08Aug20rv1_6_0+1462-a775417066 - detailed test results for COMPLEX

default: 369 tests: 295 succeeded 58 FAILED 14 known bugs 2 killed

Detailed information for the tests that FAILED:

3 TESTS FAILED on ts-sim-winbuild-ba :

---------- Differences in errors ----------
1,338c1,3
< ------------------ net/edge[0]@from:
< Error: Attribute 'from' in definition of edge '1' is empty.
< Warning: Skipping isolated junction '1'.
< Error: unknown from-edge '1' in connection
< Quitting (on error).
< ------------------ net/edge[1]@from:
< Error: Attribute 'from' in definition of edge '2' is empty.
< Warning: Skipping isolated junction '3'.
< Error: unknown to-edge '2' in connection
< Quitting (on error).
< ------------------ net/edge[0]@from:a
< Warning: Skipping isolated junction '1'.
< Error: Unknown node 'a'.
< Quitting (on error).
< ------------------ net/edge[1]@from:a
< Error: Unknown node 'a'.
< Quitting (on error).
< ------------------ net/edge[0]@from:<remove>
< Error: Attribute 'from' is missing in definition of edge '1'.
< Warning: Skipping isolated junction '1'.
< Error: unknown from-edge '1' in connection
< Quitting (on error).
< ------------------ net/edge[1]@from:<remove>
< Error: Attribute 'from' is missing in definition of edge '2'.
< Warning: Skipping isolated junction '3'.
< Error: unknown to-edge '2' in connection
< Quitting (on error).
< ------------------ net/edge[0]@function:a
< Error: value 'a' not in enumeration
<truncated after showing first 30 lines>
---------- Differences in output ----------
2,3d1
< Success.
< Success.
6,25c4
< >>> ok...
< 
< Running broken net
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
---
> Error on processing the 'correct' network!

3 TESTS FAILED on ts-sim-winbuild-ba :

---------- Differences in errors ----------
1,4c1,5
< ------------------ net/edge[0]@from:
< Error: Attribute 'from' in definition of edge '1' is empty.
< Warning: Skipping isolated junction '1'.
< Error: unknown from-edge '1' in connection
---
> Error: no declaration found for element 'nodes'
>  In file 'input_nodes.nod.xml'
>  At line/column 2/132.
> 
> Error: No nodes loaded.
6,9c7
< ------------------ net/edge[1]@from:
< Error: Attribute 'from' in definition of edge '2' is empty.
< Warning: Skipping isolated junction '3'.
< Error: unknown to-edge '2' in connection
---
> Error: The network file 'correct.net.xml' is not accessible.
11,477d8
< ------------------ net/edge[0]@from:a
< Warning: Skipping isolated junction '1'.
< Error: Unknown node 'a'.
< Quitting (on error).
< ------------------ net/edge[1]@from:a
< Error: Unknown node 'a'.
< Quitting (on error).
< ------------------ net/edge[0]@from:<remove>
< Error: Attribute 'from' is missing in definition of edge '1'.
< Warning: Skipping isolated junction '1'.
< Error: unknown from-edge '1' in connection
<truncated after showing first 30 lines>
---------- Differences in output ----------
2,3d1
< Success.
< Success.
6,42c4
< >>> ok...
< 
< Running broken net
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : broken_nets netconvert ( Last six runs Aug2020 )

---------- Differences in errors ----------
1,31c1,3
< ------------------ net/edge[0]@from:
< Error: Attribute 'from' in definition of edge '1' is empty.
< Error: Edge's '1' from-node '' is not known.
< Quitting (on error).
< ------------------ net/edge[1]@from:
< Error: Attribute 'from' in definition of edge '2' is empty.
< Error: Edge's '2' from-node '' is not known.
< Quitting (on error).
< ------------------ net/edge[0]@from:a
< Error: Edge's '1' from-node 'a' is not known.
< Quitting (on error).
< ------------------ net/edge[1]@from:a
< Error: Edge's '2' from-node 'a' is not known.
< Quitting (on error).
< ------------------ net/edge[0]@from:<remove>
< Error: Edge's '1' from-node '' is not known.
< Quitting (on error).
< ------------------ net/edge[1]@from:<remove>
< Error: Edge's '2' from-node '' is not known.
< Quitting (on error).
< ------------------ net/edge[0]@function:a
< Error: value 'a' not in enumeration
<  In file 'mod.net.xml'
<  At line/column 28/60.
< 
< Error: No nodes loaded.
< Quitting (on error).
< ------------------ net/edge[1]@function:a
< Error: value 'a' not in enumeration
<truncated after showing first 30 lines>
---------- Differences in output ----------
2,3d1
< Success.
< Success.
6,24c4
< >>> ok...
< 
< Running broken net
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
---
> Error on processing the 'correct' network!

TEST FAILED on ts-sim-winbuild-ba : broken_nets netconvert_no_validation ( Last six runs Aug2020 )

---------- Differences in errors ----------
1,3c1,5
< ------------------ net/edge[0]@from:
< Error: Attribute 'from' in definition of edge '1' is empty.
< Error: Edge's '1' from-node '' is not known.
---
> Error: no declaration found for element 'nodes'
>  In file 'input_nodes.nod.xml'
>  At line/column 2/132.
> 
> Error: No nodes loaded.
5,7c7,8
< ------------------ net/edge[1]@from:
< Error: Attribute 'from' in definition of edge '2' is empty.
< Error: Edge's '2' from-node '' is not known.
---
> Error: File 'correct.net.xml' is not accessible (No such file or directory).
> Error: No nodes loaded.
9,443d9
< ------------------ net/edge[0]@from:a
< Error: Edge's '1' from-node 'a' is not known.
< Quitting (on error).
< ------------------ net/edge[1]@from:a
< Error: Edge's '2' from-node 'a' is not known.
< Quitting (on error).
< ------------------ net/edge[0]@from:<remove>
< Error: Edge's '1' from-node '' is not known.
< Quitting (on error).
< ------------------ net/edge[1]@from:<remove>
< Error: Edge's '2' from-node '' is not known.
< Quitting (on error).
<truncated after showing first 30 lines>
---------- Differences in output ----------
2,3d1
< Success.
< Success.
6,63c4
< >>> ok...
< 
< Running broken net
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
< Success.
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : broken_nets sumo ( Last six runs Aug2020 )

---------- Differences in errors ----------
1,377c1,3
< ------------------ net/edge[0]@from:
< Error: Attribute 'from' in definition of edge '1' is empty.
< Error: An unknown lane ('1_0') was tried to be set as incoming to junction '2'.
< Error: Unknown from-edge '1' in connection.
< Error: Unknown from-edge '1' in connection.
< Error: Unknown from-node '' for edge '1'.
< Quitting (on error).
< ------------------ net/edge[1]@from:
< Error: Attribute 'from' in definition of edge '2' is empty.
< Error: An unknown lane ('2_0') was tried to be set as incoming to junction '3'.
< Error: Unknown to-edge '2' in connection.
< Error: Unknown to-edge '2' in connection.
< Error: Unknown from-node '' for edge '2'.
< Quitting (on error).
< ------------------ net/edge[0]@from:a
< Error: Unknown from-node 'a' for edge '1'.
< Quitting (on error).
< ------------------ net/edge[1]@from:a
< Error: Unknown from-node 'a' for edge '2'.
< Quitting (on error).
< ------------------ net/edge[0]@from:<remove>
< Error: Attribute 'from' is missing in definition of edge '1'.
< Error: An unknown lane ('1_0') was tried to be set as incoming to junction '2'.
< Error: Unknown from-edge '1' in connection.
< Error: Unknown from-edge '1' in connection.
< Error: Unknown from-node '' for edge '1'.
< Quitting (on error).
< ------------------ net/edge[1]@from:<remove>
< Error: Attribute 'from' is missing in definition of edge '2'.
<truncated after showing first 30 lines>
---------- Differences in output ----------
2d1
< Success.
5,7c4
< >>> ok...
< 
< Running broken net
---
> Error on processing the 'correct' network!

TEST FAILED on ts-sim-winbuild-ba : broken_nets sumo_no_validation ( Last six runs Aug2020 )

---------- Differences in errors ----------
1,6c1,5
< ------------------ net/edge[0]@from:
< Error: Attribute 'from' in definition of edge '1' is empty.
< Error: An unknown lane ('1_0') was tried to be set as incoming to junction '2'.
< Error: Unknown from-edge '1' in connection.
< Error: Unknown from-edge '1' in connection.
< Error: Unknown from-node '' for edge '1'.
---
> Error: no declaration found for element 'nodes'
>  In file 'input_nodes.nod.xml'
>  At line/column 2/132.
> 
> Error: No nodes loaded.
8,821c7
< ------------------ net/edge[1]@from:
< Error: Attribute 'from' in definition of edge '2' is empty.
< Error: An unknown lane ('2_0') was tried to be set as incoming to junction '3'.
< Error: Unknown to-edge '2' in connection.
< Error: Unknown to-edge '2' in connection.
< Error: Unknown from-node '' for edge '2'.
< Quitting (on error).
< ------------------ net/edge[0]@from:a
< Error: Unknown from-node 'a' for edge '1'.
< Quitting (on error).
< ------------------ net/edge[1]@from:a
< Error: Unknown from-node 'a' for edge '2'.
< Quitting (on error).
< ------------------ net/edge[0]@from:<remove>
< Error: Attribute 'from' is missing in definition of edge '1'.
< Error: An unknown lane ('1_0') was tried to be set as incoming to junction '2'.
<truncated after showing first 30 lines>
---------- Differences in output ----------
2d1
< Success.
5,7c4
< >>> ok...
< 
< Running broken net
---
> Error on processing the 'correct' network!

TEST FAILED on ts-sim-winbuild-ba : jtrrouter randomized_flow ( Last six runs Aug2020 )

---------- Differences in errors ----------
1,2c1,11
< Warning: The turn-file format with elements fromEdge, toEdge is deprecated, please use edgeRelation instead.
< Warning: The turn-file format with elements fromEdge, toEdge is deprecated, please use edgeRelation instead.
---
> Error: no declaration found for element 'turns'
>  In file 'input_turns.turns.xml'
>  At line/column 3/132.
> 
> Quitting (on error).
> Traceback (most recent call last):
>   File "C:/Users/delphi/Code/sumo/git/tests\..\tests/complex/jtrrouter/randomized_flow/runner.py", line 56, in <module>
>     route_lines1 = get_depart_lines(output_file1)
>   File "C:/Users/delphi/Code/sumo/git/tests\..\tests/complex/jtrrouter/randomized_flow/runner.py", line 35, in get_depart_lines
>     return [l for l in open(route_file) if 'depart' in l]
> IOError: [Errno 2] No such file or directory: 'output1.rou.xml'
---------- Differences in output ----------
1,3d0
< Success.
< Success.
< test passed. output is random

TEST FAILED on ts-sim-winbuild-ba : netconvert left_turn_noblocking_double_intersection ( Last six runs Aug2020 )

---------- Differences in errors ----------
1,2c1,12
< Warning: Intersecting left turns at junction 'cluster_node_C_node_C2' from lane 'edge_U2C2_0' and lane 'edge_D2C_0' (increase junction radius to avoid this).
< Warning: Intersecting left turns at junction 'cluster_node_C_node_C2' from lane 'edge_R2C2_0' and lane 'edge_L2C_0' (increase junction radius to avoid this).
---
> Error: no declaration found for element 'nodes'
>  In file 'input_nodes.nod.xml'
>  At line/column 2/132.
> 
> Error: No nodes loaded.
> Quitting (on error).
> Error: File 'joined.net.xml' is not accessible (No such file or directory).
> Quitting (on error).
> Traceback (most recent call last):
>   File "C:/Users/delphi/Code/sumo/git/tests\..\tests/complex/netconvert/left_turn_noblocking_double_intersection/runner.py", line 57, in <module>
>     for line in open(trips_output):
> IOError: [Errno 2] No such file or directory: 'trips.log'
---------- Differences in output ----------
1,2d0
< Success.
< test passed. no blocking occured

TEST FAILED on ts-sim-winbuild-ba : netconvert left_turn_noblocking_longveh ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,12
> Error: no declaration found for element 'nodes'
>  In file 'input_nodes.nod.xml'
>  At line/column 2/132.
> 
> Error: No nodes loaded.
> Quitting (on error).
> Error: File 'joined.net.xml' is not accessible (No such file or directory).
> Quitting (on error).
> Traceback (most recent call last):
>   File "C:/Users/delphi/Code/sumo/git/tests\..\tests/complex/netconvert/left_turn_noblocking_longveh/runner.py", line 57, in <module>
>     for line in open(trips_output):
> IOError: [Errno 2] No such file or directory: 'trips.log'
---------- Differences in output ----------
1,2d0
< Success.
< test passed. no blocking occured

TEST FAILED on ts-sim-winbuild-ba : netconvert matsim_roundtrip ( Last six runs Aug2020 )

---------- Differences in errors ----------
2,9c2,7
< Warning: Ambiguity in turnarounds computation at junction '294168098'.
< Warning: Ambiguity in turnarounds computation at junction '294168710'.
< Warning: Ambiguity in turnarounds computation at junction '294830184'.
< Warning: Ambiguity in turnarounds computation at junction '294830189'.
< Warning: Ambiguity in turnarounds computation at junction '294831560'.
< Warning: Intersecting left turns at junction '294830184' from lane '26843038#2_0' and lane '26843038#0_0' (increase junction radius to avoid this).
< Warning: Intersecting left turns at junction '294831560' from lane '26843133#2_0' and lane '-26843133#1_0' (increase junction radius to avoid this).
< Warning: 6 total messages of type: Ambiguity in turnarounds computation at junction '%'.
---
> Error: unable to connect socket for URL 'http://www.matsim.org/files/dtd/network_v1.dtd'
>  In file 'matsim'
>  At line/column 3/75.
> 
> Error: No nodes loaded.
> Quitting (on error).
---------- Differences in output ----------
2d1
< Success.
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="0.00,-19.68" convBoundary="0.00,0.00,1737.68,747.71" origBoundary="0.00,19.68,1737.68,767.39" projParameter="!"/>

    <edge id=":175648134_0" function="internal">
        <lane id=":175648134_0_0" index="0" speed="3.65" length="4.67" shape="15.89,149.97 14.59,149.33 14.09,148.59 14.39,147.74 15.47,146.79"/>
    </edge>
    <edge id=":261599791_0" function="internal">
        <lane id=":261599791_0_0" index="0" speed="27.78" length="0.23" shape="34.71,161.64 34.51,161.66"/>
        <lane id=":261599791_0_1" index="1" speed="27.78" length="0.23" shape="34.31,158.46 34.06,158.49"/>
    </edge>
    <edge id=":261599791_2" function="internal">
        <lane id=":261599791_2_0" index="0" speed="27.78" length="0.34" shape="33.15,152.16 33.52,152.11"/>
        <lane id=":261599791_2_1" index="1" speed="27.78" length="0.34" shape="33.60,155.33 33.91,155.28"/>
    </edge>
    <edge id=":261636677_0" function="internal">
        <lane id=":261636677_0_0" index="0" speed="13.89" length="5.43" shape="1122.01,93.47 1121.38,94.93 1120.80,95.87 1120.06,96.71 1118.96,97.89"/>
    </edge>
    <edge id=":261636677_1" function="internal">
        <lane id=":261636677_1_0" index="0" speed="5.27" length="6.17" shape="1122.01,93.47 1120.57,96.38 1119.43,97.03 1118.69,95.59"/>
    </edge>
    <edge id=":261636677_4" function="internal">
        <lane id=":261636677_4_0" index="0" speed="5.27" length="4.15" shape="1118.69,95.59 1118.59,95.40 1118.05,91.51"/>
    </edge>
    <edge id=":261636677_2" function="internal">
        <lane id=":261636677_2_0" index="0" speed="7.05" length="4.59" shape="1116.60,95.72 1117.30,94.79 1117.78,93.77 1118.03,92.68 1118.05,91.51"/>
    </edge>
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : netconvert opendrive_roundtrip ( Last six runs Aug2020 )

