16Jan19rv1_1_0+0259-94e6c6fb32 - detailed test results for COMPLEX

To reconnect the TextTest GUI to these results, run:

texttest -a complex -d /home/delphi/gcc/sumo/tests -reconnect /home/delphi/gcc/texttesttmp/gcc4_64.31Jan002604.7181 -g

To start TextTest for these tests, run:

texttest -a complex -d /home/delphi/gcc/sumo/tests

default: 258 tests: 232 succeeded 14 known bugs 12 FAILED

Detailed information for the tests that FAILED:

TEST FAILED on ts-sim-build-ba : traci multipleConnections asyncDisconnect sumo ( Last six runs Jan2019 )

---------- Differences in output ----------
6,8d5
<   waiting for 2 clients...
<   client connected
<   client connected
20,22d16
<   waiting for 2 clients...
<   client connected
<   client connected
35,38d28
<   waiting for 3 clients...
<   client connected
<   client connected
<   client connected
52,55d41
<   waiting for 3 clients...
<   client connected
<   client connected
<   client connected
71,73d56
<   waiting for 2 clients...
<   client connected
<   client connected
85,87d67
<   waiting for 2 clients...
<   client connected
<   client connected
100,103d79
<   waiting for 3 clients...
<   client connected
<   client connected
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : traci multipleConnections basic sumo ( Last six runs Jan2019 )

---------- Differences in output ----------
6,8d5
<   waiting for 2 clients...
<   client connected
<   client connected
18,20d14
<   waiting for 2 clients...
<   client connected
<   client connected
31,36d24
<   waiting for 5 clients...
<   client connected
<   client connected
<   client connected
<   client connected
<   client connected
49,54d36
<   waiting for 5 clients...
<   client connected
<   client connected
<   client connected
<   client connected
<   client connected
69,71d50
<   waiting for 2 clients...
<   client connected
<   client connected
81,83d59
<   waiting for 2 clients...
<   client connected
<   client connected
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-build-ba : traci multipleConnections concurringSubscriptions sumo ( Last six runs Jan2019 )

---------- Differences in output ----------
6,8d5
<   waiting for 2 clients...
<   client connected
<   client connected
22,24d18
<   waiting for 2 clients...
<   client connected
<   client connected

2 TESTS FAILED on ts-sim-build-ba :

---------- Differences in output ----------
6,10d5
<   waiting for 4 clients...
<   client connected
<   client connected
<   client connected
<   client connected
26,30d20
<   waiting for 4 clients...
<   client connected
<   client connected
<   client connected
<   client connected
48,52d37
<   waiting for 4 clients...
<   client connected
<   client connected
<   client connected
<   client connected
68,72d52
<   waiting for 4 clients...
<   client connected
<   client connected
<   client connected
<   client connected

traci multipleConnections differentSteplengths sumo ( Last six runs Jan2019 )
traci multipleConnections subsecondSUMOstep sumo ( Last six runs Jan2019 )

TEST FAILED on ts-sim-build-ba : traci multipleConnections orderDependentResults sumo ( Last six runs Jan2019 )

---------- Differences in output ----------
6d5
<   waiting for 2 clients...
8d6
<   client connected
10d7
<   client connected
1244d1240
<   waiting for 2 clients...
1246d1241
<   client connected
1248d1242
<   client connected

TEST FAILED on ts-sim-build-ba : traci multipleConnections unspecifiedOrderWarning sumo ( Last six runs Jan2019 )

---------- Differences in output ----------
5d4
<   waiting for 2 clients...
8,9d6
<   client connected
<   client connected
15d11
<   waiting for 2 clients...
18,19d13
<   client connected
<   client connected

TEST FAILED on ts-sim-build-ba : tutorial city_mobil ( Last six runs Jan2019 )

