#include <AdditionalHandler.h>

Inheritance diagram for AdditionalHandler:

Collaboration diagram for AdditionalHandler:

Public Member Functions
	AdditionalHandler ()
	Constructor.

bool	beginParseAttributes (SumoXMLTag tag, const SUMOSAXAttributes &attrs)
	begin parse attributes

void	endParseAttributes ()
	end parse attributes

bool	isErrorCreatingElement () const
	get flag for mark if a element wasn't created

void	parseSumoBaseObject (CommonXMLStructure::SumoBaseObject *obj)
	parse SumoBaseObject (it's called recursivelly)

virtual bool	postParserTasks ()=0
	run post parser tasks

virtual	~AdditionalHandler ()
	Destructor.

build functions
virtual bool	buildBusStop (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const std::string &laneID, const double startPos, const double endPos, const std::string &name, const std::vector< std::string > &lines, const int personCapacity, const double parkingLength, const RGBColor &color, const bool friendlyPosition, const Parameterised::Map &parameters)=0
	Builds a bus stop.

virtual bool	buildTrainStop (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const std::string &laneID, const double startPos, const double endPos, const std::string &name, const std::vector< std::string > &lines, const int personCapacity, const double parkingLength, const RGBColor &color, const bool friendlyPosition, const Parameterised::Map &parameters)=0
	Builds a train stop.

virtual bool	buildAccess (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &laneID, const std::string &pos, const double length, const bool friendlyPos, const Parameterised::Map &parameters)=0
	Builds an Access.

virtual bool	buildContainerStop (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const std::string &laneID, const double startPos, const double endPos, const std::string &name, const std::vector< std::string > &lines, const int containerCapacity, const double parkingLength, const RGBColor &color, const bool friendlyPosition, const Parameterised::Map &parameters)=0
	Builds a container stop.

virtual bool	buildChargingStation (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const std::string &laneID, const double startPos, const double endPos, const std::string &name, const double chargingPower, const double efficiency, const bool chargeInTransit, const SUMOTime chargeDelay, const std::string &chargeType, const SUMOTime waitingTime, const bool friendlyPosition, const std::string &parkingAreaID, const Parameterised::Map &parameters)=0
	Builds a charging Station.

virtual bool	buildParkingArea (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const std::string &laneID, const double startPos, const double endPos, const std::string &departPos, const std::string &name, const std::vector< std::string > &lines, const bool friendlyPosition, const int roadSideCapacity, const bool onRoad, const double width, const double length, const double angle, const bool lefthand, const Parameterised::Map &parameters)=0
	Builds a Parking Area.

virtual bool	buildParkingSpace (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const double x, const double y, const double z, const std::string &name, const std::string &width, const std::string &length, const std::string &angle, const double slope, const Parameterised::Map &parameters)=0
	Builds a Parking Space.

virtual bool	buildE1Detector (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const std::string &laneID, const double position, const SUMOTime period, const std::string &file, const std::vector< std::string > &vehicleTypes, const std::vector< std::string > &nextEdges, const std::string &detectPersons, const std::string &name, const bool friendlyPos, const Parameterised::Map &parameters)=0
	Builds a induction loop detector (E1)

virtual bool	buildSingleLaneDetectorE2 (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const std::string &laneID, const double pos, const double length, const SUMOTime period, const std::string &trafficLight, const std::string &filename, const std::vector< std::string > &vehicleTypes, const std::vector< std::string > &nextEdges, const std::string &detectPersons, const std::string &name, const SUMOTime timeThreshold, const double speedThreshold, const double jamThreshold, const bool friendlyPos, const bool show, const Parameterised::Map &parameters)=0
	Builds a single-lane Area Detector (E2)

