14Jul20rv1_6_0+1218-642d16a7a5 - detailed test results for NETEDIT

To reconnect the TextTest GUI to these results, run:

texttestc.py -a netedit -d C:/Users/delphi/Code/sumo/git/tests -reconnect C:/Users/delphi/Code/sumo/msvc12x64texttesttmp/msvc12x64.13Aug024147.4884 -g

To start TextTest for these tests, run:

texttestc.py -a netedit -d C:/Users/delphi/Code/sumo/git/tests


daily.additional: 743 tests: 582 succeeded 153 FAILED 8 known bugs

Detailed information for the tests that FAILED:

TEST FAILED on ts-sim-winbuild-ba : additionalElements access inspect_selection blockmove ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
18,41d17
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into busStop 'busStopA'
< Debug: Setting new attribute selected 'true' into busStop 'busStopB'
< Debug: Setting new attribute selected 'true' into access 'busStopAaccess0'
< Debug: Setting new attribute selected 'true' into access 'busStopBaccess0'
< Debug: Setting new attribute blockMovement 'true' into access 'busStopAaccess0'
< Debug: Setting new attribute blockMovement 'true' into access 'busStopBaccess0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute blockMovement '0' into access 'busStopBaccess0'
< Debug: Setting previous attribute blockMovement '0' into access 'busStopAaccess0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into access 'busStopBaccess0'
< Debug: Setting previous attribute selected '0' into access 'busStopAaccess0'
< Debug: Setting previous attribute selected '0' into busStop 'busStopB'
< Debug: Setting previous attribute selected '0' into busStop 'busStopA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
45c21
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
---
> Debug: Removed inspected element from Inspected ACs. 0 ACs remains.
48d23
<truncated after showing first 30 lines>
---------- Differences in log ----------
0a1
> Warning: Invalid format of parameter ( i)

TEST FAILED on ts-sim-winbuild-ba : additionalElements access inspect_selection friendlypos ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
6c6
<         <access lane="gneE1_0" pos="10.00" length="10" friendlyPos="1">
---
>         <access lane="gneE1_0" pos="10.00" length="10">
---------- Differences in errors ----------
18,41c18,19
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into busStop 'busStopA'
< Debug: Setting new attribute selected 'true' into busStop 'busStopB'
< Debug: Setting new attribute selected 'true' into access 'busStopAaccess0'
< Debug: Setting new attribute selected 'true' into access 'busStopBaccess0'
< Debug: Setting new attribute friendlyPos 'true' into access 'busStopAaccess0'
< Debug: Setting new attribute friendlyPos 'true' into access 'busStopBaccess0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute friendlyPos '1' into access 'busStopBaccess0'
< Debug: Setting previous attribute friendlyPos '0' into access 'busStopAaccess0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into access 'busStopBaccess0'
< Debug: Setting previous attribute selected '0' into access 'busStopAaccess0'
< Debug: Setting previous attribute selected '0' into busStop 'busStopB'
< Debug: Setting previous attribute selected '0' into busStop 'busStopA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value 'true' for attribute pos of access isn't valid
> Debug: Value 'truei' for attribute pos of access isn't valid
45c23
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements access inspect_selection length ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
6c6
<         <access lane="gneE1_0" pos="10.00" length="5.5">
---
>         <access lane="gneE1_0" pos="10.00" length="10">
13c13
<         <access lane="gneE0_0" pos="20.00" length="5.5" friendlyPos="1">
---
>         <access lane="gneE0_0" pos="20.00" length="20" friendlyPos="1">
---------- Differences in errors ----------
23,54c23,27
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into busStop 'busStopA'
< Debug: Setting new attribute selected 'true' into busStop 'busStopB'
< Debug: Setting new attribute selected 'true' into access 'busStopAaccess0'
< Debug: Setting new attribute selected 'true' into access 'busStopBaccess0'
< Debug: Setting new attribute length '' into access 'busStopAaccess0'
< Debug: Setting new attribute length '' into access 'busStopBaccess0'
< Debug: Value 'dummyLenght' for attribute length of access isn't valid
< Debug: Value '-7' for attribute length of access isn't valid
< Debug: Setting new attribute length '5.5' into access 'busStopAaccess0'
< Debug: Setting new attribute length '5.5' into access 'busStopBaccess0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute length '' into access 'busStopBaccess0'
< Debug: Setting previous attribute length '' into access 'busStopAaccess0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute length '20' into access 'busStopBaccess0'
< Debug: Setting previous attribute length '10' into access 'busStopAaccess0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into access 'busStopBaccess0'
< Debug: Setting previous attribute selected '0' into access 'busStopAaccess0'
< Debug: Setting previous attribute selected '0' into busStop 'busStopB'
< Debug: Setting previous attribute selected '0' into busStop 'busStopA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements access inspect_selection parameters ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
23,154c23,29
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into busStop 'busStopA'
< Debug: Setting new attribute selected 'true' into busStop 'busStopB'
< Debug: Setting new attribute selected 'true' into access 'busStopAaccess0'
< Debug: Setting new attribute selected 'true' into access 'busStopBaccess0'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into access 'busStopAaccess0'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into access 'busStopBaccess0'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into access 'busStopAaccess0'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into access 'busStopBaccess0'
< Debug: Setting new attribute genericParameter '' into access 'busStopAaccess0'
< Debug: Setting new attribute genericParameter '' into access 'busStopBaccess0'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into access 'busStopAaccess0'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into access 'busStopBaccess0'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into access 'busStopAaccess0'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into access 'busStopBaccess0'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into access 'busStopAaccess0'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into access 'busStopBaccess0'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into access 'busStopAaccess0'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into access 'busStopBaccess0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into access 'busStopBaccess0'
< Debug: Setting previous attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into access 'busStopAaccess0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into access 'busStopBaccess0'
<truncated after showing first 30 lines>
---------- Differences in log ----------
1,3d0
< Warning: Invalid format of parameter (dummyGenericParameters)
< Warning: Invalid format of parameter (key1)
< Warning: Invalid format of parameter (keyInvalid.;%>%$$=value1)
---------- Differences in output ----------
20c20
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <busStop id="busStopA" lane="gneE1_0" startPos="23.00" endPos="33.00">
        <access lane="gneE1_0" pos="10.00" length="10">
            <param key="keyFinal1" value="value1"/>
            <param key="keyFinal2" value="value2"/>
            <param key="keyFinal3" value="value3"/>
        </access>
    </busStop>
    <busStop id="busStopB" lane="gneE0_0" startPos="23.00" endPos="33.00">
        <access lane="gneE0_0" pos="20.00" length="20" friendlyPos="1">
            <param key="keyFinal1" value="value1"/>
            <param key="keyFinal2" value="value2"/>
            <param key="keyFinal3" value="value3"/>
        </access>
    </busStop>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="435.29" x="20.00" y="0.00" angle="0.00"/>
</viewsettings>
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>

    <edge id=":gneJ0_0" function="internal">
        <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
    </edge>
    <edge id=":gneJ1_0" function="internal">
        <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
    </edge>

    <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1">
        <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
    </edge>
    <edge id="gneE1" from="gneJ1" to="gneJ0" priority="1">
        <lane id="gneE1_0" index="0" speed="13.89" length="50.00" shape="50.00,1.60 0.00,1.60"/>
    </edge>

    <tlLogic id="gneJ0" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>
    <tlLogic id="gneJ1" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>

<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements access lock_unlock ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
6c6
<         <access lane="gneE1_0" pos="28.00"/>
---
>         <access lane="gneE1_0" pos="35.00"/>
---------- Differences in errors ----------
22,25d21
< Debug: Setting new attribute pos '28.00' into access 'busStop_gneE0_0_0access0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '35.00' into access 'busStop_gneE0_0_0access0'
37a34
> Debug: Keys Ctrl+Z (Undo) pressed
51,52d47
< Debug: Calling GNEUndoList::redo()
< Debug: Setting new attribute pos '28.00' into access 'busStop_gneE0_0_0access0'

TEST FAILED on ts-sim-winbuild-ba : additionalElements access move ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
6c6
<         <access lane="gneE1_0" pos="33.00"/>
---
>         <access lane="gneE1_0" pos="35.00"/>
---------- Differences in errors ----------
20,24c20,26
< Debug: Setting new attribute pos '28.00' into access 'busStop_gneE0_0_0access0'
< Debug: Setting new attribute pos '33.00' into access 'busStop_gneE0_0_0access0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '28.00' into access 'busStop_gneE0_0_0access0'
---
> GLDebug: 	Removed object edge:gneE1 from SUMORTree with boundary -10.00,-10.00,60.00,11.60
> GLDebug: 	Inserted edge:gneE1 into SUMORTree with boundary -10.00,-10.00,60.00,11.60
> Debug: Setting new attribute shape '13.36,5.89' into edge 'gneE1'
> GLDebug: 	Removed object edge:gneE1 from SUMORTree with boundary -10.00,-10.00,60.00,11.60
> GLDebug: 	Inserted edge:gneE1 into SUMORTree with boundary -10.65,-10.00,60.25,17.54
> Debug: net has to be saved
> Debug: Current saving Status: net unsaved, additionals unsaved, demand elements saved, data sets saved
27c29,31
< Debug: Setting previous attribute pos '35.00' into access 'busStop_gneE0_0_0access0'
---
> Debug: Setting previous attribute shape '' into edge 'gneE1'
> GLDebug: 	Removed object edge:gneE1 from SUMORTree with boundary -10.65,-10.00,60.25,17.54
> GLDebug: 	Inserted edge:gneE1 into SUMORTree with boundary -10.00,-10.00,60.00,11.60
33a38
> Debug: Keys Ctrl+Z (Undo) pressed
42c47,49
< Debug: Setting new attribute pos '28.00' into access 'busStop_gneE0_0_0access0'
---
> Debug: Setting new attribute shape '13.36,5.89' into edge 'gneE1'
> GLDebug: 	Removed object edge:gneE1 from SUMORTree with boundary -10.00,-10.00,60.00,11.60
> GLDebug: 	Inserted edge:gneE1 into SUMORTree with boundary -10.65,-10.00,60.25,17.54
44,45d50
< Debug: Calling GNEUndoList::redo()
<truncated after showing first 30 lines>
---------- Differences in net ----------
6c6
<     <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>
---
>     <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,5.89" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>
9c9
<         <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
---
>         <lane id=":gneJ0_0_0" index="0" speed="3.82" length="4.57" shape="-0.65,1.46 -1.63,0.46 -1.85,-0.39 -1.31,-1.08 0.00,-1.60"/>
12c12
<         <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
---
>         <lane id=":gneJ1_0_0" index="0" speed="3.72" length="4.66" shape="50.00,-1.60 51.26,-0.90 51.72,-0.14 51.38,0.69 50.25,1.58"/>
18,19c18,19
<     <edge id="gneE1" from="gneJ1" to="gneJ0" priority="1">
<         <lane id="gneE1_0" index="0" speed="13.89" length="50.00" shape="50.00,1.60 0.00,1.60"/>
---
>     <edge id="gneE1" from="gneJ1" to="gneJ0" priority="1" shape="50.00,0.00 13.36,5.89 0.00,0.00">
>         <lane id="gneE1_0" index="0" speed="13.89" length="52.66" shape="50.25,1.58 13.15,7.54 -0.65,1.46"/>
31c31
<     <junction id="gneJ0" type="traffic_light" x="0.00" y="0.00" incLanes="gneE1_0" intLanes=":gneJ0_0_0" shape="0.00,0.00 0.00,3.20 0.00,0.00">
---
>     <junction id="gneJ0" type="traffic_light" x="0.00" y="0.00" incLanes="gneE1_0" intLanes=":gneJ0_0_0" shape="0.00,0.00 0.00,-3.20 -1.29,2.93">
34c34
<     <junction id="gneJ1" type="traffic_light" x="50.00" y="0.00" incLanes="gneE0_0" intLanes=":gneJ1_0_0" shape="50.00,0.00 50.00,-3.20 50.00,0.00">
---
>     <junction id="gneJ1" type="traffic_light" x="50.00" y="0.00" incLanes="gneE0_0" intLanes=":gneJ1_0_0" shape="50.00,0.00 50.51,3.16 50.00,-3.20">

2 TESTS FAILED on ts-sim-winbuild-ba :

---------- Differences in additionals ----------
5,8c5,8
<     <busStop id="busStopA" lane="gneE0_0" startPos="11.90" endPos="12.00"/>
<     <busStop id="busStopB" lane="gneE0_0" startPos="38.00" endPos="50.00"/>
<     <busStop id="busStopC" lane="gneE1_0" startPos="12.00" endPos="48.00"/>
<     <busStop id="busStopD" lane="gneE1_0" startPos="37.90" endPos="38.00"/>
---
>     <busStop id="busStopA" lane="gneE0_0" startPos="11.90" endPos="12.00" friendlyPos="1"/>
>     <busStop id="busStopB" lane="gneE0_0" startPos="38.00" endPos="50.00" friendlyPos="1"/>
>     <busStop id="busStopC" lane="gneE1_0" startPos="12.00" endPos="48.00" friendlyPos="1"/>
>     <busStop id="busStopD" lane="gneE1_0" startPos="37.90" endPos="38.00" friendlyPos="1"/>
---------- Differences in errors ----------
16,36c16,17
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into busStop 'busStopA'
< Debug: Setting new attribute selected 'true' into busStop 'busStopB'
< Debug: Setting new attribute selected 'true' into busStop 'busStopC'
< Debug: Setting new attribute selected 'true' into busStop 'busStopD'
< Debug: Setting new attribute friendlyPos 'false' into busStop 'busStopA'
< Debug: Setting new attribute friendlyPos 'false' into busStop 'busStopB'
< Debug: Setting new attribute friendlyPos 'false' into busStop 'busStopC'
< Debug: Setting new attribute friendlyPos 'false' into busStop 'busStopD'
< Debug: Setting new attribute selected 'false' into junction 'gneJ0'
< Debug: Setting new attribute selected 'false' into edge 'gneE1'
< Debug: Setting new attribute selected 'false' into junction 'gneJ1'
< Debug: Setting new attribute selected 'false' into edge 'gneE0'
< Debug: Setting new attribute selected 'false' into busStop 'busStopA'
< Debug: Setting new attribute selected 'false' into busStop 'busStopB'
< Debug: Setting new attribute selected 'false' into busStop 'busStopC'
< Debug: Setting new attribute selected 'false' into busStop 'busStopD'
< Debug: Additionals saved after dialog
---
> Debug: Value ' s' for attribute lane of busStop isn't valid
> Debug: Additionals saved
additionalElements busstop fix fix_positions ( Last six runs Aug2020 Jul2020 )
additionalElements busstop fix save_invalids ( Last six runs Aug2020 Jul2020 )

TEST FAILED on ts-sim-winbuild-ba : additionalElements busstop fix friendlypos ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
6,8c6,8
<     <busStop id="busStopB" lane="gneE0_0" startPos="38.00" endPos="50.00"/>
<     <busStop id="busStopC" lane="gneE1_0" startPos="12.00" endPos="48.00"/>
<     <busStop id="busStopD" lane="gneE1_0" startPos="37.90" endPos="38.00"/>
---
>     <busStop id="busStopB" lane="gneE0_0" startPos="38.00" endPos="50.00" friendlyPos="1"/>
>     <busStop id="busStopC" lane="gneE1_0" startPos="12.00" endPos="48.00" friendlyPos="1"/>
>     <busStop id="busStopD" lane="gneE1_0" startPos="37.90" endPos="38.00" friendlyPos="1"/>
---------- Differences in errors ----------
16,37c16,17
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into busStop 'busStopA'
< Debug: Setting new attribute selected 'true' into busStop 'busStopB'
< Debug: Setting new attribute selected 'true' into busStop 'busStopC'
< Debug: Setting new attribute selected 'true' into busStop 'busStopD'
< Debug: Setting new attribute friendlyPos 'false' into busStop 'busStopA'
< Debug: Setting new attribute friendlyPos 'false' into busStop 'busStopB'
< Debug: Setting new attribute friendlyPos 'false' into busStop 'busStopC'
< Debug: Setting new attribute friendlyPos 'false' into busStop 'busStopD'
< Debug: Setting new attribute selected 'false' into junction 'gneJ0'
< Debug: Setting new attribute selected 'false' into edge 'gneE1'
< Debug: Setting new attribute selected 'false' into junction 'gneJ1'
< Debug: Setting new attribute selected 'false' into edge 'gneE0'
< Debug: Setting new attribute selected 'false' into busStop 'busStopA'
< Debug: Setting new attribute selected 'false' into busStop 'busStopB'
< Debug: Setting new attribute selected 'false' into busStop 'busStopC'
< Debug: Setting new attribute selected 'false' into busStop 'busStopD'
< Debug: Setting new attribute friendlyPos 'true' into busStop 'busStopA'
< Debug: Additionals saved after dialog
---
> Debug: Value ' s' for attribute lane of busStop isn't valid
> Debug: Additionals saved

TEST FAILED on ts-sim-winbuild-ba : additionalElements busstop fix select_invalids ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5,7c5,8
<     <busStop id="busStopB" lane="gneE0_0" startPos="38.00" endPos="50.00"/>
<     <busStop id="busStopC" lane="gneE1_0" startPos="12.00" endPos="48.00"/>
<     <busStop id="busStopD" lane="gneE1_0" startPos="37.90" endPos="38.00"/>
---
>     <busStop id="busStopA" lane="gneE0_0" startPos="11.90" endPos="12.00" friendlyPos="1"/>
>     <busStop id="busStopB" lane="gneE0_0" startPos="38.00" endPos="50.00" friendlyPos="1"/>
>     <busStop id="busStopC" lane="gneE1_0" startPos="12.00" endPos="48.00" friendlyPos="1"/>
>     <busStop id="busStopD" lane="gneE1_0" startPos="37.90" endPos="38.00" friendlyPos="1"/>
---------- Differences in errors ----------
16,40c16
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into busStop 'busStopA'
< Debug: Setting new attribute selected 'true' into busStop 'busStopB'
< Debug: Setting new attribute selected 'true' into busStop 'busStopC'
< Debug: Setting new attribute selected 'true' into busStop 'busStopD'
< Debug: Setting new attribute friendlyPos 'false' into busStop 'busStopA'
< Debug: Setting new attribute friendlyPos 'false' into busStop 'busStopB'
< Debug: Setting new attribute friendlyPos 'false' into busStop 'busStopC'
< Debug: Setting new attribute friendlyPos 'false' into busStop 'busStopD'
< Debug: Setting new attribute selected 'false' into junction 'gneJ0'
< Debug: Setting new attribute selected 'false' into edge 'gneE1'
< Debug: Setting new attribute selected 'false' into junction 'gneJ1'
< Debug: Setting new attribute selected 'false' into edge 'gneE0'
< Debug: Setting new attribute selected 'false' into busStop 'busStopA'
< Debug: Setting new attribute selected 'false' into busStop 'busStopB'
< Debug: Setting new attribute selected 'false' into busStop 'busStopC'
< Debug: Setting new attribute selected 'false' into busStop 'busStopD'
< Debug: Setting new attribute selected 'true' into busStop 'busStopA'
< Debug: Additionals saving aborted
< Debug: Key DEL (delete) pressed
< Debug: Removing busStop 'busStopA' in GNEChange_Additional
< Debug: Removed inspected element from Inspected ACs. 3 ACs remains.
---
> Debug: Value ' s' for attribute lane of busStop isn't valid

TEST FAILED on ts-sim-winbuild-ba : additionalElements busstop inspect_selection blockmove ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
15,34c15
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into busStop 'busStopA'
< Debug: Setting new attribute selected 'true' into busStop 'busStopB'
< Debug: Setting new attribute blockMovement 'true' into busStop 'busStopA'
< Debug: Setting new attribute blockMovement 'true' into busStop 'busStopB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute blockMovement '0' into busStop 'busStopB'
< Debug: Setting previous attribute blockMovement '0' into busStop 'busStopA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into busStop 'busStopB'
< Debug: Setting previous attribute selected '0' into busStop 'busStopA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value ' i' for attribute parkingLength of busStop isn't valid
38d18
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
40a21,22
> Debug: Keys Ctrl+Z (Undo) pressed
> Debug: Keys Ctrl+Z (Undo) pressed
46,52d27
< Debug: Calling GNEUndoList::redo()
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements busstop inspect_selection friendlypos ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
10c10
<     <busStop id="busStopB" lane="gneE0_0" startPos="15" endPos="20" name="busStop" friendlyPos="1" lines="line3 line4" personCapacity="20">
---
>     <busStop id="busStopB" lane="gneE0_0" startPos="15.00" endPos="20.00" name="busStop" lines="line3 line4" personCapacity="20">
---------- Differences in errors ----------
15,34c15,16
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into busStop 'busStopA'
< Debug: Setting new attribute selected 'true' into busStop 'busStopB'
< Debug: Setting new attribute friendlyPos 'true' into busStop 'busStopA'
< Debug: Setting new attribute friendlyPos 'true' into busStop 'busStopB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute friendlyPos '0' into busStop 'busStopB'
< Debug: Setting previous attribute friendlyPos '1' into busStop 'busStopA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into busStop 'busStopB'
< Debug: Setting previous attribute selected '0' into busStop 'busStopA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value 'true' for attribute lane of busStop isn't valid
> Debug: Value 'truei' for attribute lane of busStop isn't valid
38d19
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
40a22,23
> Debug: Keys Ctrl+Z (Undo) pressed
> Debug: Keys Ctrl+Z (Undo) pressed
46,52d28
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements busstop inspect_selection lines ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <busStop id="busStopA" lane="gneE0_0" startPos="5" endPos="10" name="busStop" friendlyPos="1" lines="commonLine1 commonLine2" personCapacity="10">
---
>     <busStop id="busStopA" lane="gneE0_0" startPos="5.00" endPos="10.00" name="busStop" friendlyPos="1" lines="line1 line2" personCapacity="10">
10c10
<     <busStop id="busStopB" lane="gneE0_0" startPos="15" endPos="20" name="busStop" lines="commonLine1 commonLine2" personCapacity="20">
---
>     <busStop id="busStopB" lane="gneE0_0" startPos="15.00" endPos="20.00" name="busStop" lines="line3 line4" personCapacity="20">
---------- Differences in errors ----------
15,34c15,16
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into busStop 'busStopA'
< Debug: Setting new attribute selected 'true' into busStop 'busStopB'
< Debug: Setting new attribute lines 'commonLine1 commonLine2' into busStop 'busStopA'
< Debug: Setting new attribute lines 'commonLine1 commonLine2' into busStop 'busStopB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute lines 'line3 line4' into busStop 'busStopB'
< Debug: Setting previous attribute lines 'line1 line2' into busStop 'busStopA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into busStop 'busStopB'
< Debug: Setting previous attribute selected '0' into busStop 'busStopA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value 'commonLine1 commonLine2' for attribute startPos of busStop isn't valid
> Debug: Value 'commonLine1 commonLine2i' for attribute startPos of busStop isn't valid
38d19
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
40a22,23
> Debug: Keys Ctrl+Z (Undo) pressed
> Debug: Keys Ctrl+Z (Undo) pressed
46,52d28
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements busstop inspect_selection name ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <busStop id="busStopA" lane="gneE0_0" startPos="5" endPos="10" name="common BusStop Name" friendlyPos="1" lines="line1 line2" personCapacity="10">
---
>     <busStop id="busStopA" lane="gneE0_0" startPos="5.00" endPos="10.00" name="busStop" friendlyPos="1" lines="line1 line2" personCapacity="10">
10c10
<     <busStop id="busStopB" lane="gneE0_0" startPos="15" endPos="20" name="common BusStop Name" lines="line3 line4" personCapacity="20">
---
>     <busStop id="busStopB" lane="gneE0_0" startPos="15.00" endPos="20.00" name="busStop" lines="line3 line4" personCapacity="20">
---------- Differences in errors ----------
15,34c15,16
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into busStop 'busStopA'
< Debug: Setting new attribute selected 'true' into busStop 'busStopB'
< Debug: Setting new attribute name 'common BusStop Name' into busStop 'busStopA'
< Debug: Setting new attribute name 'common BusStop Name' into busStop 'busStopB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute name 'busStop' into busStop 'busStopB'
< Debug: Setting previous attribute name 'busStop' into busStop 'busStopA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into busStop 'busStopB'
< Debug: Setting previous attribute selected '0' into busStop 'busStopA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value 'common BusStop Name' for attribute id of busStop isn't valid
> Debug: Value 'common BusStop Namei' for attribute id of busStop isn't valid
38d19
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
40a22,23
> Debug: Keys Ctrl+Z (Undo) pressed
> Debug: Keys Ctrl+Z (Undo) pressed
46,52d28
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements busstop inspect_selection parameters ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5,8c5,8
<     <busStop id="busStopA" lane="gneE0_0" startPos="5" endPos="10" name="busStop" friendlyPos="1" lines="line1 line2" personCapacity="10">
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>     <busStop id="busStopA" lane="gneE0_0" startPos="5.00" endPos="10.00" name="busStop" friendlyPos="1" lines="keyFinal1=value1|keyFinal2=value2|keyFinal3=value3" personCapacity="10">
>         <param key="KeyA1" value="valueA1"/>
>         <param key="KeyA2" value="valueA3"/>
>         <param key="KeyA3" value="valueA2"/>
11,13c11,13
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>         <param key="KeyB1" value="valueB1"/>
>         <param key="KeyB2" value="valueB3"/>
>         <param key="KeyB3" value="valueB2"/>
---------- Differences in errors ----------
15,34c15,24
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into busStop 'busStopA'
< Debug: Setting new attribute selected 'true' into busStop 'busStopB'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into busStop 'busStopA'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into busStop 'busStopB'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into busStop 'busStopA'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into busStop 'busStopB'
< Debug: Setting new attribute genericParameter '' into busStop 'busStopA'
< Debug: Setting new attribute genericParameter '' into busStop 'busStopB'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into busStop 'busStopA'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into busStop 'busStopB'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into busStop 'busStopA'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into busStop 'busStopB'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into busStop 'busStopA'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into busStop 'busStopB'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into busStop 'busStopA'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into busStop 'busStopB'
---
> Debug: Setting new attribute lines 'dummyGenericParameters' into busStop 'busStopA'
> Debug: Setting new attribute lines 'key1|key2|key3' into busStop 'busStopA'
> Debug: Setting new attribute lines 'key1=value1|key2=value2|key3=value3' into busStop 'busStopA'
> Debug: Setting new attribute lines 'key1=|key2=|key3=' into busStop 'busStopA'
> Debug: Setting new attribute lines '' into busStop 'busStopA'
> Debug: Setting new attribute lines 'key1duplicated=value1|key1duplicated=value2|key3=value3' into busStop 'busStopA'
> Debug: Setting new attribute lines 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into busStop 'busStopA'
> Debug: Setting new attribute lines 'keyInvalid.;%>%$$=value1|key2=value2|key3=value3' into busStop 'busStopA'
<truncated after showing first 30 lines>
---------- Differences in log ----------
1,3d0
< Warning: Invalid format of parameter (dummyGenericParameters)
< Warning: Invalid format of parameter (key1)
< Warning: Invalid format of parameter (keyInvalid.;%>%$$=value1)

TEST FAILED on ts-sim-winbuild-ba : additionalElements busstop inspect_selection personcapacity ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <busStop id="busStopA" lane="gneE0_0" startPos="5" endPos="10" name="busStop" friendlyPos="1" lines="line1 line2" personCapacity="50">
---
>     <busStop id="busStopA" lane="gneE0_0" startPos="5.00" endPos="50.00" name="busStop" friendlyPos="1" lines="line1 line2" personCapacity="10">
10c10
<     <busStop id="busStopB" lane="gneE0_0" startPos="15" endPos="20" name="busStop" lines="line3 line4" personCapacity="50">
---
>     <busStop id="busStopB" lane="gneE0_0" startPos="15.00" endPos="20.00" name="busStop" lines="line3 line4" personCapacity="20">
---------- Differences in errors ----------
15,22c15
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into busStop 'busStopA'
< Debug: Setting new attribute selected 'true' into busStop 'busStopB'
< Debug: Setting new attribute personCapacity '50' into busStop 'busStopA'
< Debug: Setting new attribute personCapacity '50' into busStop 'busStopB'
---
> Debug: Setting new attribute endPos '50' into busStop 'busStopA'
25,34c18
< Debug: Setting previous attribute personCapacity '20' into busStop 'busStopB'
< Debug: Setting previous attribute personCapacity '10' into busStop 'busStopA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into busStop 'busStopB'
< Debug: Setting previous attribute selected '0' into busStop 'busStopA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Setting previous attribute endPos '10.00' into busStop 'busStopA'
38d21
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
40a24
> Debug: Keys Ctrl+Z (Undo) pressed
47,52c31
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements busstop load parkingLength ( Last six runs Aug2020 Jul2020 )

---------- Differences in output ----------
0a1,4
> TestFunctions: Netedit opened successfully
> Finding reference
> TestFunctions: 'reference.png' found. Position: 304 - 168
> TestFunctions: Netedit closed successfully
---------- New result in errors ----------
GLDebug: initJunctionsAndEdges function called in GNENet constructor
GLDebug: 	Inserted junction:gneJ0 into SUMORTree with boundary -12.00,-12.00,12.00,12.00
GLDebug: 	Inserted junction:gneJ1 into SUMORTree with boundary 38.00,-12.00,62.00,12.00
GLDebug: 	Inserted edge:gneE0 into SUMORTree with boundary -10.00,-11.60,60.00,10.00
GLDebug: 	Inserted edge:gneE1 into SUMORTree with boundary -10.00,-10.00,60.00,11.60
Debug: Selected item 'DEFAULT_VEHTYPE' in DemandElementSelector
Debug: Selected item 'DEFAULT_PEDTYPE' in DemandElementSelector
Debug: net has to be saved
Debug: Current saving Status: net unsaved, additionals saved, demand elements saved, data sets saved
GLDebug: Removing junctions during recomputing
GLDebug: 	Removed object junction:gneJ0 from SUMORTree with boundary -12.00,-12.00,12.00,12.00
GLDebug: 	Removed object junction:gneJ1 from SUMORTree with boundary 38.00,-12.00,62.00,12.00
GLDebug: Removing edges during recomputing
GLDebug: 	Removed object edge:gneE0 from SUMORTree with boundary -10.00,-11.60,60.00,10.00
GLDebug: 	Removed object edge:gneE1 from SUMORTree with boundary -10.00,-10.00,60.00,11.60
GLDebug: Add junctions during recomputing after calling myNetBuilder->compute(...)
GLDebug: 	Inserted junction:gneJ0 into SUMORTree with boundary -10.00,-13.20,10.00,13.20
GLDebug: 	Inserted junction:gneJ1 into SUMORTree with boundary 40.00,-13.20,60.00,13.20
GLDebug: Add edges during recomputing after calling myNetBuilder->compute(...)
GLDebug: 	Inserted edge:gneE0 into SUMORTree with boundary -10.00,-11.60,60.00,10.00
GLDebug: 	Inserted edge:gneE1 into SUMORTree with boundary -10.00,-10.00,60.00,11.60
Debug: Created connection 'fromgneE0_0togneE1_0' in retrieveGNEConnection()
Debug: Created connection 'fromgneE1_0togneE0_0' in retrieveGNEConnection()
Debug: Deleting unreferenced edge 'gneE0' in AttributeCarriers destructor
Debug: Deleting unreferenced lane 'gneE0_0' in GNEEdge destructor
Debug: Deleting unreferenced connection 'fromgneE0_0togneE1_0' in GNEEdge destructor
Debug: Deleting unreferenced edge 'gneE1' in AttributeCarriers destructor
Debug: Deleting unreferenced lane 'gneE1_0' in GNEEdge destructor
Debug: Deleting unreferenced connection 'fromgneE1_0togneE0_0' in GNEEdge destructor
Debug: Deleting unreferenced junction 'gneJ0' in AttributeCarriers destructor
<truncated after showing first 30 lines>
---------- New result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>
---------- New result in log ----------
---------- New result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>

    <edge id=":gneJ0_0" function="internal">
        <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
    </edge>
    <edge id=":gneJ1_0" function="internal">
        <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
    </edge>

    <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1">
        <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
    </edge>
    <edge id="gneE1" from="gneJ1" to="gneJ0" priority="1">
        <lane id="gneE1_0" index="0" speed="13.89" length="50.00" shape="50.00,1.60 0.00,1.60"/>
    </edge>

    <tlLogic id="gneJ0" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>
    <tlLogic id="gneJ1" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>

<truncated after showing first 30 lines>
---------- Missing result in exitcode ----------
2

TEST FAILED on ts-sim-winbuild-ba : additionalElements busstop lock_unlock ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <busStop id="busStop_gneE0_0_0" lane="gneE0_0" startPos="28.00" endPos="38.00"/>
---
>     <busStop id="busStop_gneE0_0_0" lane="gneE0_0" startPos="12.00" endPos="22.00"/>
---------- Differences in errors ----------
11,12d10
< Debug: Setting new attribute startPos '20.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting new attribute endPos '30.00' into busStop 'busStop_gneE0_0_0'
14,16d11
< Debug: Setting new attribute blockMovement 'false' into busStop 'busStop_gneE0_0_0'
< Debug: Setting new attribute startPos '28.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting new attribute endPos '38.00' into busStop 'busStop_gneE0_0_0'
19,20c14
< Debug: Setting previous attribute endPos '30.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting previous attribute startPos '20.00' into busStop 'busStop_gneE0_0_0'
---
> Debug: Setting previous attribute blockMovement '0' into busStop 'busStop_gneE0_0_0'
23c17
< Debug: Setting previous attribute blockMovement '1' into busStop 'busStop_gneE0_0_0'
---
> Debug: Removing busStop 'busStop_gneE0_0_0' in GNEChange_Additional
25,26d18
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute blockMovement '0' into busStop 'busStop_gneE0_0_0'
28,30d19
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute endPos '22.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting previous attribute startPos '12.00' into busStop 'busStop_gneE0_0_0'
32,33d20
< Debug: Calling GNEUndoList::undo()
< Debug: Removing busStop 'busStop_gneE0_0_0' in GNEChange_Additional
39,42d25
< Debug: Setting new attribute startPos '20.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting new attribute endPos '30.00' into busStop 'busStop_gneE0_0_0'
< Debug: Keys Ctrl+Y (Redo) pressed
<truncated after showing first 30 lines>
---------- Differences in guisettingsoutput ----------
2c2
<     <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
---
>     <viewport zoom="100.00" x="-6.71" y="0.00" angle="0.00"/>

TEST FAILED on ts-sim-winbuild-ba : additionalElements busstop move ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <busStop id="busStop_gneE0_0_0" lane="gneE0_0" startPos="25.00" endPos="35.00"/>
---
>     <busStop id="busStop_gneE0_0_0" lane="gneE0_0" startPos="12.00" endPos="22.00"/>
---------- Differences in errors ----------
11,26d10
< Debug: Setting new attribute startPos '4.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting new attribute endPos '14.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting new attribute startPos '12.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting new attribute endPos '22.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting new attribute startPos '20.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting new attribute endPos '30.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting new attribute startPos '12.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting new attribute endPos '22.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting new attribute startPos '0.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting new attribute endPos '10.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting new attribute startPos '18.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting new attribute endPos '28.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting new attribute startPos '40.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting new attribute endPos '50.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting new attribute startPos '25.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting new attribute endPos '35.00' into busStop 'busStop_gneE0_0_0'
29,30c13
< Debug: Setting previous attribute endPos '50.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting previous attribute startPos '40.00' into busStop 'busStop_gneE0_0_0'
---
> Debug: Removing busStop 'busStop_gneE0_0_0' in GNEChange_Additional
32,34d14
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute endPos '28.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting previous attribute startPos '18.00' into busStop 'busStop_gneE0_0_0'
36,38d15
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute endPos '10.00' into busStop 'busStop_gneE0_0_0'
< Debug: Setting previous attribute startPos '0.00' into busStop 'busStop_gneE0_0_0'
<truncated after showing first 30 lines>
---------- Differences in guisettingsoutput ----------
2c2
<     <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
---
>     <viewport zoom="100.00" x="30.29" y="0.00" angle="0.00"/>

TEST FAILED on ts-sim-winbuild-ba : additionalElements calibrator inspect_selection freq ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
8c8
<     <calibrator id="calibratorA" edge="gneE2" pos="20.00" freq="12.50" name="NameA" routeProbe="RouteProbeA" output="fileA.txt">
---
>     <calibrator id="calibratorA" edge="gneE2" pos="20.00" freq="30.00" name="NameA" routeProbe="RouteProbeA" output="fileA.txt">
13c13
<     <calibrator id="calibratorB" edge="gneE3" pos="30.00" freq="12.50" name="NameB" routeProbe="RouteProbeB" output="fileB.txt">
---
>     <calibrator id="calibratorB" edge="gneE3" pos="30.00" freq="40.00" name="NameB" routeProbe="RouteProbeB" output="fileB.txt">
---------- Differences in errors ----------
18,53c18,21
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into junction 'gneJ3'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into calibrator 'calibratorA'
< Debug: Setting new attribute selected 'true' into calibrator 'calibratorB'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeA'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeB'
< Debug: Setting new attribute selected 'true' into routeProbe 'customRouteProbeName'
< Debug: Value 'dummyFreq' for attribute freq of calibrator isn't valid
< Debug: Value '-12' for attribute freq of calibrator isn't valid
< Debug: Setting new attribute freq '12.5' into calibrator 'calibratorA'
< Debug: Setting new attribute freq '12.5' into calibrator 'calibratorB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute freq '40.00' into calibrator 'calibratorB'
< Debug: Setting previous attribute freq '30.00' into calibrator 'calibratorA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into routeProbe 'customRouteProbeName'
< Debug: Setting previous attribute selected '0' into routeProbe 'RouteProbeB'
< Debug: Setting previous attribute selected '0' into routeProbe 'RouteProbeA'
< Debug: Setting previous attribute selected '0' into calibrator 'calibratorB'
< Debug: Setting previous attribute selected '0' into calibrator 'calibratorA'
< Debug: Setting previous attribute selected '0' into edge 'gneE2'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements calibrator inspect_selection name ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
8c8
<     <calibrator id="calibratorA" edge="gneE2" pos="20.00" freq="30.00" name="customName" routeProbe="RouteProbeA" output="fileA.txt">
---
>     <calibrator id="calibratorA" edge="gneE2" pos="20.00" freq="30.00" name="NameA" routeProbe="RouteProbeA" output="fileA.txt">
13c13
<     <calibrator id="calibratorB" edge="gneE3" pos="30.00" freq="40.00" name="customName" routeProbe="RouteProbeB" output="fileB.txt">
---
>     <calibrator id="calibratorB" edge="gneE3" pos="30.00" freq="40.00" name="NameB" routeProbe="RouteProbeB" output="fileB.txt">
---------- Differences in errors ----------
18,52c18,20
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into junction 'gneJ3'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into calibrator 'calibratorA'
< Debug: Setting new attribute selected 'true' into calibrator 'calibratorB'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeA'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeB'
< Debug: Setting new attribute selected 'true' into routeProbe 'customRouteProbeName'
< Debug: Value '///' for attribute name of calibrator isn't valid
< Debug: Setting new attribute name 'customName' into calibrator 'calibratorA'
< Debug: Setting new attribute name 'customName' into calibrator 'calibratorB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute name 'NameB' into calibrator 'calibratorB'
< Debug: Setting previous attribute name 'NameA' into calibrator 'calibratorA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into routeProbe 'customRouteProbeName'
< Debug: Setting previous attribute selected '0' into routeProbe 'RouteProbeB'
< Debug: Setting previous attribute selected '0' into routeProbe 'RouteProbeA'
< Debug: Setting previous attribute selected '0' into calibrator 'calibratorB'
< Debug: Setting previous attribute selected '0' into calibrator 'calibratorA'
< Debug: Setting previous attribute selected '0' into edge 'gneE2'
< Debug: Setting previous attribute selected '0' into junction 'gneJ3'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements calibrator inspect_selection output ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
8c8
<     <calibrator id="calibratorA" edge="gneE2" pos="20.00" freq="30.00" name="NameA" routeProbe="RouteProbeA" output="myOwnFilename">
---
>     <calibrator id="calibratorA" edge="gneE2" pos="20.00" freq="30.00" name="NameA" routeProbe="RouteProbeA" output="fileA.txt">
13c13
<     <calibrator id="calibratorB" edge="gneE3" pos="30.00" freq="40.00" name="NameB" routeProbe="RouteProbeB" output="myOwnFilename">
---
>     <calibrator id="calibratorB" edge="gneE3" pos="30.00" freq="40.00" name="myOwnFilename" routeProbe="RouteProbeB" output="fileB.txt">
---------- Differences in errors ----------
18,33c18,19
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into junction 'gneJ3'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into calibrator 'calibratorA'
< Debug: Setting new attribute selected 'true' into calibrator 'calibratorB'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeA'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeB'
< Debug: Setting new attribute selected 'true' into routeProbe 'customRouteProbeName'
< Debug: Value '///;;' for attribute output of calibrator isn't valid
< Debug: Setting new attribute output 'myOwnFilename' into calibrator 'calibratorA'
< Debug: Setting new attribute output 'myOwnFilename' into calibrator 'calibratorB'
---
> Debug: Value '///;;' for attribute name of calibrator isn't valid
> Debug: Setting new attribute name 'myOwnFilename' into calibrator 'calibratorB'
36,52c22
< Debug: Setting previous attribute output 'fileB.txt' into calibrator 'calibratorB'
< Debug: Setting previous attribute output 'fileA.txt' into calibrator 'calibratorA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into routeProbe 'customRouteProbeName'
< Debug: Setting previous attribute selected '0' into routeProbe 'RouteProbeB'
< Debug: Setting previous attribute selected '0' into routeProbe 'RouteProbeA'
< Debug: Setting previous attribute selected '0' into calibrator 'calibratorB'
< Debug: Setting previous attribute selected '0' into calibrator 'calibratorA'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements calibrator inspect_selection parameters ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
9,11c9,11
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>         <param key="KeyA1" value="valueA1"/>
>         <param key="KeyA2" value="valueA3"/>
>         <param key="KeyA3" value="valueA2"/>
13,16c13,16
<     <calibrator id="calibratorB" edge="gneE3" pos="30.00" freq="40.00" name="NameB" routeProbe="RouteProbeB" output="fileB.txt">
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>     <calibrator id="calibratorB" edge="gneE3" pos="30.00" freq="40.00" name="NameB" routeProbe="RouteProbeB">
>         <param key="KeyB1" value="valueB1"/>
>         <param key="KeyB2" value="valueB3"/>
>         <param key="KeyB3" value="valueB2"/>
---------- Differences in errors ----------
18,44c18,28
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into junction 'gneJ3'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into calibrator 'calibratorA'
< Debug: Setting new attribute selected 'true' into calibrator 'calibratorB'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeA'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeB'
< Debug: Setting new attribute selected 'true' into routeProbe 'customRouteProbeName'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into calibrator 'calibratorA'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into calibrator 'calibratorB'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into calibrator 'calibratorA'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into calibrator 'calibratorB'
< Debug: Setting new attribute genericParameter '' into calibrator 'calibratorA'
< Debug: Setting new attribute genericParameter '' into calibrator 'calibratorB'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into calibrator 'calibratorA'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into calibrator 'calibratorB'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into calibrator 'calibratorA'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into calibrator 'calibratorB'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into calibrator 'calibratorA'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into calibrator 'calibratorB'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into calibrator 'calibratorA'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into calibrator 'calibratorB'
---
> Debug: Setting new attribute output 'dummyGenericParameters' into calibrator 'calibratorB'
<truncated after showing first 30 lines>
---------- Differences in log ----------
1,3d0
< Warning: Invalid format of parameter (dummyGenericParameters)
< Warning: Invalid format of parameter (key1)
< Warning: Invalid format of parameter (keyInvalid.;%>%$$=value1)