---------- Differences in errors ----------
2a3,6
> Error: no declaration found for element 'types'
>  In file 'input_types.typ.xml'
>  At line/column 2/132.
> 
4c8,15
< Warning: Found sharp turn with radius 1.08 at the end of edge '-823.0.00'.
---
> Warning: Edge '750' has no lanes.
> Warning: Edge '751' has no lanes.
> Warning: Edge '752' has no lanes.
> Warning: Edge '753' has no lanes.
> Warning: Edge '754' has no lanes.
> Error: No edges loaded.
> Quitting (on error).
> Warning: 191 total messages of type: Edge '%' has no lanes.
---------- Differences in output ----------
2d1
< Success.
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" rectangularLaneCut="true" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="0.02,-0.28" convBoundary="0.00,0.00,1738.51,765.99" origBoundary="-0.02,0.28,1740.72,766.26" projParameter="!"/>

    <type id="biking" priority="1" speed="22.22" allow="bicycle" width="1.50"/>
    <type id="driving" priority="1" speed="22.22" disallow="pedestrian" width="3.65"/>
    <type id="mwyEntry" priority="1" speed="22.22" disallow="pedestrian" width="3.65"/>
    <type id="mwyExit" priority="1" speed="22.22" disallow="pedestrian" width="3.65"/>
    <type id="parking" priority="1" speed="1.39" disallow="pedestrian" width="3.65"/>
    <type id="restricted" priority="1" speed="22.22" allow="pedestrian bicycle" width="1.50"/>
    <type id="sidewalk" priority="1" speed="22.22" allow="pedestrian" width="2.50"/>
    <type id="special1" priority="1" speed="22.22" disallow="pedestrian" width="3.65"/>
    <type id="stop" priority="1" speed="22.22" disallow="pedestrian" width="3.65"/>

    <edge id=":1_0" function="internal">
        <lane id=":1_0_0" index="0" disallow="pedestrian" speed="3.65" length="4.67" width="3.20" shape="471.07,47.45 471.77,46.19 472.53,45.72 473.36,46.05 474.26,47.18"/>
    </edge>
    <edge id=":10_0" function="internal">
        <lane id=":10_0_0" index="0" disallow="all" speed="11.11" length="22.90" width="3.20" shape="377.18,471.96 373.02,469.17 367.61,465.56 362.09,462.21 357.57,460.25"/>
    </edge>
    <edge id=":10_1" function="internal">
        <lane id=":10_1_0" index="0" disallow="all" speed="5.83" length="13.79" width="3.20" shape="377.18,471.96 375.07,469.09 375.37,465.77 377.55,463.25 381.09,462.80"/>
    </edge>
    <edge id=":10_2" function="internal">
        <lane id=":10_2_0" index="0" allow="pedestrian" speed="3.65" length="4.67" width="3.20" shape="377.18,471.96 376.60,470.64 376.68,469.75 377.45,469.29 378.89,469.25"/>
    </edge>
    <edge id=":10_3" function="internal">
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : netconvert osm_roundtrip ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,4
> Error: no declaration found for element 'types'
>  In file 'C:\Users\delphi\Code\sumo\git/data/typemap/osmNetconvert.typ.xml'
>  At line/column 2/132.
> 
1a6
> Warning: Discarding unusable type 'highway.residential' (first occurence for edge '5198584').
2a8
> Warning: Discarding unusable type 'highway.tertiary' (first occurence for edge '6137245').
4,5c10,11
< Warning: Discarding unusable type 'railway.construction' (first occurence for edge '11390634').
< Warning: Discarding unusable type 'highway.construction' (first occurence for edge '24154002').
---
> Warning: Discarding unknown compound 'highway.primary' in type 'cycleway.opposite_track|highway.primary' (first occurence for edge '7216737').
> Warning: Discarding unusable type 'cycleway.opposite_track|highway.primary' (first occurence for edge '7216737').
7,22c13,25
< Warning: Reducing junction cluster 283018817,38919652,38919712,38919808 (5 incoming edges).
< Warning: Minor green from edge '7216737#3' to edge '24214694' exceeds 19.44m/s. Maybe a left-turn lane is missing.
< Warning: Minor green from edge '-24214693#0' to edge '-7727483#3' exceeds 19.44m/s. Maybe a left-turn lane is missing.
< Warning: Minor green from edge '7727483#1' to edge '-7216737#3' exceeds 19.44m/s. Maybe a left-turn lane is missing.
< Warning: Minor green from edge '-24214694' to edge '24214693#0' exceeds 19.44m/s. Maybe a left-turn lane is missing.
< --- 
< +++ 
< @@ -977,7 +977,7 @@
<      <junction id="38919927" type="priority" x="297.39" y="446.01" incLanes="-6137233#0_0" intLanes="" shape="297.39,446.01 296.76,449.15 297.39,446.01">
<          <request index="0" response="0" foes="0"/>
<      </junction>
< -    <junction id="38920501" type="priority" x="495.47" y="311.99" incLanes="27441289_0 -7727483#0_0" intLanes="" shape="492.27,312.15 498.66,311.83 498.65,311.60">
< +    <junction id="38920501" type="priority" x="495.47" y="311.99" incLanes="27441289_0 -7727483#0_0" intLanes="" shape="492.27,312.13 498.66,311.82 498.65,311.57">
<          <request index="0" response="00" foes="00"/>
<truncated after showing first 30 lines>
---------- Differences in output ----------
1,2d0
< Success.
< Success.
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="-399345.66,-5809365.64" convBoundary="-1.27,0.00,1737.68,767.39" origBoundary="13.364829,52.424764,13.574340,52.459643" projParameter="+proj=utm +zone=33 +ellps=WGS84 +datum=WGS84 +units=m +no_defs"/>

    <type id="highway.bridleway" priority="1" numLanes="1" speed="2.78" allow="pedestrian" oneway="1" width="2.00"/>
    <type id="highway.bus_guideway" priority="1" numLanes="1" speed="27.78" allow="bus" oneway="1"/>
    <type id="highway.cycleway" priority="1" numLanes="1" speed="8.33" allow="bicycle" oneway="0" width="1.00"/>
    <type id="highway.footway" priority="1" numLanes="1" speed="2.78" allow="pedestrian" oneway="1" width="2.00"/>
    <type id="highway.ford" priority="1" numLanes="1" speed="2.78" allow="army" oneway="0"/>
    <type id="highway.living_street" priority="2" numLanes="1" speed="2.78" disallow="tram rail_urban rail rail_electric rail_fast ship" oneway="0"/>
    <type id="highway.motorway" priority="14" numLanes="2" speed="39.44" allow="private emergency authority army vip passenger hov taxi bus coach delivery truck trailer motorcycle evehicle custom1 custom2" oneway="1"/>
    <type id="highway.motorway_link" priority="9" numLanes="1" speed="22.22" allow="private emergency authority army vip passenger hov taxi bus coach delivery truck trailer motorcycle evehicle custom1 custom2" oneway="1"/>
    <type id="highway.path" priority="1" numLanes="1" speed="2.78" allow="pedestrian bicycle" oneway="1" width="2.00"/>
    <type id="highway.pedestrian" priority="1" numLanes="1" speed="2.78" allow="pedestrian" oneway="1" width="2.00"/>
    <type id="highway.primary" priority="12" numLanes="2" speed="27.78" disallow="tram rail_urban rail rail_electric rail_fast ship" oneway="0"/>
    <type id="highway.primary_link" priority="7" numLanes="1" speed="22.22" disallow="tram rail_urban rail rail_electric rail_fast ship" oneway="0"/>
    <type id="highway.raceway" priority="15" numLanes="2" speed="83.33" allow="vip" oneway="0"/>
    <type id="highway.residential" priority="3" numLanes="1" speed="13.89" disallow="tram rail_urban rail rail_electric rail_fast ship" oneway="0"/>
    <type id="highway.secondary" priority="11" numLanes="1" speed="27.78" disallow="tram rail_urban rail rail_electric rail_fast ship" oneway="0"/>
    <type id="highway.secondary_link" priority="6" numLanes="1" speed="22.22" disallow="tram rail_urban rail rail_electric rail_fast ship" oneway="0"/>
    <type id="highway.service" priority="1" numLanes="1" speed="5.56" allow="pedestrian delivery bicycle" oneway="0"/>
    <type id="highway.stairs" priority="1" numLanes="1" speed="1.39" allow="pedestrian" oneway="1" width="2.00"/>
    <type id="highway.step" priority="1" numLanes="1" speed="1.39" allow="pedestrian" oneway="1" width="2.00"/>
    <type id="highway.steps" priority="1" numLanes="1" speed="1.39" allow="pedestrian" oneway="1" width="2.00"/>
    <type id="highway.tertiary" priority="10" numLanes="1" speed="22.22" disallow="tram rail_urban rail rail_electric rail_fast ship" oneway="0"/>
    <type id="highway.tertiary_link" priority="5" numLanes="1" speed="22.22" disallow="tram rail_urban rail rail_electric rail_fast ship" oneway="0"/>
    <type id="highway.track" priority="1" numLanes="1" speed="5.56" disallow="tram rail_urban rail rail_electric rail_fast ship" oneway="0"/>
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : state diff_begin ( Last six runs Aug2020 )

---------- Differences in errors ----------
1c1,5
< Warning: State was written at a different time 50.00 than the begin time 10!
---
> Error: no declaration found for element 'snapshot'
>  In file 'state_50.00.xml.gz'
>  At line/column 25/181.
> 
> Quitting (on error).
---------- Differences in vehroutes ----------
5,12d4
<     <vehicle id="0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="174.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="1" type="DEFAULT_VEHTYPE" depart="5.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="176.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 

TEST FAILED on ts-sim-winbuild-ba : state disconnected ( Last six runs Aug2020 )

---------- Differences in errors ----------
5,8c5,9
< Warning: Teleporting vehicle '0'; waited too long (wrong lane), lane='4/1to3/1_0', time=332.00.
< Warning: Vehicle '0' ends teleporting on edge '2/1to1/1', time 332.00.
< Warning: Teleporting vehicle '1'; waited too long (wrong lane), lane='4/1to3/1_0', time=637.00.
< Warning: Vehicle '1' ends teleporting on edge '2/1to1/1', time 637.00.
---
> Error: no declaration found for element 'snapshot'
>  In file 'state.sbx'
>  At line/column 30/181.
> 
> Quitting (on error).
---------- Differences in vehroutes ----------
5,12d4
<     <vehicle id="0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="432.00">
<         <route edges="4/1to3/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="1" type="DEFAULT_VEHTYPE" depart="5.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="776.00">
<         <route edges="4/1to3/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 

TEST FAILED on ts-sim-winbuild-ba : state dists ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,5
> Error: no declaration found for element 'snapshot'
>  In file 'state.sbx'
>  At line/column 26/181.
> 
> Quitting (on error).
---------- Differences in vehroutes ----------
5,12d4
<     <vehicle id="0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="260.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="1" type="DEFAULT_VEHTYPE" depart="5.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="262.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 

TEST FAILED on ts-sim-winbuild-ba : state dists_gz ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,5
> Error: no declaration found for element 'snapshot'
>  In file 'state.gz'
>  At line/column 26/181.
> 
> Quitting (on error).
---------- Differences in vehroutes ----------
5,12d4
<     <vehicle id="0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="260.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="1" type="DEFAULT_VEHTYPE" depart="5.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="262.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 

2 TESTS FAILED on ts-sim-winbuild-ba :

---------- Differences in errors ----------
0a1,5
> Error: no declaration found for element 'snapshot'
>  In file 'state.xml'
>  At line/column 26/181.
> 
> Quitting (on error).
---------- Differences in vehroutes ----------
5,12d4
<     <vehicle id="0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="260.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="1" type="DEFAULT_VEHTYPE" depart="5.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="262.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 

TEST FAILED on ts-sim-winbuild-ba : state flow ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,5
> Error: no declaration found for element 'snapshot'
>  In file 'state.xml'
>  At line/column 26/181.
> 
> Quitting (on error).
---------- Differences in vehroutes ----------
5,59d4
<     <vehicle id="0.0" type="DEFAULT_VEHTYPE" depart="0.00" speedFactor="1.06" arrival="254.00">
<         <routeDistribution>
<             <route replacedOnEdge="" reason="device.rerouting" replacedAtTime="0.00" probability="0" edges="0/1to1/1 3/1to4/1"/>
<             <route edges="0/1to1/1 1/1to2/1 2/1to3/1 3/1to4/1"/>
<         </routeDistribution>
<     </vehicle>
< 
<     <vehicle id="0.1" type="DEFAULT_VEHTYPE" depart="10.00" speedFactor="0.94" arrival="260.00">
<         <routeDistribution>
<             <route replacedOnEdge="" reason="device.rerouting" replacedAtTime="10.00" probability="0" edges="0/1to1/1 3/1to4/1"/>
<             <route edges="0/1to1/1 1/1to2/1 2/1to3/1 3/1to4/1"/>
<         </routeDistribution>
<     </vehicle>
< 
<     <vehicle id="0.2" type="DEFAULT_VEHTYPE" depart="20.00" speedFactor="1.01" arrival="262.00">
<         <routeDistribution>
<             <route replacedOnEdge="" reason="device.rerouting" replacedAtTime="20.00" probability="0" edges="0/1to1/1 3/1to4/1"/>
<             <route edges="0/1to1/1 1/1to2/1 2/1to3/1 3/1to4/1"/>
<         </routeDistribution>
<     </vehicle>
< 
<     <vehicle id="0.3" type="DEFAULT_VEHTYPE" depart="30.00" speedFactor="1.08" arrival="264.00">
<         <routeDistribution>
<             <route replacedOnEdge="" reason="device.rerouting" replacedAtTime="30.00" probability="0" edges="0/1to1/1 3/1to4/1"/>
<             <route edges="0/1to1/1 1/1to2/1 2/1to3/1 3/1to4/1"/>
<         </routeDistribution>
<     </vehicle>
< 
<     <vehicle id="0.4" type="DEFAULT_VEHTYPE" depart="40.00" speedFactor="1.03" arrival="341.00">
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : state multique ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,5
> Error: no declaration found for element 'snapshot'
>  In file 'state.xml'
>  At line/column 27/184.
> 
> Quitting (on error).
---------- Differences in vehroutes ----------
5,40d4
<     <vehicle id="0.1" type="DEFAULT_VEHTYPE" depart="00:00:10" speedFactor="0.94" arrival="00:00:29">
<         <route edges="SC CW"/>
<     </vehicle>
< 
<     <vehicle id="0.2" type="DEFAULT_VEHTYPE" depart="00:00:20" speedFactor="1.01" arrival="00:00:38">
<         <route edges="SC CW"/>
<     </vehicle>
< 
<     <vehicle id="0.3" depart="00:00:30" arrival="00:00:48">
<         <route edges="SC CW"/>
<     </vehicle>
< 
<     <vehicle id="0.4" depart="00:00:40" arrival="00:01:39">
<         <route edges="SC CW"/>
<     </vehicle>
< 
<     <vehicle id="0.5" depart="00:00:50" arrival="00:01:42">
<         <route edges="SC CW"/>
<     </vehicle>
< 
<     <vehicle id="0.6" depart="00:01:00" arrival="00:01:45">
<         <route edges="SC CW"/>
<     </vehicle>
< 
<     <vehicle id="0.7" depart="00:01:10" arrival="00:01:47">
<         <route edges="SC CW"/>
<     </vehicle>
< 
<     <vehicle id="0.8" depart="00:01:20" arrival="00:01:49">
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : state plain ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,5
> Error: no declaration found for element 'snapshot'
>  In file 'state.sbx'
>  At line/column 26/181.
> 
> Quitting (on error).
---------- Differences in tls_state ----------
5,217d4
<     <tlsState time="50.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="51.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="52.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="53.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="54.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="55.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="56.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="57.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="58.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="59.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="60.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="61.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="62.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="63.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="64.00" id="0/0" programID="0" phase="2" state="GrGg"/>
<     <tlsState time="65.00" id="0/0" programID="0" phase="3" state="yryy"/>
<     <tlsState time="66.00" id="0/0" programID="0" phase="3" state="yryy"/>
<     <tlsState time="67.00" id="0/0" programID="0" phase="3" state="yryy"/>
<     <tlsState time="68.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<     <tlsState time="69.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<     <tlsState time="70.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<     <tlsState time="71.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<     <tlsState time="72.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<     <tlsState time="73.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<     <tlsState time="74.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<     <tlsState time="75.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<     <tlsState time="76.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<     <tlsState time="77.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<     <tlsState time="78.00" id="0/0" programID="0" phase="0" state="GgGr"/>
<truncated after showing first 30 lines>
---------- Differences in vehroutes ----------
5,13d4
<     <vehicle id="0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="260.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="1" type="DEFAULT_VEHTYPE" depart="5.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="262.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<         <stop lane="3/1to2/1_0" startPos="399.80" endPos="400.00" duration="10.00"/>
<     </vehicle>
< 