virtual bool	buildMultiLaneDetectorE2 (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const std::vector< std::string > &laneIDs, const double pos, const double endPos, const SUMOTime period, const std::string &trafficLight, const std::string &filename, const std::vector< std::string > &vehicleTypes, const std::vector< std::string > &nextEdges, const std::string &detectPersons, const std::string &name, const SUMOTime timeThreshold, const double speedThreshold, const double jamThreshold, const bool friendlyPos, const bool show, const Parameterised::Map &parameters)=0
	Builds a multi-lane Area Detector (E2)

virtual bool	buildDetectorE3 (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const Position &pos, const SUMOTime period, const std::string &filename, const std::vector< std::string > &vehicleTypes, const std::vector< std::string > &nextEdges, const std::string &detectPersons, const std::string &name, const SUMOTime timeThreshold, const double speedThreshold, const bool openEntry, const bool expectedArrival, const Parameterised::Map &parameters)=0
	Builds a multi entry exit detector (E3)

virtual bool	buildDetectorEntry (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &laneID, const double pos, const bool friendlyPos, const Parameterised::Map &parameters)=0
	Builds a entry detector (E3)

virtual bool	buildDetectorExit (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &laneID, const double pos, const bool friendlyPos, const Parameterised::Map &parameters)=0
	Builds a exit detector (E3)

virtual bool	buildDetectorE1Instant (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const std::string &laneID, const double pos, const std::string &filename, const std::vector< std::string > &vehicleTypes, const std::vector< std::string > &nextEdges, const std::string &detectPersons, const std::string &name, const bool friendlyPos, const Parameterised::Map &parameters)=0
	Builds a Instant Induction Loop Detector (E1Instant)

virtual bool	buildLaneCalibrator (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const std::string &laneID, const double pos, const std::string &name, const std::string &outfile, const SUMOTime period, const std::string &routeprobe, const double jamThreshold, const std::vector< std::string > &vTypes, const Parameterised::Map &parameters)=0
	builds a microscopic calibrator over a lane

virtual bool	buildEdgeCalibrator (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const std::string &edgeID, const double pos, const std::string &name, const std::string &outfile, const SUMOTime period, const std::string &routeprobe, const double jamThreshold, const std::vector< std::string > &vTypes, const Parameterised::Map &parameters)=0
	builds a microscopic calibrator over an edge

virtual bool	buildCalibratorFlow (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const SUMOVehicleParameter &vehicleParameter)=0
	builds a calibrator flow

virtual bool	buildRerouter (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const Position &pos, const std::vector< std::string > &edgeIDs, const double prob, const std::string &name, const bool off, const bool optional, const SUMOTime timeThreshold, const std::vector< std::string > &vTypes, const Parameterised::Map &parameters)=0
	builds a rerouter

virtual bool	buildRerouterInterval (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const SUMOTime begin, const SUMOTime end)=0
	builds a rerouter interval

virtual bool	buildClosingLaneReroute (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &closedLane, SVCPermissions permissions)=0
	builds a closing lane reroute

virtual bool	buildClosingReroute (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &closedEdgeID, SVCPermissions permissions)=0
	builds a closing edge reroute

virtual bool	buildDestProbReroute (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &newEdgeDestinationID, const double probability)=0
	builds a dest prob reroute

virtual bool	buildParkingAreaReroute (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &newParkignAreaID, const double probability, const bool visible)=0
	builds a parking area reroute

virtual bool	buildRouteProbReroute (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &newRouteID, const double probability)=0
	builds a route prob reroute

virtual bool	buildRouteProbe (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const std::string &edgeID, const SUMOTime period, const std::string &name, const std::string &file, const SUMOTime begin, const std::vector< std::string > &vTypes, const Parameterised::Map &parameters)=0
	builds a Route probe

virtual bool	buildVariableSpeedSign (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const Position &pos, const std::vector< std::string > &laneIDs, const std::string &name, const std::vector< std::string > &vTypes, const Parameterised::Map &parameters)=0
	Builds a VariableSpeedSign (lane speed additional)

virtual bool	buildVariableSpeedSignStep (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const SUMOTime time, const std::string &speed)=0
	Builds a VariableSpeedSign Step.

