No such file or directory).
> Quitting (on error).
> Traceback (most recent call last):
>   File "/home/delphi/gcc/sumo/tests/../tests/complex/sumo/extended/rerouter/runner.py", line 178, in <module>
>     "vehroutes.xml", ["vehicle"], {'route': ['exitTimes', 'edges']}))
>   File "/home/delphi/gcc/sumo/tests/../tests/complex/sumo/extended/rerouter/../../../../../tools/sumolib/xml.py", line 245, in parse
>     for _, parsenode in ET.iterparse(_open(xmlfile, None)):
>   File "<string>", line 70, in __init__
> IOError: [Errno 2] No such file or directory: 'vehroutes.xml'
---------- Differences in output ----------
3d2
< Success.
9,264d7
<      Checking with embedded rerouter definition: False
<     Checking with multi-referenced routes: False
<      Checking with embedded rerouter definition: True
<      Checking with embedded rerouter definition: False
<   Checking for simulation begin=0, rerouter starts at 100, ends at 86400
<     Checking with multi-referenced routes: True
<      Checking with embedded rerouter definition: True
<      Checking with embedded rerouter definition: False
<     Checking with multi-referenced routes: False
<      Checking with embedded rerouter definition: True
<      Checking with embedded rerouter definition: False
<   Checking for simulation begin=100, rerouter starts at 0, ends at 86400
<     Checking with multi-referenced routes: True
<      Checking with embedded rerouter definition: True
<      Checking with embedded rerouter definition: False
<     Checking with multi-referenced routes: False
<      Checking with embedded rerouter definition: True
<      Checking with embedded rerouter definition: False
<   Checking for simulation begin=0, rerouter starts at 50, ends at 100
<     Checking with multi-referenced routes: True
<      Checking with embedded rerouter definition: True
<      Checking with embedded rerouter definition: False
<     Checking with multi-referenced routes: False
<      Checking with embedded rerouter definition: True
<      Checking with embedded rerouter definition: False
<   Checking for simulation begin=50, rerouter starts at 50, ends at 100
<     Checking with multi-referenced routes: True
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : sumo lane_change best_lanes ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,11
> Error: no declaration found for element 'nodes'
>  In file '/home/delphi/gcc/sumo/tests/../tests/complex/sumo/lane_change/best_lanes/data/acosta_busStopNeedsChange#1/input_nodes.nod.xml'
>  At line/column 2/132.
> 
> Error: No nodes loaded.
> Quitting (on error).
> Error: File 'input_net.net.xml' is not accessible (No such file or directory).
> Quitting (on error).
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
---------- Differences in output ----------
2d1
< Success.
4,103d2
< lane -1000+0.-500+0_0:
<   length: 1953.6
<   offset: 0
<   allowsContinuation: True
<   over: ('-1000+0.-500+0_0', '-500+0.+0+0_1', '+0+0.+500+0_1', '+500+0.+1000+0_1')
< lane 0 ok
< ----------------------------------------------------------------------
< 
< -- Test: acosta_busStopNeedsChange#2
< Success.
< Loading configuration ... done.
< lane -500+0.+0+0_0:
<   length: 479.2
<   offset: 1
<   allowsContinuation: False
<   over: ('-500+0.+0+0_0',)
< lane -500+0.+0+0_1:
<   length: 1457.6
<   offset: 0
<   allowsContinuation: True
<   over: ('-500+0.+0+0_1', '+0+0.+500+0_1', '+500+0.+1000+0_1')
< lane -500+0.+0+0_2:
<   length: 479.2
<   offset: -1
<   allowsContinuation: False
<   over: ('-500+0.+0+0_2',)
< lane 0 ok
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : sumo meso segment_length ( Last six runs Aug2020 )

---------- Differences in errors ----------
1,18d0
< Warning: Teleporting vehicle 'flow_0.290'; waited too long, from edge 'D3E3':3 to edge 'E3E4':2, time 1942.70.
< Warning: Teleporting vehicle 'flow_0.1327'; waited too long, from edge 'D1D2':3, time 3149.99.
< Warning: Vehicle 'flow_0.1327' ends teleporting on edge 'E2E3':2, time 3184.95.
< Warning: Teleporting vehicle 'flow_0.1253'; waited too long, from edge 'C2D2':2, time 3350.35.
< Warning: Teleporting vehicle 'flow_0.1177'; waited too long, from edge 'C2D2':3 to edge 'D2E2':1, time 3369.50.
< Warning: Vehicle 'flow_0.1253' teleports beyond arrival edge 'E3E4', time 3455.23.
< Warning: Teleporting vehicle 'flow_0.290'; waited too long, from edge 'D3E3':3 to edge 'E3E4':2, time 1942.70.
< Warning: Teleporting vehicle 'flow_0.1327'; waited too long, from edge 'D1D2':3, time 3149.99.
< Warning: Vehicle 'flow_0.1327' ends teleporting on edge 'E2E3':2, time 3184.95.
< Warning: Teleporting vehicle 'flow_0.1253'; waited too long, from edge 'C2D2':2, time 3350.35.
< Warning: Teleporting vehicle 'flow_0.1177'; waited too long, from edge 'C2D2':3 to edge 'D2E2':1, time 3369.50.
< Warning: Vehicle 'flow_0.1253' teleports beyond arrival edge 'E3E4', time 3455.23.
< Warning: Teleporting vehicle 'flow_0.290'; waited too long, from edge 'D3E3':3 to edge 'E3E4':2, time 1942.70.
< Warning: Teleporting vehicle 'flow_0.1327'; waited too long, from edge 'D1D2':3, time 3149.99.
< Warning: Vehicle 'flow_0.1327' ends teleporting on edge 'E2E3':2, time 3184.95.
< Warning: Teleporting vehicle 'flow_0.1253'; waited too long, from edge 'C2D2':2, time 3350.35.
< Warning: Teleporting vehicle 'flow_0.1177'; waited too long, from edge 'C2D2':3 to edge 'D2E2':1, time 3369.50.
< Warning: Vehicle 'flow_0.1253' teleports beyond arrival edge 'E3E4', time 3455.23.
25,26d6
< Warning: Teleporting vehicle 'flow_0.569'; waited too long, from edge 'D2D3':2, time 2145.24.
< Warning: Vehicle 'flow_0.569' teleports beyond arrival edge 'E3E4', time 2215.16.
28a9,12
> Warning: Teleporting vehicle 'flow_0.1113'; waited too long, from edge 'C2D2':2, time 2764.47.
> Warning: Vehicle 'flow_0.1113' ends teleporting on edge 'D3D4':0, time 2799.43.
> Warning: Teleporting vehicle 'flow_0.1425'; waited too long, from edge 'D2E2':2, time 3374.74.
> Warning: Vehicle 'flow_0.1425' ends teleporting on edge 'E3E4':1, time 3409.70.
35,36d18
< Warning: Teleporting vehicle 'flow_0.569'; waited too long, from edge 'D2D3':2, time 2145.24.
< Warning: Vehicle 'flow_0.569' teleports beyond arrival edge 'E3E4', time 2215.16.
<truncated after showing first 30 lines>
---------- Differences in output ----------
4,8c4,8
< Durations with junction control int.net.xml: count 19, min 302.70 (10), max 481.33 (140), mean 402.60 Q1 324.87, median 387.45, Q3 481.33
< Deviation int.net.xml meso vs. micro: 0.268959541746
< Deviation int.net.xml meso jc vs. micro: 0.0674865821079
< Durations noint.net.xml: count 19, min 309.99 (100), max 311.31 (120), mean 310.75 Q1 310.24, median 310.72, Q3 311.18
< Durations with junction control noint.net.xml: count 19, min 311.62 (10), max 473.85 (150), mean 399.04 Q1 337.87, median 408.87, Q3 473.85
---
> Durations with junction control int.net.xml: count 19, min 302.70 (10), max 500.62 (140), mean 408.19 Q1 325.72, median 399.70, Q3 500.62
> Deviation int.net.xml meso vs. micro: 0.271920993336
> Deviation int.net.xml meso jc vs. micro: 0.0419003787334
> Durations noint.net.xml: count 19, min 309.99 (100), max 316.32 (150), mean 312.15 Q1 310.49, median 310.72, Q3 316.32
> Durations with junction control noint.net.xml: count 19, min 311.62 (10), max 438.37 (150), mean 386.77 Q1 334.71, median 402.22, Q3 438.37
10c10
< Deviation noint.net.xml meso jc vs. micro: -0.0347733657277
---
> Deviation noint.net.xml meso jc vs. micro: -0.0179434616455

TEST FAILED on ts-sim-build-ba : sumo ringNoBrake ( Last six runs Aug2020 )