TEST FAILED on ts-sim-winbuild-ba : state prefix ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,5
> Error: no declaration found for element 'snapshot'
>  In file 'statep_50.00.xml.gz'
>  At line/column 26/181.
> 
> Quitting (on error).
---------- Differences in vehroutes ----------
5,12d4
<     <vehicle id="0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="260.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="1" type="DEFAULT_VEHTYPE" depart="5.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="262.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 

TEST FAILED on ts-sim-winbuild-ba : state rerouting ( Last six runs Aug2020 )

---------- Differences in errors ----------
9,14c9,13
< Warning: Teleporting vehicle 'veh70'; waited too long (yield), lane='gneE2_0', time=1073.00.
< Warning: Vehicle 'veh70' ends teleporting on edge 'gneE3', time 1073.00.
< Warning: Teleporting vehicle 'veh71'; waited too long (yield), lane='gneE2_0', time=1378.00.
< Warning: Vehicle 'veh71' ends teleporting on edge 'gneE3', time 1378.00.
< Warning: Teleporting vehicle 'veh72'; waited too long (yield), lane='gneE2_0', time=1684.00.
< Warning: Vehicle 'veh72' ends teleporting on edge 'gneE3', time 1684.00.
---
> Error: no declaration found for element 'snapshot'
>  In file 'state.xml'
>  At line/column 26/182.
> 
> Quitting (on error).
---------- Differences in vehroutes2 ----------
5,2258d4
<     <vehicle id="veh130" type="default" depart="395.00" departPos="1.00" arrivalPos="80.00" arrivalSpeed="0.00" speedFactor="1.01" arrival="500.00">
<         <routeDistribution>
<             <route replacedOnEdge="" reason="device.rerouting" replacedAtTime="130.00" probability="0" edges="gneE0 gneE3"/>
<             <route edges="gneE0 gneE4 gneE5 gneE3"/>
<         </routeDistribution>
<     </vehicle>
< 
<     <vehicle id="veh131" type="default" depart="399.00" departPos="1.00" arrivalPos="80.00" arrivalSpeed="0.00" speedFactor="1.03" arrival="504.00">
<         <routeDistribution>
<             <route replacedOnEdge="" reason="device.rerouting" replacedAtTime="131.00" probability="0" edges="gneE0 gneE3"/>
<             <route edges="gneE0 gneE4 gneE5 gneE3"/>
<         </routeDistribution>
<     </vehicle>
< 
<     <vehicle id="veh132" type="default" depart="403.00" departPos="1.00" arrivalPos="80.00" arrivalSpeed="0.00" speedFactor="1.07" arrival="507.00">
<         <routeDistribution>
<             <route replacedOnEdge="" reason="device.rerouting" replacedAtTime="132.00" probability="0" edges="gneE0 gneE3"/>
<             <route edges="gneE0 gneE4 gneE5 gneE3"/>
<         </routeDistribution>
<     </vehicle>
< 
<     <vehicle id="veh133" type="default" depart="407.00" departPos="1.00" arrivalPos="80.00" arrivalSpeed="0.00" speedFactor="0.96" arrival="511.00">
<         <routeDistribution>
<             <route replacedOnEdge="" reason="device.rerouting" replacedAtTime="133.00" probability="0" edges="gneE0 gneE3"/>
<             <route edges="gneE0 gneE4 gneE5 gneE3"/>
<         </routeDistribution>
<     </vehicle>
< 
<     <vehicle id="veh134" type="default" depart="412.00" departPos="1.00" arrivalPos="80.00" arrivalSpeed="0.00" speedFactor="1.04" arrival="515.00">
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : sumo ToCDevice ToC_with_sampled_responseTime ( Last six runs Aug2020 )

---------- Differences in fcd ----------
633c633
<         <vehicle id="ToC_veh" x="23.89" y="1421.69" angle="162.00" type="manual" speed="18.97" pos="92.56" lane="6/1to7/1_0" slope="0.00"/>
---
>         <vehicle id="ToC_veh" x="24.09" y="1421.09" angle="162.00" type="automated@ToC_veh" speed="19.60" pos="93.19" lane="6/1to7/1_0" slope="0.00"/>
636c636
<         <vehicle id="ToC_veh" x="29.68" y="1403.88" angle="162.00" type="manual" speed="18.73" pos="111.29" lane="6/1to7/1_0" slope="0.00"/>
---
>         <vehicle id="ToC_veh" x="30.14" y="1402.45" angle="162.00" type="automated@ToC_veh" speed="19.60" pos="112.79" lane="6/1to7/1_0" slope="0.00"/>
639c639
<         <vehicle id="ToC_veh" x="35.38" y="1386.34" angle="162.00" type="manual" speed="18.44" pos="129.73" lane="6/1to7/1_0" slope="0.00"/>
---
>         <vehicle id="ToC_veh" x="35.84" y="1384.91" angle="162.00" type="manual" speed="18.44" pos="131.23" lane="6/1to7/1_0" slope="0.00"/>
642c642
<         <vehicle id="ToC_veh" x="41.25" y="1368.27" angle="162.00" type="manual" speed="18.99" pos="148.73" lane="6/1to7/1_0" slope="0.00"/>
---
>         <vehicle id="ToC_veh" x="41.71" y="1366.85" angle="162.00" type="manual" speed="18.99" pos="150.23" lane="6/1to7/1_0" slope="0.00"/>
645c645
<         <vehicle id="ToC_veh" x="47.19" y="1349.98" angle="162.00" type="manual" speed="19.23" pos="167.96" lane="6/1to7/1_0" slope="0.00"/>
---
>         <vehicle id="ToC_veh" x="47.65" y="1348.56" angle="162.00" type="manual" speed="19.23" pos="169.46" lane="6/1to7/1_0" slope="0.00"/>
648c648
<         <vehicle id="ToC_veh" x="53.01" y="1332.09" angle="162.00" type="manual" speed="18.82" pos="186.77" lane="6/1to7/1_0" slope="0.00"/>
---
>         <vehicle id="ToC_veh" x="53.47" y="1330.66" angle="162.00" type="manual" speed="18.82" pos="188.27" lane="6/1to7/1_0" slope="0.00"/>
651c651
<         <vehicle id="ToC_veh" x="58.95" y="1313.79" angle="162.00" type="manual" speed="19.24" pos="206.01" lane="6/1to7/1_0" slope="0.00"/>
---
>         <vehicle id="ToC_veh" x="59.41" y="1312.36" angle="162.00" type="manual" speed="19.24" pos="207.51" lane="6/1to7/1_0" slope="0.00"/>
654c654
<         <vehicle id="ToC_veh" x="64.77" y="1295.87" angle="162.00" type="manual" speed="18.84" pos="224.85" lane="6/1to7/1_0" slope="0.00"/>
<truncated after showing first 30 lines>
---------- Differences in output ----------
1063,1065c1063,1065
<   currentAwareness = 0.25
<   currentSpeed = 18.9702641872
<   state = RECOVERING
---
>   currentAwareness = 1.00
>   currentSpeed = 19.6
>   state = PREPARING_TOC
1068,1070c1068,1070
<   currentAwareness = 0.35
<   currentSpeed = 18.7303032411
<   state = RECOVERING
---
>   currentAwareness = 1.00
>   currentSpeed = 19.6
>   state = PREPARING_TOC
1073c1073
<   currentAwareness = 0.45
---
>   currentAwareness = 0.25
1078c1078
<   currentAwareness = 0.55
---
>   currentAwareness = 0.35
1083c1083
<   currentAwareness = 0.65
---
>   currentAwareness = 0.45
1088c1088
<   currentAwareness = 0.75
<truncated after showing first 30 lines>
---------- Differences in tocs ----------
6c6
<     <ToCdown id="ToC_veh" t="209.00" lane="6/1to7/1_0" lanePos="73.59" x="18.03" y="1439.73"/>
---
>     <ToCdown id="ToC_veh" t="211.00" lane="6/1to7/1_0" lanePos="112.79" x="30.14" y="1402.45"/>

TEST FAILED on ts-sim-winbuild-ba : sumo ToCDevice dynamic_ToC ( Last six runs Aug2020 )

---------- Differences in output ----------
336,340c336,339
<   currentAwareness = 0.25
<   currentSpeed = 12.9180522858
<   state = RECOVERING
< Switched to manual mode: Allowing LCs!
< Time 52.0: Current lane of veh 'ToC_veh': WE_0
---
>   currentAwareness = 1.00
>   currentSpeed = 13.89
>   state = PREPARING_TOC
> Time 52.0: Current lane of veh 'ToC_veh': WE_1
343c342
<   currentAwareness = 0.35
---
>   currentAwareness = 0.25
350,351c349,350
<   currentAwareness = 0.45
<   currentSpeed = 13.3196243835
---
>   currentAwareness = 0.35
>   currentSpeed = 13.60330855
357,358c356,357
<   currentAwareness = 0.55
<   currentSpeed = 13.244425754
---
>   currentAwareness = 0.45
>   currentSpeed = 13.3196243835
364,365c363,364
<   currentAwareness = 0.65
<   currentSpeed = 13.8489023685
<truncated after showing first 30 lines>
---------- Differences in tocs ----------
6c6,7
<     <ToCdown id="ToC_veh" t="50.00" lane="WE_1" lanePos="650.16" x="1150.16" y="-1.60"/>
---
>     <TOR id="ToC_veh" t="45.00" lane="WE_1" lanePos="594.60" x="1094.60" y="-1.60"/>
>     <ToCdown id="ToC_veh" t="51.00" lane="WE_1" lanePos="664.05" x="1164.05" y="-1.60"/>

TEST FAILED on ts-sim-winbuild-ba : sumo ToCDevice dynamic_ToC_aborted ( Last six runs Aug2020 )

---------- Differences in output ----------
329,331c329,331
<   currentAwareness = 0.25
<   currentSpeed = 12.9180522858
<   state = RECOVERING
---
>   currentAwareness = 1.00
>   currentSpeed = 13.89
>   state = PREPARING_TOC
335c335
<   currentAwareness = 0.35
---
>   currentAwareness = 0.25
341c341
<   currentAwareness = 0.45
---
>   currentAwareness = 0.35
347c347
<   currentAwareness = 0.55
---
>   currentAwareness = 0.45
353c353
<   currentAwareness = 0.65
---
>   currentAwareness = 0.55
359c359
<   currentAwareness = 0.75
---
>   currentAwareness = 0.65
365c365
<   currentAwareness = 0.85
<truncated after showing first 30 lines>
---------- Differences in tocs ----------
6c6,7
<     <ToCdown id="ToC_veh" t="50.00" lane="WE_1" lanePos="650.16" x="1150.16" y="-1.60"/>
---
>     <TOR id="ToC_veh" t="45.00" lane="WE_1" lanePos="594.60" x="1094.60" y="-1.60"/>
>     <ToCdown id="ToC_veh" t="51.00" lane="WE_0" lanePos="664.05" x="1164.05" y="-4.80"/>

TEST FAILED on ts-sim-winbuild-ba : sumo ToCDevice dynamic_ToC_stop ( Last six runs Aug2020 )

---------- Differences in output ----------
537a538,543
>   currentAwareness = 1.00
>   currentSpeed = 0.0
>   state = PREPARING_TOC
> Time 87.0: Current lane of veh 'ToC_veh': WE_1
> time 87.0
> ToC device infos for vehicle 'ToC_veh'
542,543c548,549
< Time 87.0: Current lane of veh 'ToC_veh': WE_0
< time 87.0
---
> Time 88.0: Current lane of veh 'ToC_veh': WE_0
> time 88.0
549,550c555,556
< Time 88.0: Current lane of veh 'ToC_veh': :gneJ1_0_0
< time 88.0
---
> Time 89.0: Current lane of veh 'ToC_veh': :gneJ1_0_0
> time 89.0
556,557c562,563
< Time 89.0: Current lane of veh 'ToC_veh': :gneJ1_0_0
< time 89.0
---
> Time 90.0: Current lane of veh 'ToC_veh': :gneJ1_0_0
> time 90.0
563,564c569,570
< Time 90.0: Current lane of veh 'ToC_veh': NS_0
< time 90.0
---
> Time 91.0: Current lane of veh 'ToC_veh': NS_0
<truncated after showing first 30 lines>
---------- Differences in tocs ----------
6c6,7
<     <ToCdown id="ToC_veh" t="85.00" lane="WE_1" lanePos="992.80" x="1492.80" y="-1.60"/>
---
>     <TOR id="ToC_veh" t="80.00" lane="WE_1" lanePos="982.60" x="1482.60" y="-1.60"/>
>     <ToCdown id="ToC_veh" t="86.00" lane="WE_1" lanePos="992.80" x="1492.80" y="-1.60"/>