TEST FAILED on ts-sim-winbuild-ba : additionalElements calibrator inspect_selection pos ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
8,13c8
<     <calibrator id="calibratorA" edge="gneE2" pos="10.00" freq="30.00" name="NameA" routeProbe="RouteProbeA" output="fileA.txt">
<         <param key="KeyA1" value="valueA1"/>
<         <param key="KeyA2" value="valueA3"/>
<         <param key="KeyA3" value="valueA2"/>
<     </calibrator>
<     <calibrator id="calibratorB" edge="gneE3" pos="10.00" freq="40.00" name="NameB" routeProbe="RouteProbeB" output="fileB.txt">
---
>     <calibrator id="10" edge="gneE3" pos="30.00" freq="40.00" name="NameB" routeProbe="RouteProbeB" output="fileB.txt">
16a12,16
>     </calibrator>
>     <calibrator id="calibratorA" edge="gneE2" pos="20.00" freq="30.00" name="NameA" routeProbe="RouteProbeA" output="fileA.txt">
>         <param key="KeyA1" value="valueA1"/>
>         <param key="KeyA2" value="valueA3"/>
>         <param key="KeyA3" value="valueA2"/>
---------- Differences in errors ----------
27,44c27,30
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into junction 'gneJ3'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into calibrator 'calibratorA'
< Debug: Setting new attribute selected 'true' into calibrator 'calibratorB'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeA'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeB'
< Debug: Setting new attribute selected 'true' into routeProbe 'customRouteProbeName'
< Debug: Value 'dummyPos' for attribute pos of calibrator isn't valid
< Debug: Value '-12' for attribute pos of calibrator isn't valid
< Debug: Value '5000' for attribute pos of calibrator isn't valid
< Debug: Setting new attribute pos '10' into calibrator 'calibratorA'
< Debug: Setting new attribute pos '10' into calibrator 'calibratorB'
---
> Debug: Setting new attribute id 'dummyPos' into calibrator 'calibratorB'
> Debug: Setting new attribute id '-12' into calibrator 'dummyPos'
> Debug: Setting new attribute id '5000' into calibrator '-12'
> Debug: Setting new attribute id '10' into calibrator '5000'
47,48c33
< Debug: Setting previous attribute pos '30.00' into calibrator 'calibratorB'
< Debug: Setting previous attribute pos '20.00' into calibrator 'calibratorA'
---
> Debug: Setting previous attribute id '5000' into calibrator '10'
51,63c36
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements calibrator inspect_selection routeprobe ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
8c8
<     <calibrator id="calibratorA" edge="gneE2" pos="20.00" freq="30.00" name="NameA" routeProbe="customRouteProbeName" output="fileA.txt">
---
>     <calibrator id="calibratorA" edge="gneE2" pos="20.00" freq="30.00" name="NameA" routeProbe="RouteProbeA" output="fileA.txt">
13c13
<     <calibrator id="calibratorB" edge="gneE3" pos="30.00" freq="40.00" name="NameB" routeProbe="customRouteProbeName" output="fileB.txt">
---
>     <calibrator id="calibratorB" edge="gneE3" pos="30.00" freq="40.00" name="NameB" routeProbe="RouteProbeB" output="fileB.txt">
---------- Differences in errors ----------
18,52c18,20
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into junction 'gneJ3'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into calibrator 'calibratorA'
< Debug: Setting new attribute selected 'true' into calibrator 'calibratorB'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeA'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeB'
< Debug: Setting new attribute selected 'true' into routeProbe 'customRouteProbeName'
< Debug: Value '///;;' for attribute routeProbe of calibrator isn't valid
< Debug: Setting new attribute routeProbe 'customRouteProbeName' into calibrator 'calibratorA'
< Debug: Setting new attribute routeProbe 'customRouteProbeName' into calibrator 'calibratorB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute routeProbe 'RouteProbeB' into calibrator 'calibratorB'
< Debug: Setting previous attribute routeProbe 'RouteProbeA' into calibrator 'calibratorA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into routeProbe 'customRouteProbeName'
< Debug: Setting previous attribute selected '0' into routeProbe 'RouteProbeB'
< Debug: Setting previous attribute selected '0' into routeProbe 'RouteProbeA'
< Debug: Setting previous attribute selected '0' into calibrator 'calibratorB'
< Debug: Setting previous attribute selected '0' into calibrator 'calibratorA'
< Debug: Setting previous attribute selected '0' into edge 'gneE2'
< Debug: Setting previous attribute selected '0' into junction 'gneJ3'
<truncated after showing first 30 lines>

2 TESTS FAILED on ts-sim-winbuild-ba :

---------- Differences in additionals ----------
5,8c5,8
<     <chargingStation id="chargingStationA" lane="gneE0_0" startPos="11.90" endPos="12.00"/>
<     <chargingStation id="chargingStationB" lane="gneE0_0" startPos="38.00" endPos="50.00"/>
<     <chargingStation id="chargingStationC" lane="gneE1_0" startPos="12.00" endPos="48.00"/>
<     <chargingStation id="chargingStationD" lane="gneE1_0" startPos="37.90" endPos="38.00"/>
---
>     <chargingStation id="chargingStationA" lane="gneE0_0" startPos="11.90" endPos="12.00" friendlyPos="1"/>
>     <chargingStation id="chargingStationB" lane="gneE0_0" startPos="38.00" endPos="50.00" friendlyPos="1"/>
>     <chargingStation id="chargingStationC" lane="gneE1_0" startPos="12.00" endPos="48.00" friendlyPos="1"/>
>     <chargingStation id="chargingStationD" lane="gneE1_0" startPos="37.90" endPos="38.00" friendlyPos="1"/>
---------- Differences in errors ----------
16,36c16,17
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationA'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationB'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationC'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationD'
< Debug: Setting new attribute friendlyPos 'false' into chargingStation 'chargingStationA'
< Debug: Setting new attribute friendlyPos 'false' into chargingStation 'chargingStationB'
< Debug: Setting new attribute friendlyPos 'false' into chargingStation 'chargingStationC'
< Debug: Setting new attribute friendlyPos 'false' into chargingStation 'chargingStationD'
< Debug: Setting new attribute selected 'false' into junction 'gneJ0'
< Debug: Setting new attribute selected 'false' into edge 'gneE1'
< Debug: Setting new attribute selected 'false' into junction 'gneJ1'
< Debug: Setting new attribute selected 'false' into edge 'gneE0'
< Debug: Setting new attribute selected 'false' into chargingStation 'chargingStationA'
< Debug: Setting new attribute selected 'false' into chargingStation 'chargingStationB'
< Debug: Setting new attribute selected 'false' into chargingStation 'chargingStationC'
< Debug: Setting new attribute selected 'false' into chargingStation 'chargingStationD'
< Debug: Additionals saved after dialog
---
> Debug: Value ' s' for attribute lane of chargingStation isn't valid
> Debug: Additionals saved
additionalElements chargingstation fix fix_positions ( Last six runs Aug2020 Jul2020 )
additionalElements chargingstation fix save_invalids ( Last six runs Aug2020 Jul2020 )

TEST FAILED on ts-sim-winbuild-ba : additionalElements chargingstation fix friendlypos ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
6,8c6,8
<     <chargingStation id="chargingStationB" lane="gneE0_0" startPos="38.00" endPos="50.00"/>
<     <chargingStation id="chargingStationC" lane="gneE1_0" startPos="12.00" endPos="48.00"/>
<     <chargingStation id="chargingStationD" lane="gneE1_0" startPos="37.90" endPos="38.00"/>
---
>     <chargingStation id="chargingStationB" lane="gneE0_0" startPos="38.00" endPos="50.00" friendlyPos="1"/>
>     <chargingStation id="chargingStationC" lane="gneE1_0" startPos="12.00" endPos="48.00" friendlyPos="1"/>
>     <chargingStation id="chargingStationD" lane="gneE1_0" startPos="37.90" endPos="38.00" friendlyPos="1"/>
---------- Differences in errors ----------
16,37c16,17
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationA'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationB'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationC'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationD'
< Debug: Setting new attribute friendlyPos 'false' into chargingStation 'chargingStationA'
< Debug: Setting new attribute friendlyPos 'false' into chargingStation 'chargingStationB'
< Debug: Setting new attribute friendlyPos 'false' into chargingStation 'chargingStationC'
< Debug: Setting new attribute friendlyPos 'false' into chargingStation 'chargingStationD'
< Debug: Setting new attribute selected 'false' into junction 'gneJ0'
< Debug: Setting new attribute selected 'false' into edge 'gneE1'
< Debug: Setting new attribute selected 'false' into junction 'gneJ1'
< Debug: Setting new attribute selected 'false' into edge 'gneE0'
< Debug: Setting new attribute selected 'false' into chargingStation 'chargingStationA'
< Debug: Setting new attribute selected 'false' into chargingStation 'chargingStationB'
< Debug: Setting new attribute selected 'false' into chargingStation 'chargingStationC'
< Debug: Setting new attribute selected 'false' into chargingStation 'chargingStationD'
< Debug: Setting new attribute friendlyPos 'true' into chargingStation 'chargingStationA'
< Debug: Additionals saved after dialog
---
> Debug: Value ' s' for attribute lane of chargingStation isn't valid
> Debug: Additionals saved

TEST FAILED on ts-sim-winbuild-ba : additionalElements chargingstation fix select_invalids ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5,7c5,8
<     <chargingStation id="chargingStationB" lane="gneE0_0" startPos="38.00" endPos="50.00"/>
<     <chargingStation id="chargingStationC" lane="gneE1_0" startPos="12.00" endPos="48.00"/>
<     <chargingStation id="chargingStationD" lane="gneE1_0" startPos="37.90" endPos="38.00"/>
---
>     <chargingStation id="chargingStationA" lane="gneE0_0" startPos="11.90" endPos="12.00" friendlyPos="1"/>
>     <chargingStation id="chargingStationB" lane="gneE0_0" startPos="38.00" endPos="50.00" friendlyPos="1"/>
>     <chargingStation id="chargingStationC" lane="gneE1_0" startPos="12.00" endPos="48.00" friendlyPos="1"/>
>     <chargingStation id="chargingStationD" lane="gneE1_0" startPos="37.90" endPos="38.00" friendlyPos="1"/>
---------- Differences in errors ----------
16,40c16
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationA'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationB'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationC'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationD'
< Debug: Setting new attribute friendlyPos 'false' into chargingStation 'chargingStationA'
< Debug: Setting new attribute friendlyPos 'false' into chargingStation 'chargingStationB'
< Debug: Setting new attribute friendlyPos 'false' into chargingStation 'chargingStationC'
< Debug: Setting new attribute friendlyPos 'false' into chargingStation 'chargingStationD'
< Debug: Setting new attribute selected 'false' into junction 'gneJ0'
< Debug: Setting new attribute selected 'false' into edge 'gneE1'
< Debug: Setting new attribute selected 'false' into junction 'gneJ1'
< Debug: Setting new attribute selected 'false' into edge 'gneE0'
< Debug: Setting new attribute selected 'false' into chargingStation 'chargingStationA'
< Debug: Setting new attribute selected 'false' into chargingStation 'chargingStationB'
< Debug: Setting new attribute selected 'false' into chargingStation 'chargingStationC'
< Debug: Setting new attribute selected 'false' into chargingStation 'chargingStationD'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationA'
< Debug: Additionals saving aborted
< Debug: Key DEL (delete) pressed
< Debug: Removing chargingStation 'chargingStationA' in GNEChange_Additional
< Debug: Removed inspected element from Inspected ACs. 3 ACs remains.
---
> Debug: Value ' s' for attribute lane of chargingStation isn't valid

TEST FAILED on ts-sim-winbuild-ba : additionalElements chargingstation inspect_selection blockmove ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
15,34c15
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationA'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationB'
< Debug: Setting new attribute blockMovement 'true' into chargingStation 'chargingStationA'
< Debug: Setting new attribute blockMovement 'true' into chargingStation 'chargingStationB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute blockMovement '0' into chargingStation 'chargingStationB'
< Debug: Setting previous attribute blockMovement '0' into chargingStation 'chargingStationA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into chargingStation 'chargingStationB'
< Debug: Setting previous attribute selected '0' into chargingStation 'chargingStationA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value ' i' for attribute chargeDelay of chargingStation isn't valid
38d18
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
40a21,22
> Debug: Keys Ctrl+Z (Undo) pressed
> Debug: Keys Ctrl+Z (Undo) pressed
46,52d27
< Debug: Calling GNEUndoList::redo()
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements chargingstation inspect_selection chargedelay ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
15,79c15
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationA'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationB'
< Debug: Value 'dummyChargeDelay' for attribute chargeDelay of chargingStation isn't valid
< Debug: Value '-2' for attribute chargeDelay of chargingStation isn't valid
< Debug: Setting new attribute chargeDelay '6.3' into chargingStation 'chargingStationA'
< Debug: Setting new attribute chargeDelay '6.3' into chargingStation 'chargingStationB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute chargeDelay '2.00' into chargingStation 'chargingStationB'
< Debug: Setting previous attribute chargeDelay '0.00' into chargingStation 'chargingStationA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into chargingStation 'chargingStationB'
< Debug: Setting previous attribute selected '0' into chargingStation 'chargingStationA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Removing chargingStation 'chargingStationB' in GNEChange_Additional
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
< Debug: Removing chargingStation 'chargingStationA' in GNEChange_Additional
< Debug: Removed inspected element from Inspected ACs. 0 ACs remains.
< Debug: Keys Ctrl+Z (Undo) pressed
<truncated after showing first 30 lines>
---------- Differences in output ----------
10c10
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <chargingStation id="chargingStationA" lane="gneE0_0" startPos="5" endPos="10" name="chargingStation" chargeDelay="6.30">
        <param key="KeyA1" value="valueA1"/>
        <param key="KeyA2" value="valueA3"/>
        <param key="KeyA3" value="valueA2"/>
    </chargingStation>
    <chargingStation id="chargingStationB" lane="gneE0_0" startPos="15" endPos="20" name="chargingStation" friendlyPos="1" power="13000.00" efficiency="0.85" chargeInTransit="1" chargeDelay="6.30">
        <param key="KeyB1" value="valueB1"/>
        <param key="KeyB2" value="valueB3"/>
        <param key="KeyB3" value="valueB2"/>
    </chargingStation>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>

    <edge id=":gneJ0_0" function="internal">
        <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
    </edge>
    <edge id=":gneJ1_0" function="internal">
        <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
    </edge>

    <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1">
        <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
    </edge>
    <edge id="gneE1" from="gneJ1" to="gneJ0" priority="1">
        <lane id="gneE1_0" index="0" speed="13.89" length="50.00" shape="50.00,1.60 0.00,1.60"/>
    </edge>

    <tlLogic id="gneJ0" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>
    <tlLogic id="gneJ1" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>

<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements chargingstation inspect_selection chargeintransit ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <chargingStation id="chargingStationA" lane="gneE0_0" startPos="5" endPos="10" name="chargingStation" chargeInTransit="1">
---
>     <chargingStation id="chargingStationA" lane="gneE0_0" startPos="5.00" endPos="10.00" name="true">
---------- Differences in errors ----------
15,22c15
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationA'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationB'
< Debug: Setting new attribute chargeInTransit 'true' into chargingStation 'chargingStationA'
< Debug: Setting new attribute chargeInTransit 'true' into chargingStation 'chargingStationB'
---
> Debug: Setting new attribute name 'true' into chargingStation 'chargingStationA'
25,34c18
< Debug: Setting previous attribute chargeInTransit '1' into chargingStation 'chargingStationB'
< Debug: Setting previous attribute chargeInTransit '0' into chargingStation 'chargingStationA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into chargingStation 'chargingStationB'
< Debug: Setting previous attribute selected '0' into chargingStation 'chargingStationA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Setting previous attribute name 'chargingStation' into chargingStation 'chargingStationA'
38d21
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
40a24
> Debug: Keys Ctrl+Z (Undo) pressed
47,52c31
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements chargingstation inspect_selection efficiency ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <chargingStation id="chargingStationA" lane="gneE0_0" startPos="5" endPos="10" name="chargingStation" efficiency="0.50">
---
>     <chargingStation id="chargingStationA" lane="gneE0_0" startPos="5.00" endPos="10.00" name="chargingStation">
10c10
<     <chargingStation id="chargingStationB" lane="gneE0_0" startPos="15" endPos="20" name="chargingStation" friendlyPos="1" power="13000.00" efficiency="0.50" chargeInTransit="1" chargeDelay="2.00">
---
>     <chargingStation id="chargingStationB" lane="gneE0_0" startPos="15.00" endPos="20.00" name="chargingStation" friendlyPos="1" power="13000.00" efficiency="0.85" chargeInTransit="1" chargeDelay="2.00">
---------- Differences in errors ----------
15,36c15,18
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationA'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationB'
< Debug: Value 'dummyEfficiency' for attribute efficiency of chargingStation isn't valid
< Debug: Value '2' for attribute efficiency of chargingStation isn't valid
< Debug: Setting new attribute efficiency '0.5' into chargingStation 'chargingStationA'
< Debug: Setting new attribute efficiency '0.5' into chargingStation 'chargingStationB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute efficiency '0.85' into chargingStation 'chargingStationB'
< Debug: Setting previous attribute efficiency '0.95' into chargingStation 'chargingStationA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into chargingStation 'chargingStationB'
< Debug: Setting previous attribute selected '0' into chargingStation 'chargingStationA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value 'dummyEfficiency' for attribute endPos of chargingStation isn't valid
> Debug: Value '2' for attribute endPos of chargingStation isn't valid
> Debug: Value '0.5' for attribute endPos of chargingStation isn't valid
> Debug: Value '0.5i' for attribute endPos of chargingStation isn't valid
40d21
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements chargingstation inspect_selection friendlypos ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <chargingStation id="chargingStationA" lane="gneE0_0" startPos="5" endPos="10" name="chargingStation" friendlyPos="1">
---
>     <chargingStation id="chargingStationA" lane="gneE0_0" startPos="5.00" endPos="10.00" name="chargingStation">
---------- Differences in errors ----------
15,34c15,16
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationA'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationB'
< Debug: Setting new attribute friendlyPos 'true' into chargingStation 'chargingStationA'
< Debug: Setting new attribute friendlyPos 'true' into chargingStation 'chargingStationB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute friendlyPos '1' into chargingStation 'chargingStationB'
< Debug: Setting previous attribute friendlyPos '0' into chargingStation 'chargingStationA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into chargingStation 'chargingStationB'
< Debug: Setting previous attribute selected '0' into chargingStation 'chargingStationA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value 'true' for attribute lane of chargingStation isn't valid
> Debug: Value 'truei' for attribute lane of chargingStation isn't valid
38d19
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
40a22,23
> Debug: Keys Ctrl+Z (Undo) pressed
> Debug: Keys Ctrl+Z (Undo) pressed
46,52d28
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements chargingstation inspect_selection name ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5,10c5
<     <chargingStation id="chargingStationA" lane="gneE0_0" startPos="5" endPos="10" name="commonName">
<         <param key="KeyA1" value="valueA1"/>
<         <param key="KeyA2" value="valueA3"/>
<         <param key="KeyA3" value="valueA2"/>
<     </chargingStation>
<     <chargingStation id="chargingStationB" lane="gneE0_0" startPos="15" endPos="20" name="commonName" friendlyPos="1" power="13000.00" efficiency="0.85" chargeInTransit="1" chargeDelay="2.00">
---
>     <chargingStation id="chargingStationB" lane="gneE0_0" startPos="15.00" endPos="20.00" name="chargingStation" friendlyPos="1" power="13000.00" efficiency="0.85" chargeInTransit="1" chargeDelay="2.00">
13a9,13
>     </chargingStation>
>     <chargingStation id="commonName" lane="gneE0_0" startPos="5.00" endPos="10.00" name="chargingStation">
>         <param key="KeyA1" value="valueA1"/>
>         <param key="KeyA2" value="valueA3"/>
>         <param key="KeyA3" value="valueA2"/>
---------- Differences in errors ----------
15,22c15
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationA'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationB'
< Debug: Setting new attribute name 'commonName' into chargingStation 'chargingStationA'
< Debug: Setting new attribute name 'commonName' into chargingStation 'chargingStationB'
---
> Debug: Setting new attribute id 'commonName' into chargingStation 'chargingStationA'
25,34c18
< Debug: Setting previous attribute name 'chargingStation' into chargingStation 'chargingStationB'
< Debug: Setting previous attribute name 'chargingStation' into chargingStation 'chargingStationA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into chargingStation 'chargingStationB'
< Debug: Setting previous attribute selected '0' into chargingStation 'chargingStationA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Setting previous attribute id 'chargingStationA' into chargingStation 'commonName'
38d21
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
40a24
> Debug: Keys Ctrl+Z (Undo) pressed
47,52c31
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements chargingstation inspect_selection parameters ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
6,8c6,8
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>         <param key="keyA1" value="valueA1"/>
>         <param key="keyA2" value="valueA2"/>
>         <param key="keyA3" value="valueA3"/>
11,13c11,13
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>         <param key="keyB1" value="valueB1"/>
>         <param key="keyB2" value="valueB2"/>
>         <param key="keyB3" value="valueB3"/>
---------- Differences in errors ----------
15,34c15,24
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationA'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationB'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into chargingStation 'chargingStationA'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into chargingStation 'chargingStationB'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into chargingStation 'chargingStationA'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into chargingStation 'chargingStationB'
< Debug: Setting new attribute genericParameter '' into chargingStation 'chargingStationA'
< Debug: Setting new attribute genericParameter '' into chargingStation 'chargingStationB'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into chargingStation 'chargingStationA'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into chargingStation 'chargingStationB'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into chargingStation 'chargingStationA'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into chargingStation 'chargingStationB'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into chargingStation 'chargingStationA'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into chargingStation 'chargingStationB'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into chargingStation 'chargingStationA'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into chargingStation 'chargingStationB'
---
> Debug: Value 'dummyGenericParameters' for attribute efficiency of chargingStation isn't valid
> Debug: Value 'key1|key2|key3' for attribute efficiency of chargingStation isn't valid
> Debug: Value 'key1=value1|key2=value2|key3=value3' for attribute efficiency of chargingStation isn't valid
> Debug: Value 'key1=|key2=|key3=' for attribute efficiency of chargingStation isn't valid
> Debug: Value 'key1duplicated=value1|key1duplicated=value2|key3=value3' for attribute efficiency of chargingStation isn't valid
> Debug: Value 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' for attribute efficiency of chargingStation isn't valid
> Debug: Value 'keyInvalid.;%>%$$=value1|key2=value2|key3=value3' for attribute efficiency of chargingStation isn't valid
> Debug: Value 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' for attribute efficiency of chargingStation isn't valid
<truncated after showing first 30 lines>
---------- Differences in log ----------
1,3d0
< Warning: Invalid format of parameter (dummyGenericParameters)
< Warning: Invalid format of parameter (key1)
< Warning: Invalid format of parameter (keyInvalid.;%>%$$=value1)

TEST FAILED on ts-sim-winbuild-ba : additionalElements chargingstation inspect_selection power ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <chargingStation id="chargingStationA" lane="gneE0_0" startPos="5" endPos="10" name="chargingStation" power="11000.00">
---
>     <chargingStation id="chargingStationA" lane="gneE0_0" startPos="5.00" endPos="10.00" name="chargingStation">
10c10
<     <chargingStation id="chargingStationB" lane="gneE0_0" startPos="15" endPos="20" name="chargingStation" friendlyPos="1" power="11000.00" efficiency="0.85" chargeInTransit="1" chargeDelay="2.00">
---
>     <chargingStation id="chargingStationB" lane="gneE0_0" startPos="15.00" endPos="20.00" name="chargingStation" friendlyPos="1" power="13000.00" efficiency="0.85" chargeInTransit="1" chargeDelay="2.00">
---------- Differences in errors ----------
15,36c15,18
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationA'
< Debug: Setting new attribute selected 'true' into chargingStation 'chargingStationB'
< Debug: Value 'dummyPower' for attribute power of chargingStation isn't valid
< Debug: Value '-1000' for attribute power of chargingStation isn't valid
< Debug: Setting new attribute power '11000' into chargingStation 'chargingStationA'
< Debug: Setting new attribute power '11000' into chargingStation 'chargingStationB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute power '13000.00' into chargingStation 'chargingStationB'
< Debug: Setting previous attribute power '22000.00' into chargingStation 'chargingStationA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into chargingStation 'chargingStationB'
< Debug: Setting previous attribute selected '0' into chargingStation 'chargingStationA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value 'dummyPower' for attribute startPos of chargingStation isn't valid
> Debug: Value '-1000' for attribute startPos of chargingStation isn't valid
> Debug: Value '11000' for attribute startPos of chargingStation isn't valid
> Debug: Value '11000i' for attribute startPos of chargingStation isn't valid
40d21
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements chargingstation lock_unlock ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <chargingStation id="chargingStation_gneE0_0_0" lane="gneE0_0" startPos="28.00" endPos="38.00"/>
---
>     <chargingStation id="chargingStation_gneE0_0_0" lane="gneE0_0" startPos="12.00" endPos="22.00"/>
---------- Differences in errors ----------
15,16c15,22
< Debug: Setting new attribute startPos '20.00' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Setting new attribute endPos '30.00' into chargingStation 'chargingStation_gneE0_0_0'
---
> GLDebug: 	Removed object edge:gneE0 from SUMORTree with boundary -10.00,-11.60,60.00,10.00
> GLDebug: 	Inserted edge:gneE0 into SUMORTree with boundary -10.00,-11.60,60.00,10.00
> Debug: Setting new attribute shape '16.97,0.00' into edge 'gneE0'
> GLDebug: 	Removed object edge:gneE0 from SUMORTree with boundary -10.00,-11.60,60.00,10.00
> GLDebug: 	Inserted edge:gneE0 into SUMORTree with boundary -10.00,-11.60,60.00,10.00
> Debug: net has to be saved
> Debug: Current saving Status: net unsaved, additionals unsaved, demand elements saved, data sets saved
> Debug: Value ' m' for attribute endOffset of edge isn't valid
18,27c24,25
< Debug: Setting new attribute blockMovement 'false' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Setting new attribute startPos '28.00' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Setting new attribute endPos '38.00' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute endPos '30.00' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Setting previous attribute startPos '20.00' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute blockMovement '1' into chargingStation 'chargingStation_gneE0_0_0'
---
> GLDebug: 	Removed object edge:gneE0 from SUMORTree with boundary -10.00,-11.60,60.00,10.00
> GLDebug: 	Inserted edge:gneE0 into SUMORTree with boundary -10.00,-11.60,60.00,10.00
33,34c31,33
< Debug: Setting previous attribute endPos '22.00' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Setting previous attribute startPos '12.00' into chargingStation 'chargingStation_gneE0_0_0'
---
<truncated after showing first 30 lines>
---------- Differences in guisettingsoutput ----------
2c2
<     <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
---
>     <viewport zoom="100.00" x="14.96" y="0.00" angle="0.00"/>
---------- Differences in log ----------
0a1
> Warning: Merged shape's point
---------- Differences in net ----------
15,16c15,16
<     <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1">
<         <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
---
>     <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1" shape="0.00,0.00 16.97,0.00 50.00,0.00">
>         <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="-0.00,-1.60 16.97,-1.60 50.00,-1.60"/>

TEST FAILED on ts-sim-winbuild-ba : additionalElements chargingstation move ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <chargingStation id="chargingStation_gneE0_0_0" lane="gneE0_0" startPos="25.00" endPos="35.00"/>
---
>     <chargingStation id="chargingStation_gneE0_0_0" lane="gneE0_0" startPos="12.00" endPos="22.00"/>
---------- Differences in errors ----------
15,30c15,31
< Debug: Setting new attribute startPos '4.00' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Setting new attribute endPos '14.00' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Setting new attribute startPos '12.00' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Setting new attribute endPos '22.00' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Setting new attribute startPos '20.00' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Setting new attribute endPos '30.00' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Setting new attribute startPos '12.00' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Setting new attribute endPos '22.00' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Setting new attribute startPos '0.00' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Setting new attribute endPos '10.00' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Setting new attribute startPos '18.00' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Setting new attribute endPos '28.00' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Setting new attribute startPos '40.00' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Setting new attribute endPos '50.00' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Setting new attribute startPos '25.00' into chargingStation 'chargingStation_gneE0_0_0'
< Debug: Setting new attribute endPos '35.00' into chargingStation 'chargingStation_gneE0_0_0'
---
> GLDebug: 	Removed object edge:gneE0 from SUMORTree with boundary -10.00,-11.60,60.00,10.00
> GLDebug: 	Inserted edge:gneE0 into SUMORTree with boundary -10.00,-11.60,60.00,10.00
> Debug: Setting new attribute shape '-4.18,0.00' into edge 'gneE0'
> GLDebug: 	Removed object edge:gneE0 from SUMORTree with boundary -10.00,-11.60,60.00,10.00
> GLDebug: 	Inserted edge:gneE0 into SUMORTree with boundary -15.78,-11.60,60.00,11.60
> Debug: net has to be saved
> Debug: Current saving Status: net unsaved, additionals unsaved, demand elements saved, data sets saved
> GLDebug: 	Removed object edge:gneE0 from SUMORTree with boundary -15.78,-11.60,60.00,11.60
> GLDebug: 	Inserted edge:gneE0 into SUMORTree with boundary -15.78,-11.60,60.00,11.60
> Debug: Setting new attribute shape '-4.18,0.00 64.54,0.00' into edge 'gneE0'
> GLDebug: 	Removed object edge:gneE0 from SUMORTree with boundary -15.78,-11.60,60.00,11.60
> GLDebug: 	Inserted edge:gneE0 into SUMORTree with boundary -15.78,-10.00,76.14,11.60
<truncated after showing first 30 lines>
---------- Differences in guisettingsoutput ----------
2c2
<     <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
---
>     <viewport zoom="100.00" x="62.00" y="0.00" angle="0.00"/>
---------- Differences in log ----------
0a1,6
> Warning: Found angle of 180.00 degrees at edge 'gneE0', segment 0.
> Warning: Found sharp turn with radius 0.00 at the start of edge 'gneE0'.
> Warning: Found angle of 180.00 degrees at edge 'gneE0', segment 1.
> Warning: Found sharp turn with radius 0.00 at the end of edge 'gneE0'.
> Warning: Speed of straight connection 'gneE1_0->gneE0_0' reduced by 11.16 due to turning radius of 1.36 (length=1.60, angle=180.00).
> Warning: Speed of straight connection 'gneE0_0->gneE1_0' reduced by 11.16 due to turning radius of 1.36 (length=1.60, angle=180.00).
---------- Differences in net ----------
6c6
<     <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>
---
>     <location netOffset="25.00,0.00" convBoundary="-4.18,0.00,64.54,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>
9c9
<         <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
---
>         <lane id=":gneJ0_0_0" index="0" speed="2.73" length="1.60" shape="0.00,1.60 0.00,0.00"/>
12c12
<         <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
---
>         <lane id=":gneJ1_0_0" index="0" speed="2.73" length="1.60" shape="50.00,0.00 50.00,1.60"/>
15,16c15,16
<     <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1">
<         <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
---
>     <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1" shape="0.00,0.00 -4.18,0.00 64.54,0.00 50.00,0.00">
>         <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,0.00 50.00,0.00"/>
31c31
<     <junction id="gneJ0" type="traffic_light" x="0.00" y="0.00" incLanes="gneE1_0" intLanes=":gneJ0_0_0" shape="0.00,0.00 0.00,3.20 0.00,0.00">
---
>     <junction id="gneJ0" type="traffic_light" x="0.00" y="0.00" incLanes="gneE1_0" intLanes=":gneJ0_0_0" shape="0.00,3.20 0.00,0.00 -0.84,3.03">
34c34
<     <junction id="gneJ1" type="traffic_light" x="50.00" y="0.00" incLanes="gneE0_0" intLanes=":gneJ1_0_0" shape="50.00,0.00 50.00,-3.20 50.00,0.00">
---
>     <junction id="gneJ1" type="traffic_light" x="50.00" y="0.00" incLanes="gneE0_0" intLanes=":gneJ1_0_0" shape="50.31,3.18 50.00,-0.01 50.00,3.20">
38,39c38,39
<     <connection from="gneE0" to="gneE1" fromLane="0" toLane="0" via=":gneJ1_0_0" tl="gneJ1" linkIndex="0" dir="t" state="O"/>
<     <connection from="gneE1" to="gneE0" fromLane="0" toLane="0" via=":gneJ0_0_0" tl="gneJ0" linkIndex="0" dir="t" state="O"/>
---
<truncated after showing first 30 lines>

2 TESTS FAILED on ts-sim-winbuild-ba :

---------- Differences in additionals ----------
5,8c5,8
<     <containerStop id="containerStopA" lane="gneE0_0" startPos="11.90" endPos="12.00"/>
<     <containerStop id="containerStopB" lane="gneE0_0" startPos="38.00" endPos="50.00"/>
<     <containerStop id="containerStopC" lane="gneE1_0" startPos="12.00" endPos="48.00"/>
<     <containerStop id="containerStopD" lane="gneE1_0" startPos="37.90" endPos="38.00"/>
---
>     <containerStop id="containerStopA" lane="gneE0_0" startPos="11.90" endPos="12.00" friendlyPos="1"/>
>     <containerStop id="containerStopB" lane="gneE0_0" startPos="38.00" endPos="50.00" friendlyPos="1"/>
>     <containerStop id="containerStopC" lane="gneE1_0" startPos="12.00" endPos="48.00" friendlyPos="1"/>
>     <containerStop id="containerStopD" lane="gneE1_0" startPos="37.90" endPos="38.00" friendlyPos="1"/>
---------- Differences in errors ----------
16,36c16,17
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopA'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopB'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopC'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopD'
< Debug: Setting new attribute friendlyPos 'false' into containerStop 'containerStopA'
< Debug: Setting new attribute friendlyPos 'false' into containerStop 'containerStopB'
< Debug: Setting new attribute friendlyPos 'false' into containerStop 'containerStopC'
< Debug: Setting new attribute friendlyPos 'false' into containerStop 'containerStopD'
< Debug: Setting new attribute selected 'false' into junction 'gneJ0'
< Debug: Setting new attribute selected 'false' into edge 'gneE1'
< Debug: Setting new attribute selected 'false' into junction 'gneJ1'
< Debug: Setting new attribute selected 'false' into edge 'gneE0'
< Debug: Setting new attribute selected 'false' into containerStop 'containerStopA'
< Debug: Setting new attribute selected 'false' into containerStop 'containerStopB'
< Debug: Setting new attribute selected 'false' into containerStop 'containerStopC'
< Debug: Setting new attribute selected 'false' into containerStop 'containerStopD'
< Debug: Additionals saved after dialog
---
> Debug: Value ' s' for attribute lane of containerStop isn't valid
> Debug: Additionals saved
additionalElements containerstop fix fix_positions ( Last six runs Aug2020 Jul2020 )
additionalElements containerstop fix save_invalids ( Last six runs Aug2020 Jul2020 )

TEST FAILED on ts-sim-winbuild-ba : additionalElements containerstop fix friendlypos ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
6,8c6,8
<     <containerStop id="containerStopB" lane="gneE0_0" startPos="38.00" endPos="50.00"/>
<     <containerStop id="containerStopC" lane="gneE1_0" startPos="12.00" endPos="48.00"/>
<     <containerStop id="containerStopD" lane="gneE1_0" startPos="37.90" endPos="38.00"/>
---
>     <containerStop id="containerStopB" lane="gneE0_0" startPos="38.00" endPos="50.00" friendlyPos="1"/>
>     <containerStop id="containerStopC" lane="gneE1_0" startPos="12.00" endPos="48.00" friendlyPos="1"/>
>     <containerStop id="containerStopD" lane="gneE1_0" startPos="37.90" endPos="38.00" friendlyPos="1"/>
---------- Differences in errors ----------
16,37c16,17
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopA'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopB'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopC'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopD'
< Debug: Setting new attribute friendlyPos 'false' into containerStop 'containerStopA'
< Debug: Setting new attribute friendlyPos 'false' into containerStop 'containerStopB'
< Debug: Setting new attribute friendlyPos 'false' into containerStop 'containerStopC'
< Debug: Setting new attribute friendlyPos 'false' into containerStop 'containerStopD'
< Debug: Setting new attribute selected 'false' into junction 'gneJ0'
< Debug: Setting new attribute selected 'false' into edge 'gneE1'
< Debug: Setting new attribute selected 'false' into junction 'gneJ1'
< Debug: Setting new attribute selected 'false' into edge 'gneE0'
< Debug: Setting new attribute selected 'false' into containerStop 'containerStopA'
< Debug: Setting new attribute selected 'false' into containerStop 'containerStopB'
< Debug: Setting new attribute selected 'false' into containerStop 'containerStopC'
< Debug: Setting new attribute selected 'false' into containerStop 'containerStopD'
< Debug: Setting new attribute friendlyPos 'true' into containerStop 'containerStopA'
< Debug: Additionals saved after dialog
---
> Debug: Value ' s' for attribute lane of containerStop isn't valid
> Debug: Additionals saved

TEST FAILED on ts-sim-winbuild-ba : additionalElements containerstop fix select_invalids ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5,7c5,8
<     <containerStop id="containerStopB" lane="gneE0_0" startPos="38.00" endPos="50.00"/>
<     <containerStop id="containerStopC" lane="gneE1_0" startPos="12.00" endPos="48.00"/>
<     <containerStop id="containerStopD" lane="gneE1_0" startPos="37.90" endPos="38.00"/>
---
>     <containerStop id="containerStopA" lane="gneE0_0" startPos="11.90" endPos="12.00" friendlyPos="1"/>
>     <containerStop id="containerStopB" lane="gneE0_0" startPos="38.00" endPos="50.00" friendlyPos="1"/>
>     <containerStop id="containerStopC" lane="gneE1_0" startPos="12.00" endPos="48.00" friendlyPos="1"/>
>     <containerStop id="containerStopD" lane="gneE1_0" startPos="37.90" endPos="38.00" friendlyPos="1"/>
---------- Differences in errors ----------
16,40c16
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopA'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopB'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopC'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopD'
< Debug: Setting new attribute friendlyPos 'false' into containerStop 'containerStopA'
< Debug: Setting new attribute friendlyPos 'false' into containerStop 'containerStopB'
< Debug: Setting new attribute friendlyPos 'false' into containerStop 'containerStopC'
< Debug: Setting new attribute friendlyPos 'false' into containerStop 'containerStopD'
< Debug: Setting new attribute selected 'false' into junction 'gneJ0'
< Debug: Setting new attribute selected 'false' into edge 'gneE1'
< Debug: Setting new attribute selected 'false' into junction 'gneJ1'
< Debug: Setting new attribute selected 'false' into edge 'gneE0'
< Debug: Setting new attribute selected 'false' into containerStop 'containerStopA'
< Debug: Setting new attribute selected 'false' into containerStop 'containerStopB'
< Debug: Setting new attribute selected 'false' into containerStop 'containerStopC'
< Debug: Setting new attribute selected 'false' into containerStop 'containerStopD'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopA'
< Debug: Additionals saving aborted
< Debug: Key DEL (delete) pressed
< Debug: Removing containerStop 'containerStopA' in GNEChange_Additional
< Debug: Removed inspected element from Inspected ACs. 3 ACs remains.
---
> Debug: Value ' s' for attribute lane of containerStop isn't valid