---------- Differences in output ----------
13,14c13,14
< ('footmainout', 'footmain0to1') True True True
< ('footmainout', 'footmain1to2') True True False
---
> ('footmainout', 'footmain0to1') True True False
> ('footmainout', 'footmain1to2') True True True
17,18c17,18
< ('footmainout', 'footmain4to5') True True True
< ('footmainout', 'footmain5to6') True True True
---
> ('footmainout', 'footmain4to5') True True False
> ('footmainout', 'footmain5to6') True True False
31,32c31,32
< ('footmainout', 'footmain0to1') True True True
< ('footmainout', 'footmain1to2') True True False
---
> ('footmainout', 'footmain0to1') True True False
> ('footmainout', 'footmain1to2') True True True
35,36c35,36
< ('footmainout', 'footmain4to5') True True True
< ('footmainout', 'footmain5to6') True True True
---
> ('footmainout', 'footmain4to5') True True False
> ('footmainout', 'footmain5to6') True True False

TEST FAILED on ts-sim-build-ba : unit_tests testfoxtools ( Last six runs Jan2019 )

---------- Differences in errors ----------
0a1,10
> Traceback (most recent call last):
>   File "/home/delphi/gcc/sumo/tests/toolrunner.py", line 29, in <module>
>     stdout=sys.stdout, stderr=sys.stderr)
>   File "/usr/lib/python2.7/subprocess.py", line 172, in call
>     return Popen(*popenargs, **kwargs).wait()
>   File "/usr/lib/python2.7/subprocess.py", line 394, in __init__
>     errread, errwrite)
>   File "/usr/lib/python2.7/subprocess.py", line 1047, in _execute_child
>     raise child_exception
> OSError: [Errno 2] No such file or directory
---------- Differences in output ----------
1,13d0
< Running main() from gtest_main.cc
< [==========] Running 2 tests from 1 test case.
< [----------] Global test environment set-up.
< [----------] 2 tests from FXWorkerThread
< [ RUN      ] FXWorkerThread.test_init
< [       OK ] FXWorkerThread.test_init ((TIME))
< [ RUN      ] FXWorkerThread.test_get_all
< [       OK ] FXWorkerThread.test_get_all ((TIME))
< [----------] 2 tests from FXWorkerThread ((TIME) total)
< 
< [----------] Global test environment tear-down
< [==========] 2 tests from 1 test case ran. ((TIME) total)
< [  PASSED  ] 2 tests.
---------- New result in exitcode ----------
1

TEST FAILED on ts-sim-build-ba : unit_tests testgeom ( Last six runs Jan2019 )

---------- Differences in errors ----------
0a1,10
> Traceback (most recent call last):
>   File "/home/delphi/gcc/sumo/tests/toolrunner.py", line 29, in <module>
>     stdout=sys.stdout, stderr=sys.stderr)
>   File "/usr/lib/python2.7/subprocess.py", line 172, in call
>     return Popen(*popenargs, **kwargs).wait()
>   File "/usr/lib/python2.7/subprocess.py", line 394, in __init__
>     errread, errwrite)
>   File "/usr/lib/python2.7/subprocess.py", line 1047, in _execute_child
>     raise child_exception
> OSError: [Errno 2] No such file or directory
---------- Differences in output ----------
1,67d0
< Running main() from gtest_main.cc
< [==========] Running 26 tests from 3 test cases.
< [----------] Global test environment set-up.
< [----------] 10 tests from Boundary
< [ RUN      ] Boundary.test_method_add
< [       OK ] Boundary.test_method_add ((TIME))
< [ RUN      ] Boundary.test_method_add_multiple
< [       OK ] Boundary.test_method_add_multiple ((TIME))
< [ RUN      ] Boundary.test_method_getCenter
< [       OK ] Boundary.test_method_getCenter ((TIME))
< [ RUN      ] Boundary.test_method_getWidthHeight
< [       OK ] Boundary.test_method_getWidthHeight ((TIME))
< [ RUN      ] Boundary.test_method_around
< [       OK ] Boundary.test_method_around ((TIME))
< [ RUN      ] Boundary.test_method_overlapsWith
< [       OK ] Boundary.test_method_overlapsWith ((TIME))
< [ RUN      ] Boundary.test_method_crosses
< [       OK ] Boundary.test_method_crosses ((TIME))
< [ RUN      ] Boundary.test_method_partialWithin
< [       OK ] Boundary.test_method_partialWithin ((TIME))
< [ RUN      ] Boundary.test_method_flipY
< [       OK ] Boundary.test_method_flipY ((TIME))
< [ RUN      ] Boundary.test_method_moveby
< [       OK ] Boundary.test_method_moveby ((TIME))
< [----------] 10 tests from Boundary ((TIME) total)
< 
< [----------] 1 test from GeoConvHelper
< [ RUN      ] GeoConvHelper.test_method_x2cartesian
< [       OK ] GeoConvHelper.test_method_x2cartesian ((TIME))
<truncated after showing first 30 lines>
---------- New result in exitcode ----------
1