2 TESTS FAILED on ts-sim-winbuild-ba :

---------- Differences in errors ----------
1,16c1,8
< Warning: Speed of straight connection 'i2_0->i3_0' reduced by 5.29 due to turning radius of 13.45 (length=5.96, angle=41.99).
< Warning: Speed of straight connection 'i2_1->i3_1' reduced by 7.10 due to turning radius of 8.39 (length=3.58, angle=41.99).
< Warning: Speed of straight connection 'i2_2->i3_2' reduced by 9.61 due to turning radius of 3.33 (length=1.19, angle=41.99).
< Warning: Speed of straight connection 'i3_0->i4_0' reduced by 5.29 due to turning radius of 13.45 (length=5.96, angle=41.99).
< Warning: Speed of straight connection 'i3_1->i4_1' reduced by 7.10 due to turning radius of 8.39 (length=3.58, angle=41.99).
< Warning: 18 total messages of type: Speed of % connection '%' reduced by % due to turning radius of % (length=%, angle=%).
< Warning: Teleporting vehicle 'vehicle.582'; waited too long (jam), lane='i3_0', time=1605.00.
< Warning: Vehicle 'vehicle.582' ends teleporting on edge 'i4', time 1605.00.
< Warning: Teleporting vehicle 'vehicle.624'; waited too long (jam), lane='i2_0', time=1630.00.
< Warning: Vehicle 'vehicle.624' ends teleporting on edge 'i5', time 1779.00.
< Warning: Teleporting vehicle 'vehicle.561'; waited too long (jam), lane='i4_1', time=1897.00.
< Warning: Vehicle 'vehicle.561' ends teleporting on edge 'i5', time 1989.00.
< Warning: Teleporting vehicle 'vehicle.898'; waited too long (wrong lane), lane='i7_1', time=3286.00.
< Warning: Vehicle 'vehicle.898' ends teleporting on edge 'e3', time 3343.00.
< Warning: Teleporting vehicle 'vehicle.2009'; waited too long (jam), lane='i3_1', time=6150.00.
< Warning: Vehicle 'vehicle.2009' ends teleporting on edge 'i5', time 6286.00.
---
> Error: no declaration found for element 'nodes'
>  In file 'input_nodes.nod.xml'
>  At line/column 2/132.
> 
> Error: No nodes loaded.
> Quitting (on error).
> Error: File 'net.net.xml' is not accessible (No such file or directory).
> Quitting (on error).
---------- Differences in output ----------
1d0
< Success.
3,16d1
< Loading net-file from 'net.net.xml' ... done ((TIME)).
< Loading done.
< Simulation started with time: 0.00
< Reason: All vehicles have left the simulation.
< Performance: 
< Vehicles: 
<  Inserted: 3000
<  Running: 0
<  Waiting: 0
< Teleports: 5 (Jam: 4, Wrong Lane: 1)
< 
< -- Unordered text as found by filter '^Simulation ended at time:' --
< Simulation ended at time: 8795.00
< 
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="0.00,0.00" convBoundary="0.00,0.00,990.00,700.00" origBoundary="0.00,0.00,990.00,700.00" projParameter="!"/>

    <edge id=":f1_0" function="internal">
        <lane id=":f1_0_0" index="0" speed="8.27" length="6.71" shape="300.00,-8.00 301.71,-7.83 303.27,-7.34 304.68,-6.51 305.95,-5.35"/>
    </edge>
    <edge id=":f1_1" function="internal">
        <lane id=":f1_1_0" index="0" speed="6.54" length="4.02" shape="300.00,-4.80 301.02,-4.70 301.96,-4.40 302.81,-3.91 303.57,-3.21"/>
    </edge>
    <edge id=":f1_2" function="internal">
        <lane id=":f1_2_0" index="0" speed="4.15" length="1.34" shape="300.00,-1.60 300.34,-1.57 300.65,-1.47 300.94,-1.30 301.19,-1.07"/>
    </edge>
    <edge id=":f2_0" function="internal">
        <lane id=":f2_0_0" index="0" speed="8.60" length="3.58" shape="395.95,94.65 397.08,95.98 397.69,97.05 397.95,98.25 398.00,100.00"/>
        <lane id=":f2_0_1" index="1" speed="6.79" length="3.58" shape="393.57,96.79 394.25,97.59 394.62,98.23 394.77,98.95 394.80,100.00"/>
        <lane id=":f2_0_2" index="2" speed="4.28" length="3.58" shape="391.19,98.93 391.42,99.20 391.54,99.41 391.59,99.65 391.60,100.00"/>
    </edge>
    <edge id=":f3_0" function="internal">
        <lane id=":f3_0_0" index="0" speed="8.60" length="3.58" shape="398.00,300.00 397.95,301.75 397.69,302.95 397.08,304.02 395.95,305.35"/>
        <lane id=":f3_0_1" index="1" speed="6.79" length="3.58" shape="394.80,300.00 394.77,301.05 394.62,301.77 394.25,302.41 393.57,303.21"/>
        <lane id=":f3_0_2" index="2" speed="4.28" length="3.58" shape="391.60,300.00 391.59,300.35 391.54,300.59 391.42,300.80 391.19,301.07"/>
    </edge>
    <edge id=":f4_0" function="internal">
        <lane id=":f4_0_0" index="0" speed="8.27" length="6.71" shape="305.95,405.35 304.68,406.51 303.27,407.34 301.71,407.83 300.00,408.00"/>
    </edge>
    <edge id=":f4_1" function="internal">
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : sumo binary ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,16
> Error: no declaration found for element 'nodes'
>  In file 'input_nodes.nod.xml'
>  At line/column 3/132.
> 
> Error: No nodes loaded.
> Quitting (on error).
> Error: no declaration found for element 'nodes'
>  In file 'input_nodes.nod.xml'
>  At line/column 3/132.
> 
> Error: No nodes loaded.
> Quitting (on error).
> Error: The network file 'circular.net.xml' is not accessible.
> Quitting (on error).
> Error: File 'circular.net.xml.gz' is not accessible (No such file or directory).
> Quitting (on error).
---------- Differences in output ----------
3d2
< Success.
6d4
< Success.
8d5
< Success.

TEST FAILED on ts-sim-winbuild-ba : sumo envVarSubstitution ( Last six runs Aug2020 )

---------- Differences in output ----------
2c2,3
< Step #0.00 ((TIME) ?*RT. ?UPS, vehicles TOT 0 ACT 0 BUF 0)                                   
---
> Step #0.00 ((TIME) ~= 1000.00*RT, ~0.00UPS, vehicles TOT 0 ACT 0 BUF 0)                      
> 

TEST FAILED on ts-sim-winbuild-ba : sumo extended rerouter ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,15
> Error: no declaration found for element 'nodes'
>  In file 'input_nodes.nod.xml'
>  At line/column 2/132.
> 
> Error: No nodes loaded.
> Quitting (on error).
> Error: File 'three_split.net.xml' is not accessible (No such file or directory).
> Quitting (on error).
> Traceback (most recent call last):
>   File "C:/Users/delphi/Code/sumo/git/tests\..\tests/complex/sumo/extended/rerouter/runner.py", line 178, in <module>
>     "vehroutes.xml", ["vehicle"], {'route': ['exitTimes', 'edges']}))
>   File "C:/Users/delphi/Code/sumo/git/tests\..\tests/complex/sumo/extended/rerouter\..\..\..\..\..\tools\sumolib\xml.py", line 245, in parse
>     for _, parsenode in ET.iterparse(_open(xmlfile, None)):
>   File "<string>", line 70, in __init__
> IOError: [Errno 2] No such file or directory: 'vehroutes.xml'
---------- Differences in output ----------
3d2
< Success.
9,264d7
<      Checking with embedded rerouter definition: False
<     Checking with multi-referenced routes: False
<      Checking with embedded rerouter definition: True
<      Checking with embedded rerouter definition: False
<   Checking for simulation begin=0, rerouter starts at 100, ends at 86400
<     Checking with multi-referenced routes: True
<      Checking with embedded rerouter definition: True
<      Checking with embedded rerouter definition: False
<     Checking with multi-referenced routes: False
<      Checking with embedded rerouter definition: True
<      Checking with embedded rerouter definition: False
<   Checking for simulation begin=100, rerouter starts at 0, ends at 86400
<     Checking with multi-referenced routes: True
<      Checking with embedded rerouter definition: True
<      Checking with embedded rerouter definition: False
<     Checking with multi-referenced routes: False
<      Checking with embedded rerouter definition: True
<      Checking with embedded rerouter definition: False
<   Checking for simulation begin=0, rerouter starts at 50, ends at 100
<     Checking with multi-referenced routes: True
<      Checking with embedded rerouter definition: True
<      Checking with embedded rerouter definition: False
<     Checking with multi-referenced routes: False
<      Checking with embedded rerouter definition: True
<      Checking with embedded rerouter definition: False
<   Checking for simulation begin=50, rerouter starts at 50, ends at 100
<     Checking with multi-referenced routes: True
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : sumo lane_change best_lanes ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,11
> Error: no declaration found for element 'nodes'
>  In file 'C:/Users/delphi/Code/sumo/git/tests\..\tests/complex/sumo/lane_change/best_lanes\data/acosta_busStopNeedsChange#1\input_nodes.nod.xml'
>  At line/column 2/132.
> 
> Error: No nodes loaded.
> Quitting (on error).
> Error: File 'input_net.net.xml' is not accessible (No such file or directory).
> Quitting (on error).
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
---------- Differences in output ----------
2d1
< Success.
4,103d2
< lane -1000+0.-500+0_0:
<   length: 1953.6
<   offset: 0
<   allowsContinuation: True
<   over: ('-1000+0.-500+0_0', '-500+0.+0+0_1', '+0+0.+500+0_1', '+500+0.+1000+0_1')
< lane 0 ok
< ----------------------------------------------------------------------
< 
< -- Test: acosta_busStopNeedsChange#2
< Success.
< Loading configuration ... done.
< lane -500+0.+0+0_0:
<   length: 479.2
<   offset: 1
<   allowsContinuation: False
<   over: ('-500+0.+0+0_0',)
< lane -500+0.+0+0_1:
<   length: 1457.6
<   offset: 0
<   allowsContinuation: True
<   over: ('-500+0.+0+0_1', '+0+0.+500+0_1', '+500+0.+1000+0_1')
< lane -500+0.+0+0_2:
<   length: 479.2
<   offset: -1
<   allowsContinuation: False
<   over: ('-500+0.+0+0_2',)
< lane 0 ok
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : sumo ringNoBrake ( Last six runs Aug2020 )

---------- Differences in errors ----------
1,7c1,11
< Warning: Starting TraCI without using internal lanes!
< Vehicles will jump over junctions.
< Use without option --no-internal-links to avoid unexpected behavior
< Warning: Network contains internal links but option --no-internal-links is set. Vehicles will 'jump' across junctions and thus underestimate route lengths and travel times.
< Warning: Starting TraCI without using internal lanes!
< Vehicles will jump over junctions.
< Use without option --no-internal-links to avoid unexpected behavior
---
> Error: no declaration found for element 'nodes'
>  In file 'input_nodes.nod.xml'
>  At line/column 3/132.
> 
> Error: No nodes loaded.
> Quitting (on error).
> Error: File 'circular.net.xml' is not accessible (No such file or directory).
> Quitting (on error).
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
---------- Differences in output ----------
3d2
< Success.
6,15d4
< Loading configuration ... done.
< >>> Checking Simulation (network: internal, simulation: no internal)
< 
< >>> Building the network (without internal)
< Loading configuration ... done.
< Success.
< Loading configuration ... done.
< >>> Checking Simulation (network: no internal, simulation: internal)
< Loading configuration ... done.
< >>> Checking Simulation (network: no internal, simulation: no internal)

TEST FAILED on ts-sim-winbuild-ba : traas webservice ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,32
> Exception in thread "main" java.lang.IllegalStateException: DOMStreamReader: Calling next() at END_DOCUMENT
> 	at com.sun.xml.internal.ws.streaming.DOMStreamReader._next(DOMStreamReader.java:764)
> 	at com.sun.xml.internal.ws.streaming.DOMStreamReader.next(DOMStreamReader.java:737)
> 	at com.sun.xml.internal.ws.util.xml.XMLStreamReaderToXMLStreamWriter.bridge(XMLStreamReaderToXMLStreamWriter.java:92)
> 	at com.sun.tools.internal.ws.util.WSDLFetcher.fetchFile(WSDLFetcher.java:121)
> 	at com.sun.tools.internal.ws.util.WSDLFetcher.fetchWsdls(WSDLFetcher.java:86)
> 	at com.sun.tools.internal.ws.wscompile.WsimportTool.buildWsdlModel(WsimportTool.java:437)
> 	at com.sun.tools.internal.ws.wscompile.WsimportTool.run(WsimportTool.java:190)
> 	at com.sun.tools.internal.ws.wscompile.WsimportTool.run(WsimportTool.java:168)
> 	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> 	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
> 	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
> 	at java.lang.reflect.Method.invoke(Method.java:497)
> 	at com.sun.tools.internal.ws.Invoker.invoke(Invoker.java:159)
> 	at com.sun.tools.internal.ws.WsImport.main(WsImport.java:42)
> data/Main.java:23: error: cannot find symbol
> import de.tudresden.ws.TraasWS;
>                       ^
>   symbol:   class TraasWS
>   location: package de.tudresden.ws
> data/Main.java:34: error: cannot find symbol
>         ServiceImpl ws = new TraasWS().getServiceImplPort();
>                              ^
>   symbol:   class TraasWS
>   location: class Main
> data/Main.java:46: error: cannot find symbol
>             ws.vehicleAdd("v" + i, "car", "r1", 0, 0, 13.8, (byte) 1);
>               ^
>   symbol:   method vehicleAdd(String,String,String,int,int,double,byte)
<truncated after showing first 30 lines>
---------- Differences in output ----------
4a5
> [ERROR] Server returned HTTP response code: 403 for URL: http://127.0.0.1:8080/TRAAS_WS?wsdl
6c7
< Die WSDL und die zugehörigen Metadaten werden heruntergeladen
---
> Schemadokument http://127.0.0.1:8080/TRAAS_WS?wsdl konnte nicht gelesen werden, da 1) das Dokument nicht gefunden werden konnte; 2) das Dokument nicht gelesen werden konnte; 3) das Root-Element des Dokuments nicht <wsdl:definitions> ist.
9c10
< Code wird generiert ...
---
> [ERROR] failed.noservice=wsdl:service konnte in den angegebenen WSDLs nicht gefunden werden: 
10a12
>  Mindestens eine WSDL mit mindestens einer Servicedefinition muss bereitgestellt werden.
12d13
< Code wird kompiliert ...
13a15
> 	WSDL konnte nicht geparst werden.
15c17
< Die generierten Artefakte werden in ./webservice.jar archiviert.
---
> Die WSDL und die zugehörigen Metadaten werden heruntergeladen
17d18
< Benutzer user startet den Sumo Webservice Service

TEST FAILED on ts-sim-winbuild-ba : traci bugs ticket3505 ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,8
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 30/181.
> 
> Quitting (on error).
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
---------- Differences in output ----------
5d4
< 300
---------- Differences in vehroutes ----------
5,16d4
<     <vehicle id="veh0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="261.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="veh1" type="t1" depart="10.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="263.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="veh2" type="t2" depart="20.00" departPos="100.00" departSpeed="10.00" speedFactor="1.01" arrival="266.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 

TEST FAILED on ts-sim-winbuild-ba : traci bugs ticket3505_test_with_begin_ge_savetime ( Last six runs Aug2020 )