TEST FAILED on ts-sim-winbuild-ba : additionalElements containerstop inspect_selection blockmove ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <containerStop id="containerStopA" lane="gneE0_0" startPos="5" endPos="10" name="containerStop" friendlyPos="1" lines="line1 line2">
---
>     <containerStop id="containerStopA" lane="gneE0_0" startPos="5.00" endPos="10.00" name="containerStop" friendlyPos="1" lines="i">
---------- Differences in errors ----------
15,22c15
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopA'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopB'
< Debug: Setting new attribute blockMovement 'true' into containerStop 'containerStopA'
< Debug: Setting new attribute blockMovement 'true' into containerStop 'containerStopB'
---
> Debug: Setting new attribute lines ' i' into containerStop 'containerStopA'
25,34c18
< Debug: Setting previous attribute blockMovement '0' into containerStop 'containerStopB'
< Debug: Setting previous attribute blockMovement '0' into containerStop 'containerStopA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into containerStop 'containerStopB'
< Debug: Setting previous attribute selected '0' into containerStop 'containerStopA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Setting previous attribute lines 'line1 line2' into containerStop 'containerStopA'
38d21
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
40a24
> Debug: Keys Ctrl+Z (Undo) pressed
47,52c31
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements containerstop inspect_selection friendlypos ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
10c10
<     <containerStop id="containerStopB" lane="gneE0_0" startPos="15" endPos="20" name="containerStop" friendlyPos="1" lines="line3 line4">
---
>     <containerStop id="containerStopB" lane="gneE0_0" startPos="15.00" endPos="20.00" name="containerStop" lines="line3 line4">
---------- Differences in errors ----------
15,34c15,16
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopA'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopB'
< Debug: Setting new attribute friendlyPos 'true' into containerStop 'containerStopA'
< Debug: Setting new attribute friendlyPos 'true' into containerStop 'containerStopB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute friendlyPos '0' into containerStop 'containerStopB'
< Debug: Setting previous attribute friendlyPos '1' into containerStop 'containerStopA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into containerStop 'containerStopB'
< Debug: Setting previous attribute selected '0' into containerStop 'containerStopA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value 'true' for attribute lane of containerStop isn't valid
> Debug: Value 'truei' for attribute lane of containerStop isn't valid
38d19
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
40a22,23
> Debug: Keys Ctrl+Z (Undo) pressed
> Debug: Keys Ctrl+Z (Undo) pressed
46,52d28
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements containerstop inspect_selection lines ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <containerStop id="containerStopA" lane="gneE0_0" startPos="5" endPos="10" name="containerStop" friendlyPos="1" lines="commonLine1 commonLine2">
---
>     <containerStop id="containerStopA" lane="gneE0_0" startPos="5.00" endPos="10.00" name="containerStop" friendlyPos="1" lines="line1 line2">
10c10
<     <containerStop id="containerStopB" lane="gneE0_0" startPos="15" endPos="20" name="containerStop" lines="commonLine1 commonLine2">
---
>     <containerStop id="containerStopB" lane="gneE0_0" startPos="15.00" endPos="20.00" name="containerStop" lines="line3 line4">
---------- Differences in errors ----------
15,34c15,16
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopA'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopB'
< Debug: Setting new attribute lines 'commonLine1 commonLine2' into containerStop 'containerStopA'
< Debug: Setting new attribute lines 'commonLine1 commonLine2' into containerStop 'containerStopB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute lines 'line3 line4' into containerStop 'containerStopB'
< Debug: Setting previous attribute lines 'line1 line2' into containerStop 'containerStopA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into containerStop 'containerStopB'
< Debug: Setting previous attribute selected '0' into containerStop 'containerStopA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value 'commonLine1 commonLine2' for attribute startPos of containerStop isn't valid
> Debug: Value 'commonLine1 commonLine2i' for attribute startPos of containerStop isn't valid
38d19
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
40a22,23
> Debug: Keys Ctrl+Z (Undo) pressed
> Debug: Keys Ctrl+Z (Undo) pressed
46,52d28
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements containerstop inspect_selection name ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <containerStop id="containerStopA" lane="gneE0_0" startPos="5" endPos="10" name="common containerStop Name" friendlyPos="1" lines="line1 line2">
---
>     <containerStop id="containerStopA" lane="gneE0_0" startPos="5.00" endPos="10.00" name="containerStop" friendlyPos="1" lines="line1 line2">
10c10
<     <containerStop id="containerStopB" lane="gneE0_0" startPos="15" endPos="20" name="common containerStop Name" lines="line3 line4">
---
>     <containerStop id="containerStopB" lane="gneE0_0" startPos="15.00" endPos="20.00" name="containerStop" lines="line3 line4">
---------- Differences in errors ----------
15,34c15,16
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopA'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopB'
< Debug: Setting new attribute name 'common containerStop Name' into containerStop 'containerStopA'
< Debug: Setting new attribute name 'common containerStop Name' into containerStop 'containerStopB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute name 'containerStop' into containerStop 'containerStopB'
< Debug: Setting previous attribute name 'containerStop' into containerStop 'containerStopA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into containerStop 'containerStopB'
< Debug: Setting previous attribute selected '0' into containerStop 'containerStopA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value 'common containerStop Name' for attribute id of containerStop isn't valid
> Debug: Value 'common containerStop Namei' for attribute id of containerStop isn't valid
38d19
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
40a22,23
> Debug: Keys Ctrl+Z (Undo) pressed
> Debug: Keys Ctrl+Z (Undo) pressed
46,52d28
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements containerstop inspect_selection parameters ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5,8c5,8
<     <containerStop id="containerStopA" lane="gneE0_0" startPos="5" endPos="10" name="containerStop" friendlyPos="1" lines="line1 line2">
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>     <containerStop id="containerStopA" lane="gneE0_0" startPos="5.00" endPos="10.00" friendlyPos="1" lines="line1 line2">
>         <param key="KeyA1" value="valueA1"/>
>         <param key="KeyA2" value="valueA3"/>
>         <param key="KeyA3" value="valueA2"/>
11,13c11,13
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>         <param key="KeyB1" value="valueB1"/>
>         <param key="KeyB2" value="valueB3"/>
>         <param key="KeyB3" value="valueB2"/>
---------- Differences in errors ----------
15,34c15,25
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopA'
< Debug: Setting new attribute selected 'true' into containerStop 'containerStopB'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into containerStop 'containerStopA'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into containerStop 'containerStopB'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into containerStop 'containerStopA'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into containerStop 'containerStopB'
< Debug: Setting new attribute genericParameter '' into containerStop 'containerStopA'
< Debug: Setting new attribute genericParameter '' into containerStop 'containerStopB'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into containerStop 'containerStopA'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into containerStop 'containerStopB'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into containerStop 'containerStopA'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into containerStop 'containerStopB'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into containerStop 'containerStopA'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into containerStop 'containerStopB'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into containerStop 'containerStopA'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into containerStop 'containerStopB'
---
> Debug: Setting new attribute name 'dummyGenericParameters' into containerStop 'containerStopA'
> Debug: Value 'key1|key2|key3' for attribute name of containerStop isn't valid
> Debug: Value 'key1=value1|key2=value2|key3=value3' for attribute name of containerStop isn't valid
> Debug: Value 'key1=|key2=|key3=' for attribute name of containerStop isn't valid
> Debug: Setting new attribute name '' into containerStop 'containerStopA'
> Debug: Value 'key1duplicated=value1|key1duplicated=value2|key3=value3' for attribute name of containerStop isn't valid
> Debug: Value 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' for attribute name of containerStop isn't valid
> Debug: Value 'keyInvalid.;%>%$$=value1|key2=value2|key3=value3' for attribute name of containerStop isn't valid
<truncated after showing first 30 lines>
---------- Differences in log ----------
1,3d0
< Warning: Invalid format of parameter (dummyGenericParameters)
< Warning: Invalid format of parameter (key1)
< Warning: Invalid format of parameter (keyInvalid.;%>%$$=value1)

TEST FAILED on ts-sim-winbuild-ba : additionalElements containerstop lock_unlock ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <containerStop id="containerStop_gneE0_0_0" lane="gneE0_0" startPos="28.00" endPos="38.00"/>
---
>     <containerStop id="containerStop_gneE0_0_0" lane="gneE0_0" startPos="12.00" endPos="22.00"/>
---------- Differences in errors ----------
10,11d9
< Debug: Setting new attribute startPos '20.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting new attribute endPos '30.00' into containerStop 'containerStop_gneE0_0_0'
13,15d10
< Debug: Setting new attribute blockMovement 'false' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting new attribute startPos '28.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting new attribute endPos '38.00' into containerStop 'containerStop_gneE0_0_0'
18,19c13
< Debug: Setting previous attribute endPos '30.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting previous attribute startPos '20.00' into containerStop 'containerStop_gneE0_0_0'
---
> Debug: Setting previous attribute blockMovement '0' into containerStop 'containerStop_gneE0_0_0'
22c16
< Debug: Setting previous attribute blockMovement '1' into containerStop 'containerStop_gneE0_0_0'
---
> Debug: Removing containerStop 'containerStop_gneE0_0_0' in GNEChange_Additional
24,25d17
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute blockMovement '0' into containerStop 'containerStop_gneE0_0_0'
27,29d18
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute endPos '22.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting previous attribute startPos '12.00' into containerStop 'containerStop_gneE0_0_0'
31,32d19
< Debug: Calling GNEUndoList::undo()
< Debug: Removing containerStop 'containerStop_gneE0_0_0' in GNEChange_Additional
38,41d24
< Debug: Setting new attribute startPos '20.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting new attribute endPos '30.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Keys Ctrl+Y (Redo) pressed
<truncated after showing first 30 lines>
---------- Differences in guisettingsoutput ----------
2c2
<     <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
---
>     <viewport zoom="100.00" x="-6.71" y="0.00" angle="0.00"/>

TEST FAILED on ts-sim-winbuild-ba : additionalElements containerstop move ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <containerStop id="containerStop_gneE0_0_0" lane="gneE0_0" startPos="25.00" endPos="35.00"/>
---
>     <containerStop id="containerStop_gneE0_0_0" lane="gneE0_0" startPos="12.00" endPos="22.00"/>
---------- Differences in errors ----------
10,25d9
< Debug: Setting new attribute startPos '4.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting new attribute endPos '14.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting new attribute startPos '12.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting new attribute endPos '22.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting new attribute startPos '20.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting new attribute endPos '30.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting new attribute startPos '12.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting new attribute endPos '22.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting new attribute startPos '0.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting new attribute endPos '10.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting new attribute startPos '18.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting new attribute endPos '28.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting new attribute startPos '40.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting new attribute endPos '50.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting new attribute startPos '25.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting new attribute endPos '35.00' into containerStop 'containerStop_gneE0_0_0'
28,29c12
< Debug: Setting previous attribute endPos '50.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting previous attribute startPos '40.00' into containerStop 'containerStop_gneE0_0_0'
---
> Debug: Removing containerStop 'containerStop_gneE0_0_0' in GNEChange_Additional
31,33d13
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute endPos '28.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting previous attribute startPos '18.00' into containerStop 'containerStop_gneE0_0_0'
35,37d14
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute endPos '10.00' into containerStop 'containerStop_gneE0_0_0'
< Debug: Setting previous attribute startPos '0.00' into containerStop 'containerStop_gneE0_0_0'
<truncated after showing first 30 lines>
---------- Differences in guisettingsoutput ----------
2c2
<     <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
---
>     <viewport zoom="100.00" x="30.29" y="0.00" angle="0.00"/>

TEST FAILED on ts-sim-winbuild-ba : additionalElements detentry inspect_selection blockmove ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
19,103c19
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e3Detector 'E3_0'
< Debug: Setting new attribute selected 'true' into e3Detector 'E3_1'
< Debug: Setting new attribute selected 'true' into detEntry 'E3_0detEntry0'
< Debug: Setting new attribute selected 'true' into detEntry 'E3_1detEntry0'
< Debug: Setting new attribute selected 'true' into detExit 'E3_0detExit1'
< Debug: Setting new attribute selected 'true' into detExit 'E3_1detExit1'
< Debug: Setting new attribute blockMovement 'true' into detEntry 'E3_0detEntry0'
< Debug: Setting new attribute blockMovement 'true' into detEntry 'E3_1detEntry0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute blockMovement '0' into detEntry 'E3_1detEntry0'
< Debug: Setting previous attribute blockMovement '0' into detEntry 'E3_0detEntry0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into detExit 'E3_1detExit1'
< Debug: Setting previous attribute selected '0' into detExit 'E3_0detExit1'
< Debug: Setting previous attribute selected '0' into detEntry 'E3_1detEntry0'
< Debug: Setting previous attribute selected '0' into detEntry 'E3_0detEntry0'
< Debug: Setting previous attribute selected '0' into e3Detector 'E3_1'
< Debug: Setting previous attribute selected '0' into e3Detector 'E3_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
< Debug: Keys Ctrl+Z (Undo) pressed
<truncated after showing first 30 lines>
---------- Differences in output ----------
7c7
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <e3Detector id="E3_0" pos="7.50,3.00" freq="100.00" file="fileA.txt">
        <detEntry lane="gneE0_0" pos="10.00">
            <param key="KeyA1" value="valueA1"/>
            <param key="KeyA2" value="valueA3"/>
            <param key="KeyA3" value="valueA2"/>
        </detEntry>
        <detExit lane="gneE0_0" pos="15.00"/>
    </e3Detector>
    <e3Detector id="E3_1" pos="17.50,3.00" freq="100.00" file="fileB.txt">
        <detEntry lane="gneE0_0" pos="20.00" friendlyPos="1">
            <param key="KeyB1" value="valueB1"/>
            <param key="KeyB2" value="valueB3"/>
            <param key="KeyB3" value="valueB2"/>
        </detEntry>
        <detExit lane="gneE0_0" pos="25.00"/>
    </e3Detector>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>

    <edge id=":gneJ0_0" function="internal">
        <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
    </edge>
    <edge id=":gneJ1_0" function="internal">
        <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
    </edge>

    <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1">
        <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
    </edge>
    <edge id="gneE1" from="gneJ1" to="gneJ0" priority="1">
        <lane id="gneE1_0" index="0" speed="13.89" length="50.00" shape="50.00,1.60 0.00,1.60"/>
    </edge>

    <tlLogic id="gneJ0" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>
    <tlLogic id="gneJ1" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>

<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements detentry inspect_selection friendlypos ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
6c6
<         <detEntry lane="gneE0_0" pos="10.00" friendlyPos="1">
---
>         <detEntry lane="gneE0_0" pos="10.00">
---------- Differences in errors ----------
19,46c19,20
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e3Detector 'E3_0'
< Debug: Setting new attribute selected 'true' into e3Detector 'E3_1'
< Debug: Setting new attribute selected 'true' into detEntry 'E3_0detEntry0'
< Debug: Setting new attribute selected 'true' into detEntry 'E3_1detEntry0'
< Debug: Setting new attribute selected 'true' into detExit 'E3_0detExit1'
< Debug: Setting new attribute selected 'true' into detExit 'E3_1detExit1'
< Debug: Setting new attribute friendlyPos 'true' into detEntry 'E3_0detEntry0'
< Debug: Setting new attribute friendlyPos 'true' into detEntry 'E3_1detEntry0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute friendlyPos '1' into detEntry 'E3_1detEntry0'
< Debug: Setting previous attribute friendlyPos '0' into detEntry 'E3_0detEntry0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into detExit 'E3_1detExit1'
< Debug: Setting previous attribute selected '0' into detExit 'E3_0detExit1'
< Debug: Setting previous attribute selected '0' into detEntry 'E3_1detEntry0'
< Debug: Setting previous attribute selected '0' into detEntry 'E3_0detEntry0'
< Debug: Setting previous attribute selected '0' into e3Detector 'E3_1'
< Debug: Setting previous attribute selected '0' into e3Detector 'E3_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements detentry inspect_selection parameters ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
19,145c19
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e3Detector 'E3_0'
< Debug: Setting new attribute selected 'true' into e3Detector 'E3_1'
< Debug: Setting new attribute selected 'true' into detEntry 'E3_0detEntry0'
< Debug: Setting new attribute selected 'true' into detEntry 'E3_1detEntry0'
< Debug: Setting new attribute selected 'true' into detExit 'E3_0detExit1'
< Debug: Setting new attribute selected 'true' into detExit 'E3_1detExit1'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into detEntry 'E3_0detEntry0'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into detEntry 'E3_1detEntry0'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into detEntry 'E3_0detEntry0'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into detEntry 'E3_1detEntry0'
< Debug: Setting new attribute genericParameter '' into detEntry 'E3_0detEntry0'
< Debug: Setting new attribute genericParameter '' into detEntry 'E3_1detEntry0'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into detEntry 'E3_0detEntry0'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into detEntry 'E3_1detEntry0'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into detEntry 'E3_0detEntry0'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into detEntry 'E3_1detEntry0'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into detEntry 'E3_0detEntry0'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into detEntry 'E3_1detEntry0'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into detEntry 'E3_0detEntry0'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into detEntry 'E3_1detEntry0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into detEntry 'E3_1detEntry0'
< Debug: Setting previous attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into detEntry 'E3_0detEntry0'
< Debug: Keys Ctrl+Z (Undo) pressed
<truncated after showing first 30 lines>
---------- Differences in log ----------
1,3d0
< Warning: Invalid format of parameter (dummyGenericParameters)
< Warning: Invalid format of parameter (key1)
< Warning: Invalid format of parameter (keyInvalid.;%>%$$=value1)
---------- Differences in output ----------
17c17
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <e3Detector id="E3_0" pos="7.50,3.00" freq="100.00" file="fileA.txt">
        <detEntry lane="gneE0_0" pos="10.00">
            <param key="keyFinal1" value="value1"/>
            <param key="keyFinal2" value="value2"/>
            <param key="keyFinal3" value="value3"/>
        </detEntry>
        <detExit lane="gneE0_0" pos="15.00"/>
    </e3Detector>
    <e3Detector id="E3_1" pos="17.50,3.00" freq="100.00" file="fileB.txt">
        <detEntry lane="gneE0_0" pos="20.00" friendlyPos="1">
            <param key="keyFinal1" value="value1"/>
            <param key="keyFinal2" value="value2"/>
            <param key="keyFinal3" value="value3"/>
        </detEntry>
        <detExit lane="gneE0_0" pos="25.00"/>
    </e3Detector>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>

    <edge id=":gneJ0_0" function="internal">
        <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
    </edge>
    <edge id=":gneJ1_0" function="internal">
        <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
    </edge>

    <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1">
        <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
    </edge>
    <edge id="gneE1" from="gneJ1" to="gneJ0" priority="1">
        <lane id="gneE1_0" index="0" speed="13.89" length="50.00" shape="50.00,1.60 0.00,1.60"/>
    </edge>

    <tlLogic id="gneJ0" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>
    <tlLogic id="gneJ1" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>

<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements detentry inspect_selection parent ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
4a5,12
>     <e3Detector id="E3_0" pos="7.50,3.00" freq="100.00" file="fileA.txt">
>         <detEntry lane="gneE0_0" pos="10.00">
>             <param key="KeyA1" value="valueA1"/>
>             <param key="KeyA2" value="valueA3"/>
>             <param key="KeyA3" value="valueA2"/>
>         </detEntry>
>         <detExit lane="gneE0_0" pos="15.00"/>
>     </e3Detector>
10,14d17
<         </detEntry>
<         <detEntry lane="gneE0_0" pos="10.00">
<             <param key="KeyA1" value="valueA1"/>
<             <param key="KeyA2" value="valueA3"/>
<             <param key="KeyA3" value="valueA2"/>
---------- Differences in errors ----------
19,44d18
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e3Detector 'E3_0'
< Debug: Setting new attribute selected 'true' into e3Detector 'E3_1'
< Debug: Setting new attribute selected 'true' into detEntry 'E3_0detEntry0'
< Debug: Setting new attribute selected 'true' into detEntry 'E3_1detEntry0'
< Debug: Setting new attribute selected 'true' into detExit 'E3_0detExit1'
< Debug: Setting new attribute selected 'true' into detExit 'E3_1detExit1'
< Debug: Setting new attribute parentItem 'E3_1' into detEntry 'E3_0detEntry0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute parentItem 'E3_0' into detEntry 'E3_0detEntry0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into detExit 'E3_1detExit1'
< Debug: Setting previous attribute selected '0' into detExit 'E3_0detExit1'
< Debug: Setting previous attribute selected '0' into detEntry 'E3_1detEntry0'
< Debug: Setting previous attribute selected '0' into detEntry 'E3_0detEntry0'
< Debug: Setting previous attribute selected '0' into e3Detector 'E3_1'
< Debug: Setting previous attribute selected '0' into e3Detector 'E3_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
49d22
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
54a28,29
<truncated after showing first 30 lines>
---------- Differences in log ----------
1,2c1,3
< Warning: An e3Detector need at least one detEntry detector
< Warning: e3Detector with ID='E3_0' cannot be written
---
> Warning: Invalid format of parameter (invalidE3)
> Warning: Invalid format of parameter (E3_1)
> Warning: Invalid format of parameter (E3_1i)

TEST FAILED on ts-sim-winbuild-ba : additionalElements detentry lock_unlock ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
6c6
<         <detEntry lane="gneE1_0" pos="23.00"/>
---
>         <detEntry lane="gneE1_0" pos="33.00"/>
---------- Differences in errors ----------
15,18c15,18
< Debug: Setting new attribute pos '27.00' into detEntry 'e3Detector_0detEntry0'
< Debug: Setting new attribute blockMovement 'true' into detEntry 'e3Detector_0detEntry0'
< Debug: Setting new attribute blockMovement 'false' into detEntry 'e3Detector_0detEntry0'
< Debug: Setting new attribute pos '23.00' into detEntry 'e3Detector_0detEntry0'
---
> Error: Shape of a(n) user-supplied shape is broken: the position is neither x,y nor x,y,z.
> Debug: Value ' m' for attribute shape of edge isn't valid
> Error: Shape of a(n) user-supplied shape is broken: the position is neither x,y nor x,y,z.
> Debug: Value ' m' for attribute shape of edge isn't valid
21c21
< Debug: Setting previous attribute pos '27.00' into detEntry 'e3Detector_0detEntry0'
---
> Debug: Removing detExit 'e3Detector_0detExit1' in GNEChange_Additional
24c24
< Debug: Setting previous attribute blockMovement '1' into detEntry 'e3Detector_0detEntry0'
---
> Debug: Removing detEntry 'e3Detector_0detEntry0' in GNEChange_Additional
27c27
< Debug: Setting previous attribute blockMovement '0' into detEntry 'e3Detector_0detEntry0'
---
> Debug: Removing e3Detector 'e3Detector_0' in GNEChange_Additional
29,30d28
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '33.00' into detEntry 'e3Detector_0detEntry0'
32,33d29
< Debug: Calling GNEUndoList::undo()
< Debug: Removing detExit 'e3Detector_0detExit1' in GNEChange_Additional
35,36d30
< Debug: Calling GNEUndoList::undo()
<truncated after showing first 30 lines>
---------- Differences in guisettingsoutput ----------
2c2
<     <viewport zoom="296.00" x="25.00" y="0.00" angle="0.00"/>
---
>     <viewport zoom="296.00" x="14.14" y="0.00" angle="0.00"/>
---------- Differences in log ----------
0a1,2
> Error: Shape of a(n) user-supplied shape is broken: the position is neither x,y nor x,y,z.
> Error: Shape of a(n) user-supplied shape is broken: the position is neither x,y nor x,y,z.

TEST FAILED on ts-sim-winbuild-ba : additionalElements detentry move ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
6c6
<         <detEntry lane="gneE1_0" pos="23.00"/>
---
>         <detEntry lane="gneE1_0" pos="33.00"/>
---------- Differences in errors ----------
16,27d15
< Debug: Setting new attribute pos '37.00' into detEntry 'e3Detector_0detEntry0'
< Debug: Setting new attribute pos '32.00' into detEntry 'e3Detector_0detEntry0'
< Debug: Setting new attribute pos '23.00' into detEntry 'e3Detector_0detEntry0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '32.00' into detEntry 'e3Detector_0detEntry0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '37.00' into detEntry 'e3Detector_0detEntry0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '33.00' into detEntry 'e3Detector_0detEntry0'
38a27,29
> Debug: Keys Ctrl+Z (Undo) pressed
> Debug: Keys Ctrl+Z (Undo) pressed
> Debug: Keys Ctrl+Z (Undo) pressed
49,50d39
< Debug: Calling GNEUndoList::redo()
< Debug: Setting new attribute pos '37.00' into detEntry 'e3Detector_0detEntry0'
52,53d40
< Debug: Calling GNEUndoList::redo()
< Debug: Setting new attribute pos '32.00' into detEntry 'e3Detector_0detEntry0'
55,56d41
< Debug: Calling GNEUndoList::redo()
< Debug: Setting new attribute pos '23.00' into detEntry 'e3Detector_0detEntry0'
---------- Differences in guisettingsoutput ----------
2c2
<     <viewport zoom="105.71" x="25.00" y="0.00" angle="0.00"/>
---
>     <viewport zoom="105.71" x="11.50" y="0.00" angle="0.00"/>

TEST FAILED on ts-sim-winbuild-ba : additionalElements detexit inspect_selection blockmove ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
19,103c19
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e3Detector 'E3_0'
< Debug: Setting new attribute selected 'true' into e3Detector 'E3_1'
< Debug: Setting new attribute selected 'true' into detEntry 'E3_0detEntry1'
< Debug: Setting new attribute selected 'true' into detEntry 'E3_1detEntry1'
< Debug: Setting new attribute selected 'true' into detExit 'E3_0detExit0'
< Debug: Setting new attribute selected 'true' into detExit 'E3_1detExit0'
< Debug: Setting new attribute blockMovement 'true' into detExit 'E3_0detExit0'
< Debug: Setting new attribute blockMovement 'true' into detExit 'E3_1detExit0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute blockMovement '0' into detExit 'E3_1detExit0'
< Debug: Setting previous attribute blockMovement '0' into detExit 'E3_0detExit0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into detExit 'E3_1detExit0'
< Debug: Setting previous attribute selected '0' into detExit 'E3_0detExit0'
< Debug: Setting previous attribute selected '0' into detEntry 'E3_1detEntry1'
< Debug: Setting previous attribute selected '0' into detEntry 'E3_0detEntry1'
< Debug: Setting previous attribute selected '0' into e3Detector 'E3_1'
< Debug: Setting previous attribute selected '0' into e3Detector 'E3_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
< Debug: Keys Ctrl+Z (Undo) pressed
<truncated after showing first 30 lines>
---------- Differences in output ----------
7c7
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <e3Detector id="E3_0" pos="7.50,3.00" freq="100.00" file="fileA.txt">
        <detEntry lane="gneE0_0" pos="15.00"/>
        <detExit lane="gneE0_0" pos="10.00">
            <param key="KeyA1" value="valueA1"/>
            <param key="KeyA2" value="valueA3"/>
            <param key="KeyA3" value="valueA2"/>
        </detExit>
    </e3Detector>
    <e3Detector id="E3_1" pos="17.50,3.00" freq="100.00" file="fileB.txt">
        <detEntry lane="gneE0_0" pos="25.00"/>
        <detExit lane="gneE0_0" pos="20.00" friendlyPos="1">
            <param key="KeyB1" value="valueB1"/>
            <param key="KeyB2" value="valueB3"/>
            <param key="KeyB3" value="valueB2"/>
        </detExit>
    </e3Detector>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>

    <edge id=":gneJ0_0" function="internal">
        <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
    </edge>
    <edge id=":gneJ1_0" function="internal">
        <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
    </edge>

    <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1">
        <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
    </edge>
    <edge id="gneE1" from="gneJ1" to="gneJ0" priority="1">
        <lane id="gneE1_0" index="0" speed="13.89" length="50.00" shape="50.00,1.60 0.00,1.60"/>
    </edge>

    <tlLogic id="gneJ0" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>
    <tlLogic id="gneJ1" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>

<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements detexit inspect_selection friendlypos ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
7c7
<         <detExit lane="gneE0_0" pos="10.00" friendlyPos="1">
---
>         <detExit lane="gneE0_0" pos="10.00">
---------- Differences in errors ----------
19,46c19,20
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e3Detector 'E3_0'
< Debug: Setting new attribute selected 'true' into e3Detector 'E3_1'
< Debug: Setting new attribute selected 'true' into detEntry 'E3_0detEntry1'
< Debug: Setting new attribute selected 'true' into detEntry 'E3_1detEntry1'
< Debug: Setting new attribute selected 'true' into detExit 'E3_0detExit0'
< Debug: Setting new attribute selected 'true' into detExit 'E3_1detExit0'
< Debug: Setting new attribute friendlyPos 'true' into detExit 'E3_0detExit0'
< Debug: Setting new attribute friendlyPos 'true' into detExit 'E3_1detExit0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute friendlyPos '1' into detExit 'E3_1detExit0'
< Debug: Setting previous attribute friendlyPos '0' into detExit 'E3_0detExit0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into detExit 'E3_1detExit0'
< Debug: Setting previous attribute selected '0' into detExit 'E3_0detExit0'
< Debug: Setting previous attribute selected '0' into detEntry 'E3_1detEntry1'
< Debug: Setting previous attribute selected '0' into detEntry 'E3_0detEntry1'
< Debug: Setting previous attribute selected '0' into e3Detector 'E3_1'
< Debug: Setting previous attribute selected '0' into e3Detector 'E3_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements detexit inspect_selection parameters ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
19,145c19
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e3Detector 'E3_0'
< Debug: Setting new attribute selected 'true' into e3Detector 'E3_1'
< Debug: Setting new attribute selected 'true' into detEntry 'E3_0detEntry1'
< Debug: Setting new attribute selected 'true' into detEntry 'E3_1detEntry1'
< Debug: Setting new attribute selected 'true' into detExit 'E3_0detExit0'
< Debug: Setting new attribute selected 'true' into detExit 'E3_1detExit0'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into detExit 'E3_0detExit0'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into detExit 'E3_1detExit0'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into detExit 'E3_0detExit0'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into detExit 'E3_1detExit0'
< Debug: Setting new attribute genericParameter '' into detExit 'E3_0detExit0'
< Debug: Setting new attribute genericParameter '' into detExit 'E3_1detExit0'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into detExit 'E3_0detExit0'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into detExit 'E3_1detExit0'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into detExit 'E3_0detExit0'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into detExit 'E3_1detExit0'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into detExit 'E3_0detExit0'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into detExit 'E3_1detExit0'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into detExit 'E3_0detExit0'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into detExit 'E3_1detExit0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into detExit 'E3_1detExit0'
< Debug: Setting previous attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into detExit 'E3_0detExit0'
< Debug: Keys Ctrl+Z (Undo) pressed
<truncated after showing first 30 lines>
---------- Differences in log ----------
1,3d0
< Warning: Invalid format of parameter (dummyGenericParameters)
< Warning: Invalid format of parameter (key1)
< Warning: Invalid format of parameter (keyInvalid.;%>%$$=value1)
---------- Differences in output ----------
17c17
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <e3Detector id="E3_0" pos="7.50,3.00" freq="100.00" file="fileA.txt">
        <detEntry lane="gneE0_0" pos="15.00"/>
        <detExit lane="gneE0_0" pos="10.00">
            <param key="keyFinal1" value="value1"/>
            <param key="keyFinal2" value="value2"/>
            <param key="keyFinal3" value="value3"/>
        </detExit>
    </e3Detector>
    <e3Detector id="E3_1" pos="17.50,3.00" freq="100.00" file="fileB.txt">
        <detEntry lane="gneE0_0" pos="25.00"/>
        <detExit lane="gneE0_0" pos="20.00" friendlyPos="1">
            <param key="keyFinal1" value="value1"/>
            <param key="keyFinal2" value="value2"/>
            <param key="keyFinal3" value="value3"/>
        </detExit>
    </e3Detector>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>

    <edge id=":gneJ0_0" function="internal">
        <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
    </edge>
    <edge id=":gneJ1_0" function="internal">
        <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
    </edge>

    <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1">
        <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
    </edge>
    <edge id="gneE1" from="gneJ1" to="gneJ0" priority="1">
        <lane id="gneE1_0" index="0" speed="13.89" length="50.00" shape="50.00,1.60 0.00,1.60"/>
    </edge>

    <tlLogic id="gneJ0" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>
    <tlLogic id="gneJ1" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>

<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements detexit inspect_selection parent ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
4a5,12
>     <e3Detector id="E3_0" pos="7.50,3.00" freq="100.00" file="fileA.txt">
>         <detEntry lane="gneE0_0" pos="15.00"/>
>         <detExit lane="gneE0_0" pos="10.00">
>             <param key="KeyA1" value="valueA1"/>
>             <param key="KeyA2" value="valueA3"/>
>             <param key="KeyA3" value="valueA2"/>
>         </detExit>
>     </e3Detector>
11,15d18
<         </detExit>
<         <detExit lane="gneE0_0" pos="10.00">
<             <param key="KeyA1" value="valueA1"/>
<             <param key="KeyA2" value="valueA3"/>
<             <param key="KeyA3" value="valueA2"/>
---------- Differences in errors ----------
19,44d18
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e3Detector 'E3_0'
< Debug: Setting new attribute selected 'true' into e3Detector 'E3_1'
< Debug: Setting new attribute selected 'true' into detEntry 'E3_0detEntry1'
< Debug: Setting new attribute selected 'true' into detEntry 'E3_1detEntry1'
< Debug: Setting new attribute selected 'true' into detExit 'E3_0detExit0'
< Debug: Setting new attribute selected 'true' into detExit 'E3_1detExit0'
< Debug: Setting new attribute parentItem 'E3_1' into detExit 'E3_0detExit0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute parentItem 'E3_0' into detExit 'E3_0detExit0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into detExit 'E3_1detExit0'
< Debug: Setting previous attribute selected '0' into detExit 'E3_0detExit0'
< Debug: Setting previous attribute selected '0' into detEntry 'E3_1detEntry1'
< Debug: Setting previous attribute selected '0' into detEntry 'E3_0detEntry1'
< Debug: Setting previous attribute selected '0' into e3Detector 'E3_1'
< Debug: Setting previous attribute selected '0' into e3Detector 'E3_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
49d22
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
54a28,29
<truncated after showing first 30 lines>
---------- Differences in log ----------
1,2c1,3
< Warning: An e3Detector need at least one detExit detector
< Warning: e3Detector with ID='E3_0' cannot be written
---
> Warning: Invalid format of parameter (invalidE3)
> Warning: Invalid format of parameter (E3_1)
> Warning: Invalid format of parameter (E3_1i)

TEST FAILED on ts-sim-winbuild-ba : additionalElements detexit lock_unlock ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
7c7
<         <detExit lane="gneE1_0" pos="23.00"/>
---
>         <detExit lane="gneE1_0" pos="33.00"/>
---------- Differences in errors ----------
15,18c15,18
< Debug: Setting new attribute pos '27.00' into detExit 'e3Detector_0detExit0'
< Debug: Setting new attribute blockMovement 'true' into detExit 'e3Detector_0detExit0'
< Debug: Setting new attribute blockMovement 'false' into detExit 'e3Detector_0detExit0'
< Debug: Setting new attribute pos '23.00' into detExit 'e3Detector_0detExit0'
---
> Error: Shape of a(n) user-supplied shape is broken: the position is neither x,y nor x,y,z.
> Debug: Value ' m' for attribute shape of edge isn't valid
> Error: Shape of a(n) user-supplied shape is broken: the position is neither x,y nor x,y,z.
> Debug: Value ' m' for attribute shape of edge isn't valid
21c21
< Debug: Setting previous attribute pos '27.00' into detExit 'e3Detector_0detExit0'
---
> Debug: Removing detEntry 'e3Detector_0detEntry1' in GNEChange_Additional
24c24
< Debug: Setting previous attribute blockMovement '1' into detExit 'e3Detector_0detExit0'
---
> Debug: Removing detExit 'e3Detector_0detExit0' in GNEChange_Additional
27c27
< Debug: Setting previous attribute blockMovement '0' into detExit 'e3Detector_0detExit0'
---
> Debug: Removing e3Detector 'e3Detector_0' in GNEChange_Additional
29,30d28
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '33.00' into detExit 'e3Detector_0detExit0'
32,33d29
< Debug: Calling GNEUndoList::undo()
< Debug: Removing detEntry 'e3Detector_0detEntry1' in GNEChange_Additional
35,36d30
< Debug: Calling GNEUndoList::undo()
<truncated after showing first 30 lines>
---------- Differences in guisettingsoutput ----------
2c2
<     <viewport zoom="296.00" x="25.00" y="0.00" angle="0.00"/>
---
>     <viewport zoom="296.00" x="14.14" y="0.00" angle="0.00"/>
---------- Differences in log ----------
0a1,2
> Error: Shape of a(n) user-supplied shape is broken: the position is neither x,y nor x,y,z.
> Error: Shape of a(n) user-supplied shape is broken: the position is neither x,y nor x,y,z.