TEST FAILED on ts-sim-build-ba : unit_tests testmicrosim ( Last six runs Jan2019 )

---------- Differences in errors ----------
0a1,10
> Traceback (most recent call last):
>   File "/home/delphi/gcc/sumo/tests/toolrunner.py", line 29, in <module>
>     stdout=sys.stdout, stderr=sys.stderr)
>   File "/usr/lib/python2.7/subprocess.py", line 172, in call
>     return Popen(*popenargs, **kwargs).wait()
>   File "/usr/lib/python2.7/subprocess.py", line 394, in __init__
>     errread, errwrite)
>   File "/usr/lib/python2.7/subprocess.py", line 1047, in _execute_child
>     raise child_exception
> OSError: [Errno 2] No such file or directory
---------- Differences in output ----------
1,29d0
< Running main() from gtest_main.cc
< [==========] Running 7 tests from 3 test cases.
< [----------] Global test environment set-up.
< [----------] 1 test from MSEventControl
< [ RUN      ] MSEventControl.test_method_execute
< [       OK ] MSEventControl.test_method_execute ((TIME))
< [----------] 1 test from MSEventControl ((TIME) total)
< 
< [----------] 4 tests from MSCFModelTest
< [ RUN      ] MSCFModelTest.test_method_brakeGap
< [       OK ] MSCFModelTest.test_method_brakeGap ((TIME))
< [ RUN      ] MSCFModelTest.test_method_static_brakeGap
< [       OK ] MSCFModelTest.test_method_static_brakeGap ((TIME))
< [ RUN      ] MSCFModelTest.test_method_static_freeSpeed
< [       OK ] MSCFModelTest.test_method_static_freeSpeed ((TIME))
< [ RUN      ] MSCFModelTest.test_method_static_freeSpeed_half
< [       OK ] MSCFModelTest.test_method_static_freeSpeed_half ((TIME))
< [----------] 4 tests from MSCFModelTest ((TIME) total)
< 
< [----------] 2 tests from MSCFModel_IDMTest
< [ RUN      ] MSCFModel_IDMTest.test_method_brakeGap
< [       OK ] MSCFModel_IDMTest.test_method_brakeGap ((TIME))
< [ RUN      ] MSCFModel_IDMTest.test_method_getSecureGap
< [       OK ] MSCFModel_IDMTest.test_method_getSecureGap ((TIME))
< [----------] 2 tests from MSCFModel_IDMTest ((TIME) total)
< 
< [----------] Global test environment tear-down
< [==========] 7 tests from 3 test cases ran. ((TIME) total)
< [  PASSED  ] 7 tests.
<truncated after showing first 30 lines>
---------- New result in exitcode ----------
1

TEST FAILED on ts-sim-build-ba : unit_tests testnetbuild ( Last six runs Jan2019 )