---------- Differences in errors ----------
1,7c1,11
< Warning: Starting TraCI without using internal lanes!
< Vehicles will jump over junctions.
< Use without option --no-internal-links to avoid unexpected behavior
< Warning: Network contains internal links but option --no-internal-links is set. Vehicles will 'jump' across junctions and thus underestimate route lengths and travel times.
< Warning: Starting TraCI without using internal lanes!
< Vehicles will jump over junctions.
< Use without option --no-internal-links to avoid unexpected behavior
---
> Error: no declaration found for element 'nodes'
>  In file 'input_nodes.nod.xml'
>  At line/column 3/132.
> 
> Error: No nodes loaded.
> Quitting (on error).
> Error: File 'circular.net.xml' is not accessible (No such file or directory).
> Quitting (on error).
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
---------- Differences in output ----------
3d2
< Success.
6,15d4
< Loading configuration ... done.
< >>> Checking Simulation (network: internal, simulation: no internal)
< 
< >>> Building the network (without internal)
< Loading configuration ... done.
< Success.
< Loading configuration ... done.
< >>> Checking Simulation (network: no internal, simulation: internal)
< Loading configuration ... done.
< >>> Checking Simulation (network: no internal, simulation: no internal)

TEST FAILED on ts-sim-build-ba : traas webservice ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,65
> WARNUNG: Using deprecated META-INF/services mechanism with non-standard property: javax.xml.soap.MetaFactory. Property javax.xml.soap.SAAJMetaFactory should be used instead.
> WARNUNG: Using deprecated META-INF/services mechanism with non-standard property: javax.xml.soap.MetaFactory. Property javax.xml.soap.SAAJMetaFactory should be used instead.
> WARNUNG: Using deprecated META-INF/services mechanism with non-standard property: javax.xml.soap.MetaFactory. Property javax.xml.soap.SAAJMetaFactory should be used instead.
> WARNUNG: Using deprecated META-INF/services mechanism with non-standard property: javax.xml.soap.MetaFactory. Property javax.xml.soap.SAAJMetaFactory should be used instead.
> WARNUNG: Using deprecated META-INF/services mechanism with non-standard property: javax.xml.soap.MetaFactory. Property javax.xml.soap.SAAJMetaFactory should be used instead.
> WARNUNG: Using deprecated META-INF/services mechanism with non-standard property: javax.xml.soap.MetaFactory. Property javax.xml.soap.SAAJMetaFactory should be used instead.
> WARNUNG: Using deprecated META-INF/services mechanism with non-standard property: javax.xml.soap.MetaFactory. Property javax.xml.soap.SAAJMetaFactory should be used instead.
> WARNUNG: Using deprecated META-INF/services mechanism with non-standard property: javax.xml.soap.MetaFactory. Property javax.xml.soap.SAAJMetaFactory should be used instead.
> Aug. 08, 2020 12:28:59 VORM. com.sun.xml.ws.server.sei.TieHandler createResponse
> SCHWERWIEGEND: null
> java.lang.NullPointerException
> 	at de.tudresden.sumo.util.Sumo.start_ws(Sumo.java:143)
> 	at de.tudresden.ws.ServiceImpl.start(ServiceImpl.java:69)
> 	at java.base/jdk.internal.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> 	at java.base/jdk.internal.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
> 	at java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
> 	at java.base/java.lang.reflect.Method.invoke(Method.java:566)
> 	at com.sun.xml.ws.util.Trampoline.invoke(MethodUtil.java:82)
> 	at java.base/jdk.internal.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> 	at java.base/jdk.internal.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
> 	at java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
> 	at java.base/java.lang.reflect.Method.invoke(Method.java:566)
> 	at com.sun.xml.ws.util.MethodUtil.invoke(MethodUtil.java:107)
> 	at com.sun.xml.ws.api.server.MethodUtil.invoke(MethodUtil.java:64)
> 	at com.sun.xml.ws.api.server.InstanceResolver$1.invoke(InstanceResolver.java:250)
> 	at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:149)
> 	at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:88)
> 	at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:1136)
> 	at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:1050)
<truncated after showing first 30 lines>
---------- Differences in output ----------
6c6
< Die WSDL und die zugehrigen Metadaten werden heruntergeladen
---
> Die WSDL und die zugehörigen Metadaten werden heruntergeladen

TEST FAILED on ts-sim-build-ba : traci bugs ticket3505 ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,9
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 30/181.
> 
> Quitting (on error).
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
> malloc_consolidate(): invalid chunk size
---------- Differences in output ----------
5d4
< 300
---------- Differences in vehroutes ----------
5,16d4
<     <vehicle id="veh0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="261.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="veh1" type="t1" depart="10.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="263.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="veh2" type="t2" depart="20.00" departPos="100.00" departSpeed="10.00" speedFactor="1.01" arrival="266.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 

TEST FAILED on ts-sim-build-ba : traci bugs ticket3505_test_with_begin_ge_savetime ( Last six runs Aug2020 )

---------- Differences in errors ----------
1c1,8
< Warning: State was written at a different time 50.00 than the begin time 60!
---
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 30/181.
> 
> Quitting (on error).
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
---------- Differences in output ----------
5d4
< 300
---------- Differences in vehroutes ----------
5,16d4
<     <vehicle id="veh0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="261.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="veh1" type="t1" depart="10.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="263.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="veh2" type="t2" depart="20.00" departPos="100.00" departSpeed="10.00" speedFactor="1.01" arrival="266.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 

TEST FAILED on ts-sim-build-ba : traci bugs ticket3505_with_load_offset ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,9
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 30/181.
> 
> Quitting (on error).
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
> malloc_consolidate(): invalid chunk size
---------- Differences in output ----------
5d4
< 300.0
---------- Differences in vehroutes ----------
5,16d4
<     <vehicle id="veh0" type="DEFAULT_VEHTYPE" depart="100.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="261.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="veh1" type="t1" depart="110.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="263.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="veh2" type="t2" depart="120.00" departPos="100.00" departSpeed="10.00" speedFactor="1.01" arrival="266.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 

TEST FAILED on ts-sim-build-ba : traci bugs ticket3522 ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,9
> Error: no declaration found for element 'snapshot'
>  In file 'state.xml'
>  At line/column 30/181.
> 
> Quitting (on error).
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
> malloc_consolidate(): invalid chunk size
---------- Differences in output ----------
18,34d17
< Get after load....
< vtype
< 1.0 == 1.0
< 1.0 == 1.0
< 2.0 == 2.0
< 3.0 == 3.0
< 6.0 == 6.0
< 7.0 == 7.0
< 1.3 == 1.3
< vehicle
< 1.0 == 1.0
< 1.0 == 1.0
< 2.0 == 2.0
< 3.0 == 3.0
< 6.0 == 6.0
< 7.0 == 7.0
< 1.3 == 1.3
---------- Differences in vehroutes ----------
5,16d4
<     <vehicle id="veh0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="270.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="veh1" type="t1" depart="10.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="276.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="veh2" type="t2@veh2" depart="20.00" departPos="100.00" departSpeed="10.00" speedFactor="1.01" arrival="282.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 

TEST FAILED on ts-sim-build-ba : traci connection clientCloses sumo ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,8
> Error: no character data is allowed by content model
>  In file 'input_routes.rou.xml'
>  At line/column 3/4.
> 
> Quitting (on error).
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
---------- Differences in output ----------
4,21d3
< Print ended at step 100
< ----------- SUMO end time is not given -----------
< Loading configuration ... done.
< Print ended at step 100
< =========== empty routes in SUMO ===========
< ----------- SUMO end time is smaller than TraCI's -----------
< Loading configuration ... done.
< Print ended at step 100
< ----------- SUMO end time is not given -----------
< Loading configuration ... done.
< Print ended at step 100
< =========== vehicle leaves before TraCI ends ===========
< ----------- SUMO end time is smaller than TraCI's -----------
< Loading configuration ... done.
< Print ended at step 100
< ----------- SUMO end time is not given -----------
< Loading configuration ... done.
< Print ended at step 100

TEST FAILED on ts-sim-build-ba : traci connection clientCloses sumo-gui ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,3
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
---------- Differences in output ----------
4,21d3
< Print ended at step 100
< ----------- SUMO end time is not given -----------
< Loading configuration ... done.
< Print ended at step 100
< =========== empty routes in SUMO ===========
< ----------- SUMO end time is smaller than TraCI's -----------
< Loading configuration ... done.
< Print ended at step 100
< ----------- SUMO end time is not given -----------
< Loading configuration ... done.
< Print ended at step 100
< =========== vehicle leaves before TraCI ends ===========
< ----------- SUMO end time is smaller than TraCI's -----------
< Loading configuration ... done.
< Print ended at step 100
< ----------- SUMO end time is not given -----------
< Loading configuration ... done.
< Print ended at step 100