TEST FAILED on ts-sim-winbuild-ba : additionalElements detexit move ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
7c7
<         <detExit lane="gneE1_0" pos="23.00"/>
---
>         <detExit lane="gneE1_0" pos="33.00"/>
---------- Differences in errors ----------
16,27d15
< Debug: Setting new attribute pos '37.00' into detExit 'e3Detector_0detExit0'
< Debug: Setting new attribute pos '32.00' into detExit 'e3Detector_0detExit0'
< Debug: Setting new attribute pos '23.00' into detExit 'e3Detector_0detExit0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '32.00' into detExit 'e3Detector_0detExit0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '37.00' into detExit 'e3Detector_0detExit0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '33.00' into detExit 'e3Detector_0detExit0'
38a27,29
> Debug: Keys Ctrl+Z (Undo) pressed
> Debug: Keys Ctrl+Z (Undo) pressed
> Debug: Keys Ctrl+Z (Undo) pressed
49,50d39
< Debug: Calling GNEUndoList::redo()
< Debug: Setting new attribute pos '37.00' into detExit 'e3Detector_0detExit0'
52,53d40
< Debug: Calling GNEUndoList::redo()
< Debug: Setting new attribute pos '32.00' into detExit 'e3Detector_0detExit0'
55,56d41
< Debug: Calling GNEUndoList::redo()
< Debug: Setting new attribute pos '23.00' into detExit 'e3Detector_0detExit0'
---------- Differences in guisettingsoutput ----------
2c2
<     <viewport zoom="105.71" x="25.00" y="0.00" angle="0.00"/>
---
>     <viewport zoom="105.71" x="11.50" y="0.00" angle="0.00"/>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e1InstantDetector inspect_selection blockmove ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
15,75c15
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into instantInductionLoop 'E1_A'
< Debug: Setting new attribute selected 'true' into instantInductionLoop 'E1_B'
< Debug: Setting new attribute blockMovement 'true' into instantInductionLoop 'E1_A'
< Debug: Setting new attribute blockMovement 'true' into instantInductionLoop 'E1_B'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute blockMovement '0' into instantInductionLoop 'E1_B'
< Debug: Setting previous attribute blockMovement '0' into instantInductionLoop 'E1_A'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into instantInductionLoop 'E1_B'
< Debug: Setting previous attribute selected '0' into instantInductionLoop 'E1_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Removing instantInductionLoop 'E1_B' in GNEChange_Additional
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
< Debug: Removing instantInductionLoop 'E1_A' in GNEChange_Additional
< Debug: Removed inspected element from Inspected ACs. 0 ACs remains.
< Debug: Keys Ctrl+Y (Redo) pressed
< Debug: Calling GNEUndoList::redo()
< Debug: Adding instantInductionLoop 'E1_A' in GNEChange_Additional
<truncated after showing first 30 lines>
---------- Differences in output ----------
7c7
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <instantInductionLoop id="E1_A" lane="gneE0_0" pos="6.00" name="DetectorA" file="fileA.txt" vTypes="Type1 Type2 Type3">
        <param key="KeyA1" value="valueA1"/>
        <param key="KeyA2" value="valueA3"/>
        <param key="KeyA3" value="valueA2"/>
    </instantInductionLoop>
    <instantInductionLoop id="E1_B" lane="gneE0_0" pos="10.00" name="DetectorB" file="fileB.txt" vTypes="Type4 Type5 Type6" friendlyPos="1">
        <param key="KeyB1" value="valueB1"/>
        <param key="KeyB2" value="valueB3"/>
        <param key="KeyB3" value="valueB2"/>
    </instantInductionLoop>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>

    <edge id=":gneJ0_0" function="internal">
        <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
    </edge>
    <edge id=":gneJ1_0" function="internal">
        <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
    </edge>

    <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1">
        <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
    </edge>
    <edge id="gneE1" from="gneJ1" to="gneJ0" priority="1">
        <lane id="gneE1_0" index="0" speed="13.89" length="50.00" shape="50.00,1.60 0.00,1.60"/>
    </edge>

    <tlLogic id="gneJ0" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>
    <tlLogic id="gneJ1" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>

<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e1InstantDetector inspect_selection file ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <instantInductionLoop id="E1_A" lane="gneE0_0" pos="6.00" name="DetectorA" file="myOwnOutput.txt" vTypes="Type1 Type2 Type3">
---
>     <instantInductionLoop id="E1_A" lane="gneE0_0" pos="6.00" name="DetectorA" file="fileA.txt" vTypes="Type1 Type2 Type3">
10c10
<     <instantInductionLoop id="E1_B" lane="gneE0_0" pos="10.00" name="DetectorB" file="myOwnOutput.txt" vTypes="Type4 Type5 Type6" friendlyPos="1">
---
>     <instantInductionLoop id="E1_B" lane="gneE0_0" pos="10.00" name="DetectorB" file="fileB.txt" vTypes="Type4 Type5 Type6" friendlyPos="1">
---------- Differences in errors ----------
15,35c15,17
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into instantInductionLoop 'E1_A'
< Debug: Setting new attribute selected 'true' into instantInductionLoop 'E1_B'
< Debug: Value '%%%;:..&&%$%$' for attribute file of instantInductionLoop isn't valid
< Debug: Setting new attribute file 'myOwnOutput.txt' into instantInductionLoop 'E1_A'
< Debug: Setting new attribute file 'myOwnOutput.txt' into instantInductionLoop 'E1_B'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute file 'fileB.txt' into instantInductionLoop 'E1_B'
< Debug: Setting previous attribute file 'fileA.txt' into instantInductionLoop 'E1_A'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into instantInductionLoop 'E1_B'
< Debug: Setting previous attribute selected '0' into instantInductionLoop 'E1_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value '%%%;:..&&%$%$' for attribute lane of instantInductionLoop isn't valid
> Debug: Value 'myOwnOutput.txt' for attribute lane of instantInductionLoop isn't valid
> Debug: Value 'myOwnOutput.txti' for attribute lane of instantInductionLoop isn't valid
39d20
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
42a24,25
> Debug: Keys Ctrl+Z (Undo) pressed
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e1InstantDetector inspect_selection friendlypos ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <instantInductionLoop id="E1_A" lane="gneE0_0" pos="6.00" name="DetectorA" file="fileA.txt" vTypes="Type1 Type2 Type3" friendlyPos="1">
---
>     <instantInductionLoop id="E1_A" lane="gneE0_0" pos="6.00" name="true" file="fileA.txt" vTypes="Type1 Type2 Type3">
---------- Differences in errors ----------
15,23c15,16
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into instantInductionLoop 'E1_A'
< Debug: Setting new attribute selected 'true' into instantInductionLoop 'E1_B'
< Debug: Value 'dummyTrue' for attribute friendlyPos of instantInductionLoop isn't valid
< Debug: Setting new attribute friendlyPos 'true' into instantInductionLoop 'E1_A'
< Debug: Setting new attribute friendlyPos 'true' into instantInductionLoop 'E1_B'
---
> Debug: Setting new attribute name 'dummyTrue' into instantInductionLoop 'E1_A'
> Debug: Setting new attribute name 'true' into instantInductionLoop 'E1_A'
26,27c19
< Debug: Setting previous attribute friendlyPos '1' into instantInductionLoop 'E1_B'
< Debug: Setting previous attribute friendlyPos '0' into instantInductionLoop 'E1_A'
---
> Debug: Setting previous attribute name 'dummyTrue' into instantInductionLoop 'E1_A'
30,35c22
< Debug: Setting previous attribute selected '0' into instantInductionLoop 'E1_B'
< Debug: Setting previous attribute selected '0' into instantInductionLoop 'E1_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Setting previous attribute name 'DetectorA' into instantInductionLoop 'E1_A'
39d25
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
49,54c35
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e1InstantDetector inspect_selection name ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5,10c5
<     <instantInductionLoop id="E1_A" lane="gneE0_0" pos="6.00" name="customName" file="fileA.txt" vTypes="Type1 Type2 Type3">
<         <param key="KeyA1" value="valueA1"/>
<         <param key="KeyA2" value="valueA3"/>
<         <param key="KeyA3" value="valueA2"/>
<     </instantInductionLoop>
<     <instantInductionLoop id="E1_B" lane="gneE0_0" pos="10.00" name="customName" file="fileB.txt" vTypes="Type4 Type5 Type6" friendlyPos="1">
---
>     <instantInductionLoop id="E1_B" lane="gneE0_0" pos="10.00" name="DetectorB" file="fileB.txt" vTypes="Type4 Type5 Type6" friendlyPos="1">
13a9,13
>     </instantInductionLoop>
>     <instantInductionLoop id="customName" lane="gneE0_0" pos="6.00" name="DetectorA" file="fileA.txt" vTypes="Type1 Type2 Type3">
>         <param key="KeyA1" value="valueA1"/>
>         <param key="KeyA2" value="valueA3"/>
>         <param key="KeyA3" value="valueA2"/>
---------- Differences in errors ----------
15,23c15,16
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into instantInductionLoop 'E1_A'
< Debug: Setting new attribute selected 'true' into instantInductionLoop 'E1_B'
< Debug: Value '%%%;:..&&%$%$' for attribute name of instantInductionLoop isn't valid
< Debug: Setting new attribute name 'customName' into instantInductionLoop 'E1_A'
< Debug: Setting new attribute name 'customName' into instantInductionLoop 'E1_B'
---
> Debug: Value '%%%;:..&&%$%$' for attribute id of instantInductionLoop isn't valid
> Debug: Setting new attribute id 'customName' into instantInductionLoop 'E1_A'
26,35c19
< Debug: Setting previous attribute name 'DetectorB' into instantInductionLoop 'E1_B'
< Debug: Setting previous attribute name 'DetectorA' into instantInductionLoop 'E1_A'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into instantInductionLoop 'E1_B'
< Debug: Setting previous attribute selected '0' into instantInductionLoop 'E1_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Setting previous attribute id 'E1_A' into instantInductionLoop 'customName'
39d22
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
42a26
> Debug: Keys Ctrl+Z (Undo) pressed
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e1InstantDetector inspect_selection parameters ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5,8c5,8
<     <instantInductionLoop id="E1_A" lane="gneE0_0" pos="6.00" name="DetectorA" file="fileA.txt" vTypes="Type1 Type2 Type3">
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>     <instantInductionLoop id="E1_A" lane="gneE0_0" pos="6.00" name="DetectorA" file="fileA.txt">
>         <param key="KeyA1" value="valueA1"/>
>         <param key="KeyA2" value="valueA3"/>
>         <param key="KeyA3" value="valueA2"/>
11,13c11,13
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>         <param key="KeyB1" value="valueB1"/>
>         <param key="KeyB2" value="valueB3"/>
>         <param key="KeyB3" value="valueB2"/>
---------- Differences in errors ----------
15,34c15,25
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into instantInductionLoop 'E1_A'
< Debug: Setting new attribute selected 'true' into instantInductionLoop 'E1_B'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into instantInductionLoop 'E1_A'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into instantInductionLoop 'E1_B'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into instantInductionLoop 'E1_A'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into instantInductionLoop 'E1_B'
< Debug: Setting new attribute genericParameter '' into instantInductionLoop 'E1_A'
< Debug: Setting new attribute genericParameter '' into instantInductionLoop 'E1_B'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into instantInductionLoop 'E1_A'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into instantInductionLoop 'E1_B'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into instantInductionLoop 'E1_A'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into instantInductionLoop 'E1_B'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into instantInductionLoop 'E1_A'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into instantInductionLoop 'E1_B'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into instantInductionLoop 'E1_A'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into instantInductionLoop 'E1_B'
---
> Debug: Setting new attribute vTypes 'dummyGenericParameters' into instantInductionLoop 'E1_A'
> Debug: Value 'key1|key2|key3' for attribute vTypes of instantInductionLoop isn't valid
> Debug: Value 'key1=value1|key2=value2|key3=value3' for attribute vTypes of instantInductionLoop isn't valid
> Debug: Value 'key1=|key2=|key3=' for attribute vTypes of instantInductionLoop isn't valid
> Debug: Setting new attribute vTypes '' into instantInductionLoop 'E1_A'
> Debug: Value 'key1duplicated=value1|key1duplicated=value2|key3=value3' for attribute vTypes of instantInductionLoop isn't valid
> Debug: Value 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' for attribute vTypes of instantInductionLoop isn't valid
> Debug: Value 'keyInvalid.;%>%$$=value1|key2=value2|key3=value3' for attribute vTypes of instantInductionLoop isn't valid
<truncated after showing first 30 lines>
---------- Differences in log ----------
1,3d0
< Warning: Invalid format of parameter (dummyGenericParameters)
< Warning: Invalid format of parameter (key1)
< Warning: Invalid format of parameter (keyInvalid.;%>%$$=value1)

TEST FAILED on ts-sim-winbuild-ba : additionalElements e1InstantDetector inspect_selection vtypes ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
10c10
<     <instantInductionLoop id="E1_B" lane="gneE0_0" pos="10.00" name="DetectorB" file="fileB.txt" vTypes="Type1 Type2 Type3" friendlyPos="1">
---
>     <instantInductionLoop id="E1_B" lane="gneE0_0" pos="10.00" name="DetectorB" file="fileB.txt" vTypes="Type4 Type5 Type6" friendlyPos="1">
---------- Differences in errors ----------
15,41c15,18
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into instantInductionLoop 'E1_A'
< Debug: Setting new attribute selected 'true' into instantInductionLoop 'E1_B'
< Debug: Setting new attribute vTypes '' into instantInductionLoop 'E1_A'
< Debug: Setting new attribute vTypes '' into instantInductionLoop 'E1_B'
< Debug: Value 'Type%%%%%1 T;;yp$2 Type3' for attribute vTypes of instantInductionLoop isn't valid
< Debug: Setting new attribute vTypes 'Type1 Type2 Type3' into instantInductionLoop 'E1_A'
< Debug: Setting new attribute vTypes 'Type1 Type2 Type3' into instantInductionLoop 'E1_B'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute vTypes '' into instantInductionLoop 'E1_B'
< Debug: Setting previous attribute vTypes '' into instantInductionLoop 'E1_A'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute vTypes 'Type4 Type5 Type6' into instantInductionLoop 'E1_B'
< Debug: Setting previous attribute vTypes 'Type1 Type2 Type3' into instantInductionLoop 'E1_A'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into instantInductionLoop 'E1_B'
< Debug: Setting previous attribute selected '0' into instantInductionLoop 'E1_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value '' for attribute pos of instantInductionLoop isn't valid
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e1InstantDetector lock_unlock ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <instantInductionLoop id="instantInductionLoop_gneE0_0_0" lane="gneE0_0" pos="35.00" file="instantInductionLoop_gneE0_0_0.xml"/>
---
>     <instantInductionLoop id="instantInductionLoop_gneE0_0_0" lane="gneE0_0" pos="17.00" file="instantInductionLoop_gneE0_0_0.xml"/>
---------- Differences in errors ----------
15c15,33
< Debug: Setting new attribute pos '27.00' into instantInductionLoop 'instantInductionLoop_gneE0_0_0'
---
> GLDebug: 	Removed object junction:gneJ0 from SUMORTree with boundary -12.00,-12.00,12.00,12.00
> GLDebug: 	Removed object junction:gneJ1 from SUMORTree with boundary 38.00,-12.00,62.00,12.00
> GLDebug: 	Removed object edge:gneE0 from SUMORTree with boundary -10.00,-11.60,60.00,10.00
> GLDebug: 	Inserted edge:gneE0 into SUMORTree with boundary 4.00,-11.60,60.00,10.00
> GLDebug: 	Removed object edge:gneE1 from SUMORTree with boundary -10.00,-10.00,60.00,11.60
> GLDebug: 	Inserted edge:gneE1 into SUMORTree with boundary 4.00,-10.00,60.00,11.60
> GLDebug: 	Inserted junction:gneJ1 into SUMORTree with boundary 38.00,-12.00,62.00,12.00
> GLDebug: 	Inserted junction:gneJ0 into SUMORTree with boundary 2.00,-12.00,26.00,12.00
> Debug: Setting new attribute pos '14.00,0.00' into junction 'gneJ0'
> GLDebug: 	Removed object junction:gneJ0 from SUMORTree with boundary 2.00,-12.00,26.00,12.00
> GLDebug: 	Removed object junction:gneJ1 from SUMORTree with boundary 38.00,-12.00,62.00,12.00
> GLDebug: 	Removed object edge:gneE0 from SUMORTree with boundary 4.00,-11.60,60.00,10.00
> GLDebug: 	Inserted edge:gneE0 into SUMORTree with boundary 4.00,-11.60,60.00,10.00
> GLDebug: 	Removed object edge:gneE1 from SUMORTree with boundary 4.00,-10.00,60.00,11.60
> GLDebug: 	Inserted edge:gneE1 into SUMORTree with boundary 4.00,-10.00,60.00,11.60
> GLDebug: 	Inserted junction:gneJ1 into SUMORTree with boundary 38.00,-12.00,62.00,12.00
> GLDebug: 	Inserted junction:gneJ0 into SUMORTree with boundary 2.00,-12.00,26.00,12.00
> Debug: net has to be saved
> Debug: Current saving Status: net unsaved, additionals unsaved, demand elements saved, data sets saved
17,18c35,52
< Debug: Setting new attribute blockMovement 'false' into instantInductionLoop 'instantInductionLoop_gneE0_0_0'
< Debug: Setting new attribute pos '35.00' into instantInductionLoop 'instantInductionLoop_gneE0_0_0'
---
> GLDebug: 	Removed object junction:gneJ0 from SUMORTree with boundary 2.00,-12.00,26.00,12.00
> GLDebug: 	Removed object junction:gneJ1 from SUMORTree with boundary 38.00,-12.00,62.00,12.00
> GLDebug: 	Removed object edge:gneE0 from SUMORTree with boundary 4.00,-11.60,60.00,10.00
> GLDebug: 	Inserted edge:gneE0 into SUMORTree with boundary 15.00,-11.60,60.00,10.00
<truncated after showing first 30 lines>
---------- Differences in guisettingsoutput ----------
2c2
<     <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
---
>     <viewport zoom="100.00" x="14.43" y="0.00" angle="0.00"/>
---------- Differences in net ----------
6c6
<     <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>
---
>     <location netOffset="25.00,0.00" convBoundary="25.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>
9c9
<         <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
---
>         <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="25.00,1.60 23.80,0.80 23.40,0.00 23.80,-0.80 25.00,-1.60"/>
16c16
<         <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
---
>         <lane id="gneE0_0" index="0" speed="13.89" length="25.00" shape="25.00,-1.60 50.00,-1.60"/>
19c19
<         <lane id="gneE1_0" index="0" speed="13.89" length="50.00" shape="50.00,1.60 0.00,1.60"/>
---
>         <lane id="gneE1_0" index="0" speed="13.89" length="25.00" shape="50.00,1.60 25.00,1.60"/>
31c31
<     <junction id="gneJ0" type="traffic_light" x="0.00" y="0.00" incLanes="gneE1_0" intLanes=":gneJ0_0_0" shape="0.00,0.00 0.00,3.20 0.00,0.00">
---
>     <junction id="gneJ0" type="traffic_light" x="25.00" y="0.00" incLanes="gneE1_0" intLanes=":gneJ0_0_0" shape="25.00,0.00 25.00,3.20 25.00,0.00" name=" m">

TEST FAILED on ts-sim-winbuild-ba : additionalElements e1InstantDetector move ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
15,80d14
< Debug: Setting new attribute pos '12.00' into instantInductionLoop 'instantInductionLoop_gneE0_0_0'
< Debug: Setting new attribute pos '17.00' into instantInductionLoop 'instantInductionLoop_gneE0_0_0'
< Debug: Setting new attribute pos '27.00' into instantInductionLoop 'instantInductionLoop_gneE0_0_0'
< Debug: Setting new attribute pos '17.00' into instantInductionLoop 'instantInductionLoop_gneE0_0_0'
< Debug: Setting new attribute pos '0.00' into instantInductionLoop 'instantInductionLoop_gneE0_0_0'
< Debug: Setting new attribute pos '17.00' into instantInductionLoop 'instantInductionLoop_gneE0_0_0'
< Debug: Setting new attribute pos '50.00' into instantInductionLoop 'instantInductionLoop_gneE0_0_0'
< Debug: Setting new attribute pos '33.00' into instantInductionLoop 'instantInductionLoop_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '50.00' into instantInductionLoop 'instantInductionLoop_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '17.00' into instantInductionLoop 'instantInductionLoop_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '0.00' into instantInductionLoop 'instantInductionLoop_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '17.00' into instantInductionLoop 'instantInductionLoop_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '27.00' into instantInductionLoop 'instantInductionLoop_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '17.00' into instantInductionLoop 'instantInductionLoop_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '12.00' into instantInductionLoop 'instantInductionLoop_gneE0_0_0'
<truncated after showing first 30 lines>
---------- Differences in output ----------
8c8
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <instantInductionLoop id="instantInductionLoop_gneE0_0_0" lane="gneE0_0" pos="33.00" file="instantInductionLoop_gneE0_0_0.xml"/>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>

    <edge id=":gneJ0_0" function="internal">
        <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
    </edge>
    <edge id=":gneJ1_0" function="internal">
        <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
    </edge>

    <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1">
        <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
    </edge>
    <edge id="gneE1" from="gneJ1" to="gneJ0" priority="1">
        <lane id="gneE1_0" index="0" speed="13.89" length="50.00" shape="50.00,1.60 0.00,1.60"/>
    </edge>

    <tlLogic id="gneJ0" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>
    <tlLogic id="gneJ1" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>

<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e1detector inspect_selection blockmove ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
15,75c15
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e1Detector 'E1_A'
< Debug: Setting new attribute selected 'true' into e1Detector 'E1_B'
< Debug: Setting new attribute blockMovement 'true' into e1Detector 'E1_A'
< Debug: Setting new attribute blockMovement 'true' into e1Detector 'E1_B'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute blockMovement '0' into e1Detector 'E1_B'
< Debug: Setting previous attribute blockMovement '0' into e1Detector 'E1_A'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into e1Detector 'E1_B'
< Debug: Setting previous attribute selected '0' into e1Detector 'E1_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Removing e1Detector 'E1_B' in GNEChange_Additional
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
< Debug: Removing e1Detector 'E1_A' in GNEChange_Additional
< Debug: Removed inspected element from Inspected ACs. 0 ACs remains.
< Debug: Keys Ctrl+Y (Redo) pressed
< Debug: Calling GNEUndoList::redo()
< Debug: Adding e1Detector 'E1_A' in GNEChange_Additional
<truncated after showing first 30 lines>
---------- Differences in output ----------
7c7
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <e1Detector id="E1_A" lane="gneE0_0" pos="6.00" freq="120.00" name="DetectorA" file="fileA.txt" vTypes="Type1 Type2 Type3">
        <param key="KeyA1" value="valueA1"/>
        <param key="KeyA2" value="valueA3"/>
        <param key="KeyA3" value="valueA2"/>
    </e1Detector>
    <e1Detector id="E1_B" lane="gneE0_0" pos="10.00" freq="90.00" name="DetectorB" file="fileB.txt" vTypes="Type4 Type5 Type6" friendlyPos="1">
        <param key="KeyB1" value="valueB1"/>
        <param key="KeyB2" value="valueB3"/>
        <param key="KeyB3" value="valueB2"/>
    </e1Detector>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>

    <edge id=":gneJ0_0" function="internal">
        <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
    </edge>
    <edge id=":gneJ1_0" function="internal">
        <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
    </edge>

    <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1">
        <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
    </edge>
    <edge id="gneE1" from="gneJ1" to="gneJ0" priority="1">
        <lane id="gneE1_0" index="0" speed="13.89" length="50.00" shape="50.00,1.60 0.00,1.60"/>
    </edge>

    <tlLogic id="gneJ0" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>
    <tlLogic id="gneJ1" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>

<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e1detector inspect_selection file ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e1Detector id="E1_A" lane="gneE0_0" pos="6.00" freq="120.00" name="DetectorA" file="myOwnOutput.txt" vTypes="Type1 Type2 Type3">
---
>     <e1Detector id="E1_A" lane="gneE0_0" pos="6.00" freq="120.00" name="DetectorA" file="fileA.txt" vTypes="Type1 Type2 Type3">
10c10
<     <e1Detector id="E1_B" lane="gneE0_0" pos="10.00" freq="90.00" name="DetectorB" file="myOwnOutput.txt" vTypes="Type4 Type5 Type6" friendlyPos="1">
---
>     <e1Detector id="E1_B" lane="gneE0_0" pos="10.00" freq="90.00" name="DetectorB" file="fileB.txt" vTypes="Type4 Type5 Type6" friendlyPos="1">
---------- Differences in errors ----------
15,35c15,17
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e1Detector 'E1_A'
< Debug: Setting new attribute selected 'true' into e1Detector 'E1_B'
< Debug: Value '%%%;:..&&%$%$' for attribute file of e1Detector isn't valid
< Debug: Setting new attribute file 'myOwnOutput.txt' into e1Detector 'E1_A'
< Debug: Setting new attribute file 'myOwnOutput.txt' into e1Detector 'E1_B'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute file 'fileB.txt' into e1Detector 'E1_B'
< Debug: Setting previous attribute file 'fileA.txt' into e1Detector 'E1_A'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into e1Detector 'E1_B'
< Debug: Setting previous attribute selected '0' into e1Detector 'E1_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value '%%%;:..&&%$%$' for attribute pos of e1Detector isn't valid
> Debug: Value 'myOwnOutput.txt' for attribute pos of e1Detector isn't valid
> Debug: Value 'myOwnOutput.txti' for attribute pos of e1Detector isn't valid
39d20
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
42a24,25
> Debug: Keys Ctrl+Z (Undo) pressed
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e1detector inspect_selection freq ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e1Detector id="E1_A" lane="gneE0_0" pos="6.00" freq="120.00" name="DetectorA" file="fileA.txt" vTypes="Type1 Type2 Type3">
---
>     <e1Detector id="120" lane="gneE0_0" pos="6.00" freq="120.00" name="DetectorA" file="fileA.txt" vTypes="Type1 Type2 Type3">
10c10
<     <e1Detector id="E1_B" lane="gneE0_0" pos="10.00" freq="120.00" name="DetectorB" file="fileB.txt" vTypes="Type4 Type5 Type6" friendlyPos="1">
---
>     <e1Detector id="E1_B" lane="gneE0_0" pos="10.00" freq="90.00" name="DetectorB" file="fileB.txt" vTypes="Type4 Type5 Type6" friendlyPos="1">
---------- Differences in errors ----------
15,24c15,17
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e1Detector 'E1_A'
< Debug: Setting new attribute selected 'true' into e1Detector 'E1_B'
< Debug: Value 'dummyFrequency' for attribute freq of e1Detector isn't valid
< Debug: Value '-100' for attribute freq of e1Detector isn't valid
< Debug: Setting new attribute freq '120' into e1Detector 'E1_A'
< Debug: Setting new attribute freq '120' into e1Detector 'E1_B'
---
> Debug: Setting new attribute id 'dummyFrequency' into e1Detector 'E1_A'
> Debug: Setting new attribute id '-100' into e1Detector 'dummyFrequency'
> Debug: Setting new attribute id '120' into e1Detector '-100'
27,28c20
< Debug: Setting previous attribute freq '90.00' into e1Detector 'E1_B'
< Debug: Setting previous attribute freq '120.00' into e1Detector 'E1_A'
---
> Debug: Setting previous attribute id '-100' into e1Detector '120'
31,36c23,26
< Debug: Setting previous attribute selected '0' into e1Detector 'E1_B'
< Debug: Setting previous attribute selected '0' into e1Detector 'E1_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Setting previous attribute id 'dummyFrequency' into e1Detector '-100'
> Debug: Keys Ctrl+Z (Undo) pressed
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e1detector inspect_selection friendlypos ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e1Detector id="E1_A" lane="gneE0_0" pos="6.00" freq="120.00" name="DetectorA" file="fileA.txt" vTypes="Type1 Type2 Type3" friendlyPos="1">
---
>     <e1Detector id="E1_A" lane="gneE0_0" pos="6.00" freq="120.00" name="true" file="fileA.txt" vTypes="Type1 Type2 Type3">
---------- Differences in errors ----------
15,23c15,16
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e1Detector 'E1_A'
< Debug: Setting new attribute selected 'true' into e1Detector 'E1_B'
< Debug: Value 'dummyTrue' for attribute friendlyPos of e1Detector isn't valid
< Debug: Setting new attribute friendlyPos 'true' into e1Detector 'E1_A'
< Debug: Setting new attribute friendlyPos 'true' into e1Detector 'E1_B'
---
> Debug: Setting new attribute name 'dummyTrue' into e1Detector 'E1_A'
> Debug: Setting new attribute name 'true' into e1Detector 'E1_A'
26,27c19
< Debug: Setting previous attribute friendlyPos '1' into e1Detector 'E1_B'
< Debug: Setting previous attribute friendlyPos '0' into e1Detector 'E1_A'
---
> Debug: Setting previous attribute name 'dummyTrue' into e1Detector 'E1_A'
30,35c22
< Debug: Setting previous attribute selected '0' into e1Detector 'E1_B'
< Debug: Setting previous attribute selected '0' into e1Detector 'E1_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Setting previous attribute name 'DetectorA' into e1Detector 'E1_A'
39d25
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
49,54c35
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e1detector inspect_selection name ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e1Detector id="E1_A" lane="gneE0_0" pos="6.00" freq="120.00" name="customName" file="fileA.txt" vTypes="Type1 Type2 Type3">
---
>     <e1Detector id="E1_A" lane="gneE0_0" pos="6.00" freq="120.00" name="DetectorA" file="fileA.txt" vTypes="Type1 Type2 Type3">
10c10
<     <e1Detector id="E1_B" lane="gneE0_0" pos="10.00" freq="90.00" name="customName" file="fileB.txt" vTypes="Type4 Type5 Type6" friendlyPos="1">
---
>     <e1Detector id="E1_B" lane="gneE0_0" pos="10.00" freq="90.00" name="DetectorB" file="fileB.txt" vTypes="Type4 Type5 Type6" friendlyPos="1">
---------- Differences in errors ----------
15,35c15,17
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e1Detector 'E1_A'
< Debug: Setting new attribute selected 'true' into e1Detector 'E1_B'
< Debug: Value '%%%;:..&&%$%$' for attribute name of e1Detector isn't valid
< Debug: Setting new attribute name 'customName' into e1Detector 'E1_A'
< Debug: Setting new attribute name 'customName' into e1Detector 'E1_B'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute name 'DetectorB' into e1Detector 'E1_B'
< Debug: Setting previous attribute name 'DetectorA' into e1Detector 'E1_A'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into e1Detector 'E1_B'
< Debug: Setting previous attribute selected '0' into e1Detector 'E1_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value '%%%;:..&&%$%$' for attribute lane of e1Detector isn't valid
> Debug: Value 'customName' for attribute lane of e1Detector isn't valid
> Debug: Value 'customNamei' for attribute lane of e1Detector isn't valid
39d20
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
42a24,25
> Debug: Keys Ctrl+Z (Undo) pressed
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e1detector inspect_selection parameters ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5,8c5,8
<     <e1Detector id="E1_A" lane="gneE0_0" pos="6.00" freq="120.00" name="DetectorA" file="fileA.txt" vTypes="Type1 Type2 Type3">
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>     <e1Detector id="E1_A" lane="gneE0_0" pos="6.00" freq="120.00" name="DetectorA" file="fileA.txt">
>         <param key="KeyA1" value="valueA1"/>
>         <param key="KeyA2" value="valueA3"/>
>         <param key="KeyA3" value="valueA2"/>
11,13c11,13
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>         <param key="KeyB1" value="valueB1"/>
>         <param key="KeyB2" value="valueB3"/>
>         <param key="KeyB3" value="valueB2"/>
---------- Differences in errors ----------
15,34c15,25
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e1Detector 'E1_A'
< Debug: Setting new attribute selected 'true' into e1Detector 'E1_B'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into e1Detector 'E1_A'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into e1Detector 'E1_B'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into e1Detector 'E1_A'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into e1Detector 'E1_B'
< Debug: Setting new attribute genericParameter '' into e1Detector 'E1_A'
< Debug: Setting new attribute genericParameter '' into e1Detector 'E1_B'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into e1Detector 'E1_A'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into e1Detector 'E1_B'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into e1Detector 'E1_A'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into e1Detector 'E1_B'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into e1Detector 'E1_A'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into e1Detector 'E1_B'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into e1Detector 'E1_A'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into e1Detector 'E1_B'
---
> Debug: Setting new attribute vTypes 'dummyGenericParameters' into e1Detector 'E1_A'
> Debug: Value 'key1|key2|key3' for attribute vTypes of e1Detector isn't valid
> Debug: Value 'key1=value1|key2=value2|key3=value3' for attribute vTypes of e1Detector isn't valid
> Debug: Value 'key1=|key2=|key3=' for attribute vTypes of e1Detector isn't valid
> Debug: Setting new attribute vTypes '' into e1Detector 'E1_A'
> Debug: Value 'key1duplicated=value1|key1duplicated=value2|key3=value3' for attribute vTypes of e1Detector isn't valid
> Debug: Value 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' for attribute vTypes of e1Detector isn't valid
> Debug: Value 'keyInvalid.;%>%$$=value1|key2=value2|key3=value3' for attribute vTypes of e1Detector isn't valid
<truncated after showing first 30 lines>
---------- Differences in log ----------
1,3d0
< Warning: Invalid format of parameter (dummyGenericParameters)
< Warning: Invalid format of parameter (key1)
< Warning: Invalid format of parameter (keyInvalid.;%>%$$=value1)

TEST FAILED on ts-sim-winbuild-ba : additionalElements e1detector inspect_selection vtypes ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e1Detector id="E1_A" lane="gneE0_0" pos="6.00" freq="120.00" name="DetectorA" file="fileA.txt" vTypes="Type1 Type2 Type3">
---
>     <e1Detector id="E1_A" lane="gneE0_0" pos="6.00" freq="900.00" name="DetectorA" file="fileA.txt" vTypes="Type1 Type2 Type3">
10c10
<     <e1Detector id="E1_B" lane="gneE0_0" pos="10.00" freq="90.00" name="DetectorB" file="fileB.txt" vTypes="Type1 Type2 Type3" friendlyPos="1">
---
>     <e1Detector id="E1_B" lane="gneE0_0" pos="10.00" freq="90.00" name="DetectorB" file="fileB.txt" vTypes="Type4 Type5 Type6" friendlyPos="1">
---------- Differences in errors ----------
15,25c15,18
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e1Detector 'E1_A'
< Debug: Setting new attribute selected 'true' into e1Detector 'E1_B'
< Debug: Setting new attribute vTypes '' into e1Detector 'E1_A'
< Debug: Setting new attribute vTypes '' into e1Detector 'E1_B'
< Debug: Value 'Type%%%%%1 T;;yp$2 Type3' for attribute vTypes of e1Detector isn't valid
< Debug: Setting new attribute vTypes 'Type1 Type2 Type3' into e1Detector 'E1_A'
< Debug: Setting new attribute vTypes 'Type1 Type2 Type3' into e1Detector 'E1_B'
---
> Debug: Setting new attribute freq '900.00' into e1Detector 'E1_A'
> Debug: Value 'Type%%%%%1 T;;yp$2 Type3' for attribute freq of e1Detector isn't valid
> Debug: Value 'Type1 Type2 Type3' for attribute freq of e1Detector isn't valid
> Debug: Value 'Type1 Type2 Type3i' for attribute freq of e1Detector isn't valid
28,41c21
< Debug: Setting previous attribute vTypes '' into e1Detector 'E1_B'
< Debug: Setting previous attribute vTypes '' into e1Detector 'E1_A'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute vTypes 'Type4 Type5 Type6' into e1Detector 'E1_B'
< Debug: Setting previous attribute vTypes 'Type1 Type2 Type3' into e1Detector 'E1_A'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into e1Detector 'E1_B'
< Debug: Setting previous attribute selected '0' into e1Detector 'E1_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e1detector lock_unlock ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e1Detector id="e1Detector_gneE0_0_0" lane="gneE0_0" pos="35.00" freq="900.00" file="e1Detector_gneE0_0_0.xml"/>
---
>     <e1Detector id="e1Detector_gneE0_0_0" lane="gneE0_0" pos="17.00" freq="900.00" file="e1Detector_gneE0_0_0.xml"/>
---------- Differences in errors ----------
15c15,33
< Debug: Setting new attribute pos '27.00' into e1Detector 'e1Detector_gneE0_0_0'
---
> GLDebug: 	Removed object junction:gneJ0 from SUMORTree with boundary -12.00,-12.00,12.00,12.00
> GLDebug: 	Removed object junction:gneJ1 from SUMORTree with boundary 38.00,-12.00,62.00,12.00
> GLDebug: 	Removed object edge:gneE0 from SUMORTree with boundary -10.00,-11.60,60.00,10.00
> GLDebug: 	Inserted edge:gneE0 into SUMORTree with boundary 4.00,-12.60,60.04,10.00
> GLDebug: 	Removed object edge:gneE1 from SUMORTree with boundary -10.00,-10.00,60.00,11.60
> GLDebug: 	Inserted edge:gneE1 into SUMORTree with boundary 3.96,-11.00,60.00,11.60
> GLDebug: 	Inserted junction:gneJ1 into SUMORTree with boundary 38.00,-12.00,62.00,12.00
> GLDebug: 	Inserted junction:gneJ0 into SUMORTree with boundary 2.00,-13.00,26.00,11.00
> Debug: Setting new attribute pos '14.00,-1.00' into junction 'gneJ0'
> GLDebug: 	Removed object junction:gneJ0 from SUMORTree with boundary 2.00,-13.00,26.00,11.00
> GLDebug: 	Removed object junction:gneJ1 from SUMORTree with boundary 38.00,-12.00,62.00,12.00
> GLDebug: 	Removed object edge:gneE0 from SUMORTree with boundary 4.00,-12.60,60.04,10.00
> GLDebug: 	Inserted edge:gneE0 into SUMORTree with boundary 4.00,-12.60,60.04,10.00
> GLDebug: 	Removed object edge:gneE1 from SUMORTree with boundary 3.96,-11.00,60.00,11.60
> GLDebug: 	Inserted edge:gneE1 into SUMORTree with boundary 3.96,-11.00,60.00,11.60
> GLDebug: 	Inserted junction:gneJ1 into SUMORTree with boundary 38.00,-12.00,62.00,12.00
> GLDebug: 	Inserted junction:gneJ0 into SUMORTree with boundary 2.00,-13.00,26.00,11.00
> Debug: net has to be saved
> Debug: Current saving Status: net unsaved, additionals unsaved, demand elements saved, data sets saved
17,21c35,52
< Debug: Setting new attribute blockMovement 'false' into e1Detector 'e1Detector_gneE0_0_0'
< Debug: Setting new attribute pos '35.00' into e1Detector 'e1Detector_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '27.00' into e1Detector 'e1Detector_gneE0_0_0'
---
> GLDebug: 	Removed object junction:gneJ0 from SUMORTree with boundary 2.00,-13.00,26.00,11.00
<truncated after showing first 30 lines>
---------- Differences in guisettingsoutput ----------
2c2
<     <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
---
>     <viewport zoom="100.00" x="14.43" y="0.00" angle="0.00"/>
---------- Differences in net ----------
6c6
<     <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>
---
>     <location netOffset="25.00,0.00" convBoundary="25.00,-1.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>
9c9
<         <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
---
>         <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="24.94,0.60 23.77,-0.25 23.40,-1.06 23.83,-1.85 25.06,-2.60"/>
12c12
<         <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
---
>         <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.06,-1.60 51.23,-0.75 51.60,0.06 51.17,0.85 49.94,1.60"/>
16c16
<         <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
---
>         <lane id="gneE0_0" index="0" speed="13.89" length="25.02" shape="25.06,-2.60 50.06,-1.60"/>
19c19
<         <lane id="gneE1_0" index="0" speed="13.89" length="50.00" shape="50.00,1.60 0.00,1.60"/>
---
>         <lane id="gneE1_0" index="0" speed="13.89" length="25.02" shape="49.94,1.60 24.94,0.60"/>
31c31
<     <junction id="gneJ0" type="traffic_light" x="0.00" y="0.00" incLanes="gneE1_0" intLanes=":gneJ0_0_0" shape="0.00,0.00 0.00,3.20 0.00,0.00">
---
>     <junction id="gneJ0" type="traffic_light" x="25.00" y="-1.00" incLanes="gneE1_0" intLanes=":gneJ0_0_0" shape="25.00,-1.00 24.87,2.20 25.00,-1.00">
34c34
<     <junction id="gneJ1" type="traffic_light" x="50.00" y="0.00" incLanes="gneE0_0" intLanes=":gneJ1_0_0" shape="50.00,0.00 50.00,-3.20 50.00,0.00">
---
>     <junction id="gneJ1" type="traffic_light" x="50.00" y="0.00" incLanes="gneE0_0" intLanes=":gneJ1_0_0" shape="50.00,-0.00 50.13,-3.20 50.00,-0.00">

TEST FAILED on ts-sim-winbuild-ba : additionalElements e1detector move ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
15,80d14
< Debug: Setting new attribute pos '12.00' into e1Detector 'e1Detector_gneE0_0_0'
< Debug: Setting new attribute pos '17.00' into e1Detector 'e1Detector_gneE0_0_0'
< Debug: Setting new attribute pos '27.00' into e1Detector 'e1Detector_gneE0_0_0'
< Debug: Setting new attribute pos '17.00' into e1Detector 'e1Detector_gneE0_0_0'
< Debug: Setting new attribute pos '0.00' into e1Detector 'e1Detector_gneE0_0_0'
< Debug: Setting new attribute pos '17.00' into e1Detector 'e1Detector_gneE0_0_0'
< Debug: Setting new attribute pos '50.00' into e1Detector 'e1Detector_gneE0_0_0'
< Debug: Setting new attribute pos '33.00' into e1Detector 'e1Detector_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '50.00' into e1Detector 'e1Detector_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '17.00' into e1Detector 'e1Detector_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '0.00' into e1Detector 'e1Detector_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '17.00' into e1Detector 'e1Detector_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '27.00' into e1Detector 'e1Detector_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '17.00' into e1Detector 'e1Detector_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '12.00' into e1Detector 'e1Detector_gneE0_0_0'
<truncated after showing first 30 lines>
---------- Differences in output ----------
8c8
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <e1Detector id="e1Detector_gneE0_0_0" lane="gneE0_0" pos="33.00" freq="900.00" file="e1Detector_gneE0_0_0.xml"/>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>

    <edge id=":gneJ0_0" function="internal">
        <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
    </edge>
    <edge id=":gneJ1_0" function="internal">
        <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
    </edge>

    <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1">
        <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
    </edge>
    <edge id="gneE1" from="gneJ1" to="gneJ0" priority="1">
        <lane id="gneE1_0" index="0" speed="13.89" length="50.00" shape="50.00,1.60 0.00,1.60"/>
    </edge>

    <tlLogic id="gneJ0" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>
    <tlLogic id="gneJ1" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>