---------- Differences in errors ----------
0a1,10
> Traceback (most recent call last):
>   File "/home/delphi/gcc/sumo/tests/toolrunner.py", line 29, in <module>
>     stdout=sys.stdout, stderr=sys.stderr)
>   File "/usr/lib/python2.7/subprocess.py", line 172, in call
>     return Popen(*popenargs, **kwargs).wait()
>   File "/usr/lib/python2.7/subprocess.py", line 394, in __init__
>     errread, errwrite)
>   File "/usr/lib/python2.7/subprocess.py", line 1047, in _execute_child
>     raise child_exception
> OSError: [Errno 2] No such file or directory
---------- Differences in output ----------
1,16d0
< Running main() from gtest_main.cc
< [==========] Running 2 tests from 2 test cases.
< [----------] Global test environment set-up.
< [----------] 1 test from NBHeightMapperTest
< [ RUN      ] NBHeightMapperTest.test_method_getZ
< [       OK ] NBHeightMapperTest.test_method_getZ ((TIME))
< [----------] 1 test from NBHeightMapperTest ((TIME) total)
< 
< [----------] 1 test from NBTrafficLightLogic
< [ RUN      ] NBTrafficLightLogic.test_method_getDuration
< [       OK ] NBTrafficLightLogic.test_method_getDuration ((TIME))
< [----------] 1 test from NBTrafficLightLogic ((TIME) total)
< 
< [----------] Global test environment tear-down
< [==========] 2 tests from 2 test cases ran. ((TIME) total)
< [  PASSED  ] 2 tests.
---------- New result in exitcode ----------
1

Detailed information for the tests that had known bugs:

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output one_vehicle ( Last six runs Jan2019 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
10c10
< success 0.1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (71.3, 71.4) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
12c12
< success 1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (72.0, 73.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
14c14
< success 10 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
18c18
< success 0.1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (71.3, 71.4) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
20c20
< success 1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (72.0, 73.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
22c22
< success 10 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
24c24
< success 100 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (100.0, 200.0) [('e1', -1.0), ('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
34c34
< success 0.1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output teleport ( Last six runs Jan2019 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
2c2
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
---
> success 0.1 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
4c4
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
---
> success 0.1 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
6c6
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
---
> success 1 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
8c8
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
---
> success 1 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
10c10
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
---
> success 10 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
12c12
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
---
> success 10 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
14c14
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
---
> success 100 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
16c16
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output teleport_multihop ( Last six runs Jan2019 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
34c34
< success 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (230.0, 230.1) [('e2', 9.99), ('e3', 10.0), ('edge', 9.99), ('lane', 9.99)]
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (149.0, 149.1) [('e2', 9.99), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
36c36
< success 0.1 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (148.1, 148.2) [('e2', 9.99), ('e3', 10.0), ('edge', 9.99), ('lane', 9.99)]
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (149.0, 149.1) [('e2', 9.99), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
38c38
< success 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (230.0, 231.0) [('e2', 9.99), ('e3', 10.0), ('edge', 9.99), ('lane', 9.99)]
---
> failed 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (149.0, 150.0) [('e2', 9.93), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
40c40
< success 1 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (148.0, 149.0) [('e2', 9.91), ('e3', 10.0), ('edge', 9.91), ('lane', 9.91)]
---
> failed 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (149.0, 150.0) [('e2', 9.93), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
42c42
< success 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (230.0, 240.0) [('e2', 9.42), ('e3', 9.9), ('edge', 9.42), ('lane', 9.42)]
---
> failed 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (140.0, 150.0) [('e2', 9.99), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
44c44
< success 10 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (140.0, 150.0) [('e2', 9.96), ('e3', 9.99), ('edge', 9.96), ('lane', 9.96)]
---
> failed 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (140.0, 150.0) [('e2', 9.99), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
46c46
< success 100 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (200.0, 300.0) [('e1', 10.0), ('e2', 9.22), ('e3', 5.71), ('edge', 9.22), ('lane', 9.22)]
---
> failed 100 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (100.0, 200.0) [('e1', 10.0), ('e2', 7.95), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
48c48
< success 100 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (100.0, 200.0) [('e1', 9.53), ('e2', 5.82), ('e3', 6.93), ('edge', 5.82), ('lane', 5.82)]
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output teleport_multihop_newDefaults ( Last six runs Jan2019 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
18c18
< success 0.1 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.2, 76.3) [('e2', 10.49), ('e3', 10.35), ('edge', 10.49), ('lane', 10.49)]
20c20
< success 0.1 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.2, 76.3) [('e2', 10.49), ('e3', 10.35), ('edge', 10.49), ('lane', 10.49)]
22c22
< success 1 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.0, 77.0) [('e2', 10.39), ('e3', 10.35), ('edge', 10.39), ('lane', 10.39)]
24c24
< success 1 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.0, 77.0) [('e2', 10.39), ('e3', 10.35), ('edge', 10.39), ('lane', 10.39)]
26c26
< success 10 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.0, 80.0) [('e2', 10.42), ('e3', 10.25), ('edge', 10.42), ('lane', 10.42)]
28c28
< success 10 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.0, 80.0) [('e2', 10.42), ('e3', 10.25), ('edge', 10.42), ('lane', 10.42)]
30c30
< success 100 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0']
---
> failed 100 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (0.0, 100.0) [('e1', 10.27), ('e2', 10.24), ('e3', 9.59), ('edge', 10.24), ('lane', 10.24)]
32c32
< success 100 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output two_same_vehicles ( Last six runs Jan2019 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
10c10
< success 0.1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (75.4, 75.5) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
12c12
< success 1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (76.0, 77.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
14c14
< success 10 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
18c18
< success 0.1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (75.4, 75.5) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
20c20
< success 1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (76.0, 77.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
22c22
< success 10 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
24c24
< success 100 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (100.0, 200.0) [('e1', -1.0), ('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
34c34
< success 0.1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output two_vehicles_diff_length ( Last six runs Jan2019 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
10c10
< success 0.1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (76.4, 76.5) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
12c12
< success 1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (77.0, 78.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
14c14
< success 10 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
18c18
< success 0.1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (76.4, 76.5) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
20c20
< success 1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (77.0, 78.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
22c22
< success 10 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
24c24
< success 100 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (100.0, 200.0) [('e1', -1.0), ('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
34c34
< success 0.1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-build-ba : sumo output two_vehicles_diff_speed ( Last six runs Jan2019 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
0a1,48
> Loading configuration... done.
> failed 0.1 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (38.4, 38.5) [('e2', 9.6), ('e3', 9.5), ('edge', 9.6), ('lane', 9.6)]
> Loading configuration... done.
> failed 1 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (38.0, 39.0) [('e2', 9.64), ('e3', 9.5), ('edge', 9.64), ('lane', 9.64)]
> Loading configuration... done.
> failed 10 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (30.0, 40.0) [('e2', 9.86), ('e3', 9.5), ('edge', 9.86), ('lane', 9.86)]
> Loading configuration... done.
> failed 100 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (0.0, 51.0) [('e2', 9.62), ('e3', 9.5), ('edge', 9.62), ('lane', 9.62)]
> Loading configuration... done.
> failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (38.4, 38.5) [('e2', 9.6), ('e3', 9.5), ('edge', 9.6), ('lane', 9.6)]
> Loading configuration... done.
> failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (38.0, 39.0) [('e2', 9.64), ('e3', 9.5), ('edge', 9.64), ('lane', 9.64)]
> Loading configuration... done.
> failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (30.0, 40.0) [('e2', 9.86), ('e3', 9.5), ('edge', 9.86), ('lane', 9.86)]
> Loading configuration... done.
> failed 100 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (0.0, 100.0) [('e1', 9.5), ('e2', 9.53), ('e3', 9.5), ('edge', 9.47), ('lane', 9.47)]
> Loading configuration... done.
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (38.4, 38.5) [('e2', 9.6), ('e3', 9.5), ('edge', 9.6), ('lane', 9.6)]
> Loading configuration... done.
> failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (38.0, 39.0) [('e2', 9.64), ('e3', 9.5), ('edge', 9.64), ('lane', 9.64)]
> Loading configuration... done.
> failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (30.0, 40.0) [('e2', 9.86), ('e3', 9.5), ('edge', 9.86), ('lane', 9.86)]
> Loading configuration... done.
> failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (0.0, 100.0) [('e1', 9.5), ('e2', 9.53), ('e3', 9.5), ('edge', 9.47), ('lane', 9.47)]
> Loading configuration... done.
> failed 0.1 ['--step-length', '1', '--end', '51'] 3/1to2/1_0 (39.0, 40.0) [('e2', 9.6), ('e3', 9.5), ('edge', 9.6), ('lane', 9.6)]
> Loading configuration... done.
> failed 1 ['--step-length', '1', '--end', '51'] 3/1to2/1_0 (39.0, 40.0) [('e2', 9.6), ('e3', 9.5), ('edge', 9.6), ('lane', 9.6)]
> Loading configuration... done.
<truncated after showing first 30 lines>