---------- Differences in errors ----------
1c1,8
< Warning: State was written at a different time 50.00 than the begin time 60!
---
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 30/181.
> 
> Quitting (on error).
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
---------- Differences in output ----------
5d4
< 300
---------- Differences in vehroutes ----------
5,16d4
<     <vehicle id="veh0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="261.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="veh1" type="t1" depart="10.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="263.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="veh2" type="t2" depart="20.00" departPos="100.00" departSpeed="10.00" speedFactor="1.01" arrival="266.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 

TEST FAILED on ts-sim-winbuild-ba : traci bugs ticket3505_with_load_offset ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,8
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 30/181.
> 
> Quitting (on error).
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
---------- Differences in output ----------
5d4
< 300.0
---------- Differences in vehroutes ----------
5,16d4
<     <vehicle id="veh0" type="DEFAULT_VEHTYPE" depart="100.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="261.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="veh1" type="t1" depart="110.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="263.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="veh2" type="t2" depart="120.00" departPos="100.00" departSpeed="10.00" speedFactor="1.01" arrival="266.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 

TEST FAILED on ts-sim-winbuild-ba : traci bugs ticket3522 ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,8
> Error: no declaration found for element 'snapshot'
>  In file 'state.xml'
>  At line/column 30/181.
> 
> Quitting (on error).
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
---------- Differences in output ----------
18,34d17
< Get after load....
< vtype
< 1.0 == 1.0
< 1.0 == 1.0
< 2.0 == 2.0
< 3.0 == 3.0
< 6.0 == 6.0
< 7.0 == 7.0
< 1.3 == 1.3
< vehicle
< 1.0 == 1.0
< 1.0 == 1.0
< 2.0 == 2.0
< 3.0 == 3.0
< 6.0 == 6.0
< 7.0 == 7.0
< 1.3 == 1.3
---------- Differences in vehroutes ----------
5,16d4
<     <vehicle id="veh0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="270.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="veh1" type="t1" depart="10.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="276.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="veh2" type="t2@veh2" depart="20.00" departPos="100.00" departSpeed="10.00" speedFactor="1.01" arrival="282.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 

TEST FAILED on ts-sim-winbuild-ba : traci connection clientCloses sumo ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,8
> Error: no character data is allowed by content model
>  In file 'input_routes.rou.xml'
>  At line/column 3/4.
> 
> Quitting (on error).
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
---------- Differences in output ----------
4,21d3
< Print ended at step 100
< ----------- SUMO end time is not given -----------
< Loading configuration ... done.
< Print ended at step 100
< =========== empty routes in SUMO ===========
< ----------- SUMO end time is smaller than TraCI's -----------
< Loading configuration ... done.
< Print ended at step 100
< ----------- SUMO end time is not given -----------
< Loading configuration ... done.
< Print ended at step 100
< =========== vehicle leaves before TraCI ends ===========
< ----------- SUMO end time is smaller than TraCI's -----------
< Loading configuration ... done.
< Print ended at step 100
< ----------- SUMO end time is not given -----------
< Loading configuration ... done.
< Print ended at step 100

TEST FAILED on ts-sim-winbuild-ba : traci connection clientCloses sumo-gui ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,3
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
---------- Differences in output ----------
4,21d3
< Print ended at step 100
< ----------- SUMO end time is not given -----------
< Loading configuration ... done.
< Print ended at step 100
< =========== empty routes in SUMO ===========
< ----------- SUMO end time is smaller than TraCI's -----------
< Loading configuration ... done.
< Print ended at step 100
< ----------- SUMO end time is not given -----------
< Loading configuration ... done.
< Print ended at step 100
< =========== vehicle leaves before TraCI ends ===========
< ----------- SUMO end time is smaller than TraCI's -----------
< Loading configuration ... done.
< Print ended at step 100
< ----------- SUMO end time is not given -----------
< Loading configuration ... done.
< Print ended at step 100

TEST FAILED on ts-sim-winbuild-ba : traci gui gui ( Last six runs Aug2020 )

---------- Differences in png ----------
Binary files C:/Users/delphi/Code/sumo/msvc12x64Dtexttesttmp/msvc12x64D.08Aug043707.4908/complex/traci/gui/gui/framework_tmp/png.complexorigcmp and C:/Users/delphi/Code/sumo/msvc12x64Dtexttesttmp/msvc12x64D.08Aug043707.4908/complex/traci/gui/gui/framework_tmp/png.complexcmp differ

2 TESTS FAILED on ts-sim-winbuild-ba :

---------- Differences in errors ----------
0a1,8
> Error: attribute 'speeFactor' is not declared for element 'vType'
>  In file 'input_routes.rou.xml'
>  At line/column 5/69.
> 
> Quitting (on error).
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
---------- Differences in output ----------
1,99d0
< findIntermodalRoute modes='car bicycle public' vType=' pType=''
<   Stage(type=3, vType=DEFAULT_VEHTYPE, line=car, edges=('A0B0', 'B0B1', 'B1A1', 'A1B1'), travelTime=126.216342693, cost=126.216342693, length=3571.04, intended=car, depart=1.0, departPos=894.8, arrivalPos=987.6)
< 
< findIntermodalRoute modes='car bicycle public' vType=defaultCar' pType=''
<   Stage(type=3, vType=defaultCar, line=defaultCar, edges=('A0B0', 'B0B1', 'B1A1', 'A1B1'), travelTime=126.216342693, cost=126.216342693, length=3571.04, intended=defaultCar, depart=1.0, departPos=894.8, arrivalPos=987.6)
< 
< findIntermodalRoute modes='car bicycle public' vType=slowCar' pType=''
<   Stage(type=3, vType=DEFAULT_VEHTYPE, line=car, edges=('A0B0', 'B0B1', 'B1A1', 'A1B1'), travelTime=126.216342693, cost=126.216342693, length=3571.04, intended=car, depart=1.0, departPos=894.8, arrivalPos=987.6)
< 
< findIntermodalRoute modes='car bicycle public' vType=slowCarFactor' pType=''
<   Stage(type=3, vType=DEFAULT_VEHTYPE, line=car, edges=('A0B0', 'B0B1', 'B1A1', 'A1B1'), travelTime=126.216342693, cost=126.216342693, length=3571.04, intended=car, depart=1.0, departPos=894.8, arrivalPos=987.6)
< 
< findIntermodalRoute modes='car bicycle public' vType=fastCar' pType=''
<   Stage(type=3, vType=fastCar, line=fastCar, edges=('A0B0', 'B0B1', 'B1A1', 'A1B1'), travelTime=65.3581713463, cost=65.3581713463, length=3571.04, intended=fastCar, depart=1.0, departPos=894.8, arrivalPos=987.6)
< 
< 
< 
< findIntermodalRoute modes='public' vType=' pType=''
<   Stage(type=2, destStop=stopC_W, edges=('A0B0', 'accessC'), travelTime=181.27776, cost=181.27776, length=2194.03, depart=1.0, departPos=894.8, arrivalPos=91.9)
<   Stage(type=3, line=train2:1, destStop=stopA_W, edges=('railEW',), travelTime=559.72296, cost=559.72296, length=2392.8, intended=train_train2:1.0, depart=599.0, departPos=0.0, arrivalPos=1100.0)
<   Stage(type=2, destStop=stopA_N, edges=('accessA',), travelTime=3.80256, cost=3.80256, length=1603.96, depart=742.00072, departPos=86.23, arrivalPos=90.19)
<   Stage(type=3, line=train1:0, destStop=stopB_N, edges=('railSN',), travelTime=355.19796, cost=355.19796, length=1192.8, intended=train_train1:0.1, depart=1001.0, departPos=0.0, arrivalPos=500.0)
<   Stage(type=2, edges=('accessB', 'A1B1'), travelTime=203.9232, cost=203.9232, length=2087.62, depart=1101.00124, departPos=91.16, arrivalPos=987.6)
< 
< findIntermodalRoute modes='public' vType=defaultCar' pType=''
<   Stage(type=3, vType=defaultCar, line=defaultCar, edges=('A0B0', 'B0B1', 'B1A1', 'A1B1'), travelTime=126.216342693, cost=126.216342693, length=3571.04, intended=defaultCar, depart=1.0, departPos=894.8, arrivalPos=987.6)
< 
< findIntermodalRoute modes='public' vType=slowCar' pType=''
<   Stage(type=2, destStop=stopC_W, edges=('A0B0', 'accessC'), travelTime=181.27776, cost=181.27776, length=2194.03, depart=1.0, departPos=894.8, arrivalPos=91.9)
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : traci simulation loadState busStop ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,23
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 21/181.
> 
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 21/181.
> 
> Error: Answered with error to command 0xab: Loading state from 'input_state.xml' failed.
> Traceback (most recent call last):
>   File "C:/Users/delphi/Code/sumo/git/tests\..\tests/complex/traci/simulation/loadState/busStop/runner.py", line 40, in <module>
>     traci.simulation.loadState("input_state.xml")
>   File "C:\Users\delphi\Code\sumo\git\tools\traci\_simulation.py", line 430, in loadState
>     self._setCmd(tc.CMD_LOAD_SIMSTATE, "", "s", fileName)
>   File "C:\Users\delphi\Code\sumo\git\tools\traci\domain.py", line 184, in _setCmd
>     self._connection._sendCmd(self._cmdSetID, varID, objectID, format, *values)
>   File "C:\Users\delphi\Code\sumo\git\tools\traci\connection.py", line 178, in _sendCmd
>     return self._sendExact()
>   File "C:\Users\delphi\Code\sumo\git\tools\traci\connection.py", line 95, in _sendExact
>     raise TraCIException(err, prefix[1], _RESULTS[prefix[2]])
> traci.exceptions.TraCIException: Loading state from 'input_state.xml' failed.
> Error: tcpip::Socket::recvAndCheck @ recv: Socket reset by peer
> Quitting (on error).
---------- Differences in tripinfo ----------
5,14d4
<     <tripinfo id="1" depart="60.00" departLane="WC_0" departPos="5.10" departSpeed="0.00" departDelay="0.00" arrival="94.00" arrivalLane="CE_1" arrivalPos="91.95" arrivalSpeed="8.25" duration="34.00" routeLength="194.90" waitingTime="1.00" waitingCount="1" stopTime="10.00" timeLoss="8.88" rerouteNo="1" devices="tripinfo_1 routing_1" vType="DEFAULT_VEHTYPE" speedFactor="0.94" vaporized=""/>
<     <tripinfo id="1" depart="60.00" departLane="WC_0" departPos="5.10" departSpeed="0.00" departDelay="0.00" arrival="95.00" arrivalLane="CE_1" arrivalPos="91.95" arrivalSpeed="10.19" duration="35.00" routeLength="194.90" waitingTime="1.00" waitingCount="1" stopTime="10.00" timeLoss="9.37" rerouteNo="1" devices="tripinfo_1 routing_1" vType="DEFAULT_VEHTYPE" speedFactor="0.94" vaporized=""/>
<     <tripinfo id="1" depart="60.00" departLane="WC_0" departPos="5.10" departSpeed="0.00" departDelay="0.00" arrival="96.00" arrivalLane="CE_1" arrivalPos="91.95" arrivalSpeed="8.73" duration="36.00" routeLength="194.90" waitingTime="1.00" waitingCount="1" stopTime="10.00" timeLoss="10.51" rerouteNo="1" devices="tripinfo_1 routing_1" vType="DEFAULT_VEHTYPE" speedFactor="0.94" vaporized=""/>
<     <tripinfo id="1" depart="60.00" departLane="WC_0" departPos="5.10" departSpeed="0.00" departDelay="0.00" arrival="96.00" arrivalLane="CE_1" arrivalPos="91.95" arrivalSpeed="9.38" duration="36.00" routeLength="194.90" waitingTime="2.00" waitingCount="1" stopTime="10.00" timeLoss="10.46" rerouteNo="1" devices="tripinfo_1 routing_1" vType="DEFAULT_VEHTYPE" speedFactor="0.94" vaporized=""/>
<     <tripinfo id="1" depart="60.00" departLane="WC_0" departPos="5.10" departSpeed="0.00" departDelay="0.00" arrival="96.00" arrivalLane="CE_1" arrivalPos="91.95" arrivalSpeed="8.74" duration="36.00" routeLength="194.90" waitingTime="1.00" waitingCount="1" stopTime="10.00" timeLoss="10.47" rerouteNo="1" devices="tripinfo_1 routing_1" vType="DEFAULT_VEHTYPE" speedFactor="0.94" vaporized=""/>
<     <tripinfo id="1" depart="60.00" departLane="WC_0" departPos="5.10" departSpeed="0.00" departDelay="0.00" arrival="95.00" arrivalLane="CE_1" arrivalPos="91.95" arrivalSpeed="8.93" duration="35.00" routeLength="194.90" waitingTime="1.00" waitingCount="1" stopTime="10.00" timeLoss="9.76" rerouteNo="1" devices="tripinfo_1 routing_1" vType="DEFAULT_VEHTYPE" speedFactor="0.94" vaporized=""/>
<     <tripinfo id="1" depart="60.00" departLane="WC_0" departPos="5.10" departSpeed="0.00" departDelay="0.00" arrival="94.00" arrivalLane="CE_1" arrivalPos="91.95" arrivalSpeed="7.86" duration="34.00" routeLength="194.90" waitingTime="1.00" waitingCount="1" stopTime="10.00" timeLoss="8.92" rerouteNo="1" devices="tripinfo_1 routing_1" vType="DEFAULT_VEHTYPE" speedFactor="0.94" vaporized=""/>
<     <tripinfo id="1" depart="60.00" departLane="WC_0" departPos="5.10" departSpeed="0.00" departDelay="0.00" arrival="95.00" arrivalLane="CE_1" arrivalPos="91.95" arrivalSpeed="8.55" duration="35.00" routeLength="194.90" waitingTime="1.00" waitingCount="1" stopTime="10.00" timeLoss="9.48" rerouteNo="1" devices="tripinfo_1 routing_1" vType="DEFAULT_VEHTYPE" speedFactor="0.94" vaporized=""/>
<     <tripinfo id="1" depart="60.00" departLane="WC_0" departPos="5.10" departSpeed="0.00" departDelay="0.00" arrival="94.00" arrivalLane="CE_1" arrivalPos="91.95" arrivalSpeed="8.66" duration="34.00" routeLength="194.90" waitingTime="1.00" waitingCount="1" stopTime="10.00" timeLoss="8.96" rerouteNo="1" devices="tripinfo_1 routing_1" vType="DEFAULT_VEHTYPE" speedFactor="0.94" vaporized=""/>
<     <tripinfo id="1" depart="60.00" departLane="WC_0" departPos="5.10" departSpeed="0.00" departDelay="0.00" arrival="94.00" arrivalLane="CE_1" arrivalPos="91.95" arrivalSpeed="7.58" duration="34.00" routeLength="194.90" waitingTime="1.00" waitingCount="1" stopTime="10.00" timeLoss="9.07" rerouteNo="1" devices="tripinfo_1 routing_1" vType="DEFAULT_VEHTYPE" speedFactor="0.94" vaporized=""/>

TEST FAILED on ts-sim-winbuild-ba : traci simulation loadState detectors ( Last six runs Aug2020 )