2 TESTS FAILED on ts-sim-build-ba :

---------- Differences in errors ----------
0a1,8
> Error: attribute 'speeFactor' is not declared for element 'vType'
>  In file 'input_routes.rou.xml'
>  At line/column 5/69.
> 
> Quitting (on error).
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
---------- Differences in output ----------
1,99d0
< findIntermodalRoute modes='car bicycle public' vType=' pType=''
<   Stage(type=3, vType=DEFAULT_VEHTYPE, line=car, edges=('A0B0', 'B0B1', 'B1A1', 'A1B1'), travelTime=126.216342693, cost=126.216342693, length=3571.04, intended=car, depart=1.0, departPos=894.8, arrivalPos=987.6)
< 
< findIntermodalRoute modes='car bicycle public' vType=defaultCar' pType=''
<   Stage(type=3, vType=defaultCar, line=defaultCar, edges=('A0B0', 'B0B1', 'B1A1', 'A1B1'), travelTime=126.216342693, cost=126.216342693, length=3571.04, intended=defaultCar, depart=1.0, departPos=894.8, arrivalPos=987.6)
< 
< findIntermodalRoute modes='car bicycle public' vType=slowCar' pType=''
<   Stage(type=3, vType=DEFAULT_VEHTYPE, line=car, edges=('A0B0', 'B0B1', 'B1A1', 'A1B1'), travelTime=126.216342693, cost=126.216342693, length=3571.04, intended=car, depart=1.0, departPos=894.8, arrivalPos=987.6)
< 
< findIntermodalRoute modes='car bicycle public' vType=slowCarFactor' pType=''
<   Stage(type=3, vType=DEFAULT_VEHTYPE, line=car, edges=('A0B0', 'B0B1', 'B1A1', 'A1B1'), travelTime=126.216342693, cost=126.216342693, length=3571.04, intended=car, depart=1.0, departPos=894.8, arrivalPos=987.6)
< 
< findIntermodalRoute modes='car bicycle public' vType=fastCar' pType=''
<   Stage(type=3, vType=fastCar, line=fastCar, edges=('A0B0', 'B0B1', 'B1A1', 'A1B1'), travelTime=65.3581713463, cost=65.3581713463, length=3571.04, intended=fastCar, depart=1.0, departPos=894.8, arrivalPos=987.6)
< 
< 
< 
< findIntermodalRoute modes='public' vType=' pType=''
<   Stage(type=2, destStop=stopC_W, edges=('A0B0', 'accessC'), travelTime=181.27776, cost=181.27776, length=2194.03, depart=1.0, departPos=894.8, arrivalPos=91.9)
<   Stage(type=3, line=train2:1, destStop=stopA_W, edges=('railEW',), travelTime=559.72296, cost=559.72296, length=2392.8, intended=train_train2:1.0, depart=599.0, departPos=0.0, arrivalPos=1100.0)
<   Stage(type=2, destStop=stopA_N, edges=('accessA',), travelTime=3.80256, cost=3.80256, length=1603.96, depart=742.00072, departPos=86.23, arrivalPos=90.19)
<   Stage(type=3, line=train1:0, destStop=stopB_N, edges=('railSN',), travelTime=355.19796, cost=355.19796, length=1192.8, intended=train_train1:0.1, depart=1001.0, departPos=0.0, arrivalPos=500.0)
<   Stage(type=2, edges=('accessB', 'A1B1'), travelTime=203.9232, cost=203.9232, length=2087.62, depart=1101.00124, departPos=91.16, arrivalPos=987.6)
< 
< findIntermodalRoute modes='public' vType=defaultCar' pType=''
<   Stage(type=3, vType=defaultCar, line=defaultCar, edges=('A0B0', 'B0B1', 'B1A1', 'A1B1'), travelTime=126.216342693, cost=126.216342693, length=3571.04, intended=defaultCar, depart=1.0, departPos=894.8, arrivalPos=987.6)
< 
< findIntermodalRoute modes='public' vType=slowCar' pType=''
<   Stage(type=2, destStop=stopC_W, edges=('A0B0', 'accessC'), travelTime=181.27776, cost=181.27776, length=2194.03, depart=1.0, departPos=894.8, arrivalPos=91.9)
<truncated after showing first 30 lines>
traci misc rerouting findIntermodalRoute car_public_speedFactor ( Last six runs Aug2020 )
traci misc rerouting findIntermodalRoute car_public_speedFactor_routingMode ( Last six runs Aug2020 )

TEST FAILED on ts-sim-build-ba : traci simulation loadState busStop ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,23
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 21/181.
> 
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 21/181.
> 
> Error: Answered with error to command 0xab: Loading state from 'input_state.xml' failed.
> Traceback (most recent call last):
>   File "/home/delphi/gcc/sumo/tests/../tests/complex/traci/simulation/loadState/busStop/runner.py", line 40, in <module>
>     traci.simulation.loadState("input_state.xml")
>   File "/home/delphi/gcc/sumo/tools/traci/_simulation.py", line 430, in loadState
>     self._setCmd(tc.CMD_LOAD_SIMSTATE, "", "s", fileName)
>   File "/home/delphi/gcc/sumo/tools/traci/domain.py", line 184, in _setCmd
>     self._connection._sendCmd(self._cmdSetID, varID, objectID, format, *values)
>   File "/home/delphi/gcc/sumo/tools/traci/connection.py", line 178, in _sendCmd
>     return self._sendExact()
>   File "/home/delphi/gcc/sumo/tools/traci/connection.py", line 95, in _sendExact
>     raise TraCIException(err, prefix[1], _RESULTS[prefix[2]])
> traci.exceptions.TraCIException: Loading state from 'input_state.xml' failed.
> Error: tcpip::Socket::recvAndCheck @ recv: peer shutdown
> Quitting (on error).
---------- Differences in tripinfo ----------
5,14d4
<     <tripinfo id="1" depart="60.00" departLane="WC_0" departPos="5.10" departSpeed="0.00" departDelay="0.00" arrival="94.00" arrivalLane="CE_1" arrivalPos="91.95" arrivalSpeed="8.25" duration="34.00" routeLength="194.90" waitingTime="1.00" waitingCount="1" stopTime="10.00" timeLoss="8.88" rerouteNo="1" devices="tripinfo_1 routing_1" vType="DEFAULT_VEHTYPE" speedFactor="0.94" vaporized=""/>
<     <tripinfo id="1" depart="60.00" departLane="WC_0" departPos="5.10" departSpeed="0.00" departDelay="0.00" arrival="95.00" arrivalLane="CE_1" arrivalPos="91.95" arrivalSpeed="10.19" duration="35.00" routeLength="194.90" waitingTime="1.00" waitingCount="1" stopTime="10.00" timeLoss="9.37" rerouteNo="1" devices="tripinfo_1 routing_1" vType="DEFAULT_VEHTYPE" speedFactor="0.94" vaporized=""/>
<     <tripinfo id="1" depart="60.00" departLane="WC_0" departPos="5.10" departSpeed="0.00" departDelay="0.00" arrival="96.00" arrivalLane="CE_1" arrivalPos="91.95" arrivalSpeed="8.73" duration="36.00" routeLength="194.90" waitingTime="1.00" waitingCount="1" stopTime="10.00" timeLoss="10.51" rerouteNo="1" devices="tripinfo_1 routing_1" vType="DEFAULT_VEHTYPE" speedFactor="0.94" vaporized=""/>
<     <tripinfo id="1" depart="60.00" departLane="WC_0" departPos="5.10" departSpeed="0.00" departDelay="0.00" arrival="96.00" arrivalLane="CE_1" arrivalPos="91.95" arrivalSpeed="9.38" duration="36.00" routeLength="194.90" waitingTime="2.00" waitingCount="1" stopTime="10.00" timeLoss="10.46" rerouteNo="1" devices="tripinfo_1 routing_1" vType="DEFAULT_VEHTYPE" speedFactor="0.94" vaporized=""/>
<     <tripinfo id="1" depart="60.00" departLane="WC_0" departPos="5.10" departSpeed="0.00" departDelay="0.00" arrival="96.00" arrivalLane="CE_1" arrivalPos="91.95" arrivalSpeed="8.74" duration="36.00" routeLength="194.90" waitingTime="1.00" waitingCount="1" stopTime="10.00" timeLoss="10.47" rerouteNo="1" devices="tripinfo_1 routing_1" vType="DEFAULT_VEHTYPE" speedFactor="0.94" vaporized=""/>
<     <tripinfo id="1" depart="60.00" departLane="WC_0" departPos="5.10" departSpeed="0.00" departDelay="0.00" arrival="95.00" arrivalLane="CE_1" arrivalPos="91.95" arrivalSpeed="8.93" duration="35.00" routeLength="194.90" waitingTime="1.00" waitingCount="1" stopTime="10.00" timeLoss="9.76" rerouteNo="1" devices="tripinfo_1 routing_1" vType="DEFAULT_VEHTYPE" speedFactor="0.94" vaporized=""/>
<     <tripinfo id="1" depart="60.00" departLane="WC_0" departPos="5.10" departSpeed="0.00" departDelay="0.00" arrival="94.00" arrivalLane="CE_1" arrivalPos="91.95" arrivalSpeed="7.86" duration="34.00" routeLength="194.90" waitingTime="1.00" waitingCount="1" stopTime="10.00" timeLoss="8.92" rerouteNo="1" devices="tripinfo_1 routing_1" vType="DEFAULT_VEHTYPE" speedFactor="0.94" vaporized=""/>
<     <tripinfo id="1" depart="60.00" departLane="WC_0" departPos="5.10" departSpeed="0.00" departDelay="0.00" arrival="95.00" arrivalLane="CE_1" arrivalPos="91.95" arrivalSpeed="8.55" duration="35.00" routeLength="194.90" waitingTime="1.00" waitingCount="1" stopTime="10.00" timeLoss="9.48" rerouteNo="1" devices="tripinfo_1 routing_1" vType="DEFAULT_VEHTYPE" speedFactor="0.94" vaporized=""/>
<     <tripinfo id="1" depart="60.00" departLane="WC_0" departPos="5.10" departSpeed="0.00" departDelay="0.00" arrival="94.00" arrivalLane="CE_1" arrivalPos="91.95" arrivalSpeed="8.66" duration="34.00" routeLength="194.90" waitingTime="1.00" waitingCount="1" stopTime="10.00" timeLoss="8.96" rerouteNo="1" devices="tripinfo_1 routing_1" vType="DEFAULT_VEHTYPE" speedFactor="0.94" vaporized=""/>
<     <tripinfo id="1" depart="60.00" departLane="WC_0" departPos="5.10" departSpeed="0.00" departDelay="0.00" arrival="94.00" arrivalLane="CE_1" arrivalPos="91.95" arrivalSpeed="7.58" duration="34.00" routeLength="194.90" waitingTime="1.00" waitingCount="1" stopTime="10.00" timeLoss="9.07" rerouteNo="1" devices="tripinfo_1 routing_1" vType="DEFAULT_VEHTYPE" speedFactor="0.94" vaporized=""/>

