This class switches using the Stretch algorithm. More...

#include <MSTLLogicControl.h>

Inheritance diagram for MSTLLogicControl::WAUTSwitchProcedure_Stretch:

Collaboration diagram for MSTLLogicControl::WAUTSwitchProcedure_Stretch:

Data Structures
struct	StretchRange
	A definition of a stretch - Bereich. More...

Public Member Functions
virtual bool	trySwitch (SUMOTime step)
	Determines whether a switch is possible. More...

	WAUTSwitchProcedure_Stretch (MSTLLogicControl &control, WAUT &waut, MSTrafficLightLogic from, MSTrafficLightLogic to, bool synchron)
	Constructor. More...

	~WAUTSwitchProcedure_Stretch ()
	Destructor. More...

Protected Member Functions
void	adaptLogic (SUMOTime step)
	Determines the destination program's changes and applies them. More...

void	cutLogic (SUMOTime step, SUMOTime startPos, SUMOTime allCutTime)
	Cuts the logic to synchronize. More...

SUMOTime	getDiffToStartOfPhase (MSTrafficLightLogic &logic, SUMOTime toTime)
	Returns the difference between a given time and the start of the phase. More...

SUMOTime	getGSPTime (const MSTrafficLightLogic &logic) const
	Returns the GSP-value. More...

bool	isPosAtGSP (SUMOTime currentTime, const MSTrafficLightLogic &logic)
	Checks, whether the position of a signal programm is at the GSP ("Good Switching Point") More...

void	stretchLogic (SUMOTime step, SUMOTime startPos, SUMOTime allStretchTime)
	Stretches the logic to synchronize. More...

void	switchToPos (SUMOTime simStep, MSTrafficLightLogic &logic, SUMOTime toTime)
	switches the given logic directly to the given position More...

Protected Attributes
MSTLLogicControl &	myControl
	The control the logic belongs to. More...

MSTrafficLightLogic *	myFrom
	The current program of the tls to switch. More...

std::vector< StretchRange >	myStretchRanges
	the given Stretch-areas for the "to" program, this is 0-based indexed, while the input is 1-based More...

bool	mySwitchSynchron
	Information whether to switch synchron (?) More...

MSTrafficLightLogic *	myTo
	The program to switch the tls to. More...

WAUT &	myWAUT
	The WAUT responsible for switching. More...

Detailed Description

This class switches using the Stretch algorithm.

Definition at line 671 of file MSTLLogicControl.h.

Constructor & Destructor Documentation

◆ WAUTSwitchProcedure_Stretch()

MSTLLogicControl::WAUTSwitchProcedure_Stretch::WAUTSwitchProcedure_Stretch	(	MSTLLogicControl &	control,
		WAUT &	waut,
		MSTrafficLightLogic *	from,
		MSTrafficLightLogic *	to,
		bool	synchron
	)

Constructor.

Parameters

[in]	control	The responsible tls control
[in]	waut	The WAUT to switch
[in]	from	The original tls program
[in]	to	The destination tls program
[in]	synchron	Whether the switch shall be done in synchronuous mode

Definition at line 372 of file MSTLLogicControl.cpp.

References MSTLLogicControl::WAUTSwitchProcedure_Stretch::StretchRange::begin, MSTLLogicControl::WAUTSwitchProcedure_Stretch::StretchRange::end, MSTLLogicControl::WAUTSwitchProcedure_Stretch::StretchRange::fac, Parameterised::getParameter(), Parameterised::hasParameter(), myStretchRanges, MSTLLogicControl::WAUTSwitchProcedure::myTo, string2time(), StringUtils::toDouble(), and toString().

◆ ~WAUTSwitchProcedure_Stretch()

MSTLLogicControl::WAUTSwitchProcedure_Stretch::~WAUTSwitchProcedure_Stretch ( )

Destructor.

Definition at line 388 of file MSTLLogicControl.cpp.

Member Function Documentation

◆ adaptLogic()

void MSTLLogicControl::WAUTSwitchProcedure_Stretch::adaptLogic ( SUMOTime step )

protectedvirtual

Determines the destination program's changes and applies them.

Parameters

[in] step The current simulation step

See also: cutLogic; stretchLogic

Reimplemented from MSTLLogicControl::WAUTSwitchProcedure.

Definition at line 392 of file MSTLLogicControl.cpp.

References StringUtils::toDouble().

◆ cutLogic()

void MSTLLogicControl::WAUTSwitchProcedure_Stretch::cutLogic	(	SUMOTime	step,
		SUMOTime	startPos,
		SUMOTime	allCutTime
	)

protected

Cuts the logic to synchronize.

Parameters

[in]	step	The current simulation step
[in]	startPos	The position in the destination program to switch to
[in]	allCutTime	The amount by which the logic shall be cut

Definition at line 422 of file MSTLLogicControl.cpp.

References MIN2().

◆ getDiffToStartOfPhase()

SUMOTime MSTLLogicControl::WAUTSwitchProcedure::getDiffToStartOfPhase	(	MSTrafficLightLogic &	logic,
		SUMOTime	toTime
	)

protectedinherited

Returns the difference between a given time and the start of the phase.

Parameters

[in]	logic	The logic to consider
[in]	toTime	The time to ask for

Returns: How much time elapsed between the last pahse start and the given time

Definition at line 304 of file MSTLLogicControl.cpp.

References MSTrafficLightLogic::getIndexFromOffset(), and MSTrafficLightLogic::getOffsetFromIndex().