<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2MultiLaneDetector inspect_selection blockmove ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
19,32c19
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE5'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE3_0togneE4_0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE2_0togneE3_0'
< Debug: Setting new attribute selected 'true' into edge 'gneE4'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE4_0togneE5_0'
< Debug: Setting new attribute selected 'true' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute selected 'true' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting new attribute blockMovement 'true' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute blockMovement 'true' into e2MultilaneDetector 'e2MultilaneDetector_1'
---
> Debug: Setting new attribute friendlyPos 'false' into e2MultilaneDetector 'e2MultilaneDetector_0'
35,50c22
< Debug: Setting previous attribute blockMovement '0' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting previous attribute blockMovement '0' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting previous attribute selected '0' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE4_0togneE5_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE4'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE2_0togneE3_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE2'
< Debug: Setting previous attribute selected '0' into junction 'gneJ2'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE3_0togneE4_0'
<truncated after showing first 30 lines>
---------- Differences in output ----------
7c7
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <e2Detector id="e2MultilaneDetector_0" lanes="gneE2_0 gneE3_0" pos="11.00" endPos="11.00" freq="100.00" name="nameA" file="fileA.txt" vTypes="type1 type2 type3" friendlyPos="1">
        <param key="KeyA1" value="valueA1"/>
        <param key="KeyA2" value="valueA3"/>
        <param key="KeyA3" value="valueA2"/>
    </e2Detector>
    <e2Detector id="e2MultilaneDetector_1" lanes="gneE4_0 gneE5_0" pos="14.00" endPos="14.00" freq="200.00" name="nameB" file="fileB.xml" vTypes="type4 type5 type6" friendlyPos="1">
        <param key="KeyB1" value="valueB1"/>
        <param key="KeyB2" value="valueB3"/>
        <param key="KeyB3" value="valueB2"/>
    </e2Detector>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2MultiLaneDetector inspect_selection file ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
19,57c19,22
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE5'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE3_0togneE4_0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE2_0togneE3_0'
< Debug: Setting new attribute selected 'true' into edge 'gneE4'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE4_0togneE5_0'
< Debug: Setting new attribute selected 'true' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute selected 'true' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Value '%;;%%&%%%&&' for attribute file of e2MultilaneDetector isn't valid
< Debug: Setting new attribute file '' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute file '' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting new attribute file 'myOwnOutput.txt' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute file 'myOwnOutput.txt' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute file '' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting previous attribute file '' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute file 'fileB.xml' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting previous attribute file 'fileA.txt' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting previous attribute selected '0' into e2MultilaneDetector 'e2MultilaneDetector_0'
<truncated after showing first 30 lines>
---------- Differences in output ----------
10c10
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <e2Detector id="e2MultilaneDetector_0" lanes="gneE2_0 gneE3_0" pos="11.00" endPos="11.00" freq="100.00" name="nameA" file="myOwnOutput.txt" vTypes="type1 type2 type3" friendlyPos="1">
        <param key="KeyA1" value="valueA1"/>
        <param key="KeyA2" value="valueA3"/>
        <param key="KeyA3" value="valueA2"/>
    </e2Detector>
    <e2Detector id="e2MultilaneDetector_1" lanes="gneE4_0 gneE5_0" pos="14.00" endPos="14.00" freq="200.00" name="nameB" file="myOwnOutput.txt" vTypes="type4 type5 type6" friendlyPos="1">
        <param key="KeyB1" value="valueB1"/>
        <param key="KeyB2" value="valueB3"/>
        <param key="KeyB3" value="valueB2"/>
    </e2Detector>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2MultiLaneDetector inspect_selection freq ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
19,34c19,21
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE5'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE3_0togneE4_0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE2_0togneE3_0'
< Debug: Setting new attribute selected 'true' into edge 'gneE4'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE4_0togneE5_0'
< Debug: Setting new attribute selected 'true' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute selected 'true' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Value 'dummyFrequency' for attribute freq of e2MultilaneDetector isn't valid
< Debug: Value '-100' for attribute freq of e2MultilaneDetector isn't valid
< Debug: Setting new attribute freq '120' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute freq '120' into e2MultilaneDetector 'e2MultilaneDetector_1'
---
> Debug: Setting new attribute id 'dummyFrequency' into e2MultilaneDetector 'e2MultilaneDetector_0'
> Debug: Setting new attribute id '-100' into e2MultilaneDetector 'dummyFrequency'
> Debug: Setting new attribute id '120' into e2MultilaneDetector '-100'
37,38c24
< Debug: Setting previous attribute freq '200.00' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting previous attribute freq '100.00' into e2MultilaneDetector 'e2MultilaneDetector_0'
---
> Debug: Setting previous attribute id '-100' into e2MultilaneDetector '120'
41,52c27
< Debug: Setting previous attribute selected '0' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting previous attribute selected '0' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE4_0togneE5_0'
<truncated after showing first 30 lines>
---------- Differences in output ----------
10c10
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <e2Detector id="e2MultilaneDetector_0" lanes="gneE2_0 gneE3_0" pos="11.00" endPos="11.00" freq="120.00" name="nameA" file="fileA.txt" vTypes="type1 type2 type3" friendlyPos="1">
        <param key="KeyA1" value="valueA1"/>
        <param key="KeyA2" value="valueA3"/>
        <param key="KeyA3" value="valueA2"/>
    </e2Detector>
    <e2Detector id="e2MultilaneDetector_1" lanes="gneE4_0 gneE5_0" pos="14.00" endPos="14.00" freq="120.00" name="nameB" file="fileB.xml" vTypes="type4 type5 type6" friendlyPos="1">
        <param key="KeyB1" value="valueB1"/>
        <param key="KeyB2" value="valueB3"/>
        <param key="KeyB3" value="valueB2"/>
    </e2Detector>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2MultiLaneDetector inspect_selection friendlypos ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
19,32c19
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE5'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE3_0togneE4_0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE2_0togneE3_0'
< Debug: Setting new attribute selected 'true' into edge 'gneE4'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE4_0togneE5_0'
< Debug: Setting new attribute selected 'true' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute selected 'true' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting new attribute friendlyPos 'false' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute friendlyPos 'false' into e2MultilaneDetector 'e2MultilaneDetector_1'
---
> Debug: Setting new attribute vTypes ' i' into e2MultilaneDetector 'e2MultilaneDetector_0'
35,50c22
< Debug: Setting previous attribute friendlyPos '1' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting previous attribute friendlyPos '1' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting previous attribute selected '0' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE4_0togneE5_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE4'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE2_0togneE3_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE2'
< Debug: Setting previous attribute selected '0' into junction 'gneJ2'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE3_0togneE4_0'
<truncated after showing first 30 lines>
---------- Differences in output ----------
7c7
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <e2Detector id="e2MultilaneDetector_0" lanes="gneE2_0 gneE3_0" pos="11.00" endPos="11.00" freq="100.00" name="nameA" file="fileA.txt" vTypes="type1 type2 type3">
        <param key="KeyA1" value="valueA1"/>
        <param key="KeyA2" value="valueA3"/>
        <param key="KeyA3" value="valueA2"/>
    </e2Detector>
    <e2Detector id="e2MultilaneDetector_1" lanes="gneE4_0 gneE5_0" pos="14.00" endPos="14.00" freq="200.00" name="nameB" file="fileB.xml" vTypes="type4 type5 type6">
        <param key="KeyB1" value="valueB1"/>
        <param key="KeyB2" value="valueB3"/>
        <param key="KeyB3" value="valueB2"/>
    </e2Detector>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2MultiLaneDetector inspect_selection jamthreshold ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
19,34c19,21
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE5'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE3_0togneE4_0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE2_0togneE3_0'
< Debug: Setting new attribute selected 'true' into edge 'gneE4'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE4_0togneE5_0'
< Debug: Setting new attribute selected 'true' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute selected 'true' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Value 'dummyJamThreshold' for attribute jamThreshold of e2MultilaneDetector isn't valid
< Debug: Value '-11.1' for attribute jamThreshold of e2MultilaneDetector isn't valid
< Debug: Setting new attribute jamThreshold '7.3' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute jamThreshold '7.3' into e2MultilaneDetector 'e2MultilaneDetector_1'
---
> Debug: Setting new attribute file 'dummyJamThreshold' into e2MultilaneDetector 'e2MultilaneDetector_0'
> Debug: Setting new attribute file '-11.1' into e2MultilaneDetector 'e2MultilaneDetector_0'
> Debug: Setting new attribute file '7.3' into e2MultilaneDetector 'e2MultilaneDetector_0'
37,38c24
< Debug: Setting previous attribute jamThreshold '10.00' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting previous attribute jamThreshold '10.00' into e2MultilaneDetector 'e2MultilaneDetector_0'
---
> Debug: Setting previous attribute file '-11.1' into e2MultilaneDetector 'e2MultilaneDetector_0'
41,52c27
< Debug: Setting previous attribute selected '0' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting previous attribute selected '0' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE4_0togneE5_0'
<truncated after showing first 30 lines>
---------- Differences in output ----------
10c10
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <e2Detector id="e2MultilaneDetector_0" lanes="gneE2_0 gneE3_0" pos="11.00" endPos="11.00" freq="100.00" name="nameA" file="fileA.txt" vTypes="type1 type2 type3" jamThreshold="7.30" friendlyPos="1">
        <param key="KeyA1" value="valueA1"/>
        <param key="KeyA2" value="valueA3"/>
        <param key="KeyA3" value="valueA2"/>
    </e2Detector>
    <e2Detector id="e2MultilaneDetector_1" lanes="gneE4_0 gneE5_0" pos="14.00" endPos="14.00" freq="200.00" name="nameB" file="fileB.xml" vTypes="type4 type5 type6" jamThreshold="7.30" friendlyPos="1">
        <param key="KeyB1" value="valueB1"/>
        <param key="KeyB2" value="valueB3"/>
        <param key="KeyB3" value="valueB2"/>
    </e2Detector>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2MultiLaneDetector inspect_selection name ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
19,51c19,21
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE5'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE3_0togneE4_0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE2_0togneE3_0'
< Debug: Setting new attribute selected 'true' into edge 'gneE4'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE4_0togneE5_0'
< Debug: Setting new attribute selected 'true' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute selected 'true' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Value '%%%;:..&&%$%$' for attribute name of e2MultilaneDetector isn't valid
< Debug: Setting new attribute name 'customName' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute name 'customName' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute name 'nameB' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting previous attribute name 'nameA' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting previous attribute selected '0' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE4_0togneE5_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE4'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE2_0togneE3_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE2'
< Debug: Setting previous attribute selected '0' into junction 'gneJ2'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE3_0togneE4_0'
<truncated after showing first 30 lines>
---------- Differences in output ----------
9c9
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <e2Detector id="e2MultilaneDetector_0" lanes="gneE2_0 gneE3_0" pos="11.00" endPos="11.00" freq="100.00" name="customName" file="fileA.txt" vTypes="type1 type2 type3" friendlyPos="1">
        <param key="KeyA1" value="valueA1"/>
        <param key="KeyA2" value="valueA3"/>
        <param key="KeyA3" value="valueA2"/>
    </e2Detector>
    <e2Detector id="e2MultilaneDetector_1" lanes="gneE4_0 gneE5_0" pos="14.00" endPos="14.00" freq="200.00" name="customName" file="fileB.xml" vTypes="type4 type5 type6" friendlyPos="1">
        <param key="KeyB1" value="valueB1"/>
        <param key="KeyB2" value="valueB3"/>
        <param key="KeyB3" value="valueB2"/>
    </e2Detector>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2MultiLaneDetector inspect_selection parameters ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
19,44c19,28
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE5'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE3_0togneE4_0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE2_0togneE3_0'
< Debug: Setting new attribute selected 'true' into edge 'gneE4'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE4_0togneE5_0'
< Debug: Setting new attribute selected 'true' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute selected 'true' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting new attribute genericParameter '' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute genericParameter '' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into e2MultilaneDetector 'e2MultilaneDetector_1'
---
> Debug: Value 'dummyGenericParameters' for attribute speedThreshold of e2MultilaneDetector isn't valid
> Debug: Value 'key1|key2|key3' for attribute speedThreshold of e2MultilaneDetector isn't valid
<truncated after showing first 30 lines>
---------- Differences in log ----------
1,3d0
< Warning: Invalid format of parameter (dummyGenericParameters)
< Warning: Invalid format of parameter (key1)
< Warning: Invalid format of parameter (keyInvalid.;%>%$$=value1)
---------- Differences in output ----------
17c17
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <e2Detector id="e2MultilaneDetector_0" lanes="gneE2_0 gneE3_0" pos="11.00" endPos="11.00" freq="100.00" name="nameA" file="fileA.txt" vTypes="type1 type2 type3" friendlyPos="1">
        <param key="keyFinal1" value="value1"/>
        <param key="keyFinal2" value="value2"/>
        <param key="keyFinal3" value="value3"/>
    </e2Detector>
    <e2Detector id="e2MultilaneDetector_1" lanes="gneE4_0 gneE5_0" pos="14.00" endPos="14.00" freq="200.00" name="nameB" file="fileB.xml" vTypes="type4 type5 type6" friendlyPos="1">
        <param key="keyFinal1" value="value1"/>
        <param key="keyFinal2" value="value2"/>
        <param key="keyFinal3" value="value3"/>
    </e2Detector>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2MultiLaneDetector inspect_selection speedthreshold ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
19,34c19,21
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE5'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE3_0togneE4_0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE2_0togneE3_0'
< Debug: Setting new attribute selected 'true' into edge 'gneE4'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE4_0togneE5_0'
< Debug: Setting new attribute selected 'true' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute selected 'true' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Value 'dummySpeedTreshold' for attribute speedThreshold of e2MultilaneDetector isn't valid
< Debug: Value '-12.1' for attribute speedThreshold of e2MultilaneDetector isn't valid
< Debug: Setting new attribute speedThreshold '6.3' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute speedThreshold '6.3' into e2MultilaneDetector 'e2MultilaneDetector_1'
---
> Debug: Setting new attribute name 'dummySpeedTreshold' into e2MultilaneDetector 'e2MultilaneDetector_0'
> Debug: Setting new attribute name '-12.1' into e2MultilaneDetector 'e2MultilaneDetector_0'
> Debug: Setting new attribute name '6.3' into e2MultilaneDetector 'e2MultilaneDetector_0'
37,38c24
< Debug: Setting previous attribute speedThreshold '1.39' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting previous attribute speedThreshold '1.39' into e2MultilaneDetector 'e2MultilaneDetector_0'
---
> Debug: Setting previous attribute name '-12.1' into e2MultilaneDetector 'e2MultilaneDetector_0'
41,52c27
< Debug: Setting previous attribute selected '0' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting previous attribute selected '0' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE4_0togneE5_0'
<truncated after showing first 30 lines>
---------- Differences in output ----------
10c10
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <e2Detector id="e2MultilaneDetector_0" lanes="gneE2_0 gneE3_0" pos="11.00" endPos="11.00" freq="100.00" name="nameA" file="fileA.txt" vTypes="type1 type2 type3" speedThreshold="6.30" friendlyPos="1">
        <param key="KeyA1" value="valueA1"/>
        <param key="KeyA2" value="valueA3"/>
        <param key="KeyA3" value="valueA2"/>
    </e2Detector>
    <e2Detector id="e2MultilaneDetector_1" lanes="gneE4_0 gneE5_0" pos="14.00" endPos="14.00" freq="200.00" name="nameB" file="fileB.xml" vTypes="type4 type5 type6" speedThreshold="6.30" friendlyPos="1">
        <param key="KeyB1" value="valueB1"/>
        <param key="KeyB2" value="valueB3"/>
        <param key="KeyB3" value="valueB2"/>
    </e2Detector>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2MultiLaneDetector inspect_selection timethreshold ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
19,34c19,21
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE5'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE3_0togneE4_0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE2_0togneE3_0'
< Debug: Setting new attribute selected 'true' into edge 'gneE4'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE4_0togneE5_0'
< Debug: Setting new attribute selected 'true' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute selected 'true' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Value 'dummyTimeTreshold' for attribute timeThreshold of e2MultilaneDetector isn't valid
< Debug: Value '-5' for attribute timeThreshold of e2MultilaneDetector isn't valid
< Debug: Setting new attribute timeThreshold '4' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute timeThreshold '4' into e2MultilaneDetector 'e2MultilaneDetector_1'
---
> Debug: Value 'dummyTimeTreshold' for attribute freq of e2MultilaneDetector isn't valid
> Debug: Value '-5' for attribute freq of e2MultilaneDetector isn't valid
> Debug: Setting new attribute freq '4' into e2MultilaneDetector 'e2MultilaneDetector_0'
37,52c24
< Debug: Setting previous attribute timeThreshold '1.00' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting previous attribute timeThreshold '1.00' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting previous attribute selected '0' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE4_0togneE5_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE4'
<truncated after showing first 30 lines>
---------- Differences in output ----------
10c10
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <e2Detector id="e2MultilaneDetector_0" lanes="gneE2_0 gneE3_0" pos="11.00" endPos="11.00" freq="100.00" name="nameA" file="fileA.txt" vTypes="type1 type2 type3" timeThreshold="4.00" friendlyPos="1">
        <param key="KeyA1" value="valueA1"/>
        <param key="KeyA2" value="valueA3"/>
        <param key="KeyA3" value="valueA2"/>
    </e2Detector>
    <e2Detector id="e2MultilaneDetector_1" lanes="gneE4_0 gneE5_0" pos="14.00" endPos="14.00" freq="200.00" name="nameB" file="fileB.xml" vTypes="type4 type5 type6" timeThreshold="4.00" friendlyPos="1">
        <param key="KeyB1" value="valueB1"/>
        <param key="KeyB2" value="valueB3"/>
        <param key="KeyB3" value="valueB2"/>
    </e2Detector>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2MultiLaneDetector inspect_selection vtypes ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
19,51c19,21
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE5'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE3_0togneE4_0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE2_0togneE3_0'
< Debug: Setting new attribute selected 'true' into edge 'gneE4'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE4_0togneE5_0'
< Debug: Setting new attribute selected 'true' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute selected 'true' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Value 'Type%%%%%1 T;;yp$2 Type3' for attribute vTypes of e2MultilaneDetector isn't valid
< Debug: Setting new attribute vTypes 'Type1 Type2 Type3' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute vTypes 'Type1 Type2 Type3' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute vTypes 'type4 type5 type6' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting previous attribute vTypes 'type1 type2 type3' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into e2MultilaneDetector 'e2MultilaneDetector_1'
< Debug: Setting previous attribute selected '0' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE4_0togneE5_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE4'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE2_0togneE3_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE2'
< Debug: Setting previous attribute selected '0' into junction 'gneJ2'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE3_0togneE4_0'
<truncated after showing first 30 lines>
---------- Differences in output ----------
9c9
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <e2Detector id="e2MultilaneDetector_0" lanes="gneE2_0 gneE3_0" pos="11.00" endPos="11.00" freq="100.00" name="nameA" file="fileA.txt" vTypes="Type1 Type2 Type3" friendlyPos="1">
        <param key="KeyA1" value="valueA1"/>
        <param key="KeyA2" value="valueA3"/>
        <param key="KeyA3" value="valueA2"/>
    </e2Detector>
    <e2Detector id="e2MultilaneDetector_1" lanes="gneE4_0 gneE5_0" pos="14.00" endPos="14.00" freq="200.00" name="nameB" file="fileB.xml" vTypes="Type1 Type2 Type3" friendlyPos="1">
        <param key="KeyB1" value="valueB1"/>
        <param key="KeyB2" value="valueB3"/>
        <param key="KeyB3" value="valueB2"/>
    </e2Detector>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2MultiLaneDetector move ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e2Detector id="e2MultilaneDetector_0" lanes="gneE2_0 gneE3_0" pos="13.00" endPos="14.00" freq="900.00" file="e2MultilaneDetector_0.xml"/>
---
>     <e2Detector id="e2MultilaneDetector_0" lanes="gneE2_0 gneE3_0" pos="11.00" endPos="12.00" freq="900.00" file="e2MultilaneDetector_0.xml"/>
---------- Differences in errors ----------
41,48c41,65
< Debug: Setting new attribute pos '0.00' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute endPos '1.00' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute pos '21.00' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute endPos '22.00' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute pos '24.00' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute endPos '25.00' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute pos '13.00' into e2MultilaneDetector 'e2MultilaneDetector_0'
< Debug: Setting new attribute endPos '14.00' into e2MultilaneDetector 'e2MultilaneDetector_0'
---
> GLDebug: <-- Invalidating shape of junction 'gneJ0' -->
> GLDebug: 	Removed object junction:gneJ0 from SUMORTree with boundary -10.00,-13.20,10.00,13.20
> GLDebug: 	Inserted junction:gneJ0 into SUMORTree with boundary -12.00,-12.00,12.00,12.00
> GLDebug: <-- Invalidating shape of junction 'gneJ2' -->
> GLDebug: 	Removed object junction:gneJ2 from SUMORTree with boundary 15.00,-13.20,35.00,13.20
> GLDebug: 	Inserted junction:gneJ2 into SUMORTree with boundary 13.00,-12.00,37.00,12.00
> GLDebug: 	Removed object edge:gneE2 from SUMORTree with boundary -10.00,-11.60,35.00,10.00
> GLDebug: 	Inserted edge:gneE2 into SUMORTree with boundary -10.00,-11.60,35.00,10.00
> Debug: Setting new attribute shape '-7.35,0.00' into edge 'gneE2'
> GLDebug: 	Removed object edge:gneE2 from SUMORTree with boundary -10.00,-11.60,35.00,10.00
> GLDebug: 	Inserted edge:gneE2 into SUMORTree with boundary -18.95,-11.60,35.00,11.60
> Debug: net has to be saved
> Debug: Current saving Status: net unsaved, additionals unsaved, demand elements saved, data sets saved
> GLDebug: 	Removed object edge:gneE2 from SUMORTree with boundary -18.95,-11.60,35.00,11.60
> GLDebug: 	Inserted edge:gneE2 into SUMORTree with boundary -18.95,-11.60,35.00,11.60
> Debug: Setting new attribute shape '' into edge 'gneE2'
> GLDebug: 	Removed object edge:gneE2 from SUMORTree with boundary -18.95,-11.60,35.00,11.60
> GLDebug: 	Inserted edge:gneE2 into SUMORTree with boundary -10.00,-11.60,35.00,10.00
> GLDebug: <-- Invalidating shape of junction 'gneJ1' -->
> GLDebug: 	Removed object junction:gneJ1 from SUMORTree with boundary 40.00,-13.20,60.00,13.20
<truncated after showing first 30 lines>
---------- Differences in log ----------
0a1,3
> Warning: Merged shape's point
> Warning: Merged shape's point
> Warning: Merged shape's point

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2detector inspect blockmove ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
10d9
< Debug: Value ' i' for attribute distance of edge isn't valid
13a13
> Debug: Removed inspected element from Inspected ACs. 0 ACs remains.

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2detector inspect_selection blockmove ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
15,28d14
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_A'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_B'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into e2Detector 'E2_B'
< Debug: Setting previous attribute selected '0' into e2Detector 'E2_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
32d17
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
36a22
> Debug: Keys Ctrl+Z (Undo) pressed
42,48d27
< Debug: Calling GNEUndoList::redo()
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_A'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_B'
---------- Differences in log ----------
0a1
> Warning: Invalid format of parameter ( i)

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2detector inspect_selection file ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e2Detector id="E2_A" lane="gneE0_0" pos="5.00" length="5.00" freq="120.00" name="A" file="myOwnOutput.txt" vTypes="Type1 Type2 Type3">
---
>     <e2Detector id="E2_A" lane="gneE0_0" pos="5.00" length="10.00" freq="120.00" name="A" file="fileA.txt" vTypes="Type1 Type2 Type3">
10c10
<     <e2Detector id="E2_B" lane="gneE0_0" pos="15.00" length="5.00" freq="240.00" name="B" file="myOwnOutput.txt" vTypes="Type4 Type5 Type6" timeThreshold="2.00" speedThreshold="3.49" jamThreshold="5.00">
---
>     <e2Detector id="E2_B" lane="gneE0_0" pos="15.00" length="5.00" freq="240.00" name="B" file="fileB.txt" vTypes="Type4 Type5 Type6" timeThreshold="2.00" speedThreshold="3.49" jamThreshold="5.00">
---------- Differences in errors ----------
15,25c15,18
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_A'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_B'
< Debug: Value '%;;%%&%%%&&' for attribute file of e2Detector isn't valid
< Debug: Setting new attribute file '' into e2Detector 'E2_A'
< Debug: Setting new attribute file '' into e2Detector 'E2_B'
< Debug: Setting new attribute file 'myOwnOutput.txt' into e2Detector 'E2_A'
< Debug: Setting new attribute file 'myOwnOutput.txt' into e2Detector 'E2_B'
---
> Debug: Value '%;;%%&%%%&&' for attribute length of e2Detector isn't valid
> Debug: Setting new attribute length '10.00' into e2Detector 'E2_A'
> Debug: Value 'myOwnOutput.txt' for attribute length of e2Detector isn't valid
> Debug: Value 'myOwnOutput.txti' for attribute length of e2Detector isn't valid
28,41c21
< Debug: Setting previous attribute file '' into e2Detector 'E2_B'
< Debug: Setting previous attribute file '' into e2Detector 'E2_A'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute file 'fileB.txt' into e2Detector 'E2_B'
< Debug: Setting previous attribute file 'fileA.txt' into e2Detector 'E2_A'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into e2Detector 'E2_B'
< Debug: Setting previous attribute selected '0' into e2Detector 'E2_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2detector inspect_selection freq ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e2Detector id="E2_A" lane="gneE0_0" pos="5.00" length="5.00" freq="120.50" name="A" file="fileA.txt" vTypes="Type1 Type2 Type3">
---
>     <e2Detector id="E2_A" lane="gneE0_0" pos="5.00" length="5.00" freq="120.00" name="A" file="fileA.txt" vTypes="Type1 Type2 Type3">
10c10
<     <e2Detector id="E2_B" lane="gneE0_0" pos="15.00" length="5.00" freq="120.50" name="B" file="fileB.txt" vTypes="Type4 Type5 Type6" timeThreshold="2.00" speedThreshold="3.49" jamThreshold="5.00">
---
>     <e2Detector id="E2_B" lane="gneE0_0" pos="15.00" length="5.00" freq="240.00" name="B" file="fileB.txt" vTypes="Type4 Type5 Type6" timeThreshold="2.00" speedThreshold="3.49" jamThreshold="5.00">
---------- Differences in errors ----------
15,36c15,18
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_A'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_B'
< Debug: Value 'dummyFrequency' for attribute freq of e2Detector isn't valid
< Debug: Value '-100' for attribute freq of e2Detector isn't valid
< Debug: Setting new attribute freq '120.5' into e2Detector 'E2_A'
< Debug: Setting new attribute freq '120.5' into e2Detector 'E2_B'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute freq '240.00' into e2Detector 'E2_B'
< Debug: Setting previous attribute freq '120.00' into e2Detector 'E2_A'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into e2Detector 'E2_B'
< Debug: Setting previous attribute selected '0' into e2Detector 'E2_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value 'dummyFrequency' for attribute lane of e2Detector isn't valid
> Debug: Value '-100' for attribute lane of e2Detector isn't valid
> Debug: Value '120.5' for attribute lane of e2Detector isn't valid
> Debug: Value '120.5i' for attribute lane of e2Detector isn't valid
40d21
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2detector inspect_selection friendlypos ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e2Detector id="E2_A" lane="gneE0_0" pos="5.00" length="5.00" freq="120.00" name="A" file="fileA.txt" vTypes="Type1 Type2 Type3" friendlyPos="1">
---
>     <e2Detector id="E2_A" lane="gneE0_0" pos="5.00" length="5.00" freq="120.00" name="A" file="fileA.txt" vTypes="Type1 Type2 Type3">
10c10
<     <e2Detector id="E2_B" lane="gneE0_0" pos="15.00" length="5.00" freq="240.00" name="B" file="fileB.txt" vTypes="Type4 Type5 Type6" timeThreshold="2.00" speedThreshold="3.49" jamThreshold="5.00" friendlyPos="1">
---
>     <e2Detector id="E2_B" lane="gneE0_0" pos="15.00" length="5.00" freq="240.00" name="B" file="fileB.txt" vTypes="Type4 Type5 Type6" timeThreshold="2.00" speedThreshold="3.49" jamThreshold="5.00">
---------- Differences in errors ----------
15,34c15
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_A'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_B'
< Debug: Setting new attribute friendlyPos 'true' into e2Detector 'E2_A'
< Debug: Setting new attribute friendlyPos 'true' into e2Detector 'E2_B'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute friendlyPos '0' into e2Detector 'E2_B'
< Debug: Setting previous attribute friendlyPos '0' into e2Detector 'E2_A'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into e2Detector 'E2_B'
< Debug: Setting previous attribute selected '0' into e2Detector 'E2_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value ' i' for attribute timeThreshold of e2Detector isn't valid
38d18
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
41a22,23
> Debug: Keys Ctrl+Z (Undo) pressed
> Debug: Keys Ctrl+Z (Undo) pressed
47,53d28
< Debug: Calling GNEUndoList::redo()
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2detector inspect_selection jamthreshold ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e2Detector id="E2_A" lane="gneE0_0" pos="5.00" length="5.00" freq="120.00" name="A" file="fileA.txt" vTypes="Type1 Type2 Type3" jamThreshold="7.30">
---
>     <e2Detector id="E2_A" lane="gneE0_0" pos="5.00" length="5.00" freq="120.00" name="A" file="fileA.txt" vTypes="7.3">
10c10
<     <e2Detector id="E2_B" lane="gneE0_0" pos="15.00" length="5.00" freq="240.00" name="B" file="fileB.txt" vTypes="Type4 Type5 Type6" timeThreshold="2.00" speedThreshold="3.49" jamThreshold="7.30">
---
>     <e2Detector id="E2_B" lane="gneE0_0" pos="15.00" length="5.00" freq="240.00" name="B" file="fileB.txt" vTypes="Type4 Type5 Type6" timeThreshold="2.00" speedThreshold="3.49" jamThreshold="5.00">
---------- Differences in errors ----------
15,24c15,17
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_A'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_B'
< Debug: Value 'dummyJamThreshold' for attribute jamThreshold of e2Detector isn't valid
< Debug: Value '-11.1' for attribute jamThreshold of e2Detector isn't valid
< Debug: Setting new attribute jamThreshold '7.3' into e2Detector 'E2_A'
< Debug: Setting new attribute jamThreshold '7.3' into e2Detector 'E2_B'
---
> Debug: Setting new attribute vTypes 'dummyJamThreshold' into e2Detector 'E2_A'
> Debug: Setting new attribute vTypes '-11.1' into e2Detector 'E2_A'
> Debug: Setting new attribute vTypes '7.3' into e2Detector 'E2_A'
27,28c20
< Debug: Setting previous attribute jamThreshold '5.00' into e2Detector 'E2_B'
< Debug: Setting previous attribute jamThreshold '10.00' into e2Detector 'E2_A'
---
> Debug: Setting previous attribute vTypes '-11.1' into e2Detector 'E2_A'
31,36c23,26
< Debug: Setting previous attribute selected '0' into e2Detector 'E2_B'
< Debug: Setting previous attribute selected '0' into e2Detector 'E2_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Setting previous attribute vTypes 'dummyJamThreshold' into e2Detector 'E2_A'
> Debug: Keys Ctrl+Z (Undo) pressed
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2detector inspect_selection length ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e2Detector id="E2_A" lane="gneE0_0" pos="5.00" length="5.00" freq="120.00" name="A" file="fileA.txt" vTypes="Type1 Type2 Type3">
---
>     <e2Detector id="5" lane="gneE0_0" pos="5.00" length="5.00" freq="120.00" name="A" file="fileA.txt" vTypes="Type1 Type2 Type3">
---------- Differences in errors ----------
20,33c20,24
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_A'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_B'
< Debug: Value 'dummyLength' for attribute length of e2Detector isn't valid
< Debug: Value '-5' for attribute length of e2Detector isn't valid
< Debug: Setting new attribute length '0' into e2Detector 'E2_A'
< Debug: Setting new attribute length '0' into e2Detector 'E2_B'
< Debug: Setting new attribute length '500' into e2Detector 'E2_A'
< Debug: Setting new attribute length '500' into e2Detector 'E2_B'
< Debug: Setting new attribute length '5' into e2Detector 'E2_A'
< Debug: Setting new attribute length '5' into e2Detector 'E2_B'
---
> Debug: Setting new attribute id 'dummyLength' into e2Detector 'E2_A'
> Debug: Setting new attribute id '-5' into e2Detector 'dummyLength'
> Debug: Setting new attribute id '0' into e2Detector '-5'
> Debug: Setting new attribute id '500' into e2Detector '0'
> Debug: Setting new attribute id '5' into e2Detector '500'
36,37c27
< Debug: Setting previous attribute length '500.00' into e2Detector 'E2_B'
< Debug: Setting previous attribute length '500.00' into e2Detector 'E2_A'
---
> Debug: Setting previous attribute id '500' into e2Detector '5'
40,41c30
< Debug: Setting previous attribute length '0.00' into e2Detector 'E2_B'
< Debug: Setting previous attribute length '0.00' into e2Detector 'E2_A'
---
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2detector inspect_selection name ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e2Detector id="E2_A" lane="gneE0_0" pos="5.00" length="5.00" freq="120.00" name="customName" file="fileA.txt" vTypes="Type1 Type2 Type3">
---
>     <e2Detector id="E2_A" lane="gneE0_0" pos="5.00" length="5.00" freq="120.00" name="A" file="fileA.txt" vTypes="Type1 Type2 Type3">
10c10
<     <e2Detector id="E2_B" lane="gneE0_0" pos="15.00" length="5.00" freq="240.00" name="customName" file="fileB.txt" vTypes="Type4 Type5 Type6" timeThreshold="2.00" speedThreshold="3.49" jamThreshold="5.00">
---
>     <e2Detector id="E2_B" lane="gneE0_0" pos="15.00" length="5.00" freq="240.00" name="B" file="fileB.txt" vTypes="Type4 Type5 Type6" timeThreshold="2.00" speedThreshold="3.49" jamThreshold="5.00">
---------- Differences in errors ----------
15,35c15,17
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_A'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_B'
< Debug: Value '%%%;:..&&%$%$' for attribute name of e2Detector isn't valid
< Debug: Setting new attribute name 'customName' into e2Detector 'E2_A'
< Debug: Setting new attribute name 'customName' into e2Detector 'E2_B'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute name 'B' into e2Detector 'E2_B'
< Debug: Setting previous attribute name 'A' into e2Detector 'E2_A'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into e2Detector 'E2_B'
< Debug: Setting previous attribute selected '0' into e2Detector 'E2_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value '%%%;:..&&%$%$' for attribute pos of e2Detector isn't valid
> Debug: Value 'customName' for attribute pos of e2Detector isn't valid
> Debug: Value 'customNamei' for attribute pos of e2Detector isn't valid
39d20
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
42a24,25
> Debug: Keys Ctrl+Z (Undo) pressed
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2detector inspect_selection parameters ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
6,8c6,8
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>         <param key="KeyA1" value="valueA1"/>
>         <param key="KeyA2" value="valueA3"/>
>         <param key="KeyA3" value="valueA2"/>
11,13c11,13
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>         <param key="KeyB1" value="valueB1"/>
>         <param key="KeyB2" value="valueB3"/>
>         <param key="KeyB3" value="valueB2"/>
---------- Differences in errors ----------
15,34c15,24
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_A'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_B'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into e2Detector 'E2_A'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into e2Detector 'E2_B'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into e2Detector 'E2_A'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into e2Detector 'E2_B'
< Debug: Setting new attribute genericParameter '' into e2Detector 'E2_A'
< Debug: Setting new attribute genericParameter '' into e2Detector 'E2_B'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into e2Detector 'E2_A'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into e2Detector 'E2_B'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into e2Detector 'E2_A'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into e2Detector 'E2_B'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into e2Detector 'E2_A'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into e2Detector 'E2_B'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into e2Detector 'E2_A'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into e2Detector 'E2_B'
---
> Debug: Value 'dummyGenericParameters' for attribute jamThreshold of e2Detector isn't valid
> Debug: Value 'key1|key2|key3' for attribute jamThreshold of e2Detector isn't valid
> Debug: Value 'key1=value1|key2=value2|key3=value3' for attribute jamThreshold of e2Detector isn't valid
> Debug: Value 'key1=|key2=|key3=' for attribute jamThreshold of e2Detector isn't valid
> Debug: Value 'key1duplicated=value1|key1duplicated=value2|key3=value3' for attribute jamThreshold of e2Detector isn't valid
> Debug: Value 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' for attribute jamThreshold of e2Detector isn't valid
> Debug: Value 'keyInvalid.;%>%$$=value1|key2=value2|key3=value3' for attribute jamThreshold of e2Detector isn't valid
> Debug: Value 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' for attribute jamThreshold of e2Detector isn't valid
<truncated after showing first 30 lines>
---------- Differences in log ----------
1,3d0
< Warning: Invalid format of parameter (dummyGenericParameters)
< Warning: Invalid format of parameter (key1)
< Warning: Invalid format of parameter (keyInvalid.;%>%$$=value1)