TEST had known bugs (#4727) on ts-sim-build-ba : traci ContextSubscriptionFilters leadFollow carFollowing ( Last six runs Jan2019 )

#4727
(This bug was triggered by text found in file 'output' matching '.')
---------- Differences in output ----------
23d22
< follow_straight
44d42
< follow_straight
65d62
< follow_straight

TEST had known bugs (#4727) on ts-sim-build-ba : traci ContextSubscriptionFilters leadFollow laneChangeLeft ( Last six runs Jan2019 )

#4727
(This bug was triggered by text found in file 'output' matching '.')
---------- Differences in output ----------
35d34
< lead_left
37c36
< follow_straight
---
> lead_left
70d68
< lead_left
72c70
< follow_straight
---
> lead_left
107d104
< follow_straight

TEST had known bugs (#4727) on ts-sim-build-ba : traci ContextSubscriptionFilters leadFollow laneChangeNeighbors ( Last six runs Jan2019 )

#4727
(This bug was triggered by text found in file 'output' matching '.')
---------- Differences in output ----------
46d45
< follow_straight
95d93
< follow_straight
144d141
< follow_straight

TEST had known bugs (#4727) on ts-sim-build-ba : traci ContextSubscriptionFilters leadFollow laneChangeRight ( Last six runs Jan2019 )

#4727
(This bug was triggered by text found in file 'output' matching '.')
---------- Differences in output ----------
35d34
< lead_right
37c36
< follow_straight
---
> lead_right
70d68
< lead_right
72c70
< follow_straight
---
> lead_right
107d104
< follow_straight

TEST had known bugs (bug 2465 (assigned)) on ts-sim-build-ba : traci pythonApi distance_after_reroute ( Last six runs Jan2019 )

******************************************************
Ticket #2465 (assigned defect: )
traci distance request is incorrect after rerouting
http://sumo.dlr.de/trac.wsgi/ticket/2465
Reported By: behrisch Owned by: hilb_ro
Priority: major Milestone: 1.0.0
Component: TraCI Version: 
Description:
retrieving the already driven distance (0xa4 0x84) gives incorrect values (starting from the rerouting edge instead of the beginning)
******************************************************
(This bug was triggered by text found in file 'output' matching '162')
---------- Differences in output ----------
7c7
< 1165.0
---
> 162.04

TEST had known bugs (see #3263) on ts-sim-build-ba : traci pythonApi moveToXY elevation_sublane ( Last six runs Jan2019 )

mapping failure
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
0a1,5
> ascending beg failed: exZ=5, z2=0.0
> middle failed: exZ=10, z2=0.0
> descending end failed: exZ=5, z2=0.0
> outside network, use last position failed: exZ=5, z2=0.0
> far outside network, use last position failed: exZ=5, z2=0.0

TEST had known bugs (see #3263) on ts-sim-build-ba : traci pythonApi moveToXY keepRoute2 ( Last six runs Jan2019 )

mapping failure
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
0a1
> internal corner (inside, segment2) failed: x=198, x2=198.0,   y=1.9, y2=1.9,   lane=middle_0, lane2=middle_0, pos=102, pos2=98.0   posLat=2.0 posLat2=1.9