virtual bool	buildVaporizer (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &edgeID, const SUMOTime from, const SUMOTime endTime, const std::string &name, const Parameterised::Map &parameters)=0
	Builds a vaporizer (lane speed additional)

virtual bool	buildTAZ (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const PositionVector &shape, const Position &center, const bool fill, const RGBColor &color, const std::vector< std::string > &edgeIDs, const std::string &name, const Parameterised::Map &parameters)=0
	Builds a TAZ (Traffic Assignment Zone)

virtual bool	buildTAZSource (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &edgeID, const double departWeight)=0
	Builds a TAZSource (Traffic Assignment Zone)

virtual bool	buildTAZSink (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &edgeID, const double arrivalWeight)=0
	Builds a TAZSink (Traffic Assignment Zone)

virtual bool	buildTractionSubstation (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const Position &pos, const double voltage, const double currentLimit, const Parameterised::Map &parameters)=0
	build traction substation

virtual bool	buildOverheadWire (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const std::string &substationId, const std::vector< std::string > &laneIDs, const double startPos, const double endPos, const bool friendlyPos, const std::vector< std::string > &forbiddenInnerLanes, const Parameterised::Map &parameters)=0
	build overhead wire

virtual bool	buildOverheadWireClamp (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const std::string &overheadWireIDStartClamp, const std::string &laneIDStartClamp, const std::string &overheadWireIDEndClamp, const std::string &laneIDEndClamp, const Parameterised::Map &parameters)=0
	build overhead wire clamp

virtual bool	buildPolygon (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const std::string &type, const RGBColor &color, const double layer, const double angle, const std::string &imgFile, const bool relativePath, const PositionVector &shape, const bool geo, const bool fill, const double lineWidth, const std::string &name, const Parameterised::Map &parameters)=0
	Builds a polygon using the given values.

virtual bool	buildPOI (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const std::string &type, const RGBColor &color, const double x, const double y, const std::string &icon, const double layer, const double angle, const std::string &imgFile, bool relativePath, const double width, const double height, const std::string &name, const Parameterised::Map &parameters)=0
	Builds a POI using the given values.

virtual bool	buildPOILane (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const std::string &type, const RGBColor &color, const std::string &laneID, const double posOverLane, const bool friendlyPosition, const double posLat, const std::string &icon, const double layer, const double angle, const std::string &imgFile, const bool relativePath, const double width, const double height, const std::string &name, const Parameterised::Map &parameters)=0
	Builds a POI over lane using the given values.

virtual bool	buildPOIGeo (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const std::string &type, const RGBColor &color, const double lon, const double lat, const std::string &icon, const double layer, const double angle, const std::string &imgFile, bool relativePath, const double width, const double height, const std::string &name, const Parameterised::Map &parameters)=0
	Builds a POI in GEO coordinaten using the given values.

virtual bool	buildJpsWalkableArea (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const PositionVector &shape, bool geo, const std::string &name, const Parameterised::Map &parameters)=0
	Builds a JuPedSim walkable area using the given values.

virtual bool	buildJpsObstacle (const CommonXMLStructure::SumoBaseObject *sumoBaseObject, const std::string &id, const PositionVector &shape, bool geo, const std::string &name, const Parameterised::Map &parameters)=0
	Builds a JuPedSim obstacle using the given values.