◆ getGSPTime()

SUMOTime MSTLLogicControl::WAUTSwitchProcedure::getGSPTime ( const MSTrafficLightLogic & logic ) const

protectedinherited

Returns the GSP-value.

The GSP must be given as a logic's parameter ("GSP").

Parameters

[in] logic The logic to retrieve the GSP from

Returns: The GSP value; 0 if not given.

See also: MSTrafficLightLogic::getParameterValue

Definition at line 290 of file MSTLLogicControl.cpp.

References Parameterised::getParameter(), and string2time().

◆ isPosAtGSP()

bool MSTLLogicControl::WAUTSwitchProcedure::isPosAtGSP	(	SUMOTime	currentTime,
		const MSTrafficLightLogic &	logic
	)

protectedinherited

Checks, whether the position of a signal programm is at the GSP ("Good Switching Point")

The GSP must be given as a logic's parameter ("GSP"). Not the simulation second, but the phase the GSP lies within is used. If the phase the GSP lies within is the same as the logic's current phase, the result is true.

Parameters

[in]	currentTime	The current time step
[in]	logic	The logic for which this should be examined

Returns: Whether the current step is the GSP

See also: getGSPValue

Definition at line 296 of file MSTLLogicControl.cpp.

References MSTrafficLightLogic::getCurrentPhaseIndex(), MSTrafficLightLogic::getDefaultCycleTime(), MSTrafficLightLogic::getOffsetFromIndex(), and MSTrafficLightLogic::getSpentDuration().

◆ stretchLogic()

void MSTLLogicControl::WAUTSwitchProcedure_Stretch::stretchLogic	(	SUMOTime	step,
		SUMOTime	startPos,
		SUMOTime	allStretchTime
	)

protected

Stretches the logic to synchronize.

Parameters

[in]	step	The current simulation step
[in]	startPos	The position in the destination program to switch to
[in]	allStretchTime	The amount by which the logic shall be streched

Definition at line 463 of file MSTLLogicControl.cpp.

References STEPS2TIME, TIME2STEPS, TL, StringUtils::toDouble(), toString(), and WRITE_WARNINGF.

◆ switchToPos()

void MSTLLogicControl::WAUTSwitchProcedure::switchToPos	(	SUMOTime	simStep,
		MSTrafficLightLogic &	logic,
		SUMOTime	toTime
	)

protectedinherited

switches the given logic directly to the given position

Parameters

[in]	simStep	The current simulation time
[in]	logic	The logic to switch
[in]	toTime	The time offset within the logic's phases to switch to

Definition at line 313 of file MSTLLogicControl.cpp.

References MSTrafficLightLogic::changeStepAndDuration(), MSPhaseDefinition::duration, MSTrafficLightLogic::getIndexFromOffset(), and MSTrafficLightLogic::getPhase().

◆ trySwitch()

bool MSTLLogicControl::WAUTSwitchProcedure::trySwitch ( SUMOTime step )

virtualinherited

Determines whether a switch is possible.

Parameters

[in] step The current simulation step

Returns: If a switch shall be done, this method should return true.

Reimplemented in MSTLLogicControl::WAUTSwitchProcedure_JustSwitch.

Definition at line 272 of file MSTLLogicControl.cpp.

Referenced by MSTLLogicControl::check2Switch().

Here is the caller graph for this function:

Field Documentation

◆ myControl

MSTLLogicControl& MSTLLogicControl::WAUTSwitchProcedure::myControl

protectedinherited

The control the logic belongs to.

Definition at line 596 of file MSTLLogicControl.h.

◆ myFrom

MSTrafficLightLogic* MSTLLogicControl::WAUTSwitchProcedure::myFrom

protectedinherited

The current program of the tls to switch.

Definition at line 584 of file MSTLLogicControl.h.

◆ myStretchRanges

std::vector<StretchRange> MSTLLogicControl::WAUTSwitchProcedure_Stretch::myStretchRanges

protected

the given Stretch-areas for the "to" program, this is 0-based indexed, while the input is 1-based

Definition at line 724 of file MSTLLogicControl.h.

Referenced by WAUTSwitchProcedure_Stretch().

◆ mySwitchSynchron

bool MSTLLogicControl::WAUTSwitchProcedure::mySwitchSynchron

protectedinherited

Information whether to switch synchron (?)

Definition at line 590 of file MSTLLogicControl.h.

◆ myTo

MSTrafficLightLogic* MSTLLogicControl::WAUTSwitchProcedure::myTo

protectedinherited

The program to switch the tls to.

Definition at line 587 of file MSTLLogicControl.h.

Referenced by WAUTSwitchProcedure_Stretch().

◆ myWAUT

WAUT& MSTLLogicControl::WAUTSwitchProcedure::myWAUT

protectedinherited

The WAUT responsible for switching.

Definition at line 593 of file MSTLLogicControl.h.

The documentation for this class was generated from the following files:

Data Structures

Public Member Functions

Protected Member Functions

Protected Attributes

Detailed Description

Constructor & Destructor Documentation

◆ WAUTSwitchProcedure_Stretch()

◆ ~WAUTSwitchProcedure_Stretch()

Member Function Documentation

◆ adaptLogic()

◆ cutLogic()

◆ getDiffToStartOfPhase()

◆ getGSPTime()

◆ isPosAtGSP()

◆ stretchLogic()

◆ switchToPos()

◆ trySwitch()

Field Documentation

◆ myControl

◆ myFrom

◆ myStretchRanges

◆ mySwitchSynchron

◆ myTo

◆ myWAUT