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2detector inspect_selection speedthreshold ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e2Detector id="E2_A" lane="gneE0_0" pos="5.00" length="5.00" freq="120.00" name="A" file="fileA.txt" vTypes="Type1 Type2 Type3" speedThreshold="6.30">
---
>     <e2Detector id="E2_A" lane="gneE0_0" pos="5.00" length="5.00" freq="120.00" name="A" file="6.3" vTypes="Type1 Type2 Type3">
10c10
<     <e2Detector id="E2_B" lane="gneE0_0" pos="15.00" length="5.00" freq="240.00" name="B" file="fileB.txt" vTypes="Type4 Type5 Type6" timeThreshold="2.00" speedThreshold="6.30" jamThreshold="5.00">
---
>     <e2Detector id="E2_B" lane="gneE0_0" pos="15.00" length="5.00" freq="240.00" name="B" file="fileB.txt" vTypes="Type4 Type5 Type6" timeThreshold="2.00" speedThreshold="3.49" jamThreshold="5.00">
---------- Differences in errors ----------
15,24c15,17
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_A'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_B'
< Debug: Value 'dummySpeedTreshold' for attribute speedThreshold of e2Detector isn't valid
< Debug: Value '-12.1' for attribute speedThreshold of e2Detector isn't valid
< Debug: Setting new attribute speedThreshold '6.3' into e2Detector 'E2_A'
< Debug: Setting new attribute speedThreshold '6.3' into e2Detector 'E2_B'
---
> Debug: Setting new attribute file 'dummySpeedTreshold' into e2Detector 'E2_A'
> Debug: Setting new attribute file '-12.1' into e2Detector 'E2_A'
> Debug: Setting new attribute file '6.3' into e2Detector 'E2_A'
27,28c20
< Debug: Setting previous attribute speedThreshold '3.49' into e2Detector 'E2_B'
< Debug: Setting previous attribute speedThreshold '1.39' into e2Detector 'E2_A'
---
> Debug: Setting previous attribute file '-12.1' into e2Detector 'E2_A'
31,36c23,26
< Debug: Setting previous attribute selected '0' into e2Detector 'E2_B'
< Debug: Setting previous attribute selected '0' into e2Detector 'E2_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Setting previous attribute file 'dummySpeedTreshold' into e2Detector 'E2_A'
> Debug: Keys Ctrl+Z (Undo) pressed
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2detector inspect_selection timethreshold ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e2Detector id="E2_A" lane="gneE0_0" pos="5.00" length="5.00" freq="120.00" name="A" file="fileA.txt" vTypes="Type1 Type2 Type3" timeThreshold="4.50">
---
>     <e2Detector id="E2_A" lane="gneE0_0" pos="5.00" length="5.00" freq="120.00" name="4.5" file="fileA.txt" vTypes="Type1 Type2 Type3">
10c10
<     <e2Detector id="E2_B" lane="gneE0_0" pos="15.00" length="5.00" freq="240.00" name="B" file="fileB.txt" vTypes="Type4 Type5 Type6" timeThreshold="4.50" speedThreshold="3.49" jamThreshold="5.00">
---
>     <e2Detector id="E2_B" lane="gneE0_0" pos="15.00" length="5.00" freq="240.00" name="B" file="fileB.txt" vTypes="Type4 Type5 Type6" timeThreshold="2.00" speedThreshold="3.49" jamThreshold="5.00">
---------- Differences in errors ----------
15,24c15,17
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_A'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_B'
< Debug: Value 'dummyTimeTreshold' for attribute timeThreshold of e2Detector isn't valid
< Debug: Value '-5' for attribute timeThreshold of e2Detector isn't valid
< Debug: Setting new attribute timeThreshold '4.5' into e2Detector 'E2_A'
< Debug: Setting new attribute timeThreshold '4.5' into e2Detector 'E2_B'
---
> Debug: Setting new attribute name 'dummyTimeTreshold' into e2Detector 'E2_A'
> Debug: Setting new attribute name '-5' into e2Detector 'E2_A'
> Debug: Setting new attribute name '4.5' into e2Detector 'E2_A'
27,28c20
< Debug: Setting previous attribute timeThreshold '2.00' into e2Detector 'E2_B'
< Debug: Setting previous attribute timeThreshold '1.00' into e2Detector 'E2_A'
---
> Debug: Setting previous attribute name '-5' into e2Detector 'E2_A'
31,36c23,26
< Debug: Setting previous attribute selected '0' into e2Detector 'E2_B'
< Debug: Setting previous attribute selected '0' into e2Detector 'E2_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Setting previous attribute name 'dummyTimeTreshold' into e2Detector 'E2_A'
> Debug: Keys Ctrl+Z (Undo) pressed
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2detector inspect_selection vtypes ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
10c10
<     <e2Detector id="E2_B" lane="gneE0_0" pos="15.00" length="5.00" freq="240.00" name="B" file="fileB.txt" vTypes="Type1 Type2 Type3" timeThreshold="2.00" speedThreshold="3.49" jamThreshold="5.00">
---
>     <e2Detector id="E2_B" lane="gneE0_0" pos="15.00" length="5.00" freq="240.00" name="B" file="fileB.txt" vTypes="Type4 Type5 Type6" timeThreshold="2.00" speedThreshold="3.49" jamThreshold="5.00">
---------- Differences in errors ----------
15,33c15,17
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_A'
< Debug: Setting new attribute selected 'true' into e2Detector 'E2_B'
< Debug: Value 'Type%%%%%1 T;;yp$2 Type3' for attribute vTypes of e2Detector isn't valid
< Debug: Setting new attribute vTypes 'Type1 Type2 Type3' into e2Detector 'E2_B'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute vTypes 'Type4 Type5 Type6' into e2Detector 'E2_B'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into e2Detector 'E2_B'
< Debug: Setting previous attribute selected '0' into e2Detector 'E2_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value 'Type%%%%%1 T;;yp$2 Type3' for attribute freq of e2Detector isn't valid
> Debug: Value 'Type1 Type2 Type3' for attribute freq of e2Detector isn't valid
> Debug: Value 'Type1 Type2 Type3i' for attribute freq of e2Detector isn't valid
37d20
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
40a24,25
> Debug: Keys Ctrl+Z (Undo) pressed
> Debug: Keys Ctrl+Z (Undo) pressed
46,52d30
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2detector lock_unlock ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e2Detector id="e2Detector_gneE0_0_0" lane="gneE0_0" pos="31.00" length="10.00" freq="900.00" file="e2Detector_gneE0_0_0.xml"/>
---
>     <e2Detector id="e2Detector_gneE0_0_0" lane="gneE0_0" pos="16.00" length="10.00" freq="900.00" file="e2Detector_gneE0_0_0.xml"/>
---------- Differences in errors ----------
15c15,22
< Debug: Setting new attribute pos '23.00' into e2Detector 'e2Detector_gneE0_0_0'
---
> GLDebug: 	Removed object edge:gneE0 from SUMORTree with boundary -10.00,-11.60,60.00,10.00
> GLDebug: 	Inserted edge:gneE0 into SUMORTree with boundary -10.00,-11.60,60.00,10.00
> Debug: Setting new attribute shape '13.79,0.00' into edge 'gneE0'
> GLDebug: 	Removed object edge:gneE0 from SUMORTree with boundary -10.00,-11.60,60.00,10.00
> GLDebug: 	Inserted edge:gneE0 into SUMORTree with boundary -10.00,-11.60,60.00,10.00
> Debug: net has to be saved
> Debug: Current saving Status: net unsaved, additionals unsaved, demand elements saved, data sets saved
> Debug: Value ' m' for attribute shapeEnd of edge isn't valid
17,21c24,28
< Debug: Setting new attribute blockMovement 'false' into e2Detector 'e2Detector_gneE0_0_0'
< Debug: Setting new attribute pos '31.00' into e2Detector 'e2Detector_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '23.00' into e2Detector 'e2Detector_gneE0_0_0'
---
> GLDebug: 	Removed object edge:gneE0 from SUMORTree with boundary -10.00,-11.60,60.00,10.00
> GLDebug: 	Inserted edge:gneE0 into SUMORTree with boundary -10.00,-11.60,60.00,10.00
> Debug: Setting new attribute shape '17.49,0.00 13.79,0.00' into edge 'gneE0'
> GLDebug: 	Removed object edge:gneE0 from SUMORTree with boundary -10.00,-11.60,60.00,10.00
> GLDebug: 	Inserted edge:gneE0 into SUMORTree with boundary -10.00,-11.60,60.00,10.00
24c31,33
< Debug: Setting previous attribute blockMovement '1' into e2Detector 'e2Detector_gneE0_0_0'
---
> Debug: Setting previous attribute shape '13.79,0.00' into edge 'gneE0'
> GLDebug: 	Removed object edge:gneE0 from SUMORTree with boundary -10.00,-11.60,60.00,10.00
> GLDebug: 	Inserted edge:gneE0 into SUMORTree with boundary -10.00,-11.60,60.00,10.00
30c39,41
<truncated after showing first 30 lines>
---------- Differences in guisettingsoutput ----------
2c2
<     <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
---
>     <viewport zoom="100.00" x="14.96" y="0.00" angle="0.00"/>
---------- Differences in log ----------
0a1,4
> Warning: Found angle of 180.00 degrees at edge 'gneE0', segment 0.
> Warning: Found sharp turn with radius 0.00 at the start of edge 'gneE0'.
> Warning: Found angle of 180.00 degrees at edge 'gneE0', segment 1.
> Warning: Found sharp turn with radius 0.00 at the end of edge 'gneE0'.
---------- Differences in net ----------
9c9
<         <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
---
>         <lane id=":gneJ0_0_0" index="0" speed="3.69" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.61,0.01 -1.21,-0.80 -0.01,-1.60"/>
12c12
<         <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
---
>         <lane id=":gneJ1_0_0" index="0" speed="3.67" length="4.67" shape="49.79,-1.59 51.04,-0.87 51.49,-0.10 51.14,0.72 50.00,1.60"/>
15,16c15,16
<     <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1">
<         <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
---
>     <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1" shape="0.00,0.00 17.49,0.00 13.79,0.00 50.00,0.00">
>         <lane id="gneE0_0" index="0" speed="13.89" length="63.71" shape="-0.01,-1.60 19.09,0.00 12.19,0.00 49.79,-1.59"/>
31c31
<     <junction id="gneJ0" type="traffic_light" x="0.00" y="0.00" incLanes="gneE1_0" intLanes=":gneJ0_0_0" shape="0.00,0.00 0.00,3.20 0.00,0.00">
---
>     <junction id="gneJ0" type="traffic_light" x="0.00" y="0.00" incLanes="gneE1_0" intLanes=":gneJ0_0_0" shape="-0.00,-0.01 -0.02,-3.22 0.00,3.20">
34c34
<     <junction id="gneJ1" type="traffic_light" x="50.00" y="0.00" incLanes="gneE0_0" intLanes=":gneJ1_0_0" shape="50.00,0.00 50.00,-3.20 50.00,0.00">
---
>     <junction id="gneJ1" type="traffic_light" x="50.00" y="0.00" incLanes="gneE0_0" intLanes=":gneJ1_0_0" shape="50.00,0.00 50.00,3.20 49.72,-3.18">

TEST FAILED on ts-sim-winbuild-ba : additionalElements e2detector move ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e2Detector id="e2Detector_gneE0_0_0" lane="gneE0_0" pos="25.00" length="10.00" freq="900.00" file="e2Detector_gneE0_0_0.xml"/>
---
>     <e2Detector id="e2Detector_gneE0_0_0" lane="gneE0_0" pos="13.00" length="10.00" freq="900.00" file="e2Detector_gneE0_0_0.xml"/>
---------- Differences in errors ----------
15,43c15,93
< Debug: Setting new attribute pos '6.00' into e2Detector 'e2Detector_gneE0_0_0'
< Debug: Setting new attribute pos '11.00' into e2Detector 'e2Detector_gneE0_0_0'
< Debug: Setting new attribute pos '20.00' into e2Detector 'e2Detector_gneE0_0_0'
< Debug: Setting new attribute pos '9.00' into e2Detector 'e2Detector_gneE0_0_0'
< Debug: Setting new attribute pos '0.00' into e2Detector 'e2Detector_gneE0_0_0'
< Debug: Setting new attribute pos '15.00' into e2Detector 'e2Detector_gneE0_0_0'
< Debug: Setting new attribute pos '40.00' into e2Detector 'e2Detector_gneE0_0_0'
< Debug: Setting new attribute pos '25.00' into e2Detector 'e2Detector_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '40.00' into e2Detector 'e2Detector_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '15.00' into e2Detector 'e2Detector_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '0.00' into e2Detector 'e2Detector_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '9.00' into e2Detector 'e2Detector_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '20.00' into e2Detector 'e2Detector_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '11.00' into e2Detector 'e2Detector_gneE0_0_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '6.00' into e2Detector 'e2Detector_gneE0_0_0'
<truncated after showing first 30 lines>
---------- Differences in log ----------
0a1,3
> Warning: Found angle of 180.00 degrees at edge 'gneE0', segment 0.
> Warning: Found sharp turn with radius 0.00 at the start of edge 'gneE0'.
> Warning: Found angle of 180.00 degrees at edge 'gneE0', segment 2.
---------- Differences in net ----------
6c6
<     <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>
---
>     <location netOffset="25.00,0.00" convBoundary="-10.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>
9c9
<         <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
---
>         <lane id=":gneJ0_0_0" index="0" speed="3.66" length="4.67" shape="-10.00,1.60 -11.20,0.80 -11.60,0.00 -11.20,-0.80 -10.00,-1.60"/>
15,16c15,16
<     <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1">
<         <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
---
>     <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1" shape="-10.00,0.00 41.28,0.00 15.91,0.00 2.16,0.00 22.25,0.00 50.00,0.00">
>         <lane id="gneE0_0" index="0" speed="13.89" length="144.86" shape="-10.00,-1.60 42.88,0.00 15.91,1.60 0.56,0.00 22.25,-1.60 50.00,-1.60"/>
19c19
<         <lane id="gneE1_0" index="0" speed="13.89" length="50.00" shape="50.00,1.60 0.00,1.60"/>
---
>         <lane id="gneE1_0" index="0" speed="13.89" length="60.00" shape="50.00,1.60 -10.00,1.60"/>
31c31
<     <junction id="gneJ0" type="traffic_light" x="0.00" y="0.00" incLanes="gneE1_0" intLanes=":gneJ0_0_0" shape="0.00,0.00 0.00,3.20 0.00,0.00">
---
>     <junction id="gneJ0" type="traffic_light" x="-10.00" y="0.00" incLanes="gneE1_0" intLanes=":gneJ0_0_0" shape="-10.00,-0.00 -10.00,-3.20 -10.00,3.20">

TEST FAILED on ts-sim-winbuild-ba : additionalElements e3detector inspect_selection blockmove ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
19,46d18
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute selected 'true' into e3Detector 'e3Detector_B'
< Debug: Setting new attribute selected 'true' into detEntry 'e3Detector_AdetEntry0'
< Debug: Setting new attribute selected 'true' into detEntry 'e3Detector_BdetEntry0'
< Debug: Setting new attribute selected 'true' into detExit 'e3Detector_AdetExit1'
< Debug: Setting new attribute selected 'true' into detExit 'e3Detector_BdetExit1'
< Debug: Setting new attribute blockMovement 'true' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute blockMovement 'true' into e3Detector 'e3Detector_B'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute blockMovement '0' into e3Detector 'e3Detector_B'
< Debug: Setting previous attribute blockMovement '0' into e3Detector 'e3Detector_A'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into detExit 'e3Detector_BdetExit1'
< Debug: Setting previous attribute selected '0' into detExit 'e3Detector_AdetExit1'
< Debug: Setting previous attribute selected '0' into detEntry 'e3Detector_BdetEntry0'
< Debug: Setting previous attribute selected '0' into detEntry 'e3Detector_AdetEntry0'
< Debug: Setting previous attribute selected '0' into e3Detector 'e3Detector_B'
< Debug: Setting previous attribute selected '0' into e3Detector 'e3Detector_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
52d23
<truncated after showing first 30 lines>
---------- Differences in log ----------
0a1
> Warning: Invalid format of parameter ( i)

TEST FAILED on ts-sim-winbuild-ba : additionalElements e3detector inspect_selection file ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e3Detector id="e3Detector_A" pos="7.50,-2.00" freq="100.00" name="A" file="myOwnFilename.txt">
---
>     <e3Detector id="e3Detector_A" pos="7.50,-2.00" freq="100.00" name="A" file="fileA.txt">
12c12
<     <e3Detector id="e3Detector_B" pos="17.50,-2.00" freq="120.00" name="B" file="myOwnFilename.txt" timeThreshold="2.00" speedThreshold="3.39">
---
>     <e3Detector id="e3Detector_B" pos="17.50,-2.00" freq="120.00" name="B" file="fileB.txt" timeThreshold="2.00" speedThreshold="3.39">
---------- Differences in errors ----------
19,47c19,21
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute selected 'true' into e3Detector 'e3Detector_B'
< Debug: Setting new attribute selected 'true' into detEntry 'e3Detector_AdetEntry0'
< Debug: Setting new attribute selected 'true' into detEntry 'e3Detector_BdetEntry0'
< Debug: Setting new attribute selected 'true' into detExit 'e3Detector_AdetExit1'
< Debug: Setting new attribute selected 'true' into detExit 'e3Detector_BdetExit1'
< Debug: Value '&&&&&&&&' for attribute file of e3Detector isn't valid
< Debug: Setting new attribute file 'myOwnFilename.txt' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute file 'myOwnFilename.txt' into e3Detector 'e3Detector_B'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute file 'fileB.txt' into e3Detector 'e3Detector_B'
< Debug: Setting previous attribute file 'fileA.txt' into e3Detector 'e3Detector_A'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into detExit 'e3Detector_BdetExit1'
< Debug: Setting previous attribute selected '0' into detExit 'e3Detector_AdetExit1'
< Debug: Setting previous attribute selected '0' into detEntry 'e3Detector_BdetEntry0'
< Debug: Setting previous attribute selected '0' into detEntry 'e3Detector_AdetEntry0'
< Debug: Setting previous attribute selected '0' into e3Detector 'e3Detector_B'
< Debug: Setting previous attribute selected '0' into e3Detector 'e3Detector_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e3detector inspect_selection freq ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e3Detector id="e3Detector_A" pos="7.50,-2.00" freq="50.00" name="A" file="fileA.txt">
---
>     <e3Detector id="50" pos="7.50,-2.00" freq="100.00" name="A" file="fileA.txt">
12c12
<     <e3Detector id="e3Detector_B" pos="17.50,-2.00" freq="50.00" name="B" file="fileB.txt" timeThreshold="2.00" speedThreshold="3.39">
---
>     <e3Detector id="e3Detector_B" pos="17.50,-2.00" freq="120.00" name="B" file="fileB.txt" timeThreshold="2.00" speedThreshold="3.39">
---------- Differences in errors ----------
19,32c19,25
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute selected 'true' into e3Detector 'e3Detector_B'
< Debug: Setting new attribute selected 'true' into detEntry 'e3Detector_AdetEntry0'
< Debug: Setting new attribute selected 'true' into detEntry 'e3Detector_BdetEntry0'
< Debug: Setting new attribute selected 'true' into detExit 'e3Detector_AdetExit1'
< Debug: Setting new attribute selected 'true' into detExit 'e3Detector_BdetExit1'
< Debug: Value '%%%;:..&&%$%$' for attribute freq of e3Detector isn't valid
< Debug: Value '-30' for attribute freq of e3Detector isn't valid
< Debug: Setting new attribute freq '50' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute freq '50' into e3Detector 'e3Detector_B'
---
> Debug: Value '%%%;:..&&%$%$' for attribute id of e3Detector isn't valid
> Debug: Setting new attribute id '-30' into e3Detector 'e3Detector_A'
> Debug: Setting new attribute id '-30detEntry2' into detEntry 'e3Detector_AdetEntry0'
> Debug: Setting new attribute id '-30detExit2' into detExit 'e3Detector_AdetExit1'
> Debug: Setting new attribute id '50' into e3Detector '-30'
> Debug: Setting new attribute id '50detEntry2' into detEntry '-30detEntry2'
> Debug: Setting new attribute id '50detExit2' into detExit '-30detExit2'
35,36c28,30
< Debug: Setting previous attribute freq '120.00' into e3Detector 'e3Detector_B'
< Debug: Setting previous attribute freq '100.00' into e3Detector 'e3Detector_A'
---
> Debug: Setting previous attribute id '-30detExit2' into detExit '50detExit2'
> Debug: Setting previous attribute id '-30detEntry2' into detEntry '50detEntry2'
> Debug: Setting previous attribute id '-30' into e3Detector '50'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e3detector inspect_selection name ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e3Detector id="e3Detector_A" pos="7.50,-2.00" freq="100.00" name="customName" file="fileA.txt">
---
>     <e3Detector id="e3Detector_A" pos="7.50,-2.00" freq="100.00" name="A" file="fileA.txt">
12c12
<     <e3Detector id="e3Detector_B" pos="17.50,-2.00" freq="120.00" name="customName" file="fileB.txt" timeThreshold="2.00" speedThreshold="3.39">
---
>     <e3Detector id="e3Detector_B" pos="17.50,-2.00" freq="120.00" name="B" file="fileB.txt" timeThreshold="2.00" speedThreshold="3.39">
---------- Differences in errors ----------
19,31c19,21
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute selected 'true' into e3Detector 'e3Detector_B'
< Debug: Setting new attribute selected 'true' into detEntry 'e3Detector_AdetEntry0'
< Debug: Setting new attribute selected 'true' into detEntry 'e3Detector_BdetEntry0'
< Debug: Setting new attribute selected 'true' into detExit 'e3Detector_AdetExit1'
< Debug: Setting new attribute selected 'true' into detExit 'e3Detector_BdetExit1'
< Debug: Value '%%%;:..&&%$%$' for attribute name of e3Detector isn't valid
< Debug: Setting new attribute name 'customName' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute name 'customName' into e3Detector 'e3Detector_B'
---
> Debug: Value '%%%;:..&&%$%$' for attribute pos of e3Detector isn't valid
> Debug: Value 'customName' for attribute pos of e3Detector isn't valid
> Debug: Value 'customNamei' for attribute pos of e3Detector isn't valid
34,35c24,30
< Debug: Setting previous attribute name 'B' into e3Detector 'e3Detector_B'
< Debug: Setting previous attribute name 'A' into e3Detector 'e3Detector_A'
---
> Debug: Removing detExit 'e3Detector_BdetExit1' in GNEChange_Additional
> Debug: Removing detEntry 'e3Detector_BdetEntry0' in GNEChange_Additional
> Debug: Removing e3Detector 'e3Detector_B' in GNEChange_Additional
> Debug: Removing detExit 'e3Detector_AdetExit1' in GNEChange_Additional
> Debug: Removing detEntry 'e3Detector_AdetEntry0' in GNEChange_Additional
> Debug: Removing e3Detector 'e3Detector_A' in GNEChange_Additional
> Debug: Removed inspected element from Inspected ACs. 0 ACs remains.
37,47d31
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e3detector inspect_selection parameters ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
8,10c8,10
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>         <param key="keyA1" value="valueA1"/>
>         <param key="keyA2" value="valueA2"/>
>         <param key="keyA3" value="valueA3"/>
15,17c15,17
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>         <param key="keyB1" value="valueB1"/>
>         <param key="keyB2" value="valueB2"/>
>         <param key="keyB3" value="valueB3"/>
---------- Differences in errors ----------
19,42c19,28
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute selected 'true' into e3Detector 'e3Detector_B'
< Debug: Setting new attribute selected 'true' into detEntry 'e3Detector_AdetEntry0'
< Debug: Setting new attribute selected 'true' into detEntry 'e3Detector_BdetEntry0'
< Debug: Setting new attribute selected 'true' into detExit 'e3Detector_AdetExit1'
< Debug: Setting new attribute selected 'true' into detExit 'e3Detector_BdetExit1'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into e3Detector 'e3Detector_B'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into e3Detector 'e3Detector_B'
< Debug: Setting new attribute genericParameter '' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute genericParameter '' into e3Detector 'e3Detector_B'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into e3Detector 'e3Detector_B'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into e3Detector 'e3Detector_B'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into e3Detector 'e3Detector_B'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into e3Detector 'e3Detector_B'
---
> Debug: Value 'dummyGenericParameters' for attribute speedThreshold of e3Detector isn't valid
> Debug: Value 'key1|key2|key3' for attribute speedThreshold of e3Detector isn't valid
> Debug: Value 'key1=value1|key2=value2|key3=value3' for attribute speedThreshold of e3Detector isn't valid
> Debug: Value 'key1=|key2=|key3=' for attribute speedThreshold of e3Detector isn't valid
<truncated after showing first 30 lines>
---------- Differences in log ----------
1,3d0
< Warning: Invalid format of parameter (dummyGenericParameters)
< Warning: Invalid format of parameter (key1)
< Warning: Invalid format of parameter (keyInvalid.;%>%$$=value1)

TEST FAILED on ts-sim-winbuild-ba : additionalElements e3detector inspect_selection speedthreshold ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e3Detector id="e3Detector_A" pos="7.50,-2.00" freq="100.00" name="A" file="fileA.txt" speedThreshold="4.00">
---
>     <e3Detector id="e3Detector_A" pos="7.50,-2.00" freq="100.00" name="A" file="fileA.txt" vTypes="4">
12c12
<     <e3Detector id="e3Detector_B" pos="17.50,-2.00" freq="120.00" name="B" file="fileB.txt" timeThreshold="2.00" speedThreshold="4.00">
---
>     <e3Detector id="e3Detector_B" pos="17.50,-2.00" freq="120.00" name="B" file="fileB.txt" timeThreshold="2.00" speedThreshold="3.39">
---------- Differences in errors ----------
19,32c19,21
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute selected 'true' into e3Detector 'e3Detector_B'
< Debug: Setting new attribute selected 'true' into detEntry 'e3Detector_AdetEntry0'
< Debug: Setting new attribute selected 'true' into detEntry 'e3Detector_BdetEntry0'
< Debug: Setting new attribute selected 'true' into detExit 'e3Detector_AdetExit1'
< Debug: Setting new attribute selected 'true' into detExit 'e3Detector_BdetExit1'
< Debug: Value 'dummySpeedTreshold' for attribute speedThreshold of e3Detector isn't valid
< Debug: Value '-3' for attribute speedThreshold of e3Detector isn't valid
< Debug: Setting new attribute speedThreshold '4' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute speedThreshold '4' into e3Detector 'e3Detector_B'
---
> Debug: Setting new attribute vTypes 'dummySpeedTreshold' into e3Detector 'e3Detector_A'
> Debug: Setting new attribute vTypes '-3' into e3Detector 'e3Detector_A'
> Debug: Setting new attribute vTypes '4' into e3Detector 'e3Detector_A'
35,36c24
< Debug: Setting previous attribute speedThreshold '3.39' into e3Detector 'e3Detector_B'
< Debug: Setting previous attribute speedThreshold '1.39' into e3Detector 'e3Detector_A'
---
> Debug: Setting previous attribute vTypes '-3' into e3Detector 'e3Detector_A'
39,48c27,30
< Debug: Setting previous attribute selected '0' into detExit 'e3Detector_BdetExit1'
< Debug: Setting previous attribute selected '0' into detExit 'e3Detector_AdetExit1'
< Debug: Setting previous attribute selected '0' into detEntry 'e3Detector_BdetEntry0'
< Debug: Setting previous attribute selected '0' into detEntry 'e3Detector_AdetEntry0'
< Debug: Setting previous attribute selected '0' into e3Detector 'e3Detector_B'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e3detector inspect_selection timethreshold ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e3Detector id="e3Detector_A" pos="7.50,-2.00" freq="100.00" name="A" file="fileA.txt" timeThreshold="11.30">
---
>     <e3Detector id="e3Detector_A" pos="7.50,-2.00" freq="100.00" name="A" file="11.3">
12c12
<     <e3Detector id="e3Detector_B" pos="17.50,-2.00" freq="120.00" name="B" file="fileB.txt" timeThreshold="11.30" speedThreshold="3.39">
---
>     <e3Detector id="e3Detector_B" pos="17.50,-2.00" freq="120.00" name="B" file="fileB.txt" timeThreshold="2.00" speedThreshold="3.39">
---------- Differences in errors ----------
19,32c19,21
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute selected 'true' into e3Detector 'e3Detector_B'
< Debug: Setting new attribute selected 'true' into detEntry 'e3Detector_AdetEntry0'
< Debug: Setting new attribute selected 'true' into detEntry 'e3Detector_BdetEntry0'
< Debug: Setting new attribute selected 'true' into detExit 'e3Detector_AdetExit1'
< Debug: Setting new attribute selected 'true' into detExit 'e3Detector_BdetExit1'
< Debug: Value 'dummySpeedTreshold' for attribute timeThreshold of e3Detector isn't valid
< Debug: Value '-5' for attribute timeThreshold of e3Detector isn't valid
< Debug: Setting new attribute timeThreshold '11.3' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute timeThreshold '11.3' into e3Detector 'e3Detector_B'
---
> Debug: Setting new attribute file 'dummySpeedTreshold' into e3Detector 'e3Detector_A'
> Debug: Setting new attribute file '-5' into e3Detector 'e3Detector_A'
> Debug: Setting new attribute file '11.3' into e3Detector 'e3Detector_A'
35,36c24
< Debug: Setting previous attribute timeThreshold '2.00' into e3Detector 'e3Detector_B'
< Debug: Setting previous attribute timeThreshold '1.00' into e3Detector 'e3Detector_A'
---
> Debug: Setting previous attribute file '-5' into e3Detector 'e3Detector_A'
39,48c27,30
< Debug: Setting previous attribute selected '0' into detExit 'e3Detector_BdetExit1'
< Debug: Setting previous attribute selected '0' into detExit 'e3Detector_AdetExit1'
< Debug: Setting previous attribute selected '0' into detEntry 'e3Detector_BdetEntry0'
< Debug: Setting previous attribute selected '0' into detEntry 'e3Detector_AdetEntry0'
< Debug: Setting previous attribute selected '0' into e3Detector 'e3Detector_B'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e3detector inspect_selection vtypes ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e3Detector id="e3Detector_A" pos="7.50,-2.00" freq="100.00" name="A" file="fileA.txt" vTypes="Type1 Type2 Type3">
---
>     <e3Detector id="e3Detector_A" pos="7.50,-2.00" freq="100.00" name="Type1 Type2 Type3" file="fileA.txt">
12c12
<     <e3Detector id="e3Detector_B" pos="17.50,-2.00" freq="120.00" name="B" file="fileB.txt" vTypes="Type1 Type2 Type3" timeThreshold="2.00" speedThreshold="3.39">
---
>     <e3Detector id="e3Detector_B" pos="17.50,-2.00" freq="120.00" name="B" file="fileB.txt" timeThreshold="2.00" speedThreshold="3.39">
---------- Differences in errors ----------
19,31c19,20
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute selected 'true' into e3Detector 'e3Detector_B'
< Debug: Setting new attribute selected 'true' into detEntry 'e3Detector_AdetEntry0'
< Debug: Setting new attribute selected 'true' into detEntry 'e3Detector_BdetEntry0'
< Debug: Setting new attribute selected 'true' into detExit 'e3Detector_AdetExit1'
< Debug: Setting new attribute selected 'true' into detExit 'e3Detector_BdetExit1'
< Debug: Value 'Typ**e%%%%%1 T;;yp$2 Type3' for attribute vTypes of e3Detector isn't valid
< Debug: Setting new attribute vTypes 'Type1 Type2 Type3' into e3Detector 'e3Detector_A'
< Debug: Setting new attribute vTypes 'Type1 Type2 Type3' into e3Detector 'e3Detector_B'
---
> Debug: Value 'Typ**e%%%%%1 T;;yp$2 Type3' for attribute name of e3Detector isn't valid
> Debug: Setting new attribute name 'Type1 Type2 Type3' into e3Detector 'e3Detector_A'
34,47c23
< Debug: Setting previous attribute vTypes '' into e3Detector 'e3Detector_B'
< Debug: Setting previous attribute vTypes '' into e3Detector 'e3Detector_A'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into detExit 'e3Detector_BdetExit1'
< Debug: Setting previous attribute selected '0' into detExit 'e3Detector_AdetExit1'
< Debug: Setting previous attribute selected '0' into detEntry 'e3Detector_BdetEntry0'
< Debug: Setting previous attribute selected '0' into detEntry 'e3Detector_AdetEntry0'
< Debug: Setting previous attribute selected '0' into e3Detector 'e3Detector_B'
< Debug: Setting previous attribute selected '0' into e3Detector 'e3Detector_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e3detector lock_unlock ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e3Detector id="e3Detector_0" pos="27.00,5.00" freq="900.00" file="e3Detector_0.xml">
---
>     <e3Detector id="e3Detector_0" pos="22.00,0.00" freq="900.00" file="e3Detector_0.xml">
---------- Differences in errors ----------
15,18c15,21
< Debug: Setting new attribute pos '22.00,5.00' into e3Detector 'e3Detector_0'
< Debug: Setting new attribute blockMovement 'true' into e3Detector 'e3Detector_0'
< Debug: Setting new attribute blockMovement 'false' into e3Detector 'e3Detector_0'
< Debug: Setting new attribute pos '27.00,5.00' into e3Detector 'e3Detector_0'
---
> Debug: Setting new attribute shape '17.64,7.14' into edge 'gneE0'
> Debug: net has to be saved
> Debug: Current saving Status: net unsaved, additionals unsaved, demand elements saved, data sets saved
> Error: Shape of a(n) user-supplied shape is broken: the position is neither x,y nor x,y,z.
> Debug: Value ' m' for attribute shape of edge isn't valid
> Error: Shape of a(n) user-supplied shape is broken: the position is neither x,y nor x,y,z.
> Debug: Value ' m' for attribute shape of edge isn't valid
21,30c24
< Debug: Setting previous attribute pos '22.00,5.00' into e3Detector 'e3Detector_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute blockMovement '1' into e3Detector 'e3Detector_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute blockMovement '0' into e3Detector 'e3Detector_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '22.00,0.00' into e3Detector 'e3Detector_0'
---
> Debug: Setting previous attribute shape '' into edge 'gneE0'
40a35,37
> Debug: Keys Ctrl+Z (Undo) pressed
> Debug: Keys Ctrl+Z (Undo) pressed
> Debug: Keys Ctrl+Z (Undo) pressed
<truncated after showing first 30 lines>
---------- Differences in guisettingsoutput ----------
2c2
<     <viewport zoom="296.00" x="25.00" y="0.00" angle="0.00"/>
---
>     <viewport zoom="296.00" x="12.46" y="0.00" angle="0.00"/>
---------- Differences in log ----------
0a1,2
> Error: Shape of a(n) user-supplied shape is broken: the position is neither x,y nor x,y,z.
> Error: Shape of a(n) user-supplied shape is broken: the position is neither x,y nor x,y,z.
---------- Differences in net ----------
6c6
<     <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>
---
>     <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,7.14" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>
9c9
<         <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
---
>         <lane id=":gneJ0_0_0" index="0" speed="4.88" length="8.81" shape="16.43,1.60 13.32,1.79 12.18,2.37 13.02,3.33 15.83,4.68"/>
12c12
<         <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
---
>         <lane id=":gneJ1_0_0" index="0" speed="5.92" length="14.86" shape="49.48,-1.52 44.20,-0.16 42.49,0.82 44.37,1.40 49.83,1.60"/>
15,16c15,16
<     <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1">
<         <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
---
>     <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1" shape="0.00,0.00 17.64,7.14 50.00,0.00">
>         <lane id="gneE0_0" index="0" speed="13.89" length="34.57" shape="15.83,4.68 17.78,5.47 49.48,-1.52"/>
19c19
<         <lane id="gneE1_0" index="0" speed="13.89" length="50.00" shape="50.00,1.60 0.00,1.60"/>
---
>         <lane id="gneE1_0" index="0" speed="13.89" length="33.39" shape="49.83,1.60 16.43,1.60"/>
31c31
<     <junction id="gneJ0" type="traffic_light" x="0.00" y="0.00" incLanes="gneE1_0" intLanes=":gneJ0_0_0" shape="0.00,0.00 0.00,3.20 0.00,0.00">
---
>     <junction id="gneJ0" type="traffic_light" x="0.00" y="0.00" incLanes="gneE1_0" intLanes=":gneJ0_0_0" shape="15.23,6.17 16.43,3.20 16.43,0.00 11.84,0.17 9.00,0.69 7.92,1.54 8.60,2.74 11.04,4.28">
34c34
<     <junction id="gneJ1" type="traffic_light" x="50.00" y="0.00" incLanes="gneE0_0" intLanes=":gneJ1_0_0" shape="50.00,0.00 50.00,-3.20 50.00,0.00">
---
>     <junction id="gneJ1" type="traffic_light" x="50.00" y="0.00" incLanes="gneE0_0" intLanes=":gneJ1_0_0" shape="50.00,0.00 50.00,3.20 49.31,-3.12">
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements e3detector move ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <e3Detector id="e3Detector_0" pos="30.00,-1.00" freq="900.00" file="e3Detector_0.xml">
---
>     <e3Detector id="e3Detector_0" pos="22.00,0.00" freq="900.00" file="e3Detector_0.xml">
---------- Differences in errors ----------
15,18c15,19
< Debug: Setting new attribute pos '22.00,5.00' into e3Detector 'e3Detector_0'
< Debug: Setting new attribute pos '22.00,-1.00' into e3Detector 'e3Detector_0'
< Debug: Setting new attribute pos '16.00,-1.00' into e3Detector 'e3Detector_0'
< Debug: Setting new attribute pos '30.00,-1.00' into e3Detector 'e3Detector_0'
---
> Debug: Setting new attribute shape '17.64,7.14' into edge 'gneE0'
> Debug: net has to be saved
> Debug: Current saving Status: net unsaved, additionals unsaved, demand elements saved, data sets saved
> Debug: Setting new attribute shape '17.64,-1.79' into edge 'gneE0'
> Debug: Setting new attribute shape '29.43,-1.79' into edge 'gneE0'
21c22
< Debug: Setting previous attribute pos '16.00,-1.00' into e3Detector 'e3Detector_0'
---
> Debug: Setting previous attribute shape '17.64,-1.79' into edge 'gneE0'
24c25
< Debug: Setting previous attribute pos '22.00,-1.00' into e3Detector 'e3Detector_0'
---
> Debug: Setting previous attribute shape '17.64,7.14' into edge 'gneE0'
27,30c28
< Debug: Setting previous attribute pos '22.00,5.00' into e3Detector 'e3Detector_0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '22.00,0.00' into e3Detector 'e3Detector_0'
---
> Debug: Setting previous attribute shape '' into edge 'gneE0'
39a38
> Debug: Keys Ctrl+Z (Undo) pressed
51c50
< Debug: Setting new attribute pos '22.00,5.00' into e3Detector 'e3Detector_0'
<truncated after showing first 30 lines>
---------- Differences in net ----------
6c6
<     <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>
---
>     <location netOffset="25.00,0.00" convBoundary="0.00,-1.79,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>
9c9
<         <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
---
>         <lane id=":gneJ0_0_0" index="0" speed="3.68" length="4.67" shape="0.00,1.60 -1.22,0.84 -1.65,0.05 -1.27,-0.76 -0.10,-1.60"/>
12c12
<         <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
---
>         <lane id=":gneJ1_0_0" index="0" speed="3.69" length="4.67" shape="50.14,-1.59 51.30,-0.74 51.67,0.07 51.23,0.85 50.00,1.60"/>
15,16c15,16
<     <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1">
<         <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
---
>     <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1" shape="0.00,0.00 29.43,-1.79 50.00,0.00">
>         <lane id="gneE0_0" index="0" speed="13.89" length="50.37" shape="-0.10,-1.60 29.45,-3.39 50.14,-1.59"/>
31c31
<     <junction id="gneJ0" type="traffic_light" x="0.00" y="0.00" incLanes="gneE1_0" intLanes=":gneJ0_0_0" shape="0.00,0.00 0.00,3.20 0.00,0.00">
---
>     <junction id="gneJ0" type="traffic_light" x="0.00" y="0.00" incLanes="gneE1_0" intLanes=":gneJ0_0_0" shape="-0.00,0.00 -0.19,-3.19 0.00,3.20">
34c34
<     <junction id="gneJ1" type="traffic_light" x="50.00" y="0.00" incLanes="gneE0_0" intLanes=":gneJ1_0_0" shape="50.00,0.00 50.00,-3.20 50.00,0.00">
---
>     <junction id="gneJ1" type="traffic_light" x="50.00" y="0.00" incLanes="gneE0_0" intLanes=":gneJ1_0_0" shape="50.00,0.00 50.00,3.20 50.28,-3.19">

TEST FAILED on ts-sim-winbuild-ba : additionalElements lanecalibrator inspect_selection freq ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
8c8
<     <calibrator id="calibratorA" lane="gneE2_0" pos="20.00" freq="12.50" name="NameA" routeProbe="RouteProbeA" output="fileA.txt">
---
>     <calibrator id="calibratorA" lane="gneE2_0" pos="20.00" freq="30.00" name="NameA" routeProbe="RouteProbeA" output="fileA.txt">
13c13
<     <calibrator id="calibratorB" lane="gneE3_0" pos="30.00" freq="12.50" name="NameB" routeProbe="RouteProbeB" output="fileB.txt">
---
>     <calibrator id="calibratorB" lane="gneE3_0" pos="30.00" freq="40.00" name="NameB" routeProbe="RouteProbeB" output="fileB.txt">
---------- Differences in errors ----------
18,53c18,21
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into junction 'gneJ3'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into laneCalibrator 'calibratorA'
< Debug: Setting new attribute selected 'true' into laneCalibrator 'calibratorB'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeA'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeB'
< Debug: Setting new attribute selected 'true' into routeProbe 'customRouteProbeName'
< Debug: Value 'dummyFreq' for attribute freq of laneCalibrator isn't valid
< Debug: Value '-12' for attribute freq of laneCalibrator isn't valid
< Debug: Setting new attribute freq '12.5' into laneCalibrator 'calibratorA'
< Debug: Setting new attribute freq '12.5' into laneCalibrator 'calibratorB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute freq '40.00' into laneCalibrator 'calibratorB'
< Debug: Setting previous attribute freq '30.00' into laneCalibrator 'calibratorA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into routeProbe 'customRouteProbeName'
< Debug: Setting previous attribute selected '0' into routeProbe 'RouteProbeB'
< Debug: Setting previous attribute selected '0' into routeProbe 'RouteProbeA'
< Debug: Setting previous attribute selected '0' into laneCalibrator 'calibratorB'
< Debug: Setting previous attribute selected '0' into laneCalibrator 'calibratorA'
< Debug: Setting previous attribute selected '0' into edge 'gneE2'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements lanecalibrator inspect_selection name ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
8c8
<     <calibrator id="calibratorA" lane="gneE2_0" pos="20.00" freq="30.00" name="customName" routeProbe="RouteProbeA" output="fileA.txt">
---
>     <calibrator id="calibratorA" lane="gneE2_0" pos="20.00" freq="30.00" name="NameA" routeProbe="RouteProbeA" output="fileA.txt">
13c13
<     <calibrator id="calibratorB" lane="gneE3_0" pos="30.00" freq="40.00" name="customName" routeProbe="RouteProbeB" output="fileB.txt">
---
>     <calibrator id="calibratorB" lane="gneE3_0" pos="30.00" freq="40.00" name="NameB" routeProbe="RouteProbeB" output="fileB.txt">
---------- Differences in errors ----------
18,52c18,20
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into junction 'gneJ3'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into laneCalibrator 'calibratorA'
< Debug: Setting new attribute selected 'true' into laneCalibrator 'calibratorB'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeA'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeB'
< Debug: Setting new attribute selected 'true' into routeProbe 'customRouteProbeName'
< Debug: Value '///' for attribute name of laneCalibrator isn't valid
< Debug: Setting new attribute name 'customName' into laneCalibrator 'calibratorA'
< Debug: Setting new attribute name 'customName' into laneCalibrator 'calibratorB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute name 'NameB' into laneCalibrator 'calibratorB'
< Debug: Setting previous attribute name 'NameA' into laneCalibrator 'calibratorA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into routeProbe 'customRouteProbeName'
< Debug: Setting previous attribute selected '0' into routeProbe 'RouteProbeB'
< Debug: Setting previous attribute selected '0' into routeProbe 'RouteProbeA'
< Debug: Setting previous attribute selected '0' into laneCalibrator 'calibratorB'
< Debug: Setting previous attribute selected '0' into laneCalibrator 'calibratorA'
< Debug: Setting previous attribute selected '0' into edge 'gneE2'
< Debug: Setting previous attribute selected '0' into junction 'gneJ3'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements lanecalibrator inspect_selection output ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
8c8
<     <calibrator id="calibratorA" lane="gneE2_0" pos="20.00" freq="30.00" name="NameA" routeProbe="RouteProbeA" output="myOwnFilename">
---
>     <calibrator id="calibratorA" lane="gneE2_0" pos="20.00" freq="30.00" name="NameA" routeProbe="RouteProbeA" output="fileA.txt">
13c13
<     <calibrator id="calibratorB" lane="gneE3_0" pos="30.00" freq="40.00" name="NameB" routeProbe="RouteProbeB" output="myOwnFilename">
---
>     <calibrator id="calibratorB" lane="gneE3_0" pos="30.00" freq="40.00" name="myOwnFilename" routeProbe="RouteProbeB" output="fileB.txt">
---------- Differences in errors ----------
18,33c18,19
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into junction 'gneJ3'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into laneCalibrator 'calibratorA'
< Debug: Setting new attribute selected 'true' into laneCalibrator 'calibratorB'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeA'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeB'
< Debug: Setting new attribute selected 'true' into routeProbe 'customRouteProbeName'
< Debug: Value '///;;' for attribute output of laneCalibrator isn't valid
< Debug: Setting new attribute output 'myOwnFilename' into laneCalibrator 'calibratorA'
< Debug: Setting new attribute output 'myOwnFilename' into laneCalibrator 'calibratorB'
---
> Debug: Value '///;;' for attribute name of laneCalibrator isn't valid
> Debug: Setting new attribute name 'myOwnFilename' into laneCalibrator 'calibratorB'
36,52c22
< Debug: Setting previous attribute output 'fileB.txt' into laneCalibrator 'calibratorB'
< Debug: Setting previous attribute output 'fileA.txt' into laneCalibrator 'calibratorA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into routeProbe 'customRouteProbeName'
< Debug: Setting previous attribute selected '0' into routeProbe 'RouteProbeB'
< Debug: Setting previous attribute selected '0' into routeProbe 'RouteProbeA'
< Debug: Setting previous attribute selected '0' into laneCalibrator 'calibratorB'
< Debug: Setting previous attribute selected '0' into laneCalibrator 'calibratorA'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements lanecalibrator inspect_selection parameters ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
9,11c9,11
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>         <param key="KeyA1" value="valueA1"/>
>         <param key="KeyA2" value="valueA3"/>
>         <param key="KeyA3" value="valueA2"/>
13,16c13,16
<     <calibrator id="calibratorB" lane="gneE3_0" pos="30.00" freq="40.00" name="NameB" routeProbe="RouteProbeB" output="fileB.txt">
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>     <calibrator id="calibratorB" lane="gneE3_0" pos="30.00" freq="40.00" name="NameB" routeProbe="RouteProbeB">
>         <param key="KeyB1" value="valueB1"/>
>         <param key="KeyB2" value="valueB3"/>
>         <param key="KeyB3" value="valueB2"/>
---------- Differences in errors ----------
18,44c18,28
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into junction 'gneJ3'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into laneCalibrator 'calibratorA'
< Debug: Setting new attribute selected 'true' into laneCalibrator 'calibratorB'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeA'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeB'
< Debug: Setting new attribute selected 'true' into routeProbe 'customRouteProbeName'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into laneCalibrator 'calibratorA'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into laneCalibrator 'calibratorB'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into laneCalibrator 'calibratorA'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into laneCalibrator 'calibratorB'
< Debug: Setting new attribute genericParameter '' into laneCalibrator 'calibratorA'
< Debug: Setting new attribute genericParameter '' into laneCalibrator 'calibratorB'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into laneCalibrator 'calibratorA'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into laneCalibrator 'calibratorB'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into laneCalibrator 'calibratorA'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into laneCalibrator 'calibratorB'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into laneCalibrator 'calibratorA'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into laneCalibrator 'calibratorB'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into laneCalibrator 'calibratorA'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into laneCalibrator 'calibratorB'
---
> Debug: Setting new attribute output 'dummyGenericParameters' into laneCalibrator 'calibratorB'
<truncated after showing first 30 lines>
---------- Differences in log ----------
1,3d0
< Warning: Invalid format of parameter (dummyGenericParameters)
< Warning: Invalid format of parameter (key1)
< Warning: Invalid format of parameter (keyInvalid.;%>%$$=value1)