Protected Member Functions
void	parseParameters (const SUMOSAXAttributes &attrs)
	parse generic parameters

bool	writeError (const std::string &error)
	write error and enable error creating element

bool	writeErrorDuplicated (const SumoXMLTag tag, const std::string &id, const SumoXMLTag checkedTag)
	write error "duplicated additional"

bool	writeErrorInvalidDistribution (const SumoXMLTag tag, const std::string &id)
	write error "invalid distribution"

bool	writeErrorInvalidLanes (const SumoXMLTag tag, const std::string &id)
	write error "invalid list of lanes"

bool	writeErrorInvalidParent (const SumoXMLTag tag, const std::string &id, const SumoXMLTag parentTag, const std::string &parentID)
	write error "invalid parent element" giving ids of current and parent element

bool	writeErrorInvalidParent (const SumoXMLTag tag, const SumoXMLTag parentTag)
	write error "invalid parent element" without giving IDs

bool	writeErrorInvalidParent (const SumoXMLTag tag, const SumoXMLTag parentTag, const std::string &parentID)
	write error "invalid parent element" giving only the id of parent element

bool	writeErrorInvalidPosition (const SumoXMLTag tag, const std::string &id)
	write error "invalid position"

check functions
check parsed parents
void	checkParsedParent (const SumoXMLTag currentTag, const std::vector< SumoXMLTag > &parentTags, bool &ok)

bool	checkListOfVehicleTypes (const SumoXMLTag tag, const std::string &id, const std::vector< std::string > &vTypeIDs)
	check list of IDs

bool	checkNegative (const SumoXMLTag tag, const std::string &id, const SumoXMLAttr attribute, const int value, const bool canBeZero)
	check if the given int value is NOT negative

bool	checkNegative (const SumoXMLTag tag, const std::string &id, const SumoXMLAttr attribute, const double value, const bool canBeZero)
	check if the given double value is NOT negative

bool	checkNegative (const SumoXMLTag tag, const std::string &id, const SumoXMLAttr attribute, const SUMOTime value, const bool canBeZero)
	check if the given SUMOTime value is NOT negative

bool	checkFileName (const SumoXMLTag tag, const std::string &id, const SumoXMLAttr attribute, const std::string &value)
	check if the given filename is valid

bool	checkValidAdditionalID (const SumoXMLTag tag, const std::string &value)
	check if the given additional ID is valid

bool	checkValidDetectorID (const SumoXMLTag tag, const std::string &value)
	check if the given detector ID is valid

bool	checkValidDemandElementID (const SumoXMLTag tag, const std::string &value)
	check if the given demand elmement ID is valid

Protected Attributes
CommonXMLStructure	myCommonXMLStructure
	common XML Structure

bool	myErrorCreatingElement = false
	flag for mark if a element wasn't created

Private Member Functions
	AdditionalHandler (const AdditionalHandler &s)=delete
	invalidate copy constructor

bool	checkCalibratorFlowParents ()
	check calibrator flow parents

bool	checkDetectPersons (const SumoXMLTag currentTag, const std::string &id, const std::string &detectPersons)
	check detect persons

AdditionalHandler &	operator= (const AdditionalHandler &s)=delete
	invalidate assignment operator

parse additional attributes
parse busStop attributes
void	parseBusStopAttributes (const SUMOSAXAttributes &attrs)

void	parseTrainStopAttributes (const SUMOSAXAttributes &attrs)
	parse trainStop attributes

void	parseAccessAttributes (const SUMOSAXAttributes &attrs)
	parse access attributes

void	parseContainerStopAttributes (const SUMOSAXAttributes &attrs)
	parse containerStop attributes

void	parseChargingStationAttributes (const SUMOSAXAttributes &attrs)
	parse chargingStation attributes

void	parseParkingAreaAttributes (const SUMOSAXAttributes &attrs)
	parse parking area attributes

void	parseParkingSpaceAttributes (const SUMOSAXAttributes &attrs)
	parse parking space attributes

void	parseE1Attributes (const SUMOSAXAttributes &attrs)
	parse E1 attributes

void	parseE2Attributes (const SUMOSAXAttributes &attrs)
	parse E2 attributes

void	parseE3Attributes (const SUMOSAXAttributes &attrs)
	parse E3 attributes

void	parseEntryAttributes (const SUMOSAXAttributes &attrs)
	parse entry attributes

void	parseExitAttributes (const SUMOSAXAttributes &attrs)
	parse exist attributes