---------- Differences in detector ----------
5,7d4
<     <interval begin="0.00" end="11.00" id="d1" nVehContrib="1" flow="327.27" occupancy="3.67" speed="12.37" harmonicMeanSpeed="12.37" length="5.00" nVehEntered="1"/>
<    <interval begin="0.00" end="11.00" id="d2" sampledSeconds="4.96" nVehEntered="1" nVehLeft="1" nVehSeen="1" meanSpeed="11.08" meanTimeLoss="1.23" meanOccupancy="3.42" maxOccupancy="10.00" meanMaxJamLengthInVehicles="0.00" meanMaxJamLengthInMeters="0.00" maxJamLengthInVehicles="0" maxJamLengthInMeters="0.00" jamLengthInVehiclesSum="0" jamLengthInMetersSum="0.00" meanHaltingDuration="0.00" maxHaltingDuration="0.00" haltingDurationSum="0.00" meanIntervalHaltingDuration="0.00" maxIntervalHalting
Duration="0.00" intervalHaltingDurationSum="0.00" startedHalts="0.00" meanVehicleNumber="0.50" maxVehicleNumber="1" />
<    <interval begin="0.00" end="11.00" id="d3" meanTravelTime="4.93" meanOverlapTravelTime="5.46" meanSpeed="10.66" meanHaltsPerVehicle="0.00" meanTimeLoss="0.70" vehicleSum="1" meanSpeedWithin="-1.00" meanHaltsPerVehicleWithin="-1.00" meanDurationWithin="-1.00" vehicleSumWithin="0" meanIntervalSpeedWithin="-1.00" meanIntervalHaltsPerVehicleWithin="-1.00" meanIntervalDurationWithin="-1.00" meanTimeLossWithin="-1.00"/>
---------- Differences in errors ----------
0a1,23
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 20/180.
> 
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 20/180.
> 
> Error: Answered with error to command 0xab: Loading state from 'input_state.xml' failed.
> Traceback (most recent call last):
>   File "C:/Users/delphi/Code/sumo/git/tests\..\tests/complex/traci/simulation/loadState/detectors/runner.py", line 40, in <module>
>     traci.simulation.loadState("input_state.xml")
>   File "C:\Users\delphi\Code\sumo\git\tools\traci\_simulation.py", line 430, in loadState
>     self._setCmd(tc.CMD_LOAD_SIMSTATE, "", "s", fileName)
>   File "C:\Users\delphi\Code\sumo\git\tools\traci\domain.py", line 184, in _setCmd
>     self._connection._sendCmd(self._cmdSetID, varID, objectID, format, *values)
>   File "C:\Users\delphi\Code\sumo\git\tools\traci\connection.py", line 178, in _sendCmd
>     return self._sendExact()
>   File "C:\Users\delphi\Code\sumo\git\tools\traci\connection.py", line 95, in _sendExact
>     raise TraCIException(err, prefix[1], _RESULTS[prefix[2]])
> traci.exceptions.TraCIException: Loading state from 'input_state.xml' failed.
> Error: tcpip::Socket::recvAndCheck @ recv: Socket reset by peer
> Quitting (on error).
---------- Differences in output ----------
1,120d0
< i=0 time=2.0 det=d1 count=0 ids=()
< i=0 time=2.0 det=d2 count=0 ids=()
< i=0 time=2.0 det=d3 count=0 ids=()
< i=0 time=3.0 det=d1 count=0 ids=()
< i=0 time=3.0 det=d2 count=0 ids=()
< i=0 time=3.0 det=d3 count=0 ids=()
< i=0 time=4.0 det=d1 count=0 ids=()
< i=0 time=4.0 det=d2 count=0 ids=()
< i=0 time=4.0 det=d3 count=0 ids=()
< i=0 time=5.0 det=d1 count=0 ids=()
< i=0 time=5.0 det=d2 count=0 ids=()
< i=0 time=5.0 det=d3 count=0 ids=()
< i=0 time=6.0 det=d1 count=0 ids=()
< i=0 time=6.0 det=d2 count=1 ids=('0',)
< i=0 time=6.0 det=d3 count=1 ids=('1',)
< i=0 time=7.0 det=d1 count=0 ids=()
< i=0 time=7.0 det=d2 count=1 ids=('0',)
< i=0 time=7.0 det=d3 count=1 ids=('1',)
< i=0 time=8.0 det=d1 count=1 ids=('1',)
< i=0 time=8.0 det=d2 count=1 ids=('0',)
< i=0 time=8.0 det=d3 count=1 ids=('1',)
< i=0 time=9.0 det=d1 count=1 ids=('1',)
< i=0 time=9.0 det=d2 count=1 ids=('0',)
< i=0 time=9.0 det=d3 count=1 ids=('1',)
< i=0 time=10.0 det=d1 count=0 ids=()
< i=0 time=10.0 det=d2 count=1 ids=('0',)
< i=0 time=10.0 det=d3 count=1 ids=('1',)
< i=0 time=11.0 det=d1 count=0 ids=()
< i=0 time=11.0 det=d2 count=0 ids=()
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : traci simulation loadState railSignal ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,23
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 24/181.
> 
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 24/181.
> 
> Error: Answered with error to command 0xab: Loading state from 'input_state.xml' failed.
> Traceback (most recent call last):
>   File "C:/Users/delphi/Code/sumo/git/tests\..\tests/complex/traci/simulation/loadState/railSignal/runner.py", line 41, in <module>
>     traci.simulation.loadState('input_state.xml')
>   File "C:\Users\delphi\Code\sumo\git\tools\traci\_simulation.py", line 430, in loadState
>     self._setCmd(tc.CMD_LOAD_SIMSTATE, "", "s", fileName)
>   File "C:\Users\delphi\Code\sumo\git\tools\traci\domain.py", line 184, in _setCmd
>     self._connection._sendCmd(self._cmdSetID, varID, objectID, format, *values)
>   File "C:\Users\delphi\Code\sumo\git\tools\traci\connection.py", line 178, in _sendCmd
>     return self._sendExact()
>   File "C:\Users\delphi\Code\sumo\git\tools\traci\connection.py", line 95, in _sendExact
>     raise TraCIException(err, prefix[1], _RESULTS[prefix[2]])
> traci.exceptions.TraCIException: Loading state from 'input_state.xml' failed.
> Error: tcpip::Socket::recvAndCheck @ recv: Socket reset by peer
> Quitting (on error).
---------- Differences in tripinfo ----------
5,6d4
<     <tripinfo id="t0" depart="0.00" departLane="" departPos="45.10" departSpeed="-1.00" departDelay="0.00" arrival="57.00" arrivalLane="e_0" arrivalPos="100.00" arrivalSpeed="8.00" duration="57.00" routeLength="300.20" waitingTime="0.00" waitingCount="0" stopTime="0.00" timeLoss="0.00" rerouteNo="0" devices="tripinfo_t0" vType="train" speedFactor="1.00" vaporized=""/>
<     <tripinfo id="t1" depart="10.00" departLane="" departPos="45.10" departSpeed="-1.00" departDelay="0.00" arrival="92.00" arrivalLane="e_0" arrivalPos="100.00" arrivalSpeed="8.00" duration="82.00" routeLength="500.40" waitingTime="2.00" waitingCount="1" stopTime="0.00" timeLoss="17.50" rerouteNo="0" devices="tripinfo_t1" vType="train" speedFactor="1.00" vaporized=""/>

TEST FAILED on ts-sim-winbuild-ba : traci simulation loadState repeat ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,23
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 24/181.
> 
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 24/181.
> 
> Error: Answered with error to command 0xab: Loading state from 'input_state.xml' failed.
> Traceback (most recent call last):
>   File "C:/Users/delphi/Code/sumo/git/tests\..\tests/complex/traci/simulation/loadState/repeat/runner.py", line 37, in <module>
>     traci.simulation.loadState("input_state.xml")
>   File "C:\Users\delphi\Code\sumo\git\tools\traci\_simulation.py", line 430, in loadState
>     self._setCmd(tc.CMD_LOAD_SIMSTATE, "", "s", fileName)
>   File "C:\Users\delphi\Code\sumo\git\tools\traci\domain.py", line 184, in _setCmd
>     self._connection._sendCmd(self._cmdSetID, varID, objectID, format, *values)
>   File "C:\Users\delphi\Code\sumo\git\tools\traci\connection.py", line 178, in _sendCmd
>     return self._sendExact()
>   File "C:\Users\delphi\Code\sumo\git\tools\traci\connection.py", line 95, in _sendExact
>     raise TraCIException(err, prefix[1], _RESULTS[prefix[2]])
> traci.exceptions.TraCIException: Loading state from 'input_state.xml' failed.
> Error: tcpip::Socket::recvAndCheck @ recv: Socket reset by peer
> Quitting (on error).
---------- Differences in fcd ----------
5,106d4
<     <timestep time="50.00">
<         <vehicle id="trip_0" x="130.76" y="95.05" angle="90.00" type="DEFAULT_VEHTYPE" speed="11.01" pos="22.71" lane="CE_0" slope="0.00"/>
<     </timestep>
<     <timestep time="51.00">
<         <vehicle id="trip_0" x="143.96" y="95.05" angle="90.00" type="DEFAULT_VEHTYPE" speed="13.20" pos="35.91" lane="CE_0" slope="0.00"/>
<     </timestep>
<     <timestep time="52.00">
<         <vehicle id="trip_0" x="158.53" y="95.05" angle="90.00" type="DEFAULT_VEHTYPE" speed="14.57" pos="50.48" lane="CE_0" slope="0.00"/>
<     </timestep>
<     <timestep time="53.00">
<         <vehicle id="trip_0" x="172.63" y="95.05" angle="90.00" type="DEFAULT_VEHTYPE" speed="14.09" pos="64.58" lane="CE_0" slope="0.00"/>
<     </timestep>
<     <timestep time="54.00">
<         <vehicle id="trip_0" x="186.48" y="95.05" angle="90.00" type="DEFAULT_VEHTYPE" speed="13.85" pos="78.43" lane="CE_0" slope="0.00"/>
<     </timestep>
<     <timestep time="55.00"/>
<     <timestep time="56.00"/>
<     <timestep time="57.00"/>
<     <timestep time="58.00"/>
<     <timestep time="59.00"/>
<     <timestep time="50.00">
<         <vehicle id="trip_0" x="131.24" y="95.05" angle="90.00" type="DEFAULT_VEHTYPE" speed="11.49" pos="23.19" lane="CE_0" slope="0.00"/>
<     </timestep>
<     <timestep time="51.00">
<         <vehicle id="trip_0" x="144.97" y="95.05" angle="90.00" type="DEFAULT_VEHTYPE" speed="13.73" pos="36.92" lane="CE_0" slope="0.00"/>
<     </timestep>
<     <timestep time="52.00">
<         <vehicle id="trip_0" x="158.91" y="95.05" angle="90.00" type="DEFAULT_VEHTYPE" speed="13.94" pos="50.86" lane="CE_0" slope="0.00"/>
<     </timestep>
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : traci simulation loadState rerouting ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,8
> Error: no declaration found for element 'snapshot'
>  In file 'input_state.xml'
>  At line/column 20/183.
> 
> Quitting (on error).
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
---------- Differences in output ----------
1,200d0
< 1001.0
< 1002.0
< 1003.0
< 1004.0
< 1005.0
< 1006.0
< 1007.0
< 1008.0
< 1009.0
< 1010.0
< 1011.0
< 1012.0
< 1013.0
< 1014.0
< 1015.0
< 1016.0
< 1017.0
< 1018.0
< 1019.0
< 1020.0
< 1021.0
< 1022.0
< 1023.0
< 1024.0
< 1025.0
< 1026.0
< 1027.0
< 1028.0
< 1029.0
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : traci vehicletype save_and_load_vtype_params ( Last six runs Aug2020 )

---------- Differences in errors ----------
4a5,12
> Error: no declaration found for element 'snapshot'
>  In file 'state.xml'
>  At line/column 42/181.
> 
> Quitting (on error).
> Traceback (most recent call last):
>     raise FatalTraCIError("connection closed by SUMO")
> traci.exceptions.FatalTraCIError: connection closed by SUMO
---------- Differences in output ----------
16,30d15
< Get after load....
< vtype
< 4.0 == 4.0
< 0.8 == 0.8
< 0.9 == 0.9
< 3.3 == 3.3
< 99.9 == 99.9
< 1.5 ==1.5
< vehicle
< 4.0 == 4.0
< 0.8 == 0.8
< 0.9 == 0.9
< 3.3 == 3.3
< 99.9 == 99.9
< 1.5 ==1.5
---------- Differences in vehroutes ----------
5,16d4
<     <vehicle id="veh0" type="DEFAULT_VEHTYPE" depart="0.00" departPos="100.00" departSpeed="10.00" speedFactor="1.06" arrival="261.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="veh1" type="t1" depart="10.00" departPos="100.00" departSpeed="10.00" speedFactor="1.00" arrival="266.00">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 
<     <vehicle id="veh2" type="t2@veh2" depart="20.00" departPos="100.00" departSpeed="10.00" speedFactor="0.90" arrival="275.50">
<         <route edges="4/1to3/1 3/1to2/1 2/1to1/1 1/1to0/1"/>
<     </vehicle>
< 

TEST FAILED on ts-sim-winbuild-ba : tutorial circles ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,5
> Error: attribute 'type' is not declared for element 'vType'
>  In file 'data/circles.rou.xml'
>  At line/column 3/86.
> 
> Quitting (on error).
---------- Differences in output ----------
2c2
< >> Simulation closed with status 0
---
> >> Simulation closed with status 1