TEST FAILED on ts-sim-winbuild-ba : additionalElements lanecalibrator inspect_selection pos ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
8,13c8
<     <calibrator id="calibratorA" lane="gneE2_0" pos="10.00" freq="30.00" name="NameA" routeProbe="RouteProbeA" output="fileA.txt">
<         <param key="KeyA1" value="valueA1"/>
<         <param key="KeyA2" value="valueA3"/>
<         <param key="KeyA3" value="valueA2"/>
<     </calibrator>
<     <calibrator id="calibratorB" lane="gneE3_0" pos="10.00" freq="40.00" name="NameB" routeProbe="RouteProbeB" output="fileB.txt">
---
>     <calibrator id="10" lane="gneE3_0" pos="30.00" freq="40.00" name="NameB" routeProbe="RouteProbeB" output="fileB.txt">
16a12,16
>     </calibrator>
>     <calibrator id="calibratorA" lane="gneE2_0" pos="20.00" freq="30.00" name="NameA" routeProbe="RouteProbeA" output="fileA.txt">
>         <param key="KeyA1" value="valueA1"/>
>         <param key="KeyA2" value="valueA3"/>
>         <param key="KeyA3" value="valueA2"/>
---------- Differences in errors ----------
27,44c27,30
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into junction 'gneJ3'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into laneCalibrator 'calibratorA'
< Debug: Setting new attribute selected 'true' into laneCalibrator 'calibratorB'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeA'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeB'
< Debug: Setting new attribute selected 'true' into routeProbe 'customRouteProbeName'
< Debug: Value 'dummyPos' for attribute pos of laneCalibrator isn't valid
< Debug: Value '-12' for attribute pos of laneCalibrator isn't valid
< Debug: Value '5000' for attribute pos of laneCalibrator isn't valid
< Debug: Setting new attribute pos '10' into laneCalibrator 'calibratorA'
< Debug: Setting new attribute pos '10' into laneCalibrator 'calibratorB'
---
> Debug: Setting new attribute id 'dummyPos' into laneCalibrator 'calibratorB'
> Debug: Setting new attribute id '-12' into laneCalibrator 'dummyPos'
> Debug: Setting new attribute id '5000' into laneCalibrator '-12'
> Debug: Setting new attribute id '10' into laneCalibrator '5000'
47,48c33
< Debug: Setting previous attribute pos '30.00' into laneCalibrator 'calibratorB'
< Debug: Setting previous attribute pos '20.00' into laneCalibrator 'calibratorA'
---
> Debug: Setting previous attribute id '5000' into laneCalibrator '10'
51,63c36
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements lanecalibrator inspect_selection routeprobe ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
8c8
<     <calibrator id="calibratorA" lane="gneE2_0" pos="20.00" freq="30.00" name="NameA" routeProbe="customRouteProbeName" output="fileA.txt">
---
>     <calibrator id="calibratorA" lane="gneE2_0" pos="20.00" freq="30.00" name="NameA" routeProbe="RouteProbeA" output="fileA.txt">
13c13
<     <calibrator id="calibratorB" lane="gneE3_0" pos="30.00" freq="40.00" name="NameB" routeProbe="customRouteProbeName" output="fileB.txt">
---
>     <calibrator id="calibratorB" lane="gneE3_0" pos="30.00" freq="40.00" name="NameB" routeProbe="RouteProbeB" output="fileB.txt">
---------- Differences in errors ----------
18,52c18,20
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into junction 'gneJ3'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into laneCalibrator 'calibratorA'
< Debug: Setting new attribute selected 'true' into laneCalibrator 'calibratorB'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeA'
< Debug: Setting new attribute selected 'true' into routeProbe 'RouteProbeB'
< Debug: Setting new attribute selected 'true' into routeProbe 'customRouteProbeName'
< Debug: Value '///;;' for attribute routeProbe of laneCalibrator isn't valid
< Debug: Setting new attribute routeProbe 'customRouteProbeName' into laneCalibrator 'calibratorA'
< Debug: Setting new attribute routeProbe 'customRouteProbeName' into laneCalibrator 'calibratorB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute routeProbe 'RouteProbeB' into laneCalibrator 'calibratorB'
< Debug: Setting previous attribute routeProbe 'RouteProbeA' into laneCalibrator 'calibratorA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into routeProbe 'customRouteProbeName'
< Debug: Setting previous attribute selected '0' into routeProbe 'RouteProbeB'
< Debug: Setting previous attribute selected '0' into routeProbe 'RouteProbeA'
< Debug: Setting previous attribute selected '0' into laneCalibrator 'calibratorB'
< Debug: Setting previous attribute selected '0' into laneCalibrator 'calibratorA'
< Debug: Setting previous attribute selected '0' into edge 'gneE2'
< Debug: Setting previous attribute selected '0' into junction 'gneJ3'
<truncated after showing first 30 lines>

2 TESTS FAILED on ts-sim-winbuild-ba :

---------- Differences in additionals ----------
5,8c5,8
<     <parkingArea id="parkingAreaA" lane="gneE0_0" startPos="11.90" endPos="12.00"/>
<     <parkingArea id="parkingAreaB" lane="gneE0_0" startPos="38.00" endPos="50.00"/>
<     <parkingArea id="parkingAreaC" lane="gneE1_0" startPos="12.00" endPos="48.00"/>
<     <parkingArea id="parkingAreaD" lane="gneE1_0" startPos="37.90" endPos="38.00"/>
---
>     <parkingArea id="parkingAreaA" lane="gneE0_0" startPos="11.90" endPos="12.00" friendlyPos="1"/>
>     <parkingArea id="parkingAreaB" lane="gneE0_0" startPos="38.00" endPos="50.00" friendlyPos="1"/>
>     <parkingArea id="parkingAreaC" lane="gneE1_0" startPos="12.00" endPos="48.00" friendlyPos="1"/>
>     <parkingArea id="parkingAreaD" lane="gneE1_0" startPos="37.90" endPos="38.00" friendlyPos="1"/>
---------- Differences in errors ----------
28,48c28,29
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaB'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaC'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaD'
< Debug: Setting new attribute friendlyPos 'false' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute friendlyPos 'false' into parkingArea 'parkingAreaB'
< Debug: Setting new attribute friendlyPos 'false' into parkingArea 'parkingAreaC'
< Debug: Setting new attribute friendlyPos 'false' into parkingArea 'parkingAreaD'
< Debug: Setting new attribute selected 'false' into junction 'gneJ0'
< Debug: Setting new attribute selected 'false' into edge 'gneE1'
< Debug: Setting new attribute selected 'false' into junction 'gneJ1'
< Debug: Setting new attribute selected 'false' into edge 'gneE0'
< Debug: Setting new attribute selected 'false' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute selected 'false' into parkingArea 'parkingAreaB'
< Debug: Setting new attribute selected 'false' into parkingArea 'parkingAreaC'
< Debug: Setting new attribute selected 'false' into parkingArea 'parkingAreaD'
< Debug: Additionals saved after dialog
---
> Debug: Value ' s' for attribute endPos of parkingArea isn't valid
> Debug: Additionals saved
additionalElements parkingarea fix fix_positions ( Last six runs Aug2020 Jul2020 )
additionalElements parkingarea fix save_invalids ( Last six runs Aug2020 Jul2020 )

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingarea fix friendlypos ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
6,8c6,8
<     <parkingArea id="parkingAreaB" lane="gneE0_0" startPos="38.00" endPos="50.00"/>
<     <parkingArea id="parkingAreaC" lane="gneE1_0" startPos="12.00" endPos="48.00"/>
<     <parkingArea id="parkingAreaD" lane="gneE1_0" startPos="37.90" endPos="38.00"/>
---
>     <parkingArea id="parkingAreaB" lane="gneE0_0" startPos="38.00" endPos="50.00" friendlyPos="1"/>
>     <parkingArea id="parkingAreaC" lane="gneE1_0" startPos="12.00" endPos="48.00" friendlyPos="1"/>
>     <parkingArea id="parkingAreaD" lane="gneE1_0" startPos="37.90" endPos="38.00" friendlyPos="1"/>
---------- Differences in errors ----------
28,49c28,29
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaB'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaC'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaD'
< Debug: Setting new attribute friendlyPos 'false' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute friendlyPos 'false' into parkingArea 'parkingAreaB'
< Debug: Setting new attribute friendlyPos 'false' into parkingArea 'parkingAreaC'
< Debug: Setting new attribute friendlyPos 'false' into parkingArea 'parkingAreaD'
< Debug: Setting new attribute selected 'false' into junction 'gneJ0'
< Debug: Setting new attribute selected 'false' into edge 'gneE1'
< Debug: Setting new attribute selected 'false' into junction 'gneJ1'
< Debug: Setting new attribute selected 'false' into edge 'gneE0'
< Debug: Setting new attribute selected 'false' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute selected 'false' into parkingArea 'parkingAreaB'
< Debug: Setting new attribute selected 'false' into parkingArea 'parkingAreaC'
< Debug: Setting new attribute selected 'false' into parkingArea 'parkingAreaD'
< Debug: Setting new attribute friendlyPos 'true' into parkingArea 'parkingAreaA'
< Debug: Additionals saved after dialog
---
> Debug: Value ' s' for attribute endPos of parkingArea isn't valid
> Debug: Additionals saved

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingarea fix select_invalids ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5,7c5,8
<     <parkingArea id="parkingAreaB" lane="gneE0_0" startPos="38.00" endPos="50.00"/>
<     <parkingArea id="parkingAreaC" lane="gneE1_0" startPos="12.00" endPos="48.00"/>
<     <parkingArea id="parkingAreaD" lane="gneE1_0" startPos="37.90" endPos="38.00"/>
---
>     <parkingArea id="parkingAreaA" lane="gneE0_0" startPos="11.90" endPos="12.00" friendlyPos="1"/>
>     <parkingArea id="parkingAreaB" lane="gneE0_0" startPos="38.00" endPos="50.00" friendlyPos="1"/>
>     <parkingArea id="parkingAreaC" lane="gneE1_0" startPos="12.00" endPos="48.00" friendlyPos="1"/>
>     <parkingArea id="parkingAreaD" lane="gneE1_0" startPos="37.90" endPos="38.00" friendlyPos="1"/>
---------- Differences in errors ----------
28,53c28
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaB'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaC'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaD'
< Debug: Setting new attribute friendlyPos 'false' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute friendlyPos 'false' into parkingArea 'parkingAreaB'
< Debug: Setting new attribute friendlyPos 'false' into parkingArea 'parkingAreaC'
< Debug: Setting new attribute friendlyPos 'false' into parkingArea 'parkingAreaD'
< Debug: Setting new attribute selected 'false' into junction 'gneJ0'
< Debug: Setting new attribute selected 'false' into edge 'gneE1'
< Debug: Setting new attribute selected 'false' into junction 'gneJ1'
< Debug: Setting new attribute selected 'false' into edge 'gneE0'
< Debug: Setting new attribute selected 'false' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute selected 'false' into parkingArea 'parkingAreaB'
< Debug: Setting new attribute selected 'false' into parkingArea 'parkingAreaC'
< Debug: Setting new attribute selected 'false' into parkingArea 'parkingAreaD'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaA'
< Debug: Additionals saving aborted
< Debug: Key DEL (delete) pressed
< Debug: Removing parkingArea 'parkingAreaA' in GNEChange_Additional
< Debug: Removed inspected element from Inspected ACs. 3 ACs remains.
< GLDebug: 	Removed object parkingArea:parkingAreaA from SUMORTree with boundary 7.70,-10.60,16.20,-2.20
---
> Debug: Value ' s' for attribute endPos of parkingArea isn't valid
68a44,45
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingarea inspect_selection angle ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
15,96c15
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaB'
< Debug: Value 'dummyAngle' for attribute angle of parkingArea isn't valid
< Debug: Setting new attribute angle '-6.00' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute angle '-6.00' into parkingArea 'parkingAreaB'
< Debug: Setting new attribute angle '140.00' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute angle '140.00' into parkingArea 'parkingAreaB'
< Debug: Setting new attribute angle '32.50' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute angle '32.50' into parkingArea 'parkingAreaB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute angle '140.00' into parkingArea 'parkingAreaB'
< Debug: Setting previous attribute angle '140.00' into parkingArea 'parkingAreaA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute angle '-6.00' into parkingArea 'parkingAreaB'
< Debug: Setting previous attribute angle '-6.00' into parkingArea 'parkingAreaA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute angle '30.00' into parkingArea 'parkingAreaB'
< Debug: Setting previous attribute angle '0.00' into parkingArea 'parkingAreaA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into parkingArea 'parkingAreaB'
< Debug: Setting previous attribute selected '0' into parkingArea 'parkingAreaA'
<truncated after showing first 30 lines>
---------- Differences in output ----------
11c11
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <parkingArea id="parkingAreaA" lane="gneE0_0" startPos="5" endPos="10" name="parkingArea1" onRoad="1" friendlyPos="1" width="5.00" length="7.00" angle="32.50">
        <param key="KeyA1" value="valueA1"/>
        <param key="KeyA2" value="valueA2"/>
        <param key="KeyA3" value="valueA3"/>
    </parkingArea>
    <parkingArea id="parkingAreaB" lane="gneE0_0" startPos="15" endPos="20" name="parkingArea2" roadsideCapacity="10" width="6.00" length="8.00" angle="32.50">
        <param key="KeyB1" value="valueB1"/>
        <param key="KeyB2" value="valueB2"/>
        <param key="KeyB3" value="valueB3"/>
    </parkingArea>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>

    <edge id=":gneJ0_0" function="internal">
        <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
    </edge>
    <edge id=":gneJ1_0" function="internal">
        <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
    </edge>

    <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1">
        <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
    </edge>
    <edge id="gneE1" from="gneJ1" to="gneJ0" priority="1">
        <lane id="gneE1_0" index="0" speed="13.89" length="50.00" shape="50.00,1.60 0.00,1.60"/>
    </edge>

    <tlLogic id="gneJ0" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>
    <tlLogic id="gneJ1" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>

<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingarea inspect_selection block_move ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
15,67c15
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into parkingArea 'parkingAreaB'
< Debug: Setting previous attribute selected '0' into parkingArea 'parkingAreaA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Removing parkingArea 'parkingAreaB' in GNEChange_Additional
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
< Debug: Removing parkingArea 'parkingAreaA' in GNEChange_Additional
< Debug: Removed inspected element from Inspected ACs. 0 ACs remains.
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Keys Ctrl+Y (Redo) pressed
< Debug: Calling GNEUndoList::redo()
< Debug: Adding parkingArea 'parkingAreaA' in GNEChange_Additional
< Debug: Adding parkingArea 'parkingAreaB' in GNEChange_Additional
< Debug: Keys Ctrl+Y (Redo) pressed
< Debug: Calling GNEUndoList::redo()
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
<truncated after showing first 30 lines>
---------- Differences in output ----------
7c7
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <parkingArea id="parkingAreaA" lane="gneE0_0" startPos="5" endPos="10" name="parkingArea1" onRoad="1" friendlyPos="1" width="5.00" length="7.00">
        <param key="KeyA1" value="valueA1"/>
        <param key="KeyA2" value="valueA2"/>
        <param key="KeyA3" value="valueA3"/>
    </parkingArea>
    <parkingArea id="parkingAreaB" lane="gneE0_0" startPos="15" endPos="20" name="parkingArea2" roadsideCapacity="10" width="6.00" length="8.00" angle="30.00">
        <param key="KeyB1" value="valueB1"/>
        <param key="KeyB2" value="valueB2"/>
        <param key="KeyB3" value="valueB3"/>
    </parkingArea>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>

    <edge id=":gneJ0_0" function="internal">
        <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
    </edge>
    <edge id=":gneJ1_0" function="internal">
        <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
    </edge>

    <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1">
        <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
    </edge>
    <edge id="gneE1" from="gneJ1" to="gneJ0" priority="1">
        <lane id="gneE1_0" index="0" speed="13.89" length="50.00" shape="50.00,1.60 0.00,1.60"/>
    </edge>

    <tlLogic id="gneJ0" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>
    <tlLogic id="gneJ1" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>

<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingarea inspect_selection friendlypos ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
10c10
<     <parkingArea id="parkingAreaB" lane="gneE0_0" startPos="15" endPos="20" name="parkingArea2" roadsideCapacity="10" friendlyPos="1" width="6.00" length="8.00" angle="30.00">
---
>     <parkingArea id="parkingAreaB" lane="gneE0_0" startPos="15.00" endPos="20.00" name="parkingArea2" roadsideCapacity="10" width="6.00" length="8.00" angle="30.00">
---------- Differences in errors ----------
15,34c15,16
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaB'
< Debug: Setting new attribute friendlyPos 'true' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute friendlyPos 'true' into parkingArea 'parkingAreaB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute friendlyPos '0' into parkingArea 'parkingAreaB'
< Debug: Setting previous attribute friendlyPos '1' into parkingArea 'parkingAreaA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into parkingArea 'parkingAreaB'
< Debug: Setting previous attribute selected '0' into parkingArea 'parkingAreaA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value 'true' for attribute endPos of parkingArea isn't valid
> Debug: Value 'truei' for attribute endPos of parkingArea isn't valid
38d19
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
40a22,23
> Debug: Keys Ctrl+Z (Undo) pressed
> Debug: Keys Ctrl+Z (Undo) pressed
46,52d28
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingarea inspect_selection lenght ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <parkingArea id="parkingAreaA" lane="gneE0_0" startPos="5" endPos="10" name="parkingArea1" onRoad="1" friendlyPos="1" width="5.00" length="3.4">
---
>     <parkingArea id="parkingAreaA" lane="gneE0_0" startPos="5.00" endPos="10.00" name="parkingArea1" onRoad="1" friendlyPos="1" width="5.00" length="7.00">
10c10
<     <parkingArea id="parkingAreaB" lane="gneE0_0" startPos="15" endPos="20" name="parkingArea2" roadsideCapacity="10" width="6.00" length="3.4" angle="30.00">
---
>     <parkingArea id="parkingAreaB" lane="gneE0_0" startPos="15.00" endPos="20.00" name="parkingArea2" roadsideCapacity="10" width="6.00" length="8.00" angle="30.00">
---------- Differences in errors ----------
15,37c15,18
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaB'
< Debug: Value 'dummyLenght' for attribute length of parkingArea isn't valid
< Debug: Value '-6' for attribute length of parkingArea isn't valid
< Debug: Value '0' for attribute length of parkingArea isn't valid
< Debug: Setting new attribute length '3.4' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute length '3.4' into parkingArea 'parkingAreaB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute length '8.00' into parkingArea 'parkingAreaB'
< Debug: Setting previous attribute length '7.00' into parkingArea 'parkingAreaA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into parkingArea 'parkingAreaB'
< Debug: Setting previous attribute selected '0' into parkingArea 'parkingAreaA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value 'dummyLenght' for attribute roadsideCapacity of parkingArea isn't valid
> Debug: Value '-6' for attribute roadsideCapacity of parkingArea isn't valid
> Debug: Value '' for attribute roadsideCapacity of parkingArea isn't valid
> Debug: Value '3.4i' for attribute roadsideCapacity of parkingArea isn't valid
41d21
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingarea inspect_selection name ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <parkingArea id="parkingAreaA" lane="gneE0_0" startPos="5" endPos="10" name="new Parking Area Name" onRoad="1" friendlyPos="1" width="5.00" length="7.00">
---
>     <parkingArea id="%%%$$$$%$" lane="gneE0_0" startPos="5.00" endPos="10.00" name="parkingArea1" onRoad="1" friendlyPos="1" width="5.00" length="7.00">
10c10
<     <parkingArea id="parkingAreaB" lane="gneE0_0" startPos="15" endPos="20" name="new Parking Area Name" roadsideCapacity="10" width="6.00" length="8.00" angle="30.00">
---
>     <parkingArea id="parkingAreaB" lane="gneE0_0" startPos="15.00" endPos="20.00" name="parkingArea2" roadsideCapacity="10" width="6.00" length="8.00" angle="30.00">
---------- Differences in errors ----------
15,23c15,17
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaB'
< Debug: Value '%%%$$$$%$' for attribute name of parkingArea isn't valid
< Debug: Setting new attribute name 'new Parking Area Name' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute name 'new Parking Area Name' into parkingArea 'parkingAreaB'
---
> Debug: Setting new attribute id '%%%$$$$%$' into parkingArea 'parkingAreaA'
> Debug: Value 'new Parking Area Name' for attribute id of parkingArea isn't valid
> Debug: Value 'new Parking Area Namei' for attribute id of parkingArea isn't valid
26,27c20
< Debug: Setting previous attribute name 'parkingArea2' into parkingArea 'parkingAreaB'
< Debug: Setting previous attribute name 'parkingArea1' into parkingArea 'parkingAreaA'
---
> Debug: Setting previous attribute id 'parkingAreaA' into parkingArea '%%%$$$$%$'
30,35c23,25
< Debug: Setting previous attribute selected '0' into parkingArea 'parkingAreaB'
< Debug: Setting previous attribute selected '0' into parkingArea 'parkingAreaA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Removing parkingArea 'parkingAreaB' in GNEChange_Additional
> Debug: Removing parkingArea 'parkingAreaA' in GNEChange_Additional
> Debug: Removed inspected element from Inspected ACs. 0 ACs remains.
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingarea inspect_selection onroad ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
10c10
<     <parkingArea id="parkingAreaB" lane="gneE0_0" startPos="15" endPos="20" name="parkingArea2" roadsideCapacity="10" onRoad="1" width="6.00" length="8.00" angle="30.00">
---
>     <parkingArea id="parkingAreaB" lane="gneE0_0" startPos="15.00" endPos="20.00" name="parkingArea2" roadsideCapacity="10" width="6.00" length="8.00" angle="30.00">
---------- Differences in errors ----------
15,34c15,16
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaB'
< Debug: Setting new attribute onRoad 'true' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute onRoad 'true' into parkingArea 'parkingAreaB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute onRoad '0' into parkingArea 'parkingAreaB'
< Debug: Setting previous attribute onRoad '1' into parkingArea 'parkingAreaA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into parkingArea 'parkingAreaB'
< Debug: Setting previous attribute selected '0' into parkingArea 'parkingAreaA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value 'true' for attribute startPos of parkingArea isn't valid
> Debug: Value 'truei' for attribute startPos of parkingArea isn't valid
38d19
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
40a22,23
> Debug: Keys Ctrl+Z (Undo) pressed
> Debug: Keys Ctrl+Z (Undo) pressed
46,52d28
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingarea inspect_selection parameters ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5,8c5,8
<     <parkingArea id="parkingAreaA" lane="gneE0_0" startPos="5" endPos="10" name="parkingArea1" onRoad="1" friendlyPos="1" width="5.00" length="7.00">
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>     <parkingArea id="parkingAreaA" lane="gneE0_0" startPos="5.00" endPos="10.00" name="parkingArea1" onRoad="1" friendlyPos="1" length="7.00">
>         <param key="KeyA1" value="valueA1"/>
>         <param key="KeyA2" value="valueA2"/>
>         <param key="KeyA3" value="valueA3"/>
11,13c11,13
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>         <param key="KeyB1" value="valueB1"/>
>         <param key="KeyB2" value="valueB2"/>
>         <param key="KeyB3" value="valueB3"/>
---------- Differences in errors ----------
15,34c15,25
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaB'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into parkingArea 'parkingAreaB'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into parkingArea 'parkingAreaB'
< Debug: Setting new attribute genericParameter '' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute genericParameter '' into parkingArea 'parkingAreaB'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into parkingArea 'parkingAreaB'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into parkingArea 'parkingAreaB'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into parkingArea 'parkingAreaB'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into parkingArea 'parkingAreaB'
---
> Debug: Value 'dummyGenericParameters' for attribute width of parkingArea isn't valid
> Debug: Value 'key1|key2|key3' for attribute width of parkingArea isn't valid
> Debug: Value 'key1=value1|key2=value2|key3=value3' for attribute width of parkingArea isn't valid
> Debug: Value 'key1=|key2=|key3=' for attribute width of parkingArea isn't valid
> Debug: Setting new attribute width '3.20' into parkingArea 'parkingAreaA'
> Debug: Value 'key1duplicated=value1|key1duplicated=value2|key3=value3' for attribute width of parkingArea isn't valid
> Debug: Value 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' for attribute width of parkingArea isn't valid
> Debug: Value 'keyInvalid.;%>%$$=value1|key2=value2|key3=value3' for attribute width of parkingArea isn't valid
<truncated after showing first 30 lines>
---------- Differences in log ----------
1,3d0
< Warning: Invalid format of parameter (dummyGenericParameters)
< Warning: Invalid format of parameter (key1)
< Warning: Invalid format of parameter (keyInvalid.;%>%$$=value1)

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingarea inspect_selection roadsidecapacity ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <parkingArea id="parkingAreaA" lane="gneE0_0" startPos="5" endPos="10" name="parkingArea1" roadsideCapacity="7" onRoad="1" friendlyPos="1" width="5.00" length="7.00">
---
>     <parkingArea id="parkingAreaA" lane="gneE0_0" startPos="5.00" endPos="10.00" name="parkingArea1" onRoad="1" friendlyPos="1" width="5.00" length="7.00">
10c10
<     <parkingArea id="parkingAreaB" lane="gneE0_0" startPos="15" endPos="20" name="parkingArea2" roadsideCapacity="7" width="6.00" length="8.00" angle="30.00">
---
>     <parkingArea id="parkingAreaB" lane="gneE0_0" startPos="15.00" endPos="20.00" name="parkingArea2" roadsideCapacity="10" width="6.00" length="8.00" angle="30.00">
---------- Differences in errors ----------
15,37c15,19
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaB'
< Debug: Value 'dummyRoadSideCapacity' for attribute roadsideCapacity of parkingArea isn't valid
< Debug: Value '' for attribute roadsideCapacity of parkingArea isn't valid
< Debug: Value '-5' for attribute roadsideCapacity of parkingArea isn't valid
< Debug: Setting new attribute roadsideCapacity '7' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute roadsideCapacity '7' into parkingArea 'parkingAreaB'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute roadsideCapacity '10' into parkingArea 'parkingAreaB'
< Debug: Setting previous attribute roadsideCapacity '0' into parkingArea 'parkingAreaA'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into parkingArea 'parkingAreaB'
< Debug: Setting previous attribute selected '0' into parkingArea 'parkingAreaA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value 'dummyRoadSideCapacity' for attribute lane of parkingArea isn't valid
> Debug: Value '2.3' for attribute lane of parkingArea isn't valid
> Debug: Value '-5' for attribute lane of parkingArea isn't valid
> Debug: Value '7' for attribute lane of parkingArea isn't valid
> Debug: Value '7i' for attribute lane of parkingArea isn't valid
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingarea inspect_selection width ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <parkingArea id="parkingAreaA" lane="gneE0_0" startPos="5" endPos="10" name="parkingArea1" onRoad="1" friendlyPos="1" width="2.30" length="7.00">
---
>     <parkingArea id="parkingAreaA" lane="gneE0_0" startPos="5.00" endPos="10.00" name="2.3" onRoad="1" friendlyPos="1" width="5.00" length="7.00">
10c10
<     <parkingArea id="parkingAreaB" lane="gneE0_0" startPos="15" endPos="20" name="parkingArea2" roadsideCapacity="10" width="2.30" length="8.00" angle="30.00">
---
>     <parkingArea id="parkingAreaB" lane="gneE0_0" startPos="15.00" endPos="20.00" name="parkingArea2" roadsideCapacity="10" width="6.00" length="8.00" angle="30.00">
---------- Differences in errors ----------
15,25c15,18
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingAreaB'
< Debug: Value 'dummyWidth' for attribute width of parkingArea isn't valid
< Debug: Value '-5' for attribute width of parkingArea isn't valid
< Debug: Value '0' for attribute width of parkingArea isn't valid
< Debug: Setting new attribute width '2.3' into parkingArea 'parkingAreaA'
< Debug: Setting new attribute width '2.3' into parkingArea 'parkingAreaB'
---
> Debug: Setting new attribute name 'dummyWidth' into parkingArea 'parkingAreaA'
> Debug: Setting new attribute name '-5' into parkingArea 'parkingAreaA'
> Debug: Setting new attribute name '0' into parkingArea 'parkingAreaA'
> Debug: Setting new attribute name '2.3' into parkingArea 'parkingAreaA'
28,29c21
< Debug: Setting previous attribute width '6.00' into parkingArea 'parkingAreaB'
< Debug: Setting previous attribute width '5.00' into parkingArea 'parkingAreaA'
---
> Debug: Setting previous attribute name '0' into parkingArea 'parkingAreaA'
32,37c24
< Debug: Setting previous attribute selected '0' into parkingArea 'parkingAreaB'
< Debug: Setting previous attribute selected '0' into parkingArea 'parkingAreaA'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingarea lock_unlock ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <parkingArea id="parkingArea_gneE0_0_0" lane="gneE0_0" startPos="28.00" endPos="38.00"/>
---
>     <parkingArea id="parkingArea_gneE0_0_0" lane="gneE0_0" startPos="12.00" endPos="22.00"/>
---------- Differences in errors ----------
11,12d10
< Debug: Setting new attribute startPos '20.00' into parkingArea 'parkingArea_gneE0_0_0'
< Debug: Setting new attribute endPos '30.00' into parkingArea 'parkingArea_gneE0_0_0'
14,16d11
< Debug: Setting new attribute blockMovement 'false' into parkingArea 'parkingArea_gneE0_0_0'
< Debug: Setting new attribute startPos '28.00' into parkingArea 'parkingArea_gneE0_0_0'
< Debug: Setting new attribute endPos '38.00' into parkingArea 'parkingArea_gneE0_0_0'
19,20c14
< Debug: Setting previous attribute endPos '30.00' into parkingArea 'parkingArea_gneE0_0_0'
< Debug: Setting previous attribute startPos '20.00' into parkingArea 'parkingArea_gneE0_0_0'
---
> Debug: Setting previous attribute blockMovement '0' into parkingArea 'parkingArea_gneE0_0_0'
23c17
< Debug: Setting previous attribute blockMovement '1' into parkingArea 'parkingArea_gneE0_0_0'
---
> Debug: Removing parkingArea 'parkingArea_gneE0_0_0' in GNEChange_Additional
25,26d18
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute blockMovement '0' into parkingArea 'parkingArea_gneE0_0_0'
28,30d19
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute endPos '22.00' into parkingArea 'parkingArea_gneE0_0_0'
< Debug: Setting previous attribute startPos '12.00' into parkingArea 'parkingArea_gneE0_0_0'
32,33d20
< Debug: Calling GNEUndoList::undo()
< Debug: Removing parkingArea 'parkingArea_gneE0_0_0' in GNEChange_Additional
39,42d25
< Debug: Setting new attribute startPos '20.00' into parkingArea 'parkingArea_gneE0_0_0'
< Debug: Setting new attribute endPos '30.00' into parkingArea 'parkingArea_gneE0_0_0'
< Debug: Keys Ctrl+Y (Redo) pressed
<truncated after showing first 30 lines>
---------- Differences in guisettingsoutput ----------
2c2
<     <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
---
>     <viewport zoom="100.00" x="-6.71" y="0.00" angle="0.00"/>

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingarea move ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <parkingArea id="parkingArea_gneE0_0_0" lane="gneE0_0" startPos="25.00" endPos="35.00"/>
---
>     <parkingArea id="parkingArea_gneE0_0_0" lane="gneE0_0" startPos="12.00" endPos="22.00"/>
---------- Differences in errors ----------
19,82d18
< Debug: Setting new attribute startPos '4.00' into parkingArea 'parkingArea_gneE0_0_0'
< GLDebug: 	Removed object parkingArea:parkingArea_gneE0_0_0 from SUMORTree with boundary 7.80,-10.60,26.20,-2.20
< GLDebug: 	Inserted parkingArea:parkingArea_gneE0_0_0 into SUMORTree with boundary 7.80,-10.60,26.20,-2.20
< Debug: Setting new attribute endPos '14.00' into parkingArea 'parkingArea_gneE0_0_0'
< GLDebug: 	Removed object parkingArea:parkingArea_gneE0_0_0 from SUMORTree with boundary 7.80,-10.60,26.20,-2.20
< GLDebug: 	Inserted parkingArea:parkingArea_gneE0_0_0 into SUMORTree with boundary 7.80,-10.60,26.20,-2.20
< GLDebug: 	Removed object parkingArea:parkingArea_gneE0_0_0 from SUMORTree with boundary 7.80,-10.60,26.20,-2.20
< GLDebug: 	Inserted parkingArea:parkingArea_gneE0_0_0 into SUMORTree with boundary -0.20,-10.60,18.20,-2.20
< Debug: Setting new attribute startPos '12.00' into parkingArea 'parkingArea_gneE0_0_0'
< GLDebug: 	Removed object parkingArea:parkingArea_gneE0_0_0 from SUMORTree with boundary -0.20,-10.60,18.20,-2.20
< GLDebug: 	Inserted parkingArea:parkingArea_gneE0_0_0 into SUMORTree with boundary -0.20,-10.60,18.20,-2.20
< Debug: Setting new attribute endPos '22.00' into parkingArea 'parkingArea_gneE0_0_0'
< GLDebug: 	Removed object parkingArea:parkingArea_gneE0_0_0 from SUMORTree with boundary -0.20,-10.60,18.20,-2.20
< GLDebug: 	Inserted parkingArea:parkingArea_gneE0_0_0 into SUMORTree with boundary -0.20,-10.60,18.20,-2.20
< GLDebug: 	Removed object parkingArea:parkingArea_gneE0_0_0 from SUMORTree with boundary -0.20,-10.60,18.20,-2.20
< GLDebug: 	Inserted parkingArea:parkingArea_gneE0_0_0 into SUMORTree with boundary 7.80,-10.60,26.20,-2.20
< Debug: Setting new attribute startPos '20.00' into parkingArea 'parkingArea_gneE0_0_0'
< GLDebug: 	Removed object parkingArea:parkingArea_gneE0_0_0 from SUMORTree with boundary 7.80,-10.60,26.20,-2.20
< GLDebug: 	Inserted parkingArea:parkingArea_gneE0_0_0 into SUMORTree with boundary 7.80,-10.60,26.20,-2.20
< Debug: Setting new attribute endPos '30.00' into parkingArea 'parkingArea_gneE0_0_0'
< GLDebug: 	Removed object parkingArea:parkingArea_gneE0_0_0 from SUMORTree with boundary 7.80,-10.60,26.20,-2.20
< GLDebug: 	Inserted parkingArea:parkingArea_gneE0_0_0 into SUMORTree with boundary 7.80,-10.60,26.20,-2.20
< GLDebug: 	Removed object parkingArea:parkingArea_gneE0_0_0 from SUMORTree with boundary 7.80,-10.60,26.20,-2.20
< GLDebug: 	Inserted parkingArea:parkingArea_gneE0_0_0 into SUMORTree with boundary 15.80,-10.60,34.20,-2.20
< Debug: Setting new attribute startPos '12.00' into parkingArea 'parkingArea_gneE0_0_0'
< GLDebug: 	Removed object parkingArea:parkingArea_gneE0_0_0 from SUMORTree with boundary 15.80,-10.60,34.20,-2.20
< GLDebug: 	Inserted parkingArea:parkingArea_gneE0_0_0 into SUMORTree with boundary 15.80,-10.60,34.20,-2.20
< Debug: Setting new attribute endPos '22.00' into parkingArea 'parkingArea_gneE0_0_0'
< GLDebug: 	Removed object parkingArea:parkingArea_gneE0_0_0 from SUMORTree with boundary 15.80,-10.60,34.20,-2.20
<truncated after showing first 30 lines>
---------- Differences in guisettingsoutput ----------
2c2
<     <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
---
>     <viewport zoom="100.00" x="30.29" y="0.00" angle="0.00"/>