void	parseE1InstantAttributes (const SUMOSAXAttributes &attrs)
	parse E1 instant attributes

void	parseTAZAttributes (const SUMOSAXAttributes &attrs)
	parse TAZ attributes

void	parseTAZSourceAttributes (const SUMOSAXAttributes &attrs)
	parse TAZ source attributes

void	parseTAZSinkAttributes (const SUMOSAXAttributes &attrs)
	parse TAZ sink attributes

void	parseVariableSpeedSignAttributes (const SUMOSAXAttributes &attrs)
	parse variable speed sign attributes

void	parseVariableSpeedSignStepAttributes (const SUMOSAXAttributes &attrs)
	parse variable speed sign step attributes

void	parseCalibratorAttributes (const SUMOSAXAttributes &attrs)
	parse calibrator attributes

void	parseCalibratorFlowAttributes (const SUMOSAXAttributes &attrs)
	parse calibrator flow attributes

void	parseRerouterAttributes (const SUMOSAXAttributes &attrs)
	parse rerouter attributes

void	parseRerouterIntervalAttributes (const SUMOSAXAttributes &attrs)
	parse rerouter interval attributes

void	parseClosingLaneRerouteAttributes (const SUMOSAXAttributes &attrs)
	parse closing lane reroute attributes

void	parseClosingRerouteAttributes (const SUMOSAXAttributes &attrs)
	parse closing reroute attributes

void	parseDestProbRerouteAttributes (const SUMOSAXAttributes &attrs)
	parse dest prob reroute attributes

void	parseParkingAreaRerouteAttributes (const SUMOSAXAttributes &attrs)
	parse parking area reroute attributes

void	parseRouteProbRerouteAttributes (const SUMOSAXAttributes &attrs)
	parse route prob reroute attributes

void	parseRouteProbeAttributes (const SUMOSAXAttributes &attrs)
	parse route probe attributes

void	parseVaporizerAttributes (const SUMOSAXAttributes &attrs)
	parse vaporizer attributes

void	parseTractionSubstation (const SUMOSAXAttributes &attrs)
	parse traction substation

void	parseOverheadWire (const SUMOSAXAttributes &attrs)
	parse overhead wire segment

void	parseOverheadWireClamp (const SUMOSAXAttributes &attrs)
	parse overhead wire clamp

void	parsePolyAttributes (const SUMOSAXAttributes &attrs)

void	parsePOIAttributes (const SUMOSAXAttributes &attrs)
	parse POI attributes

void	parseJpsWalkableAreaAttributes (const SUMOSAXAttributes &attrs)
	parse juPedSim walkable area attributes

void	parseJpsObstacleAttributes (const SUMOSAXAttributes &attrs)
	parse juPedSim obstacle attributes

Detailed Description

Definition at line 29 of file AdditionalHandler.h.

Constructor & Destructor Documentation

◆ AdditionalHandler() [1/2]

AdditionalHandler::AdditionalHandler ( )

Constructor.

Definition at line 37 of file AdditionalHandler.cpp.

◆ ~AdditionalHandler()

AdditionalHandler::~AdditionalHandler ( )

virtual

Destructor.

Definition at line 40 of file AdditionalHandler.cpp.

◆ AdditionalHandler() [2/2]

AdditionalHandler::AdditionalHandler ( const AdditionalHandler & s )

privatedelete

invalidate copy constructor

Member Function Documentation

◆ beginParseAttributes()

bool AdditionalHandler::beginParseAttributes	(	SumoXMLTag	tag,
		const SUMOSAXAttributes &	attrs
	)

begin parse attributes

Definition at line 44 of file AdditionalHandler.cpp.