TEST FAILED on ts-sim-winbuild-ba : tutorial hello ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,6
> Error: no declaration found for element 'nodes'
>  In file 'data/hello.nod.xml'
>  At line/column 3/132.
> 
> Error: No nodes loaded.
> Quitting (on error).
---------- Differences in net ----------
4c4
< <net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">
---
> <net version="0.13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">
9c9
<         <lane id=":2_0_0" index="0" speed="13.89" length="0.10" shape="500.00,-1.60 500.00,-1.60"/>
---
>         <lane id=":2_0_0" index="0" speed="13.90" length="0.10" shape="500.00,-1.65 500.00,-1.65"/>
13c13
<         <lane id="1to2_0" index="0" speed="13.89" length="500.00" shape="0.00,-1.60 500.00,-1.60"/>
---
>         <lane id="1to2_0" index="0" speed="13.90" length="500.00" shape="0.00,-1.65 500.00,-1.65"/>
16c16
<         <lane id="out_0" index="0" speed="13.89" length="1.00" shape="500.00,-1.60 501.00,-1.60"/>
---
>         <lane id="out_0" index="0" speed="13.90" length="1.00" shape="500.00,-1.65 501.00,-1.65"/>
19,20c19,20
<     <junction id="1" type="dead_end" x="0.00" y="0.00" incLanes="" intLanes="" shape="0.00,0.00 0.00,-3.20"/>
<     <junction id="2" type="priority" x="500.00" y="0.00" incLanes="1to2_0" intLanes=":2_0_0" shape="500.00,0.00 500.00,-3.20 500.00,0.00">
---
>     <junction id="1" type="unregulated" x="0.00" y="0.00" incLanes="" intLanes="" shape="-0.00,-0.05 -0.00,-3.25"/>
>     <junction id="2" type="priority" x="500.00" y="0.00" incLanes="1to2_0" intLanes=":2_0_0" shape="500.00,-0.05 500.00,-3.25 500.00,-0.05">
23c23
<     <junction id="3" type="dead_end" x="501.00" y="0.00" incLanes="out_0" intLanes="" shape="501.00,-3.20 501.00,0.00"/>
---
>     <junction id="3" type="unregulated" x="501.00" y="0.00" incLanes="out_0" intLanes="" shape="501.00,-3.25 501.00,-0.05"/>
---------- Differences in output ----------
3,43c3,4
< Parsing edges from (FILE)
<  Import done:
<    3 nodes loaded.
<    2 edges loaded.
< Removing self-loops ... done ((TIME)).
< Removing empty nodes ... done ((TIME)).
<    0 nodes removed.
< Moving network to origin ... done ((TIME)).
< Computing turning directions ... done ((TIME)).
< Assigning nodes to traffic lights ... done ((TIME)).
< Sorting nodes' edges ... done ((TIME)).
< Computing node shapes ... done ((TIME)).
< Computing edge shapes ... done ((TIME)).
< Computing node types ... done ((TIME)).
< Computing priorities ... done ((TIME)).
< Computing approached edges ... done ((TIME)).
< Guessing and setting roundabouts ... done ((TIME)).
< Computing approaching lanes ... done ((TIME)).
< Dividing of lanes on approached lanes ... done ((TIME)).
< Processing turnarounds ... done ((TIME)).
< Rechecking of lane endings ... done ((TIME)).
< Computing traffic light control information ... done ((TIME)).
< Computing node logics ... done ((TIME)).
< Computing traffic light logics ... done ((TIME)).
<  0 traffic light(s) computed.
< Building inner edges ... done ((TIME)).
< -----------------------------------------------------
< Summary:
<  Node type statistics:
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : tutorial quickstart ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,6
> Error: no declaration found for element 'nodes'
>  In file 'data/quickstart.nod.xml'
>  At line/column 3/132.
> 
> Error: No nodes loaded.
> Quitting (on error).
---------- Differences in net ----------
4c4
< <net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">
---
> <net version="0.13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">
8,11d7
<     <type id="a" priority="3" numLanes="3" speed="13.89"/>
<     <type id="b" priority="3" numLanes="2" speed="13.89"/>
<     <type id="c" priority="2" numLanes="3" speed="13.89"/>
< 
13,15c9,11
<         <lane id=":1_0_0" index="0" speed="13.89" length="8.00" shape="1004.00,1008.00 996.00,1008.00"/>
<         <lane id=":1_0_1" index="1" speed="13.89" length="8.00" shape="1004.00,1004.80 996.00,1004.80"/>
<         <lane id=":1_0_2" index="2" speed="13.89" length="8.00" shape="1004.00,1001.60 996.00,1001.60"/>
---
>         <lane id=":1_0_0" index="0" speed="13.89" length="3.00" shape="1001.50,1008.25 998.50,1008.25"/>
>         <lane id=":1_0_1" index="1" speed="13.89" length="3.00" shape="1001.50,1004.95 998.50,1004.95"/>
>         <lane id=":1_0_2" index="2" speed="13.89" length="3.00" shape="1001.50,1001.65 998.50,1001.65"/>
18,20c14,16
<         <lane id=":1_3_0" index="0" speed="13.89" length="8.27" shape="996.00,995.20 998.46,994.70 1000.00,993.60 1001.54,992.50 1004.00,992.00"/>
<         <lane id=":1_3_1" index="1" speed="13.89" length="8.27" shape="996.00,995.20 1004.00,995.20"/>
<         <lane id=":1_3_2" index="2" speed="13.89" length="8.27" shape="996.00,998.40 1004.00,998.40"/>
---
>         <lane id=":1_3_0" index="0" speed="13.89" length="3.49" shape="998.50,995.05 1001.50,991.75"/>
>         <lane id=":1_3_1" index="1" speed="13.89" length="3.49" shape="998.50,995.05 1001.50,995.05"/>
>         <lane id=":1_3_2" index="2" speed="13.89" length="3.49" shape="998.50,998.35 1001.50,998.35"/>
23,25c19,21
<         <lane id=":2_0_0" index="0" speed="13.89" length="8.00" shape="1004.00,8.00 996.00,8.00"/>
<         <lane id=":2_0_1" index="1" speed="13.89" length="8.00" shape="1004.00,4.80 996.00,4.80"/>
<         <lane id=":2_0_2" index="2" speed="13.89" length="8.00" shape="1004.00,1.60 996.00,1.60"/>
---
<truncated after showing first 30 lines>
---------- Differences in output ----------
4,46c4,5
< Parsing edges from (FILE)
< Parsing connections from (FILE)
<  Import done:
<    14 nodes loaded.
<    3 types loaded.
<    26 edges loaded.
< Removing self-loops ... done ((TIME)).
< Removing empty nodes ... done ((TIME)).
<    0 nodes removed.
< Moving network to origin ... done ((TIME)).
< Computing turning directions ... done ((TIME)).
< Assigning nodes to traffic lights ... done ((TIME)).
< Sorting nodes' edges ... done ((TIME)).
< Computing node shapes ... done ((TIME)).
< Computing edge shapes ... done ((TIME)).
< Computing node types ... done ((TIME)).
< Computing priorities ... done ((TIME)).
< Computing approached edges ... done ((TIME)).
< Guessing and setting roundabouts ... done ((TIME)).
< Computing approaching lanes ... done ((TIME)).
< Dividing of lanes on approached lanes ... done ((TIME)).
< Processing turnarounds ... done ((TIME)).
< Rechecking of lane endings ... done ((TIME)).
< Computing traffic light control information ... done ((TIME)).
< Computing node logics ... done ((TIME)).
< Computing traffic light logics ... done ((TIME)).
<  0 traffic light(s) computed.
< Building inner edges ... done ((TIME)).
< -----------------------------------------------------
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : tutorial traci_pedestrian_crossing ( Last six runs Aug2020 )

---------- Differences in errors ----------
0a1,28
> Error: no declaration found for element 'nodes'
>  In file 'data/pedcrossing.nod.xml'
>  At line/column 29/147.
> 
> Error: No nodes loaded.
> Quitting (on error).
> Traceback (most recent call last):
>   File "C:/Users/delphi/Code/sumo/git/tests\..\tests/complex/tutorial/traci_pedestrian_crossing/runner.py", line 157, in <module>
>     '--period', '35']))
>   File "C:\Users\delphi\Code\sumo\git\tools\randomTrips.py", line 440, in main
>     net = sumolib.net.readNet(options.netfile)
>   File "C:\Users\delphi\Code\sumo\git\tools\sumolib\net\__init__.py", line 790, in readNet
>     parse(filename, netreader)
>   File "c:\python27\lib\xml\sax\__init__.py", line 33, in parse
>     parser.parse(source)
>   File "c:\python27\lib\xml\sax\expatreader.py", line 105, in parse
>     source = saxutils.prepare_input_source(source)
>   File "c:\python27\lib\xml\sax\saxutils.py", line 349, in prepare_input_source
>     f = urllib.urlopen(source.getSystemId())
>   File "c:\python27\lib\urllib.py", line 87, in urlopen
>     return opener.open(url)
>   File "c:\python27\lib\urllib.py", line 213, in open
>     return getattr(self, name)(url)
>   File "c:\python27\lib\urllib.py", line 469, in open_file
>     return self.open_local_file(url)
>   File "c:\python27\lib\urllib.py", line 483, in open_local_file
>     raise IOError(e.errno, e.strerror, e.filename)
> IOError: [Errno 2] Das System kann die angegebene Datei nicht finden: 'pedcrossing.net.xml'
---------- Differences in output ----------
2,95d1
< Success.
< Loading configuration ... done.
< ***Starting server on port <PORT> ***
< Loading net-file from 'data/../pedcrossing.net.xml' ... done ((TIME)).
< Loading additional-files from 'data/pedcrossing.tll.xml' ... done ((TIME)).
< Loading done.
< Simulation started with time: 0.00
< 18.0: pedestrian ped0 pushes the button (waiting: 1)
< 43.0: pedestrian ped1 pushes the button (waiting: 1)
< 84.0: pedestrian ped2 pushes the button (waiting: 1)
< 122.0: pedestrian ped4 pushes the button (waiting: 1)
< 167.0: pedestrian ped7 pushes the button (waiting: 1)
< 277.0: pedestrian ped8 pushes the button (waiting: 1)
< 294.0: pedestrian ped9 pushes the button (waiting: 1)
< 341.0: pedestrian ped10 pushes the button (waiting: 1)
< 446.0: pedestrian ped11 pushes the button (waiting: 1)
< 487.0: pedestrian ped12 pushes the button (waiting: 1)
< 537.0: pedestrian ped13 pushes the button (waiting: 1)
< 613.0: pedestrian ped15 pushes the button (waiting: 1)
< 635.0: pedestrian ped16 pushes the button (waiting: 2)
< 686.0: pedestrian ped19 pushes the button (waiting: 1)
< 732.0: pedestrian ped20 pushes the button (waiting: 2)
< 734.0: pedestrian ped21 pushes the button (waiting: 2)
< 823.0: pedestrian ped22 pushes the button (waiting: 1)
< 857.0: pedestrian ped24 pushes the button (waiting: 1)
< 948.0: pedestrian ped25 pushes the button (waiting: 1)
< 1018.0: pedestrian ped27 pushes the button (waiting: 1)
< 1022.0: pedestrian ped28 pushes the button (waiting: 2)
< 1113.0: pedestrian ped30 pushes the button (waiting: 1)
<truncated after showing first 30 lines>

Detailed information for the tests that had known bugs:

TEST had known bugs (see #254) on ts-sim-winbuild-ba : sumo output one_vehicle ( Last six runs Aug2020 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
10c10
< success 0.1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (71.4, 71.5) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
12c12
< success 1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (72.0, 73.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
14c14
< success 10 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
18c18
< success 0.1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (71.4, 71.5) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
20c20
< success 1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (72.0, 73.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
22c22
< success 10 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
24c24
< success 100 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (100.0, 200.0) [('e1', -1.0), ('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
34c34
< success 0.1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-winbuild-ba : sumo output teleport ( Last six runs Aug2020 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
2c2
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
---
> success 0.1 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
4c4
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
---
> success 0.1 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
6c6
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
---
> success 1 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
8c8
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
---
> success 1 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
10c10
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
---
> success 10 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
12c12
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
---
> success 10 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
14c14
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
---
> success 100 ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0']
16c16
< success ['--step-length', '.1', '--end', '51'] ['2/1to1/1_0', '1/1to0/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-winbuild-ba : sumo output teleport_multihop ( Last six runs Aug2020 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
34c34
< success 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (230.0, 230.1) [('e2', 9.99), ('e3', 10.0), ('edge', 9.99), ('lane', 9.99)]
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (149.0, 149.1) [('e2', 9.99), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
36c36
< success 0.1 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (148.1, 148.2) [('e2', 9.99), ('e3', 10.0), ('edge', 9.99), ('lane', 9.99)]
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (149.0, 149.1) [('e2', 9.99), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
38c38
< success 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (230.0, 231.0) [('e2', 9.99), ('e3', 10.0), ('edge', 9.99), ('lane', 9.99)]
---
> failed 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (149.0, 150.0) [('e2', 9.93), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
40c40
< success 1 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (148.0, 149.0) [('e2', 9.91), ('e3', 10.0), ('edge', 9.91), ('lane', 9.91)]
---
> failed 1 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (149.0, 150.0) [('e2', 9.93), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
42c42
< success 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (230.0, 240.0) [('e2', 9.42), ('e3', 9.9), ('edge', 9.42), ('lane', 9.42)]
---
> failed 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (140.0, 150.0) [('e2', 9.99), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
44c44
< success 10 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (140.0, 150.0) [('e2', 9.96), ('e3', 9.99), ('edge', 9.96), ('lane', 9.96)]
---
> failed 10 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (140.0, 150.0) [('e2', 9.99), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
46c46
< success 100 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (200.0, 300.0) [('e1', 10.0), ('e2', 9.22), ('e3', 5.71), ('edge', 9.22), ('lane', 9.22)]
---
> failed 100 ['--step-length', '.1', '--end', '1000'] 2/1to1/1_0 (100.0, 200.0) [('e1', 10.0), ('e2', 7.95), ('e3', 10.0), ('edge', 10.0), ('lane', 10.0)]
48c48
< success 100 ['--step-length', '.1', '--end', '1000'] 1/1to0/1_0 (100.0, 200.0) [('e1', 9.53), ('e2', 5.82), ('e3', 6.93), ('edge', 5.82), ('lane', 5.82)]
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-winbuild-ba : sumo output teleport_multihop_newDefaults ( Last six runs Aug2020 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
18c18
< success 0.1 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.2, 76.3) [('e2', 10.49), ('e3', 10.35), ('edge', 10.49), ('lane', 10.49)]
20c20
< success 0.1 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.2, 76.3) [('e2', 10.49), ('e3', 10.35), ('edge', 10.49), ('lane', 10.49)]
22c22
< success 1 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.0, 77.0) [('e2', 10.39), ('e3', 10.35), ('edge', 10.39), ('lane', 10.39)]
24c24
< success 1 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (76.0, 77.0) [('e2', 10.39), ('e3', 10.35), ('edge', 10.39), ('lane', 10.39)]
26c26
< success 10 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.0, 80.0) [('e2', 10.42), ('e3', 10.25), ('edge', 10.42), ('lane', 10.42)]
28c28
< success 10 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (70.0, 80.0) [('e2', 10.42), ('e3', 10.25), ('edge', 10.42), ('lane', 10.42)]
30c30
< success 100 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0']
---
> failed 100 ['--step-length', '.1', '--end', '100'] 2/1to1/1_0 (0.0, 100.0) [('e1', 10.27), ('e2', 10.24), ('e3', 9.59), ('edge', 10.24), ('lane', 10.24)]
32c32
< success 100 ['--step-length', '.1', '--end', '100'] ['2/1to1/1_0', '1/1to0/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-winbuild-ba : sumo output two_same_vehicles ( Last six runs Aug2020 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
10c10
< success 0.1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (75.4, 75.5) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
12c12
< success 1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (76.0, 77.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
14c14
< success 10 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
18c18
< success 0.1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (75.4, 75.5) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
20c20
< success 1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (76.0, 77.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
22c22
< success 10 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
24c24
< success 100 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (100.0, 200.0) [('e1', -1.0), ('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
34c34
< success 0.1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-winbuild-ba : sumo output two_vehicles_diff_length ( Last six runs Aug2020 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
10c10
< success 0.1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (76.4, 76.5) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
12c12
< success 1 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (77.0, 78.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
14c14
< success 10 ['--step-length', '.1', '--end', '100'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
18c18
< success 0.1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (76.4, 76.5) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
20c20
< success 1 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (77.0, 78.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
22c22
< success 10 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (80.0, 90.0) [('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
24c24
< success 100 ['--step-length', '.1', '--end', '1000'] ['3/1to2/1_0']
---
> failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (100.0, 200.0) [('e1', -1.0), ('e2', 10.0), ('e3', -1.0), ('edge', -1.0), ('lane', -1.0)]
34c34
< success 0.1 ['--step-length', '1', '--end', '100'] ['3/1to2/1_0']
<truncated after showing first 30 lines>