TEST FAILED on ts-sim-build-ba : traci simulation loadState detectors ( Last six runs Aug2020 )

---------- Differences in detector ----------
5,7d4
<     <interval begin="0.00" end="11.00" id="d1" nVehContrib="1" flow="327.27" occupancy="3.67" speed="12.37" harmonicMeanSpeed="12.37" length="5.00" nVehEntered="1"/>
<    <interval begin="0.00" end="11.00" id="d2" sampledSeconds="4.96" nVehEntered="1" nVehLeft="1" nVehSeen="1" meanSpeed="11.08" meanTimeLoss="1.23" meanOccupancy="3.42" maxOccupancy="10.00" meanMaxJamLengthInVehicles="0.00" meanMaxJamLengthInMeters="0.00" maxJamLengthInVehicles="0" maxJamLengthInMeters="0.00" jamLengthInVehiclesSum="0" jamLengthInMetersSum="0.00" meanHaltingDuration="0.00" maxHaltingDuration="0.00" haltingDurationSum="0.00" meanIntervalHaltingDuration="0.00" maxIntervalHalting
Duration="0.00" intervalHaltingDurationSum="0.00" startedHalts="0.00" meanVehicleNumber="0.50" maxVehicleNumber="1" />
<    <interval begin="0.00" end="11.00" id="d3" meanTravelTime="4.93" meanOverlapTravelTime="5.46" meanSpeed="10.66" meanHaltsPerVehicle="0.00" meanTimeLoss="0.70" vehicleSum="1" meanSpeedWithin="-1.00" meanHaltsPerVehicleWithin="-1.00" meanDurationWithin="-1.00" vehicleSumWithin="0" meanIntervalSpeedWithin="-1.00" meanIntervalHaltsPerVehicleWithin="-1.00" meanIntervalDurationWithin="-1.00" meanTimeLossWithin="-1.00"/>
---------- Differences in errors ----------
0a1,23
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 20/180.
> 
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 20/180.
> 
> Error: Answered with error to command 0xab: Loading state from 'input_state.xml' failed.
> Traceback (most recent call last):
>   File "/home/delphi/gcc/sumo/tests/../tests/complex/traci/simulation/loadState/detectors/runner.py", line 40, in <module>
>     traci.simulation.loadState("input_state.xml")
>   File "/home/delphi/gcc/sumo/tools/traci/_simulation.py", line 430, in loadState
>     self._setCmd(tc.CMD_LOAD_SIMSTATE, "", "s", fileName)
>   File "/home/delphi/gcc/sumo/tools/traci/domain.py", line 184, in _setCmd
>     self._connection._sendCmd(self._cmdSetID, varID, objectID, format, *values)
>   File "/home/delphi/gcc/sumo/tools/traci/connection.py", line 178, in _sendCmd
>     return self._sendExact()
>   File "/home/delphi/gcc/sumo/tools/traci/connection.py", line 95, in _sendExact
>     raise TraCIException(err, prefix[1], _RESULTS[prefix[2]])
> traci.exceptions.TraCIException: Loading state from 'input_state.xml' failed.
> Error: tcpip::Socket::recvAndCheck @ recv: peer shutdown
> Quitting (on error).
---------- Differences in output ----------
1,120d0
< i=0 time=2.0 det=d1 count=0 ids=()
< i=0 time=2.0 det=d2 count=0 ids=()
< i=0 time=2.0 det=d3 count=0 ids=()
< i=0 time=3.0 det=d1 count=0 ids=()
< i=0 time=3.0 det=d2 count=0 ids=()
< i=0 time=3.0 det=d3 count=0 ids=()
< i=0 time=4.0 det=d1 count=0 ids=()
< i=0 time=4.0 det=d2 count=0 ids=()
< i=0 time=4.0 det=d3 count=0 ids=()
< i=0 time=5.0 det=d1 count=0 ids=()
< i=0 time=5.0 det=d2 count=0 ids=()
< i=0 time=5.0 det=d3 count=0 ids=()
< i=0 time=6.0 det=d1 count=0 ids=()
< i=0 time=6.0 det=d2 count=1 ids=('0',)
< i=0 time=6.0 det=d3 count=1 ids=('1',)
< i=0 time=7.0 det=d1 count=0 ids=()
< i=0 time=7.0 det=d2 count=1 ids=('0',)
< i=0 time=7.0 det=d3 count=1 ids=('1',)
< i=0 time=8.0 det=d1 count=1 ids=('1',)
< i=0 time=8.0 det=d2 count=1 ids=('0',)
< i=0 time=8.0 det=d3 count=1 ids=('1',)
< i=0 time=9.0 det=d1 count=1 ids=('1',)
< i=0 time=9.0 det=d2 count=1 ids=('0',)
< i=0 time=9.0 det=d3 count=1 ids=('1',)
< i=0 time=10.0 det=d1 count=0 ids=()
< i=0 time=10.0 det=d2 count=1 ids=('0',)
< i=0 time=10.0 det=d3 count=1 ids=('1',)
< i=0 time=11.0 det=d1 count=0 ids=()
< i=0 time=11.0 det=d2 count=0 ids=()
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : traci simulation loadState railSignal ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,23
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 24/181.
> 
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 24/181.
> 
> Error: Answered with error to command 0xab: Loading state from 'input_state.xml' failed.
> Traceback (most recent call last):
>   File "/home/delphi/gcc/sumo/tests/../tests/complex/traci/simulation/loadState/railSignal/runner.py", line 41, in <module>
>     traci.simulation.loadState('input_state.xml')
>   File "/home/delphi/gcc/sumo/tools/traci/_simulation.py", line 430, in loadState
>     self._setCmd(tc.CMD_LOAD_SIMSTATE, "", "s", fileName)
>   File "/home/delphi/gcc/sumo/tools/traci/domain.py", line 184, in _setCmd
>     self._connection._sendCmd(self._cmdSetID, varID, objectID, format, *values)
>   File "/home/delphi/gcc/sumo/tools/traci/connection.py", line 178, in _sendCmd
>     return self._sendExact()
>   File "/home/delphi/gcc/sumo/tools/traci/connection.py", line 95, in _sendExact
>     raise TraCIException(err, prefix[1], _RESULTS[prefix[2]])
> traci.exceptions.TraCIException: Loading state from 'input_state.xml' failed.
> Error: tcpip::Socket::recvAndCheck @ recv: peer shutdown
> Quitting (on error).
---------- Differences in tripinfo ----------
5,6d4
<     <tripinfo id="t0" depart="0.00" departLane="" departPos="45.10" departSpeed="-1.00" departDelay="0.00" arrival="57.00" arrivalLane="e_0" arrivalPos="100.00" arrivalSpeed="8.00" duration="57.00" routeLength="300.20" waitingTime="0.00" waitingCount="0" stopTime="0.00" timeLoss="0.00" rerouteNo="0" devices="tripinfo_t0" vType="train" speedFactor="1.00" vaporized=""/>
<     <tripinfo id="t1" depart="10.00" departLane="" departPos="45.10" departSpeed="-1.00" departDelay="0.00" arrival="92.00" arrivalLane="e_0" arrivalPos="100.00" arrivalSpeed="8.00" duration="82.00" routeLength="500.40" waitingTime="2.00" waitingCount="1" stopTime="0.00" timeLoss="17.50" rerouteNo="0" devices="tripinfo_t1" vType="train" speedFactor="1.00" vaporized=""/>