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingspace delete ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5,6c5,7
<     <parkingArea id="parkingAreaLoaded_A" lane="gneE0_0" startPos="33.00" endPos="43.00" length="5.00"/>
<     <parkingArea id="parkingAreaLoaded_B" lane="gneE1_0" startPos="7.00" endPos="17.00" length="5.00"/>
---
>     <parkingArea id="parkingAreaLoaded_A" lane="gneE0_0" startPos="33.00" endPos="43.00" length="5.00">
>         <space x="28.00" y="-12.00"/>
>     </parkingArea>
---------- Differences in errors ----------
58,60c58,61
< Debug: Key ENTER pressed
< Debug: Keys Ctrl+Y (Redo) pressed
< Debug: Calling GNEUndoList::redo()
---
> Debug: Removing space 'parkingAreaLoaded_Bspace0' in GNEChange_Additional
> GLDebug: 	Removed object parkingSpace:parkingAreaLoaded_Bspace0 from SUMORTree with boundary 21.40,2.00,34.60,17.00
> Debug: Removing parkingArea 'parkingAreaLoaded_B' in GNEChange_Additional
> GLDebug: 	Removed object parkingArea:parkingAreaLoaded_B from SUMORTree with boundary 28.80,2.20,47.20,10.60
64a66,81
> Debug: Removing connection 'gneE0_0->gneE1_0' from edge 'gneE0'
> Debug: net has to be saved
> Debug: Current saving Status: net unsaved, additionals unsaved, demand elements saved, data sets saved
> Debug: Deleting TLS from junction 'gneJ1'
> Debug: Adding TLS into junction 'gneJ1'
> Debug: Removing connection 'gneE1_0->gneE0_0' from edge 'gneE1'
> Debug: Deleting TLS from junction 'gneJ1'
> Debug: Adding TLS into junction 'gneJ1'
> Debug: Deleting TLS from junction 'gneJ1'
> Debug: Setting new attribute type 'priority' into junction 'gneJ1'
> Debug: Deleting TLS from junction 'gneJ0'
> Debug: Setting new attribute type 'priority' into junction 'gneJ0'
> Debug: Removing edge 'gneE1' from net
> GLDebug: 	Removed object edge:gneE1 from SUMORTree with boundary -10.00,-10.00,60.00,11.60
> Debug: Key ENTER pressed
> Debug: Keys Ctrl+Y (Redo) pressed
66,68d82
< Debug: Calling GNEUndoList::redo()
< Debug: Removing space 'parkingAreaLoaded_Bspace0' in GNEChange_Additional
< GLDebug: 	Removed object parkingSpace:parkingAreaLoaded_Bspace0 from SUMORTree with boundary 21.40,2.00,34.60,17.00
<truncated after showing first 30 lines>
---------- Differences in net ----------
8,14d7
<     <edge id=":gneJ0_0" function="internal">
<         <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
<     </edge>
<     <edge id=":gneJ1_0" function="internal">
<         <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
<     </edge>
< 
18,39d10
<     <edge id="gneE1" from="gneJ1" to="gneJ0" priority="1">
<         <lane id="gneE1_0" index="0" speed="13.89" length="50.00" shape="50.00,1.60 0.00,1.60"/>
<     </edge>
< 
<     <tlLogic id="gneJ0" type="static" programID="0" offset="0">
<         <phase duration="87" state="G"/>
<         <phase duration="3"  state="y"/>
<     </tlLogic>
<     <tlLogic id="gneJ1" type="static" programID="0" offset="0">
<         <phase duration="87" state="G"/>
<         <phase duration="3"  state="y"/>
<     </tlLogic>
< 
<     <junction id="gneJ0" type="traffic_light" x="0.00" y="0.00" incLanes="gneE1_0" intLanes=":gneJ0_0_0" shape="0.00,0.00 0.00,3.20 0.00,0.00">
<         <request index="0" response="0" foes="0" cont="0"/>
<     </junction>
<     <junction id="gneJ1" type="traffic_light" x="50.00" y="0.00" incLanes="gneE0_0" intLanes=":gneJ1_0_0" shape="50.00,0.00 50.00,-3.20 50.00,0.00">
<         <request index="0" response="0" foes="0" cont="0"/>
<     </junction>
< 
<     <connection from="gneE0" to="gneE1" fromLane="0" toLane="0" via=":gneJ1_0_0" tl="gneJ1" linkIndex="0" dir="t" state="O"/>
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingspace inspect_selection angle ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
6c6
<         <space x="17.00" y="7.00" z="10.00" width="4.00" angle="32.50">
---
>         <space x="17.00" y="7.00" z="10.00" width="4.00" length="32.50" angle="45.00">
13c13
<         <space x="34.00" y="7.00" z="20.00" width="2.00" length="12.00" angle="32.50">
---
>         <space x="34.00" y="7.00" z="20.00" width="2.00" length="12.00" angle="12.00">
---------- Differences in errors ----------
34,47c34,36
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into junction 'gneJ3'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingArea_A'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingArea_B'
< Debug: Setting new attribute selected 'true' into space 'parkingArea_Aspace0'
< Debug: Setting new attribute selected 'true' into space 'parkingArea_Bspace0'
< Debug: Value 'dummyAngle' for attribute angle of space isn't valid
< Debug: Setting new attribute angle '-6.00' into space 'parkingArea_Aspace0'
---
> Debug: Value 'dummyAngle' for attribute length of space isn't valid
> Debug: Value '-6' for attribute length of space isn't valid
> Debug: Setting new attribute length '500' into space 'parkingArea_Aspace0'
49,72c38,41
< GLDebug: 	Inserted parkingSpace:parkingArea_Aspace0 into SUMORTree with boundary 10.01,1.79,24.51,17.18
< Debug: Setting new attribute angle '-6.00' into space 'parkingArea_Bspace0'
< GLDebug: 	Removed object parkingSpace:parkingArea_Bspace0 from SUMORTree with boundary 25.53,1.79,39.98,23.95
< GLDebug: 	Inserted parkingSpace:parkingArea_Bspace0 into SUMORTree with boundary 28.01,1.90,41.25,24.04
< Debug: Setting new attribute angle '140.00' into space 'parkingArea_Aspace0'
< GLDebug: 	Removed object parkingSpace:parkingArea_Aspace0 from SUMORTree with boundary 10.01,1.79,24.51,17.18
< GLDebug: 	Inserted parkingSpace:parkingArea_Aspace0 into SUMORTree with boundary 7.25,-3.12,23.53,13.29
< Debug: Setting new attribute angle '140.00' into space 'parkingArea_Bspace0'
< GLDebug: 	Removed object parkingSpace:parkingArea_Bspace0 from SUMORTree with boundary 28.01,1.90,41.25,24.04
< GLDebug: 	Inserted parkingSpace:parkingArea_Bspace0 into SUMORTree with boundary 20.52,-7.84,39.77,12.64
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingspace inspect_selection block_move ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
17,28c17
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into junction 'gneJ3'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingArea_A'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingArea_B'
< Debug: Setting new attribute selected 'true' into space 'parkingArea_Aspace0'
< Debug: Setting new attribute selected 'true' into space 'parkingArea_Bspace0'
---
> Debug: Setting new attribute blockMovement 'true' into space 'parkingArea_Aspace0'
31,42c20
< Debug: Setting previous attribute selected '0' into space 'parkingArea_Bspace0'
< Debug: Setting previous attribute selected '0' into space 'parkingArea_Aspace0'
< Debug: Setting previous attribute selected '0' into parkingArea 'parkingArea_B'
< Debug: Setting previous attribute selected '0' into parkingArea 'parkingArea_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE2'
< Debug: Setting previous attribute selected '0' into junction 'gneJ3'
< Debug: Setting previous attribute selected '0' into edge 'gneE3'
< Debug: Setting previous attribute selected '0' into junction 'gneJ2'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Setting previous attribute blockMovement '0' into space 'parkingArea_Aspace0'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingspace inspect_selection lenght ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
6c6
<         <space x="17.00" y="7.00" z="10.00" width="4.00" length="3.40" angle="45.00">
---
>         <space x="17.00" y="7.00" z="10.00" width="3.40" angle="45.00">
13c13
<         <space x="34.00" y="7.00" z="20.00" width="2.00" length="3.40" angle="12.00">
---
>         <space x="34.00" y="7.00" z="20.00" width="2.00" length="12.00" angle="12.00">
---------- Differences in errors ----------
34,49c34,37
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into junction 'gneJ3'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingArea_A'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingArea_B'
< Debug: Setting new attribute selected 'true' into space 'parkingArea_Aspace0'
< Debug: Setting new attribute selected 'true' into space 'parkingArea_Bspace0'
< Debug: Value 'dummyLenght' for attribute length of space isn't valid
< Debug: Value '-6' for attribute length of space isn't valid
< Debug: Value '0' for attribute length of space isn't valid
< Debug: Setting new attribute length '3.4' into space 'parkingArea_Aspace0'
---
> Debug: Value 'dummyLenght' for attribute width of space isn't valid
> Debug: Value '-6' for attribute width of space isn't valid
> Debug: Value '0' for attribute width of space isn't valid
> Debug: Setting new attribute width '3.4' into space 'parkingArea_Aspace0'
51,54c39
< GLDebug: 	Inserted parkingSpace:parkingArea_Aspace0 into SUMORTree with boundary 8.18,0.59,23.41,15.82
< Debug: Setting new attribute length '3.4' into space 'parkingArea_Bspace0'
< GLDebug: 	Removed object parkingSpace:parkingArea_Bspace0 from SUMORTree with boundary 25.53,1.79,39.98,23.95
< GLDebug: 	Inserted parkingSpace:parkingArea_Bspace0 into SUMORTree with boundary 27.31,1.79,39.98,15.53
---
> GLDebug: 	Inserted parkingSpace:parkingArea_Aspace0 into SUMORTree with boundary 7.26,0.80,23.20,16.74
57,61c42,43
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingspace inspect_selection parameters ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
34,213c34
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into junction 'gneJ3'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingArea_A'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingArea_B'
< Debug: Setting new attribute selected 'true' into space 'parkingArea_Aspace0'
< Debug: Setting new attribute selected 'true' into space 'parkingArea_Bspace0'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into space 'parkingArea_Aspace0'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into space 'parkingArea_Bspace0'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into space 'parkingArea_Aspace0'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into space 'parkingArea_Bspace0'
< Debug: Setting new attribute genericParameter '' into space 'parkingArea_Aspace0'
< Debug: Setting new attribute genericParameter '' into space 'parkingArea_Bspace0'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into space 'parkingArea_Aspace0'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into space 'parkingArea_Bspace0'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into space 'parkingArea_Aspace0'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into space 'parkingArea_Bspace0'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into space 'parkingArea_Aspace0'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into space 'parkingArea_Bspace0'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into space 'parkingArea_Aspace0'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into space 'parkingArea_Bspace0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into space 'parkingArea_Bspace0'
<truncated after showing first 30 lines>
---------- Differences in log ----------
1,3d0
< Warning: Invalid format of parameter (dummyGenericParameters)
< Warning: Invalid format of parameter (key1)
< Warning: Invalid format of parameter (keyInvalid.;%>%$$=value1)
---------- Differences in output ----------
17c17
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <parkingArea id="parkingArea_A" lane="gneE0_0" startPos="12.00" endPos="22.00" length="5.00">
        <space x="17.00" y="7.00" z="10.00" width="4.00" angle="45.00">
            <param key="keyFinal1" value="value1"/>
            <param key="keyFinal2" value="value2"/>
            <param key="keyFinal3" value="value3"/>
        </space>
    </parkingArea>
    <parkingArea id="parkingArea_B" lane="gneE0_0" startPos="29.00" endPos="39.00" length="5.00">
        <space x="34.00" y="7.00" z="20.00" width="2.00" length="12.00" angle="12.00">
            <param key="keyFinal1" value="value1"/>
            <param key="keyFinal2" value="value2"/>
            <param key="keyFinal3" value="value3"/>
        </space>
    </parkingArea>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="11.40" angle="0.00"/>
</viewsettings>
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,20.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>

    <edge id=":gneJ0_0" function="internal">
        <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
    </edge>
    <edge id=":gneJ0_c0" function="crossing" crossingEdges="gneE0">
        <lane id=":gneJ0_c0_0" index="0" allow="pedestrian" speed="1.00" length="3.20" width="3.00" shape="-1.50,-3.20 -1.50,0.00"/>
    </edge>
    <edge id=":gneJ0_c1" function="crossing" crossingEdges="gneE1">
        <lane id=":gneJ0_c1_0" index="0" allow="pedestrian" speed="1.00" length="3.20" width="3.00" shape="-1.50,0.00 -1.50,3.20"/>
    </edge>
    <edge id=":gneJ0_w1" function="walkingarea">
        <lane id=":gneJ0_w1_0" index="0" allow="pedestrian" speed="1.00" length="0.10" width="3.00" shape="-3.00,0.00 0.00,0.00 0.00,0.00 -3.00,0.00"/>
    </edge>
    <edge id=":gneJ0_w2" function="walkingarea">
        <lane id=":gneJ0_w2_0" index="0" allow="pedestrian" speed="1.00" length="6.40" width="3.00" shape="-3.00,3.20 0.00,3.20 0.00,-3.20 -3.00,-3.20"/>
    </edge>
    <edge id=":gneJ1_0" function="internal">
        <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
    </edge>
    <edge id=":gneJ1_c0" function="crossing" crossingEdges="gneE1">
        <lane id=":gneJ1_c0_0" index="0" allow="pedestrian" speed="1.00" length="3.20" width="3.00" shape="51.50,3.20 51.50,0.00"/>
    </edge>
    <edge id=":gneJ1_c1" function="crossing" crossingEdges="gneE0">
        <lane id=":gneJ1_c1_0" index="0" allow="pedestrian" speed="1.00" length="3.20" width="3.00" shape="51.50,0.00 51.50,-3.20"/>
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingspace inspect_selection parent ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
34,175c34
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into junction 'gneJ3'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingArea_A'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingArea_B'
< Debug: Setting new attribute selected 'true' into space 'parkingArea_Aspace0'
< Debug: Setting new attribute selected 'true' into space 'parkingArea_Bspace0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into space 'parkingArea_Bspace0'
< Debug: Setting previous attribute selected '0' into space 'parkingArea_Aspace0'
< Debug: Setting previous attribute selected '0' into parkingArea 'parkingArea_B'
< Debug: Setting previous attribute selected '0' into parkingArea 'parkingArea_A'
< Debug: Setting previous attribute selected '0' into edge 'gneE2'
< Debug: Setting previous attribute selected '0' into junction 'gneJ3'
< Debug: Setting previous attribute selected '0' into edge 'gneE3'
< Debug: Setting previous attribute selected '0' into junction 'gneJ2'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Removing space 'parkingArea_Bspace0' in GNEChange_Additional
<truncated after showing first 30 lines>
---------- Differences in output ----------
10c10
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <parkingArea id="parkingArea_A" lane="gneE0_0" startPos="12.00" endPos="22.00" length="5.00">
        <space x="17.00" y="7.00" z="10.00" width="4.00" angle="45.00">
            <param key="KeyA1" value="valueA1"/>
            <param key="KeyA2" value="valueA2"/>
            <param key="KeyA3" value="valueA3"/>
        </space>
    </parkingArea>
    <parkingArea id="parkingArea_B" lane="gneE0_0" startPos="29.00" endPos="39.00" length="5.00">
        <space x="34.00" y="7.00" z="20.00" width="2.00" length="12.00" angle="12.00">
            <param key="KeyB1" value="valueB1"/>
            <param key="KeyB2" value="valueB2"/>
            <param key="KeyB3" value="valueB3"/>
        </space>
    </parkingArea>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="11.40" angle="0.00"/>
</viewsettings>
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,20.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>

    <edge id=":gneJ0_0" function="internal">
        <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
    </edge>
    <edge id=":gneJ0_c0" function="crossing" crossingEdges="gneE0">
        <lane id=":gneJ0_c0_0" index="0" allow="pedestrian" speed="1.00" length="3.20" width="3.00" shape="-1.50,-3.20 -1.50,0.00"/>
    </edge>
    <edge id=":gneJ0_c1" function="crossing" crossingEdges="gneE1">
        <lane id=":gneJ0_c1_0" index="0" allow="pedestrian" speed="1.00" length="3.20" width="3.00" shape="-1.50,0.00 -1.50,3.20"/>
    </edge>
    <edge id=":gneJ0_w1" function="walkingarea">
        <lane id=":gneJ0_w1_0" index="0" allow="pedestrian" speed="1.00" length="0.10" width="3.00" shape="-3.00,0.00 0.00,0.00 0.00,0.00 -3.00,0.00"/>
    </edge>
    <edge id=":gneJ0_w2" function="walkingarea">
        <lane id=":gneJ0_w2_0" index="0" allow="pedestrian" speed="1.00" length="6.40" width="3.00" shape="-3.00,3.20 0.00,3.20 0.00,-3.20 -3.00,-3.20"/>
    </edge>
    <edge id=":gneJ1_0" function="internal">
        <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
    </edge>
    <edge id=":gneJ1_c0" function="crossing" crossingEdges="gneE1">
        <lane id=":gneJ1_c0_0" index="0" allow="pedestrian" speed="1.00" length="3.20" width="3.00" shape="51.50,3.20 51.50,0.00"/>
    </edge>
    <edge id=":gneJ1_c1" function="crossing" crossingEdges="gneE0">
        <lane id=":gneJ1_c1_0" index="0" allow="pedestrian" speed="1.00" length="3.20" width="3.00" shape="51.50,0.00 51.50,-3.20"/>
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingspace inspect_selection width ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
6c6
<         <space x="17.00" y="7.00" z="10.00" width="2.30" angle="45.00">
---
>         <space x="17.00" y="7.00" z="10.00" width="4.00" angle="45.00">
13c13
<         <space x="34.00" y="7.00" z="20.00" width="2.30" length="12.00" angle="12.00">
---
>         <space x="34.00" y="7.00" z="20.00" width="2.00" length="12.00" angle="12.00">
---------- Differences in errors ----------
34,76c34,38
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ2'
< Debug: Setting new attribute selected 'true' into edge 'gneE3'
< Debug: Setting new attribute selected 'true' into junction 'gneJ3'
< Debug: Setting new attribute selected 'true' into edge 'gneE2'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingArea_A'
< Debug: Setting new attribute selected 'true' into parkingArea 'parkingArea_B'
< Debug: Setting new attribute selected 'true' into space 'parkingArea_Aspace0'
< Debug: Setting new attribute selected 'true' into space 'parkingArea_Bspace0'
< Debug: Value 'dummyWidth' for attribute width of space isn't valid
< Debug: Value '-5' for attribute width of space isn't valid
< Debug: Value '0' for attribute width of space isn't valid
< Debug: Setting new attribute width '2.3' into space 'parkingArea_Aspace0'
< GLDebug: 	Removed object parkingSpace:parkingArea_Aspace0 from SUMORTree with boundary 7.05,0.59,23.41,16.95
< GLDebug: 	Inserted parkingSpace:parkingArea_Aspace0 into SUMORTree with boundary 7.65,1.19,22.81,16.35
< Debug: Setting new attribute width '2.3' into space 'parkingArea_Bspace0'
< GLDebug: 	Removed object parkingSpace:parkingArea_Bspace0 from SUMORTree with boundary 25.53,1.79,39.98,23.95
< GLDebug: 	Inserted parkingSpace:parkingArea_Bspace0 into SUMORTree with boundary 25.38,1.76,40.12,23.98
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute width '2.00' into space 'parkingArea_Bspace0'
< GLDebug: 	Removed object parkingSpace:parkingArea_Bspace0 from SUMORTree with boundary 25.38,1.76,40.12,23.98
< GLDebug: 	Inserted parkingSpace:parkingArea_Bspace0 into SUMORTree with boundary 25.53,1.79,39.98,23.95
< Debug: Setting previous attribute width '4.00' into space 'parkingArea_Aspace0'
< GLDebug: 	Removed object parkingSpace:parkingArea_Aspace0 from SUMORTree with boundary 7.65,1.19,22.81,16.35
< GLDebug: 	Inserted parkingSpace:parkingArea_Aspace0 into SUMORTree with boundary 7.05,0.59,23.41,16.95
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingspace lock_unlock ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
6c6
<         <space x="16.00" y="13.00"/>
---
>         <space x="17.00" y="14.00"/>
---------- Differences in errors ----------
13,16d12
< Debug: Setting new attribute pos '34.00,8.00' into space 'parkingArea_gneE0_0_0space0'
< Debug: Setting new attribute blockMovement 'true' into space 'parkingArea_gneE0_0_0space0'
< Debug: Setting new attribute blockMovement 'false' into space 'parkingArea_gneE0_0_0space0'
< Debug: Setting new attribute pos '16.00,13.00' into space 'parkingArea_gneE0_0_0space0'
19c15
< Debug: Setting previous attribute pos '34.00,8.00' into space 'parkingArea_gneE0_0_0space0'
---
> Debug: Removing space 'parkingArea_gneE0_0_0space0' in GNEChange_Additional
22c18
< Debug: Setting previous attribute blockMovement '1' into space 'parkingArea_gneE0_0_0space0'
---
> Debug: Removing parkingArea 'parkingArea_gneE0_0_0' in GNEChange_Additional
24,25d19
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute blockMovement '0' into space 'parkingArea_gneE0_0_0space0'
27,28d20
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '17.00,14.00' into space 'parkingArea_gneE0_0_0space0'
30,31d21
< Debug: Calling GNEUndoList::undo()
< Debug: Removing space 'parkingArea_gneE0_0_0space0' in GNEChange_Additional
33,34d22
< Debug: Calling GNEUndoList::undo()
< Debug: Removing parkingArea 'parkingArea_gneE0_0_0' in GNEChange_Additional
42,43d29
< Debug: Calling GNEUndoList::redo()
< Debug: Setting new attribute pos '34.00,8.00' into space 'parkingArea_gneE0_0_0space0'
45,46d30
< Debug: Calling GNEUndoList::redo()
<truncated after showing first 30 lines>
---------- Differences in guisettingsoutput ----------
2c2
<     <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
---
>     <viewport zoom="100.00" x="51.43" y="-4.23" angle="0.00"/>

TEST FAILED on ts-sim-winbuild-ba : additionalElements parkingspace move ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
6c6
<         <space x="16.00" y="0.00"/>
---
>         <space x="17.00" y="14.00"/>
---------- Differences in errors ----------
13,16d12
< Debug: Setting new attribute pos '34.00,12.00' into space 'parkingArea_gneE0_0_0space0'
< Debug: Setting new attribute pos '39.00,12.00' into space 'parkingArea_gneE0_0_0space0'
< Debug: Setting new attribute pos '39.00,-2.00' into space 'parkingArea_gneE0_0_0space0'
< Debug: Setting new attribute pos '16.00,0.00' into space 'parkingArea_gneE0_0_0space0'
19c15
< Debug: Setting previous attribute pos '39.00,-2.00' into space 'parkingArea_gneE0_0_0space0'
---
> Debug: Removing space 'parkingArea_gneE0_0_0space0' in GNEChange_Additional
22c18
< Debug: Setting previous attribute pos '39.00,12.00' into space 'parkingArea_gneE0_0_0space0'
---
> Debug: Removing parkingArea 'parkingArea_gneE0_0_0' in GNEChange_Additional
24,25d19
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '34.00,12.00' into space 'parkingArea_gneE0_0_0space0'
27,28d20
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute pos '17.00,14.00' into space 'parkingArea_gneE0_0_0space0'
30,31d21
< Debug: Calling GNEUndoList::undo()
< Debug: Removing space 'parkingArea_gneE0_0_0space0' in GNEChange_Additional
33,34d22
< Debug: Calling GNEUndoList::undo()
< Debug: Removing parkingArea 'parkingArea_gneE0_0_0' in GNEChange_Additional
42,43d29
< Debug: Calling GNEUndoList::redo()
< Debug: Setting new attribute pos '34.00,12.00' into space 'parkingArea_gneE0_0_0space0'
45,46d30
< Debug: Calling GNEUndoList::redo()
<truncated after showing first 30 lines>
---------- Differences in guisettingsoutput ----------
2c2
<     <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
---
>     <viewport zoom="100.00" x="25.00" y="19.03" angle="0.00"/>

TEST FAILED on ts-sim-winbuild-ba : additionalElements routeprobe inspect_selection begin ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <routeProbe id="routeProbe_01" edge="gneE1" freq="100.00" file="fileA.txt" begin="11.30">
---
>     <routeProbe id="routeProbe_01" edge="gneE1" freq="100.00" name="11.3" file="fileA.txt" begin="0.00">
10c10
<     <routeProbe id="routeProbe_02" edge="gneE1" freq="120.00" file="fileB.txt" begin="11.30">
---
>     <routeProbe id="routeProbe_02" edge="gneE1" freq="120.00" file="fileB.txt" begin="3.00">
---------- Differences in errors ----------
18,28c18,19
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE1_0togneE0_0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE0_0togneE1_0'
< Debug: Setting new attribute selected 'true' into routeProbe 'routeProbe_01'
< Debug: Setting new attribute selected 'true' into routeProbe 'routeProbe_02'
< Debug: Value '-5' for attribute begin of routeProbe isn't valid
< Debug: Setting new attribute begin '11.3' into routeProbe 'routeProbe_01'
< Debug: Setting new attribute begin '11.3' into routeProbe 'routeProbe_02'
---
> Debug: Setting new attribute name '-5' into routeProbe 'routeProbe_01'
> Debug: Setting new attribute name '11.3' into routeProbe 'routeProbe_01'
31,32c22
< Debug: Setting previous attribute begin '3.00' into routeProbe 'routeProbe_02'
< Debug: Setting previous attribute begin '0.00' into routeProbe 'routeProbe_01'
---
> Debug: Setting previous attribute name '-5' into routeProbe 'routeProbe_01'
35,42c25
< Debug: Setting previous attribute selected '0' into routeProbe 'routeProbe_02'
< Debug: Setting previous attribute selected '0' into routeProbe 'routeProbe_01'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE0_0togneE1_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE1_0togneE0_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements routeprobe inspect_selection file ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
10c10
<     <routeProbe id="routeProbe_02" edge="gneE1" freq="120.00" file="fileA.txt" begin="3.00">
---
>     <routeProbe id="routeProbe_02" edge="gneE1" freq="120.00" file="fileB.txt" begin="3.00">
---------- Differences in errors ----------
18,40c18,20
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE1_0togneE0_0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE0_0togneE1_0'
< Debug: Setting new attribute selected 'true' into routeProbe 'routeProbe_01'
< Debug: Setting new attribute selected 'true' into routeProbe 'routeProbe_02'
< Debug: Value '$$$$$$$$' for attribute file of routeProbe isn't valid
< Debug: Setting new attribute file 'fileA.txt' into routeProbe 'routeProbe_02'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute file 'fileB.txt' into routeProbe 'routeProbe_02'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into routeProbe 'routeProbe_02'
< Debug: Setting previous attribute selected '0' into routeProbe 'routeProbe_01'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE0_0togneE1_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE1_0togneE0_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value '$$$$$$$$' for attribute freq of routeProbe isn't valid
> Debug: Value 'fileA.txt' for attribute freq of routeProbe isn't valid
> Debug: Value 'fileA.txti' for attribute freq of routeProbe isn't valid
44d23
< Debug: Removed inspected element from Inspected ACs. 1 ACs remains.
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements routeprobe inspect_selection freq ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <routeProbe id="routeProbe_01" edge="gneE1" freq="50" file="fileA.txt" begin="0.00">
---
>     <routeProbe id="50" edge="gneE1" freq="100.00" file="fileA.txt" begin="0.00">
10c10
<     <routeProbe id="routeProbe_02" edge="gneE1" freq="50" file="fileB.txt" begin="3.00">
---
>     <routeProbe id="routeProbe_02" edge="gneE1" freq="120.00" file="fileB.txt" begin="3.00">
---------- Differences in errors ----------
18,28c18,19
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE1_0togneE0_0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE0_0togneE1_0'
< Debug: Setting new attribute selected 'true' into routeProbe 'routeProbe_01'
< Debug: Setting new attribute selected 'true' into routeProbe 'routeProbe_02'
< Debug: Value '-30' for attribute freq of routeProbe isn't valid
< Debug: Setting new attribute freq '50' into routeProbe 'routeProbe_01'
< Debug: Setting new attribute freq '50' into routeProbe 'routeProbe_02'
---
> Debug: Setting new attribute id '-30' into routeProbe 'routeProbe_01'
> Debug: Setting new attribute id '50' into routeProbe '-30'
31,32c22
< Debug: Setting previous attribute freq '120.00' into routeProbe 'routeProbe_02'
< Debug: Setting previous attribute freq '100.00' into routeProbe 'routeProbe_01'
---
> Debug: Setting previous attribute id '-30' into routeProbe '50'
35,42c25
< Debug: Setting previous attribute selected '0' into routeProbe 'routeProbe_02'
< Debug: Setting previous attribute selected '0' into routeProbe 'routeProbe_01'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE0_0togneE1_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE1_0togneE0_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements routeprobe inspect_selection name ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5c5
<     <routeProbe id="routeProbe_01" edge="gneE1" freq="100.00" name="customName" file="fileA.txt" begin="0.00">
---
>     <routeProbe id="routeProbe_01" edge="gneE1" freq="100.00" file="fileA.txt" begin="0.00">
10c10
<     <routeProbe id="routeProbe_02" edge="gneE1" freq="120.00" name="customName" file="fileB.txt" begin="3.00">
---
>     <routeProbe id="routeProbe_02" edge="gneE1" freq="120.00" file="fileB.txt" begin="3.00">
---------- Differences in errors ----------
18,42c18,20
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE1_0togneE0_0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE0_0togneE1_0'
< Debug: Setting new attribute selected 'true' into routeProbe 'routeProbe_01'
< Debug: Setting new attribute selected 'true' into routeProbe 'routeProbe_02'
< Debug: Value '%%%;:..&&%$%$' for attribute name of routeProbe isn't valid
< Debug: Setting new attribute name 'customName' into routeProbe 'routeProbe_01'
< Debug: Setting new attribute name 'customName' into routeProbe 'routeProbe_02'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute name '' into routeProbe 'routeProbe_02'
< Debug: Setting previous attribute name '' into routeProbe 'routeProbe_01'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into routeProbe 'routeProbe_02'
< Debug: Setting previous attribute selected '0' into routeProbe 'routeProbe_01'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE0_0togneE1_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE1_0togneE0_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE1'
< Debug: Setting previous attribute selected '0' into junction 'gneJ0'
---
> Debug: Value '%%%;:..&&%$%$' for attribute edge of routeProbe isn't valid
> Debug: Value 'customName' for attribute edge of routeProbe isn't valid
> Debug: Value 'customNamei' for attribute edge of routeProbe isn't valid
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements routeprobe inspect_selection parameters ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
6,8c6,8
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>         <param key="KeyA1" value="valueA1"/>
>         <param key="KeyA2" value="valueA3"/>
>         <param key="KeyA3" value="valueA2"/>
11,13c11,13
<         <param key="keyFinal1" value="value1"/>
<         <param key="keyFinal2" value="value2"/>
<         <param key="keyFinal3" value="value3"/>
---
>         <param key="KeyB1" value="valueB1"/>
>         <param key="KeyB2" value="valueB3"/>
>         <param key="KeyB3" value="valueB2"/>
---------- Differences in errors ----------
18,39c18,28
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE1_0togneE0_0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE0_0togneE1_0'
< Debug: Setting new attribute selected 'true' into routeProbe 'routeProbe_01'
< Debug: Setting new attribute selected 'true' into routeProbe 'routeProbe_02'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into routeProbe 'routeProbe_01'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into routeProbe 'routeProbe_02'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into routeProbe 'routeProbe_01'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into routeProbe 'routeProbe_02'
< Debug: Setting new attribute genericParameter '' into routeProbe 'routeProbe_01'
< Debug: Setting new attribute genericParameter '' into routeProbe 'routeProbe_02'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into routeProbe 'routeProbe_01'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into routeProbe 'routeProbe_02'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into routeProbe 'routeProbe_01'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into routeProbe 'routeProbe_02'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into routeProbe 'routeProbe_01'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into routeProbe 'routeProbe_02'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into routeProbe 'routeProbe_01'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into routeProbe 'routeProbe_02'
---
> Debug: Value 'dummyGenericParameters' for attribute begin of routeProbe isn't valid
> Debug: Value 'key1|key2|key3' for attribute begin of routeProbe isn't valid
> Debug: Value 'key1=value1|key2=value2|key3=value3' for attribute begin of routeProbe isn't valid
> Debug: Value 'key1=|key2=|key3=' for attribute begin of routeProbe isn't valid
> Debug: Setting new attribute begin '0' into routeProbe 'routeProbe_01'
> Debug: Value 'key1duplicated=value1|key1duplicated=value2|key3=value3' for attribute begin of routeProbe isn't valid
<truncated after showing first 30 lines>
---------- Differences in log ----------
1,3d0
< Warning: Invalid format of parameter (dummyGenericParameters)
< Warning: Invalid format of parameter (key1)
< Warning: Invalid format of parameter (keyInvalid.;%>%$$=value1)

TEST FAILED on ts-sim-winbuild-ba : additionalElements vaporizer inspect_selection begin ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
12,22c12,14
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE1_0togneE0_0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE0_0togneE1_0'
< Debug: Setting new attribute selected 'true' into vaporizer 'gneE0'
< Debug: Setting new attribute selected 'true' into vaporizer 'gneE1'
< Debug: Value '-30' for attribute begin of vaporizer isn't valid
< Debug: Setting new attribute begin '5' into vaporizer 'gneE0'
< Debug: Setting new attribute begin '5' into vaporizer 'gneE1'
---
> Debug: Value '-30' for attribute id of vaporizer isn't valid
> Debug: Value '5' for attribute id of vaporizer isn't valid
> Debug: Value '5i' for attribute id of vaporizer isn't valid
25,26c17,19
< Debug: Setting previous attribute begin '5.00' into vaporizer 'gneE1'
< Debug: Setting previous attribute begin '5.00' into vaporizer 'gneE0'
---
> Debug: Removing vaporizer 'gneE1' in GNEChange_Additional
> Debug: Removed inspected element from Inspected ACs. 0 ACs remains.
> Debug: Removing vaporizer 'gneE0' in GNEChange_Additional
28,36d20
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into vaporizer 'gneE1'
< Debug: Setting previous attribute selected '0' into vaporizer 'gneE0'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE0_0togneE1_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements vaporizer inspect_selection end ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5,6c5,6
<     <vaporizer id="gneE0" begin="5.00" end="15.80"/>
<     <vaporizer id="gneE1" begin="5.00" end="15.80"/>
---
>     <vaporizer id="gneE0" begin="5.00" end="15.00"/>
>     <vaporizer id="gneE1" begin="1.00" end="15.00"/>
---------- Differences in errors ----------
12,23c12,15
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE1_0togneE0_0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE0_0togneE1_0'
< Debug: Setting new attribute selected 'true' into vaporizer 'gneE0'
< Debug: Setting new attribute selected 'true' into vaporizer 'gneE1'
< Debug: Value '-5' for attribute end of vaporizer isn't valid
< Debug: Value '1' for attribute end of vaporizer isn't valid
< Debug: Setting new attribute end '15.8' into vaporizer 'gneE0'
< Debug: Setting new attribute end '15.8' into vaporizer 'gneE1'
---
> Debug: Value '-5' for attribute begin of vaporizer isn't valid
> Debug: Setting new attribute begin '1' into vaporizer 'gneE1'
> Debug: Value '15.8' for attribute begin of vaporizer isn't valid
> Debug: Value '15.8i' for attribute begin of vaporizer isn't valid
26,27c18
< Debug: Setting previous attribute end '15.00' into vaporizer 'gneE1'
< Debug: Setting previous attribute end '15.00' into vaporizer 'gneE0'
---
> Debug: Setting previous attribute begin '5.00' into vaporizer 'gneE1'
30,37c21,23
< Debug: Setting previous attribute selected '0' into vaporizer 'gneE1'
< Debug: Setting previous attribute selected '0' into vaporizer 'gneE0'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE0_0togneE1_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE1_0togneE0_0'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements vaporizer inspect_selection name ( Last six runs Aug2020 Jul2020 )

---------- Differences in additionals ----------
5,6c5,6
<     <vaporizer id="gneE0" begin="5.00" end="15.00" name="customName"/>
<     <vaporizer id="gneE1" begin="5.00" end="15.00" name="customName"/>
---
>     <vaporizer id="gneE0" begin="5.00" end="15.00"/>
>     <vaporizer id="gneE1" begin="5.00" end="15.00"/>
---------- Differences in errors ----------
12,22c12,14
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE1_0togneE0_0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE0_0togneE1_0'
< Debug: Setting new attribute selected 'true' into vaporizer 'gneE0'
< Debug: Setting new attribute selected 'true' into vaporizer 'gneE1'
< Debug: Value '%%%$$' for attribute name of vaporizer isn't valid
< Debug: Setting new attribute name 'customName' into vaporizer 'gneE0'
< Debug: Setting new attribute name 'customName' into vaporizer 'gneE1'
---
> Debug: Value '%%%$$' for attribute end of vaporizer isn't valid
> Debug: Value 'customName' for attribute end of vaporizer isn't valid
> Debug: Value 'customNamei' for attribute end of vaporizer isn't valid
25,26c17,19
< Debug: Setting previous attribute name '' into vaporizer 'gneE1'
< Debug: Setting previous attribute name '' into vaporizer 'gneE0'
---
> Debug: Removing vaporizer 'gneE1' in GNEChange_Additional
> Debug: Removed inspected element from Inspected ACs. 0 ACs remains.
> Debug: Removing vaporizer 'gneE0' in GNEChange_Additional
28,36d20
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute selected '0' into vaporizer 'gneE1'
< Debug: Setting previous attribute selected '0' into vaporizer 'gneE0'
< Debug: Setting previous attribute selected '0' into connection 'fromgneE0_0togneE1_0'
< Debug: Setting previous attribute selected '0' into edge 'gneE0'
< Debug: Setting previous attribute selected '0' into junction 'gneJ1'
<truncated after showing first 30 lines>

TEST FAILED on ts-sim-winbuild-ba : additionalElements vaporizer inspect_selection parameters ( Last six runs Aug2020 Jul2020 )

---------- Differences in errors ----------
29,156c29
< Debug: Setting new attribute selected 'true' into junction 'gneJ0'
< Debug: Setting new attribute selected 'true' into edge 'gneE1'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE1_0togneE0_0'
< Debug: Setting new attribute selected 'true' into junction 'gneJ1'
< Debug: Setting new attribute selected 'true' into edge 'gneE0'
< Debug: Setting new attribute selected 'true' into connection 'fromgneE0_0togneE1_0'
< Debug: Setting new attribute selected 'true' into vaporizer 'gneE0'
< Debug: Setting new attribute selected 'true' into vaporizer 'gneE1'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into vaporizer 'gneE0'
< Debug: Setting new attribute genericParameter 'key1=value1|key2=value2|key3=value3' into vaporizer 'gneE1'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into vaporizer 'gneE0'
< Debug: Setting new attribute genericParameter 'key1=|key2=|key3=' into vaporizer 'gneE1'
< Debug: Setting new attribute genericParameter '' into vaporizer 'gneE0'
< Debug: Setting new attribute genericParameter '' into vaporizer 'gneE1'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into vaporizer 'gneE0'
< Debug: Setting new attribute genericParameter 'key1duplicated=value2|key3=value3' into vaporizer 'gneE1'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into vaporizer 'gneE0'
< Debug: Setting new attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into vaporizer 'gneE1'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into vaporizer 'gneE0'
< Debug: Setting new attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into vaporizer 'gneE1'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into vaporizer 'gneE0'
< Debug: Setting new attribute genericParameter 'keyFinal1=value1|keyFinal2=value2|keyFinal3=value3' into vaporizer 'gneE1'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into vaporizer 'gneE1'
< Debug: Setting previous attribute genericParameter 'key1=valueInvalid%;%$<>$$%|key2=value2|key3=value3' into vaporizer 'gneE0'
< Debug: Keys Ctrl+Z (Undo) pressed
< Debug: Calling GNEUndoList::undo()
< Debug: Setting previous attribute genericParameter 'key1=valueDuplicated|key2=valueDuplicated|key3=valueDuplicated' into vaporizer 'gneE1'
<truncated after showing first 30 lines>
---------- Differences in log ----------
1,3d0
< Warning: Invalid format of parameter (dummyGenericParameters)
< Warning: Invalid format of parameter (key1)
< Warning: Invalid format of parameter (keyInvalid.;%>%$$=value1)
---------- Differences in output ----------
17c17
< TestFunctions: Netedit closed successfully
---
> TestFunctions: Error closing Netedit
---------- Missing result in additionals ----------
<?xml version="1.0" encoding="UTF-8"?>


<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <vaporizer id="gneE0" begin="5.00" end="15.00">
        <param key="keyFinal1" value="value1"/>
        <param key="keyFinal2" value="value2"/>
        <param key="keyFinal3" value="value3"/>
    </vaporizer>
    <vaporizer id="gneE1" begin="5.00" end="15.00">
        <param key="keyFinal1" value="value1"/>
        <param key="keyFinal2" value="value2"/>
        <param key="keyFinal3" value="value3"/>
    </vaporizer>
</additional>
---------- Missing result in guisettingsoutput ----------
<viewsettings>
    <viewport zoom="100.00" x="25.00" y="0.00" angle="0.00"/>
</viewsettings>
---------- Missing result in net ----------
<?xml version="1.0" encoding="UTF-8"?>


<net version="1.6" junctionCornerDetail="5" limitTurnSpeed="5.50" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/net_file.xsd">

    <location netOffset="25.00,0.00" convBoundary="0.00,0.00,50.00,0.00" origBoundary="-10000000000.00,-10000000000.00,10000000000.00,10000000000.00" projParameter="!"/>

    <edge id=":gneJ0_0" function="internal">
        <lane id=":gneJ0_0_0" index="0" speed="3.65" length="4.67" shape="0.00,1.60 -1.20,0.80 -1.60,0.00 -1.20,-0.80 0.00,-1.60"/>
    </edge>
    <edge id=":gneJ1_0" function="internal">
        <lane id=":gneJ1_0_0" index="0" speed="3.65" length="4.67" shape="50.00,-1.60 51.20,-0.80 51.60,0.00 51.20,0.80 50.00,1.60"/>
    </edge>

    <edge id="gneE0" from="gneJ0" to="gneJ1" priority="1">
        <lane id="gneE0_0" index="0" speed="13.89" length="50.00" shape="0.00,-1.60 50.00,-1.60"/>
    </edge>
    <edge id="gneE1" from="gneJ1" to="gneJ0" priority="1">
        <lane id="gneE1_0" index="0" speed="13.89" length="50.00" shape="50.00,1.60 0.00,1.60"/>
    </edge>

    <tlLogic id="gneJ0" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>
    <tlLogic id="gneJ1" type="static" programID="0" offset="0">
        <phase duration="87" state="G"/>
        <phase duration="3"  state="y"/>
    </tlLogic>

<truncated after showing first 30 lines>

Detailed information for the tests that had known bugs:

8 TESTS had known bugs (Test needed #3045) on ts-sim-winbuild-ba :

#3045
(This bug was triggered by text found in file 'errors' matching 'python: can't open file 'test.py'')
---------- New result in errors ----------
python: can't open file 'test.py': [Errno 2] No such file or directory
additionalElements busstop create parkingLength ( Last six runs Aug2020 Jul2020 )
additionalElements busstop inspect parkingLength ( Last six runs Aug2020 Jul2020 )
additionalElements busstop inspect_selection parkingLength ( Last six runs Aug2020 Jul2020 )
additionalElements calibrator create id ( Last six runs Aug2020 Jul2020 )
additionalElements e2detector create id ( Last six runs Aug2020 Jul2020 )
additionalElements lanecalibrator create id ( Last six runs Aug2020 Jul2020 )
additionalElements parkingarea create id ( Last six runs Aug2020 Jul2020 )
additionalElements routeprobe create id ( Last six runs Aug2020 Jul2020 )