TEST had known bugs (see #254) on ts-sim-winbuild-ba : sumo output two_vehicles_diff_speed ( Last six runs Aug2020 )

different outputs from detectors which should detect the same
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
0a1,48
> Loading configuration ... done.
> failed 0.1 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (38.4, 38.5) [('e2', 9.6), ('e3', 9.5), ('edge', 9.6), ('lane', 9.6)]
> Loading configuration ... done.
> failed 1 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (38.0, 39.0) [('e2', 9.64), ('e3', 9.5), ('edge', 9.64), ('lane', 9.64)]
> Loading configuration ... done.
> failed 10 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (30.0, 40.0) [('e2', 9.86), ('e3', 9.5), ('edge', 9.86), ('lane', 9.86)]
> Loading configuration ... done.
> failed 100 ['--step-length', '.1', '--end', '51'] 3/1to2/1_0 (0.0, 51.0) [('e2', 9.62), ('e3', 9.5), ('edge', 9.62), ('lane', 9.62)]
> Loading configuration ... done.
> failed 0.1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (38.4, 38.5) [('e2', 9.6), ('e3', 9.5), ('edge', 9.6), ('lane', 9.6)]
> Loading configuration ... done.
> failed 1 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (38.0, 39.0) [('e2', 9.64), ('e3', 9.5), ('edge', 9.64), ('lane', 9.64)]
> Loading configuration ... done.
> failed 10 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (30.0, 40.0) [('e2', 9.86), ('e3', 9.5), ('edge', 9.86), ('lane', 9.86)]
> Loading configuration ... done.
> failed 100 ['--step-length', '.1', '--end', '100'] 3/1to2/1_0 (0.0, 100.0) [('e1', 9.5), ('e2', 9.53), ('e3', 9.5), ('edge', 9.47), ('lane', 9.47)]
> Loading configuration ... done.
> failed 0.1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (38.4, 38.5) [('e2', 9.6), ('e3', 9.5), ('edge', 9.6), ('lane', 9.6)]
> Loading configuration ... done.
> failed 1 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (38.0, 39.0) [('e2', 9.64), ('e3', 9.5), ('edge', 9.64), ('lane', 9.64)]
> Loading configuration ... done.
> failed 10 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (30.0, 40.0) [('e2', 9.86), ('e3', 9.5), ('edge', 9.86), ('lane', 9.86)]
> Loading configuration ... done.
> failed 100 ['--step-length', '.1', '--end', '1000'] 3/1to2/1_0 (0.0, 100.0) [('e1', 9.5), ('e2', 9.53), ('e3', 9.5), ('edge', 9.47), ('lane', 9.47)]
> Loading configuration ... done.
> failed 0.1 ['--step-length', '1', '--end', '51'] 3/1to2/1_0 (39.0, 40.0) [('e2', 9.6), ('e3', 9.5), ('edge', 9.6), ('lane', 9.6)]
> Loading configuration ... done.
> failed 1 ['--step-length', '1', '--end', '51'] 3/1to2/1_0 (39.0, 40.0) [('e2', 9.6), ('e3', 9.5), ('edge', 9.6), ('lane', 9.6)]
> Loading configuration ... done.
<truncated after showing first 30 lines>

TEST had known bugs (#4727) on ts-sim-winbuild-ba : traci ContextSubscriptionFilters leadFollow carFollowing ( Last six runs Aug2020 )

#4727
(This bug was triggered by text found in file 'output' matching '.')
---------- Differences in output ----------
4d3
< lead_straight
6d4
< [002] Context results for vehicle 'ego':
7a6
> [002] Context results for vehicle 'ego':
9d7
< [003] Context results for vehicle 'ego':
10a9
> [003] Context results for vehicle 'ego':
12d10
< [004] Context results for vehicle 'ego':
13a12
> [004] Context results for vehicle 'ego':
15d13
< [005] Context results for vehicle 'ego':
16a15
> [005] Context results for vehicle 'ego':
18d16
< [006] Context results for vehicle 'ego':
19a18
> [006] Context results for vehicle 'ego':
21d19
< [007] Context results for vehicle 'ego':
22a21
> [007] Context results for vehicle 'ego':
24d22
< [008] Context results for vehicle 'ego':
25a24
> [008] Context results for vehicle 'ego':
<truncated after showing first 30 lines>

2 TESTS had known bugs (#4727) on ts-sim-winbuild-ba :

#4727
(This bug was triggered by text found in file 'output' matching '.')
---------- Differences in output ----------
4a5
> follow_straight
7d7
< follow_straight
9a10
> follow_straight
12d12
< follow_straight
14a15
> follow_straight
17d17
< follow_straight
19a20
> follow_straight
22d22
< follow_straight
24a25
> follow_straight
27d27
< follow_straight
29a30
> follow_straight
32d32
< follow_straight
34a35
> follow_straight
37d37
< follow_straight
39a40
> follow_straight
<truncated after showing first 30 lines>

TEST had known bugs (#4727) on ts-sim-winbuild-ba : traci ContextSubscriptionFilters leadFollow laneChangeNeighbors ( Last six runs Aug2020 )

#4727
(This bug was triggered by text found in file 'output' matching '.')
---------- Differences in output ----------
4,5d3
< follow_straight
< follow_right
6a5,7
> follow_right
> follow_straight
> lead_left
9d9
< lead_left
11,12d10
< follow_straight
< follow_right
13a12,14
> follow_right
> follow_straight
> lead_left
16d16
< lead_left
18,19d17
< follow_straight
< follow_right
20a19,21
> follow_right
> follow_straight
> lead_left
23d23
< lead_left
25,26d24
< follow_straight
< follow_right
<truncated after showing first 30 lines>

TEST had known bugs (see #3263) on ts-sim-winbuild-ba : traci vehicle moveToXY keepRoute2 ( Last six runs Aug2020 )

mapping failure
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
0a1,2
> internal corner (inside, segment2) failed: x=198, x2=198.0,   y=1.9, y2=1.9,   lane=middle_0, lane2=middle_0, pos=102, pos2=98.0   posLat=2.0 posLat2=1.9
> internal corner (outside, far) failed: x=203, x2=203.0,   y=-4, y2=-4.0,   lane=, lane2=middle_0, pos=-1073741824.0, pos2=100.0   posLat=-1073741824.0 posLat2=-1.41421356237

TEST had known bugs (see #5383) on ts-sim-winbuild-ba : traci vehicle moveToXY permissions ( Last six runs Aug2020 )

mapping failure
(This bug was triggered by text found in file 'output' matching 'failed')
---------- Differences in output ----------
0a1
> right lane (ignore permissions) failed: mode=6 x=40, x2=40.0,   y=-1.6, y2=-1.6,   lane=beg_0, lane2=, pos=40, pos2=-1073741824.0   posLat=0.0 posLat2=-1073741824.0

TEST had known bugs (see #6192) on ts-sim-winbuild-ba : traci vehicle openGap with_low_maxDecel_fast_CACC ( Last six runs Aug2020 )

not even failing as intended
(This bug was triggered by text found in file 'errors' matching 'Error')
---------- Differences in errors ----------
0a1,8
> Traceback (most recent call last):
>   File "C:/Users/delphi/Code/sumo/git/tests\..\tests/complex/traci/vehicle/openGap/runner.py", line 155, in <module>
>     runSingle(targetTimeHeadway, targetSpaceHeadway, duration, changeRate, maxDecel, refVehID)
>   File "C:/Users/delphi/Code/sumo/git/tests\..\tests/complex/traci/vehicle/openGap/runner.py", line 65, in runSingle
>     leader = results[tc.VAR_LEADER][0]
> TypeError: 'NoneType' object has no attribute '__getitem__'
> Error: tcpip::Socket::recvAndCheck @ recv: Socket reset by peer
> Quitting (on error).
---------- Differences in output ----------
4,103c4,103
< Time 2.0: Gap 'follower'->'leader' = 5.938 (headway=0.367)
< 'follower' speed = 16.161582708
< Time 3.0: Gap 'follower'->'leader' = 8.966 (headway=0.528)
< 'follower' speed = 16.9836198736
< Time 4.0: Gap 'follower'->'leader' = 11.281 (headway=0.641)
< 'follower' speed = 17.5863190784
< Time 5.0: Gap 'follower'->'leader' = 13.069 (headway=0.725)
< 'follower' speed = 18.0379935645
< Time 6.0: Gap 'follower'->'leader' = 14.459 (headway=0.787)
< 'follower' speed = 18.3815472225
< Time 7.0: Gap 'follower'->'leader' = 15.545 (headway=0.834)
< 'follower' speed = 18.6456171431
< Time 8.0: Gap 'follower'->'leader' = 16.397 (headway=0.870)
< 'follower' speed = 18.8501483763
< Time 9.0: Gap 'follower'->'leader' = 17.068 (headway=0.898)
< 'follower' speed = 19.0094667411
< Time 10.0: Gap 'follower'->'leader' = 17.596 (headway=0.920)
< 'follower' speed = 19.1340998278
< Time 11.0: Gap 'follower'->'leader' = 18.013 (headway=0.937)
< 'follower' speed = 19.231918606
< Time 12.0: Gap 'follower'->'leader' = 18.342 (headway=0.950)
< 'follower' speed = 19.3088858604
< Time 13.0: Gap 'follower'->'leader' = 18.603 (headway=0.960)
< 'follower' speed = 19.3695649077
< Time 14.0: Gap 'follower'->'leader' = 18.810 (headway=0.969)
< 'follower' speed = 19.4174756866
< Time 15.0: Gap 'follower'->'leader' = 18.973 (headway=0.975)
< 'follower' speed = 19.4553500651
< Time 16.0: Gap 'follower'->'leader' = 19.103 (headway=0.980)
<truncated after showing first 30 lines>

Detailed information for the tests that were terminated before completion:

TEST were terminated before completion (TIMEOUT) on ts-sim-winbuild-ba : sumo meso segment_length ( Last six runs Aug2020 )

Test exceeded wallclock time limit of 900.0 seconds
---------- Differences in errors ----------
1,18d0
< Warning: Teleporting vehicle 'flow_0.290'; waited too long, from edge 'D3E3':3 to edge 'E3E4':2, time 1942.70.
< Warning: Teleporting vehicle 'flow_0.1327'; waited too long, from edge 'D1D2':3, time 3149.99.
< Warning: Vehicle 'flow_0.1327' ends teleporting on edge 'E2E3':2, time 3184.95.
< Warning: Teleporting vehicle 'flow_0.1253'; waited too long, from edge 'C2D2':2, time 3350.35.
< Warning: Teleporting vehicle 'flow_0.1177'; waited too long, from edge 'C2D2':3 to edge 'D2E2':1, time 3369.50.
< Warning: Vehicle 'flow_0.1253' teleports beyond arrival edge 'E3E4', time 3455.23.
< Warning: Teleporting vehicle 'flow_0.290'; waited too long, from edge 'D3E3':3 to edge 'E3E4':2, time 1942.70.
< Warning: Teleporting vehicle 'flow_0.1327'; waited too long, from edge 'D1D2':3, time 3149.99.
< Warning: Vehicle 'flow_0.1327' ends teleporting on edge 'E2E3':2, time 3184.95.
< Warning: Teleporting vehicle 'flow_0.1253'; waited too long, from edge 'C2D2':2, time 3350.35.
< Warning: Teleporting vehicle 'flow_0.1177'; waited too long, from edge 'C2D2':3 to edge 'D2E2':1, time 3369.50.
< Warning: Vehicle 'flow_0.1253' teleports beyond arrival edge 'E3E4', time 3455.23.
< Warning: Teleporting vehicle 'flow_0.290'; waited too long, from edge 'D3E3':3 to edge 'E3E4':2, time 1942.70.
< Warning: Teleporting vehicle 'flow_0.1327'; waited too long, from edge 'D1D2':3, time 3149.99.
< Warning: Vehicle 'flow_0.1327' ends teleporting on edge 'E2E3':2, time 3184.95.
< Warning: Teleporting vehicle 'flow_0.1253'; waited too long, from edge 'C2D2':2, time 3350.35.
< Warning: Teleporting vehicle 'flow_0.1177'; waited too long, from edge 'C2D2':3 to edge 'D2E2':1, time 3369.50.
< Warning: Vehicle 'flow_0.1253' teleports beyond arrival edge 'E3E4', time 3455.23.
25,26d6
< Warning: Teleporting vehicle 'flow_0.569'; waited too long, from edge 'D2D3':2, time 2145.24.
< Warning: Vehicle 'flow_0.569' teleports beyond arrival edge 'E3E4', time 2215.16.
28a9,12
> Warning: Teleporting vehicle 'flow_0.1113'; waited too long, from edge 'C2D2':2, time 2764.47.
> Warning: Vehicle 'flow_0.1113' ends teleporting on edge 'D3D4':0, time 2799.43.
> Warning: Teleporting vehicle 'flow_0.1425'; waited too long, from edge 'D2E2':2, time 3374.74.
> Warning: Vehicle 'flow_0.1425' ends teleporting on edge 'E3E4':1, time 3409.70.
35,36d18
< Warning: Teleporting vehicle 'flow_0.569'; waited too long, from edge 'D2D3':2, time 2145.24.
< Warning: Vehicle 'flow_0.569' teleports beyond arrival edge 'E3E4', time 2215.16.
<truncated after showing first 30 lines>
---------- Differences in output ----------
3,10d2
< Durations int.net.xml: count 19, min 302.79 (10), max 306.35 (140), mean 304.36 Q1 303.06, median 303.74, Q3 306.35
< Durations with junction control int.net.xml: count 19, min 302.70 (10), max 481.33 (140), mean 402.60 Q1 324.87, median 387.45, Q3 481.33
< Deviation int.net.xml meso vs. micro: 0.268959541746
< Deviation int.net.xml meso jc vs. micro: 0.0674865821079
< Durations noint.net.xml: count 19, min 309.99 (100), max 311.31 (120), mean 310.75 Q1 310.24, median 310.72, Q3 311.18
< Durations with junction control noint.net.xml: count 19, min 311.62 (10), max 473.85 (150), mean 399.04 Q1 337.87, median 408.87, Q3 473.85
< Deviation noint.net.xml meso vs. micro: 0.213625895275
< Deviation noint.net.xml meso jc vs. micro: -0.0347733657277

TEST were terminated before completion (TIMEOUT) on ts-sim-winbuild-ba : traffic_lights loop_flow ( Last six runs Aug2020 )

Test exceeded wallclock time limit of 900.0 seconds
---------- Differences in output ----------
1,144d0
< Computing for 0<->0
<  for tls-type static
<  for tls-type actuated
<  for tls-type sotl_phase
<  for tls-type sotl_platoon
<  for tls-type sotl_request
<  for tls-type sotl_wave
<  for tls-type sotl_marching
<  for tls-type swarm
< Computing for 0<->600
<  for tls-type static
<  for tls-type actuated
<  for tls-type sotl_phase
<  for tls-type sotl_platoon
<  for tls-type sotl_request
<  for tls-type sotl_wave
<  for tls-type sotl_marching
<  for tls-type swarm
< Computing for 0<->1200
<  for tls-type static
<  for tls-type actuated
<  for tls-type sotl_phase
<  for tls-type sotl_platoon
<  for tls-type sotl_request
<  for tls-type sotl_wave
<  for tls-type sotl_marching
<  for tls-type swarm
< Computing for 0<->1800
<  for tls-type static
<truncated after showing first 30 lines>