TEST FAILED on ts-sim-build-ba : traci simulation loadState repeat ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,23
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 24/181.
> 
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 24/181.
> 
> Error: Answered with error to command 0xab: Loading state from 'input_state.xml' failed.
> Traceback (most recent call last):
>   File "/home/delphi/gcc/sumo/tests/../tests/complex/traci/simulation/loadState/repeat/runner.py", line 37, in <module>
>     traci.simulation.loadState("input_state.xml")
>   File "/home/delphi/gcc/sumo/tools/traci/_simulation.py", line 430, in loadState
>     self._setCmd(tc.CMD_LOAD_SIMSTATE, "", "s", fileName)
>   File "/home/delphi/gcc/sumo/tools/traci/domain.py", line 184, in _setCmd
>     self._connection._sendCmd(self._cmdSetID, varID, objectID, format, *values)
>   File "/home/delphi/gcc/sumo/tools/traci/connection.py", line 178, in _sendCmd
>     return self._sendExact()
>   File "/home/delphi/gcc/sumo/tools/traci/connection.py", line 95, in _sendExact
>     raise TraCIException(err, prefix[1], _RESULTS[prefix[2]])
> traci.exceptions.TraCIException: Loading state from 'input_state.xml' failed.
> Error: tcpip::Socket::recvAndCheck @ recv: peer shutdown
> Quitting (on error).
---------- Differences in fcd ----------
5,106d4
<     <timestep time="50.00">
<         <vehicle id="trip_0" x="130.76" y="95.05" angle="90.00" type="DEFAULT_VEHTYPE" speed="11.01" pos="22.71" lane="CE_0" slope="0.00"/>
<     </timestep>
<     <timestep time="51.00">
<         <vehicle id="trip_0" x="143.96" y="95.05" angle="90.00" type="DEFAULT_VEHTYPE" speed="13.20" pos="35.91" lane="CE_0" slope="0.00"/>
<     </timestep>
<     <timestep time="52.00">
<         <vehicle id="trip_0" x="158.53" y="95.05" angle="90.00" type="DEFAULT_VEHTYPE" speed="14.57" pos="50.48" lane="CE_0" slope="0.00"/>
<     </timestep>
<     <timestep time="53.00">
<         <vehicle id="trip_0" x="172.63" y="95.05" angle="90.00" type="DEFAULT_VEHTYPE" speed="14.09" pos="64.58" lane="CE_0" slope="0.00"/>
<     </timestep>
<     <timestep time="54.00">
<         <vehicle id="trip_0" x="186.48" y="95.05" angle="90.00" type="DEFAULT_VEHTYPE" speed="13.85" pos="78.43" lane="CE_0" slope="0.00"/>
<     </timestep>
<     <timestep time="55.00"/>
<     <timestep time="56.00"/>
<     <timestep time="57.00"/>
<     <timestep time="58.00"/>
<     <timestep time="59.00"/>
<     <timestep time="50.00">
<         <vehicle id="trip_0" x="131.24" y="95.05" angle="90.00" type="DEFAULT_VEHTYPE" speed="11.49" pos="23.19" lane="CE_0" slope="0.00"/>
<     </timestep>
<     <timestep time="51.00">
<         <vehicle id="trip_0" x="144.97" y="95.05" angle="90.00" type="DEFAULT_VEHTYPE" speed="13.73" pos="36.92" lane="CE_0" slope="0.00"/>
<     </timestep>
<     <timestep time="52.00">
<         <vehicle id="trip_0" x="158.91" y="95.05" angle="90.00" type="DEFAULT_VEHTYPE" speed="13.94" pos="50.86" lane="CE_0" slope="0.00"/>
<     </timestep>
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : traci simulation loadState rerouting ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,9
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 20/183.
> 
> Quitting (on error).
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
> malloc_consolidate(): invalid chunk size
---------- Differences in output ----------
1,200d0
< 1001.0
< 1002.0
< 1003.0
< 1004.0
< 1005.0
< 1006.0
< 1007.0
< 1008.0
< 1009.0
< 1010.0
< 1011.0
< 1012.0
< 1013.0
< 1014.0
< 1015.0
< 1016.0
< 1017.0
< 1018.0
< 1019.0
< 1020.0
< 1021.0
< 1022.0
< 1023.0
< 1024.0
< 1025.0
< 1026.0
< 1027.0
< 1028.0
< 1029.0
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : traci vehicletype save_and_load_vtype_params ( Last six runs Aug2020 )

---------- Differences in errors ----------
4a5,13
> Error: no declaration found for element 'snapshot'
>  In file 'state.xml'
>  At line/column 42/181.
> 
> Quitting (on error).
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
> malloc_consolidate(): invalid chunk size
---------- Differences in output ----------
16,30d15
< Get after load....
< vtype
< 4.0 == 4.0
< 0.8 == 0.8
< 0.9 == 0.9
< 3.3 == 3.3
< 99.9 == 99.9
< 1.5 ==1.5
< vehicle
< 4.0 == 4.0
< 0.8 == 0.8
< 0.9 == 0.9
< 3.3 == 3.3
< 99.9 == 99.9
< 1.5 ==1.5
---------- Differences in vehroutes ----------
5,16d4
<     <vehicle id="veh0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="261.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="veh1" type="t1" depart="10.00" departPos="100.00" departSpeed="10.00" speedFactor="1.00" arrival="266.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="veh2" type="t2@veh2" depart="20.00" departPos="100.00" departSpeed="10.00" speedFactor="0.90" arrival="275.50">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 

TEST FAILED on ts-sim-build-ba : tutorial circles ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,5
> Error: attribute 'type' is not declared for element 'vType'
>  In file 'data/circles.rou.xml'
>  At line/column 3/86.
> 
> Quitting (on error).
---------- Differences in output ----------
2c2
< >> Simulation closed with status 0
---
> >> Simulation closed with status 1

TEST FAILED on ts-sim-build-ba : tutorial city_mobil ( Last six runs Aug2020 )

---------- Differences in output ----------
20c20
< ('footmainout', 'footmain7to8') True True False
---
> ('footmainout', 'footmain7to8') True True True
38c38
< ('footmainout', 'footmain7to8') True True False
---
> ('footmainout', 'footmain7to8') True True True

TEST FAILED on ts-sim-build-ba : tutorial hello ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,6
> Error: no declaration found for element 'nodes'
>  In file 'data/hello.nod.xml'
>  At line/column 3/132.
> 
> Error: No nodes loaded.
> Quitting (on error).
---------- Differences in net ----------
4c4
< <net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">
---
> <net version="0.13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">
9c9
<         <lane id=":2_0_0" index="0" speed="13.89" length="0.10" shape="500.00,-1.60 500.00,-1.60"/>
---
>         <lane id=":2_0_0" index="0" speed="13.90" length="0.10" shape="500.00,-1.65 500.00,-1.65"/>
13c13
<         <lane id="1to2_0" index="0" speed="13.89" length="500.00" shape="0.00,-1.60 500.00,-1.60"/>
---
>         <lane id="1to2_0" index="0" speed="13.90" length="500.00" shape="0.00,-1.65 500.00,-1.65"/>
16c16
<         <lane id="out_0" index="0" speed="13.89" length="1.00" shape="500.00,-1.60 501.00,-1.60"/>
---
>         <lane id="out_0" index="0" speed="13.90" length="1.00" shape="500.00,-1.65 501.00,-1.65"/>
19,20c19,20
<     <junction id="1" type="dead_end" x="0.00" y="0.00" incLanes="" intLanes="" shape="0.00,0.00 0.00,-3.20"/>
<     <junction id="2" type="priority" x="500.00" y="0.00" incLanes="1to2_0" intLanes=":2_0_0" shape="500.00,0.00 500.00,-3.20 500.00,0.00">
---
>     <junction id="1" type="unregulated" x="0.00" y="0.00" incLanes="" intLanes="" shape="-0.00,-0.05 -0.00,-3.25"/>
>     <junction id="2" type="priority" x="500.00" y="0.00" incLanes="1to2_0" intLanes=":2_0_0" shape="500.00,-0.05 500.00,-3.25 500.00,-0.05">
23c23
<     <junction id="3" type="dead_end" x="501.00" y="0.00" incLanes="out_0" intLanes="" shape="501.00,-3.20 501.00,0.00"/>
---
>     <junction id="3" type="unregulated" x="501.00" y="0.00" incLanes="out_0" intLanes="" shape="501.00,-3.25 501.00,-0.05"/>
---------- Differences in output ----------
3,43c3,4
< Parsing edges from (FILE)
<  Import done:
<    3 nodes loaded.
<    2 edges loaded.
< Removing self-loops ... done ((TIME)).
< Removing empty nodes ... done ((TIME)).
<    0 nodes removed.
< Moving network to origin ... done ((TIME)).
< Computing turning directions ... done ((TIME)).
< Assigning nodes to traffic lights ... done ((TIME)).
< Sorting nodes' edges ... done ((TIME)).
< Computing node shapes ... done ((TIME)).
< Computing edge shapes ... done ((TIME)).
< Computing node types ... done ((TIME)).
< Computing priorities ... done ((TIME)).
< Computing approached edges ... done ((TIME)).
< Guessing and setting roundabouts ... done ((TIME)).
< Computing approaching lanes ... done ((TIME)).
< Dividing of lanes on approached lanes ... done ((TIME)).
< Processing turnarounds ... done ((TIME)).
< Rechecking of lane endings ... done ((TIME)).
< Computing traffic light control information ... done ((TIME)).
< Computing node logics ... done ((TIME)).
< Computing traffic light logics ... done ((TIME)).
<  0 traffic light(s) computed.
< Building inner edges ... done ((TIME)).
< -----------------------------------------------------
< Summary:
<  Node type statistics:
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : tutorial quickstart ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,6
> Error: no declaration found for element 'nodes'
>  In file 'data/quickstart.nod.xml'
>  At line/column 3/132.
> 
> Error: No nodes loaded.
> Quitting (on error).
---------- Differences in net ----------
4c4
< <net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">
---
> <net version="0.13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">
8,11d7
<     <type id="a" priority="3" numLanes="3" speed="13.89"/>
<     <type id="b" priority="3" numLanes="2" speed="13.89"/>
<     <type id="c" priority="2" numLanes="3" speed="13.89"/>
< 
13,15c9,11
<         <lane id=":1_0_0" index="0" speed="13.89" length="8.00" shape="1004.00,1008.00 996.00,1008.00"/>
<         <lane id=":1_0_1" index="1" speed="13.89" length="8.00" shape="1004.00,1004.80 996.00,1004.80"/>
<         <lane id=":1_0_2" index="2" speed="13.89" length="8.00" shape="1004.00,1001.60 996.00,1001.60"/>
---
>         <lane id=":1_0_0" index="0" speed="13.89" length="3.00" shape="1001.50,1008.25 998.50,1008.25"/>
>         <lane id=":1_0_1" index="1" speed="13.89" length="3.00" shape="1001.50,1004.95 998.50,1004.95"/>
>         <lane id=":1_0_2" index="2" speed="13.89" length="3.00" shape="1001.50,1001.65 998.50,1001.65"/>
18,20c14,16
<         <lane id=":1_3_0" index="0" speed="13.89" length="8.27" shape="996.00,995.20 998.46,994.70 1000.00,993.60 1001.54,992.50 1004.00,992.00"/>
<         <lane id=":1_3_1" index="1" speed="13.89" length="8.27" shape="996.00,995.20 1004.00,995.20"/>
<         <lane id=":1_3_2" index="2" speed="13.89" length="8.27" shape="996.00,998.40 1004.00,998.40"/>
---
>         <lane id=":1_3_0" index="0" speed="13.89" length="3.49" shape="998.50,995.05 1001.50,991.75"/>
>         <lane id=":1_3_1" index="1" speed="13.89" length="3.49" shape="998.50,995.05 1001.50,995.05"/>
>         <lane id=":1_3_2" index="2" speed="13.89" length="3.49" shape="998.50,998.35 1001.50,998.35"/>
23,25c19,21
<         <lane id=":2_0_0" index="0" speed="13.89" length="8.00" shape="1004.00,8.00 996.00,8.00"/>
<         <lane id=":2_0_1" index="1" speed="13.89" length="8.00" shape="1004.00,4.80 996.00,4.80"/>
<         <lane id=":2_0_2" index="2" speed="13.89" length="8.00" shape="1004.00,1.60 996.00,1.60"/>
---
<truncated after showing first 30 lines>
---------- Differences in output ----------
4,46c4,5
< Parsing edges from (FILE)
< Parsing connections from (FILE)
<  Import done:
<    14 nodes loaded.
<    3 types loaded.
<    26 edges loaded.
< Removing self-loops ... done ((TIME)).
< Removing empty nodes ... done ((TIME)).
<    0 nodes removed.
< Moving network to origin ... done ((TIME)).
< Computing turning directions ... done ((TIME)).
< Assigning nodes to traffic lights ... done ((TIME)).
< Sorting nodes' edges ... done ((TIME)).
< Computing node shapes ... done ((TIME)).
< Computing edge shapes ... done ((TIME)).
< Computing node types ... done ((TIME)).
< Computing priorities ... done ((TIME)).
< Computing approached edges ... done ((TIME)).
< Guessing and setting roundabouts ... done ((TIME)).
< Computing approaching lanes ... done ((TIME)).
< Dividing of lanes on approached lanes ... done ((TIME)).
< Processing turnarounds ... done ((TIME)).
< Rechecking of lane endings ... done ((TIME)).
< Computing traffic light control information ... done ((TIME)).
< Computing node logics ... done ((TIME)).
< Computing traffic light logics ... done ((TIME)).
<  0 traffic light(s) computed.
< Building inner edges ... done ((TIME)).
< -----------------------------------------------------
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : tutorial traci_pedestrian_crossing ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,28
> Error: no declaration found for element 'nodes'
>  In file 'data/pedcrossing.nod.xml'
>  At line/column 29/147.
> 
> Error: No nodes loaded.
> Quitting (on error).
> Traceback (most recent call last):
>   File "/home/delphi/gcc/sumo/tests/../tests/complex/tutorial/traci_pedestrian_crossing/runner.py", line 157, in <module>
>     '--period', '35']))
>   File "/home/delphi/gcc/sumo/tools/randomTrips.py", line 440, in main
>     net = sumolib.net.readNet(options.netfile)
>   File "/home/delphi/gcc/sumo/tools/sumolib/net/__init__.py", line 790, in readNet
>     parse(filename, netreader)
>   File "/usr/lib/python2.7/xml/sax/__init__.py", line 33, in parse
>     parser.parse(source)
>   File "/usr/lib/python2.7/xml/sax/expatreader.py", line 105, in parse
>     source = saxutils.prepare_input_source(source)
>   File "/usr/lib/python2.7/xml/sax/saxutils.py", line 349, in prepare_input_source
>     f = urllib.urlopen(source.getSystemId())
>   File "/usr/lib/python2.7/urllib.py", line 87, in urlopen
>     return opener.open(url)
>   File "/usr/lib/python2.7/urllib.py", line 215, in open
>     return getattr(self, name)(url)
>   File "/usr/lib/python2.7/urllib.py", line 471, in open_file
>     return self.open_local_file(url)
>   File "/usr/lib/python2.7/urllib.py", line 485, in open_local_file
>     raise IOError(e.errno, e.strerror, e.filename)
> IOError: [Errno 2] No such file or directory: 'pedcrossing.net.xml'
---------- Differences in output ----------
2,95d1
< Success.
< Loading configuration ... done.
< ***Starting server on port <PORT> ***
< Loading net-file from 'data/../pedcrossing.net.xml' ... done ((TIME)).
< Loading additional-files from 'data/pedcrossing.tll.xml' ... done ((TIME)).
< Loading done.
< Simulation started with time: 0.00
< 18.0: pedestrian ped0 pushes the button (waiting: 1)
< 43.0: pedestrian ped1 pushes the button (waiting: 1)
< 84.0: pedestrian ped2 pushes the button (waiting: 1)
< 122.0: pedestrian ped4 pushes the button (waiting: 1)
< 167.0: pedestrian ped7 pushes the button (waiting: 1)
< 277.0: pedestrian ped8 pushes the button (waiting: 1)
< 294.0: pedestrian ped9 pushes the button (waiting: 1)
< 341.0: pedestrian ped10 pushes the button (waiting: 1)
< 446.0: pedestrian ped11 pushes the button (waiting: 1)
< 487.0: pedestrian ped12 pushes the button (waiting: 1)
< 537.0: pedestrian ped13 pushes the button (waiting: 1)
< 613.0: pedestrian ped15 pushes the button (waiting: 1)
< 635.0: pedestrian ped16 pushes the button (waiting: 2)
< 686.0: pedestrian ped19 pushes the button (waiting: 1)
< 732.0: pedestrian ped20 pushes the button (waiting: 2)
< 734.0: pedestrian ped21 pushes the button (waiting: 2)
< 823.0: pedestrian ped22 pushes the button (waiting: 1)
< 857.0: pedestrian ped24 pushes the button (waiting: 1)
< 948.0: pedestrian ped25 pushes the button (waiting: 1)
< 1018.0: pedestrian ped27 pushes the button (waiting: 1)
< 1022.0: pedestrian ped28 pushes the button (waiting: 2)
< 1113.0: pedestrian ped30 pushes the button (waiting: 1)
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : routes duarouter_no_validation ( Last six runs Aug2020 )

---------- Differences in output ----------
1690c1690,1693
< Error: The route for vehicle 'v' has no edges.
---
> Error: no declaration found for element 'route'
>  In file 'routes.xml'
>  At line/column 5/44.
> 
1693c1696,1699
< Error: The route for vehicle 'v' has no edges.
---
> Error: no declaration found for element 'route'
>  In file 'routes.xml'
>  At line/column 5/44.
> 
1700c1706,1709
< Error: The route for vehicle 'v' has no edges.
---
> Error: no declaration found for element 'route'
>  In file 'routes.xml'
>  At line/column 5/44.
> 
1703c1712,1715
< Error: The route for vehicle 'v' has no edges.
---
> Error: no declaration found for element 'route'
>  In file 'routes.xml'
>  At line/column 5/44.
> 
1710c1722,1725
< Error: The route for vehicle 'v' has no edges.
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : routes sumo_no_validation ( Last six runs Aug2020 )

---------- Differences in output ----------
664c664,667
< Error: The route for trip 'v' has no edges.
---
> Error: no declaration found for element 'route'
>  In file 'routes.xml'
>  At line/column 5/44.
> 
667c670,673
< Error: The route for trip 'v' has no edges.
---
> Error: no declaration found for element 'route'
>  In file 'routes.xml'
>  At line/column 5/44.
> 
672c678,681
< Error: The route for trip 'v' has no edges.
---
> Error: no declaration found for element 'route'
>  In file 'routes.xml'
>  At line/column 5/44.
> 
675c684,687
< Error: The route for trip 'v' has no edges.
---
> Error: no declaration found for element 'route'
>  In file 'routes.xml'
>  At line/column 5/44.
> 
680c692,695
< Error: The route for trip 'v' has no edges.
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : tutorial san_pablo_dam ( Last six runs Aug2020 )

---------- Differences in errors ----------
1c1
< Warning: Value of tau=0.9649490355799297 in car following model 'carFollowing-Krauss' lower than simulation step size may cause collisions
---
> Warning: Value of tau=0.96494903558 in car following model 'carFollowing-Krauss' lower than simulation step size may cause collisions
170c170
< Warning: Value of tau=0.9931354115970644 in car following model 'carFollowing-Krauss' lower than simulation step size may cause collisions
---
> Warning: Value of tau=0.993135411597 in car following model 'carFollowing-Krauss' lower than simulation step size may cause collisions
---------- Differences in output ----------
104c104
< #### yields rmse: 172.2392
---
> #### yields rmse: 173.1440
108c108
< # simulation with: vMax:22.165 aMax:1.565 bMax:2.720 lCar:6.498 sigA:0.100 tTau:1.100
---
> # simulation with: vMax:22.166 aMax:1.566 bMax:2.717 lCar:6.497 sigA:0.100 tTau:1.100
110,111c110,111
< #### yields rmse: 60.5485
< # simulation with: vMax:22.182 aMax:1.590 bMax:2.655 lCar:6.477 sigA:0.000 tTau:1.214
---
> #### yields rmse: 60.6427
> # simulation with: vMax:22.183 aMax:1.592 bMax:2.653 lCar:6.476 sigA:0.000 tTau:1.214
113,114c113,114
< #### yields rmse: 58.6171
< # simulation with: vMax:22.053 aMax:1.375 bMax:3.141 lCar:6.655 sigA:0.100 tTau:1.100
---
> #### yields rmse: 58.5833
> # simulation with: vMax:22.050 aMax:1.376 bMax:3.137 lCar:6.653 sigA:0.100 tTau:1.100
116,117c116,117
< #### yields rmse: 60.3859
< # simulation with: vMax:22.094 aMax:1.336 bMax:3.121 lCar:6.691 sigA:0.215 tTau:1.311
---
> #### yields rmse: 60.5787
> # simulation with: vMax:22.092 aMax:1.337 bMax:3.117 lCar:6.689 sigA:0.216 tTau:1.310
119,120c119,120
< #### yields rmse: 150.9203
< # simulation with: vMax:21.730 aMax:1.633 bMax:3.267 lCar:6.403 sigA:0.100 tTau:1.100
---
<truncated after showing first 30 lines>
---------- Differences in results ----------
20c20
< 22.816 1.568 3.174 6.737 0.185 1.369 172.239236673
---
> 22.816 1.568 3.174 6.737 0.185 1.369 173.143957113
22,89c22,86
< 22.165 1.565 2.720 6.498 0.100 1.100 60.5484723072
< 22.182 1.590 2.655 6.477 -0.110 1.214 58.6171465806
< 22.053 1.375 3.141 6.655 0.100 1.100 60.3858938028
< 22.094 1.336 3.121 6.691 0.215 1.311 150.920255339
< 21.730 1.633 3.267 6.403 0.100 1.100 60.6021449482
< 21.880 1.251 3.028 6.724 0.100 1.100 60.6941055588
< 22.067 1.296 3.145 6.558 0.100 1.100 60.0940085599
< 22.196 1.182 3.224 6.395 0.100 1.100 61.8440867821
< 22.067 1.296 3.145 6.558 0.210 1.040 62.6424938313
< 21.894 1.163 3.030 6.596 0.100 1.100 59.4332301417
< 21.721 1.276 3.085 6.466 0.100 1.100 59.6644210123
< 21.925 1.207 2.927 6.549 0.092 1.105 59.5285982384
< 21.748 1.095 2.935 6.762 0.100 1.100 60.4884625499
< 21.925 1.076 3.070 6.522 0.100 1.100 59.2941433447
< 21.996 1.109 3.168 6.532 0.100 1.100 59.5609759817
< 21.925 1.076 3.070 6.522 0.070 1.045 63.8394295172
< 21.921 1.070 3.070 6.525 0.131 1.221 75.6576348087
< 21.922 1.074 3.073 6.525 0.040 1.115 59.6434222544
< 21.950 1.026 2.973 6.469 0.100 1.100 60.3399229337
< 21.905 1.100 3.082 6.469 0.099 1.102 59.709910891
< 21.836 1.098 3.094 6.604 0.100 1.100 59.2719209804
< 21.843 1.066 3.052 6.637 0.100 1.100 58.9090365156
< 21.830 1.027 3.007 6.649 0.100 1.100 58.6493074846
< 21.852 0.999 2.977 6.691 0.100 1.100 58.6911627841
< 21.828 1.004 3.027 6.649 0.101 1.098 58.9951959841
<truncated after showing first 30 lines>

Detailed information for the tests that had known bugs:

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output one_vehicle ( Last six runs Aug2020 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
10c10
< success 0.1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (71.4, 71.5) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
12c12
< success 1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (72.0, 73.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
14c14
< success 10 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
18c18
< success 0.1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (71.4, 71.5) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
20c20
< success 1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (72.0, 73.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
22c22
< success 10 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
24c24
< success 100 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (100.0, 200.0) [('e1', -1.0), ('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
34c34
< success 0.1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output teleport ( Last six runs Aug2020 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
2c2
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
---
> success 0.1 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
4c4
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
---
> success 0.1 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
6c6
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
---
> success 1 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
8c8
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
---
> success 1 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
10c10
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
---
> success 10 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
12c12
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
---
> success 10 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
14c14
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
---
> success 100 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
16c16
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output teleport_multihop ( Last six runs Aug2020 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
34c34
< success 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (230.0, 230.1) [('e2', 9.99), ('e3', 10.0), ('edge', 9.99), ('lane', 9.99)]
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (149.0, 149.1) [('e2', 9.99), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
36c36
< success 0.1 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (148.1, 148.2) [('e2', 9.99), ('e3', 10.0), ('edge', 9.99), ('lane', 9.99)]
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (149.0, 149.1) [('e2', 9.99), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
38c38
< success 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (230.0, 231.0) [('e2', 9.99), ('e3', 10.0), ('edge', 9.99), ('lane', 9.99)]
---
> failed 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (149.0, 150.0) [('e2', 9.93), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
40c40
< success 1 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (148.0, 149.0) [('e2', 9.91), ('e3', 10.0), ('edge', 9.91), ('lane', 9.91)]
---
> failed 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (149.0, 150.0) [('e2', 9.93), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
42c42
< success 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (230.0, 240.0) [('e2', 9.42), ('e3', 9.9), ('edge', 9.42), ('lane', 9.42)]
---
> failed 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (140.0, 150.0) [('e2', 9.99), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
44c44
< success 10 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (140.0, 150.0) [('e2', 9.96), ('e3', 9.99), ('edge', 9.96), ('lane', 9.96)]
---
> failed 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (140.0, 150.0) [('e2', 9.99), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
46c46
< success 100 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (200.0, 300.0) [('e1', 10.0), ('e2', 9.22), ('e3', 5.71), ('edge', 9.22), ('lane', 9.22)]
---
> failed 100 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (100.0, 200.0) [('e1', 10.0), ('e2', 7.95), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
48c48
< success 100 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (100.0, 200.0) [('e1', 9.53), ('e2', 5.82), ('e3', 6.93), ('edge', 5.82), ('lane', 5.82)]
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output teleport_multihop_newDefaults ( Last six runs Aug2020 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
18c18
< success 0.1 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.2, 76.3) [('e2', 10.49), ('e3', 10.35), ('edge', 10.49), ('lane', 10.49)]
20c20
< success 0.1 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.2, 76.3) [('e2', 10.49), ('e3', 10.35), ('edge', 10.49), ('lane', 10.49)]
22c22
< success 1 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.0, 77.0) [('e2', 10.39), ('e3', 10.35), ('edge', 10.39), ('lane', 10.39)]
24c24
< success 1 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.0, 77.0) [('e2', 10.39), ('e3', 10.35), ('edge', 10.39), ('lane', 10.39)]
26c26
< success 10 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.0, 80.0) [('e2', 10.42), ('e3', 10.25), ('edge', 10.42), ('lane', 10.42)]
28c28
< success 10 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.0, 80.0) [('e2', 10.42), ('e3', 10.25), ('edge', 10.42), ('lane', 10.42)]
30c30
< success 100 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0']
---
> failed 100 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (0.0, 100.0) [('e1', 10.27), ('e2', 10.24), ('e3', 9.59), ('edge', 10.24), ('lane', 10.24)]
32c32
< success 100 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output two_same_vehicles ( Last six runs Aug2020 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
10c10
< success 0.1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (75.4, 75.5) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
12c12
< success 1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (76.0, 77.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
14c14
< success 10 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
18c18
< success 0.1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (75.4, 75.5) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
20c20
< success 1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (76.0, 77.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
22c22
< success 10 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
24c24
< success 100 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (100.0, 200.0) [('e1', -1.0), ('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
34c34
< success 0.1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output two_vehicles_diff_length ( Last six runs Aug2020 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
10c10
< success 0.1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (76.4, 76.5) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
12c12
< success 1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (77.0, 78.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
14c14
< success 10 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
18c18
< success 0.1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (76.4, 76.5) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
20c20
< success 1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (77.0, 78.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
22c22
< success 10 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
24c24
< success 100 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (100.0, 200.0) [('e1', -1.0), ('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
34c34
< success 0.1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output two_vehicles_diff_speed ( Last six runs Aug2020 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
0a1,48
> Loading configuration ... done.
> failed 0.1 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (38.4, 38.5) [('e2', 9.6), ('e3', 9.5), ('edge', 9.6), ('lane', 9.6)]
> Loading configuration ... done.
> failed 1 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (38.0, 39.0) [('e2', 9.64), ('e3', 9.5), ('edge', 9.64), ('lane', 9.64)]
> Loading configuration ... done.
> failed 10 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (30.0, 40.0) [('e2', 9.86), ('e3', 9.5), ('edge', 9.86), ('lane', 9.86)]
> Loading configuration ... done.
> failed 100 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (0.0, 51.0) [('e2', 9.62), ('e3', 9.5), ('edge', 9.62), ('lane', 9.62)]
> Loading configuration ... done.
> failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (38.4, 38.5) [('e2', 9.6), ('e3', 9.5), ('edge', 9.6), ('lane', 9.6)]
> Loading configuration ... done.
> failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (38.0, 39.0) [('e2', 9.64), ('e3', 9.5), ('edge', 9.64), ('lane', 9.64)]
> Loading configuration ... done.
> failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (30.0, 40.0) [('e2', 9.86), ('e3', 9.5), ('edge', 9.86), ('lane', 9.86)]
> Loading configuration ... done.
> failed 100 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (0.0, 100.0) [('e1', 9.5), ('e2', 9.53), ('e3', 9.5), ('edge', 9.47), ('lane', 9.47)]
> Loading configuration ... done.
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (38.4, 38.5) [('e2', 9.6), ('e3', 9.5), ('edge', 9.6), ('lane', 9.6)]
> Loading configuration ... done.
> failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (38.0, 39.0) [('e2', 9.64), ('e3', 9.5), ('edge', 9.64), ('lane', 9.64)]
> Loading configuration ... done.
> failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (30.0, 40.0) [('e2', 9.86), ('e3', 9.5), ('edge', 9.86), ('lane', 9.86)]
> Loading configuration ... done.
> failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (0.0, 100.0) [('e1', 9.5), ('e2', 9.53), ('e3', 9.5), ('edge', 9.47), ('lane', 9.47)]
> Loading configuration ... done.
> failed 0.1 ['--step-length', '1', '--end', '51'] 3/1to2/1_0 (39.0, 40.0) [('e2', 9.6), ('e3', 9.5), ('edge', 9.6), ('lane', 9.6)]
> Loading configuration ... done.
> failed 1 ['--step-length', '1', '--end', '51'] 3/1to2/1_0 (39.0, 40.0) [('e2', 9.6), ('e3', 9.5), ('edge', 9.6), ('lane', 9.6)]
> Loading configuration ... done.
<truncated after showing first 30 lines>

TEST had known bugs (#4727) on ts-sim-build-ba : traci ContextSubscriptionFilters leadFollow carFollowing ( Last six runs Aug2020 )

#4727
(This bug was triggered by text found in file 'output' matching '.')
---------- Differences in output ----------
4d3
< lead_straight
6d4
< [002] Context results for vehicle 'ego':
7a6
> [002] Context results for vehicle 'ego':
9d7
< [003] Context results for vehicle 'ego':
10a9
> [003] Context results for vehicle 'ego':
12d10
< [004] Context results for vehicle 'ego':
13a12
> [004] Context results for vehicle 'ego':
15d13
< [005] Context results for vehicle 'ego':
16a15
> [005] Context results for vehicle 'ego':
18d16
< [006] Context results for vehicle 'ego':
19a18
> [006] Context results for vehicle 'ego':
21d19
< [007] Context results for vehicle 'ego':
22a21
> [007] Context results for vehicle 'ego':
24d22
< [008] Context results for vehicle 'ego':
25a24
> [008] Context results for vehicle 'ego':
<truncated after showing first 30 lines>

2 TESTS had known bugs (#4727) on ts-sim-build-ba :

#4727
(This bug was triggered by text found in file 'output' matching '.')
---------- Differences in output ----------
4a5
> follow_straight
7d7
< follow_straight
9a10
> follow_straight
12d12
< follow_straight
14a15
> follow_straight
17d17
< follow_straight
19a20
> follow_straight
22d22
< follow_straight
24a25
> follow_straight
27d27
< follow_straight
29a30
> follow_straight
32d32
< follow_straight
34a35
> follow_straight
37d37
< follow_straight
39a40
> follow_straight
<truncated after showing first 30 lines>
traci ContextSubscriptionFilters leadFollow laneChangeLeft ( Last six runs Aug2020 )
traci ContextSubscriptionFilters leadFollow laneChangeRight ( Last six runs Aug2020 )

TEST had known bugs (#4727) on ts-sim-build-ba : traci ContextSubscriptionFilters leadFollow laneChangeNeighbors ( Last six runs Aug2020 )

#4727
(This bug was triggered by text found in file 'output' matching '.')
---------- Differences in output ----------
4,5d3
< follow_straight
< follow_right
6a5,7
> follow_right
> follow_straight
> lead_left
9d9
< lead_left
11,12d10
< follow_straight
< follow_right
13a12,14
> follow_right
> follow_straight
> lead_left
16d16
< lead_left
18,19d17
< follow_straight
< follow_right
20a19,21
> follow_right
> follow_straight
> lead_left
23d23
< lead_left
25,26d24
< follow_straight
< follow_right
<truncated after showing first 30 lines>

TEST had known bugs (see #3263) on ts-sim-build-ba : traci vehicle moveToXY keepRoute2 ( Last six runs Aug2020 )

mapping failure
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
0a1,2
> internal corner (inside, segment2) failed: x=198, x2=198.0,   y=1.9, y2=1.9,   lane=middle_0, lane2=middle_0, pos=102, pos2=98.0   posLat=2.0 posLat2=1.9
> internal corner (outside, far) failed: x=203, x2=203.0,   y=-4, y2=-4.0,   lane=, lane2=middle_0, pos=-1073741824.0, pos2=100.0   posLat=-1073741824.0 posLat2=-1.41421356237

TEST had known bugs (see #5383) on ts-sim-build-ba : traci vehicle moveToXY permissions ( Last six runs Aug2020 )

mapping failure
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
0a1
> right lane (ignore permissions) failed: mode=6 x=40, x2=40.0,   y=-1.6, y2=-1.6,   lane=beg_0, lane2=, pos=40, pos2=-1073741824.0   posLat=0.0 posLat2=-1073741824.0

TEST had known bugs (see #6192) on ts-sim-build-ba : traci vehicle openGap with_low_maxDecel_fast_CACC ( Last six runs Aug2020 )

not even failing as intended
(This bug was triggered by text found in file 'errors' matching 'Error')
---------- Differences in errors ----------
0a1,8
> Traceback (most recent call last):
>   File "/home/delphi/gcc/sumo/tests/../tests/complex/traci/vehicle/openGap/runner.py", line 155, in <module>
>     runSingle(targetTimeHeadway, targetSpaceHeadway, duration, changeRate, maxDecel, refVehID)
>   File "/home/delphi/gcc/sumo/tests/../tests/complex/traci/vehicle/openGap/runner.py", line 65, in runSingle
>     leader = results[tc.VAR_LEADER][0]
> TypeError: 'NoneType' object has no attribute '__getitem__'
> Error: tcpip::Socket::recvAndCheck @ recv: peer shutdown
> Quitting (on error).
---------- Differences in output ----------
4,103c4,103
< Time 2.0: Gap 'follower'->'leader' = 5.938 (headway=0.367)
< 'follower' speed = 16.161582708
< Time 3.0: Gap 'follower'->'leader' = 8.966 (headway=0.528)
< 'follower' speed = 16.9836198736
< Time 4.0: Gap 'follower'->'leader' = 11.281 (headway=0.641)
< 'follower' speed = 17.5863190784
< Time 5.0: Gap 'follower'->'leader' = 13.069 (headway=0.725)
< 'follower' speed = 18.0379935645
< Time 6.0: Gap 'follower'->'leader' = 14.459 (headway=0.787)
< 'follower' speed = 18.3815472225
< Time 7.0: Gap 'follower'->'leader' = 15.545 (headway=0.834)
< 'follower' speed = 18.6456171431
< Time 8.0: Gap 'follower'->'leader' = 16.397 (headway=0.870)
< 'follower' speed = 18.8501483763
< Time 9.0: Gap 'follower'->'leader' = 17.068 (headway=0.898)
< 'follower' speed = 19.0094667411
< Time 10.0: Gap 'follower'->'leader' = 17.596 (headway=0.920)
< 'follower' speed = 19.1340998278
< Time 11.0: Gap 'follower'->'leader' = 18.013 (headway=0.937)
< 'follower' speed = 19.231918606
< Time 12.0: Gap 'follower'->'leader' = 18.342 (headway=0.950)
< 'follower' speed = 19.3088858604
< Time 13.0: Gap 'follower'->'leader' = 18.603 (headway=0.960)
< 'follower' speed = 19.3695649077
< Time 14.0: Gap 'follower'->'leader' = 18.810 (headway=0.969)
< 'follower' speed = 19.4174756866
< Time 15.0: Gap 'follower'->'leader' = 18.973 (headway=0.975)
< 'follower' speed = 19.4553500651
< Time 16.0: Gap 'follower'->'leader' = 19.103 (headway=0.980)
<truncated after showing first 30 lines>