References CommonXMLStructure::abortSUMOBaseOBject(), GNE_TAG_CALIBRATOR_LANE, GNE_TAG_JPS_OBSTACLE, GNE_TAG_JPS_WALKABLEAREA, CommonHandler::myCommonXMLStructure, CommonXMLStructure::openSUMOBaseOBject(), parseAccessAttributes(), parseBusStopAttributes(), parseCalibratorAttributes(), parseCalibratorFlowAttributes(), parseChargingStationAttributes(), parseClosingLaneRerouteAttributes(), parseClosingRerouteAttributes(), parseContainerStopAttributes(), parseDestProbRerouteAttributes(), parseE1Attributes(), parseE1InstantAttributes(), parseE2Attributes(), parseE3Attributes(), parseEntryAttributes(), parseExitAttributes(), parseJpsObstacleAttributes(), parseJpsWalkableAreaAttributes(), parseOverheadWire(), parseOverheadWireClamp(), CommonHandler::parseParameters(), parseParkingAreaAttributes(), parseParkingAreaRerouteAttributes(), parseParkingSpaceAttributes(), parsePOIAttributes(), parsePolyAttributes(), parseRerouterAttributes(), parseRerouterIntervalAttributes(), parseRouteProbeAttributes(), parseRouteProbRerouteAttributes(), parseTAZAttributes(), parseTAZSinkAttributes(), parseTAZSourceAttributes(), parseTractionSubstation(), parseTrainStopAttributes(), parseVaporizerAttributes(), parseVariableSpeedSignAttributes(), parseVariableSpeedSignStepAttributes(), SUMO_TAG_ACCESS, SUMO_TAG_BUS_STOP, SUMO_TAG_CALIBRATOR, SUMO_TAG_CHARGING_STATION, SUMO_TAG_CLOSING_LANE_REROUTE, SUMO_TAG_CLOSING_REROUTE, SUMO_TAG_CONTAINER_STOP, SUMO_TAG_DEST_PROB_REROUTE, SUMO_TAG_DET_ENTRY, SUMO_TAG_DET_EXIT, SUMO_TAG_E1DETECTOR, SUMO_TAG_E2DETECTOR, SUMO_TAG_E3DETECTOR, SUMO_TAG_ENTRY_EXIT_DETECTOR, SUMO_TAG_FLOW, SUMO_TAG_INDUCTION_LOOP, SUMO_TAG_INSTANT_INDUCTION_LOOP, SUMO_TAG_INTERVAL, SUMO_TAG_LANE_AREA_DETECTOR, SUMO_TAG_OVERHEAD_WIRE_CLAMP, SUMO_TAG_OVERHEAD_WIRE_SECTION, SUMO_TAG_PARAM, SUMO_TAG_PARKING_AREA, SUMO_TAG_PARKING_AREA_REROUTE, SUMO_TAG_PARKING_SPACE, SUMO_TAG_POI, SUMO_TAG_POLY, SUMO_TAG_REROUTER, SUMO_TAG_ROUTE_PROB_REROUTE, SUMO_TAG_ROUTEPROBE, SUMO_TAG_STEP, SUMO_TAG_TAZ, SUMO_TAG_TAZSINK, SUMO_TAG_TAZSOURCE, SUMO_TAG_TRACTION_SUBSTATION, SUMO_TAG_TRAIN_STOP, SUMO_TAG_VAPORIZER, SUMO_TAG_VSS, and CommonHandler::writeError().

Referenced by GNEGeneralHandler::beginTag().

Here is the caller graph for this function:

◆ buildAccess()

virtual bool AdditionalHandler::buildAccess	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	laneID,
		const std::string &	pos,
		const double	length,
		const bool	friendlyPos,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds an Access.

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	busStop	GNEAdditional of this Access belongs
[in]	laneID	The lane the Access is placed on
[in]	pos	position of the Access on the lane
	[in[	length length of the Access
[in]	friendlyPos	enable or disable friendly position
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildBusStop()

virtual bool AdditionalHandler::buildBusStop	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const std::string &	laneID,
		const double	startPos,
		const double	endPos,
		const std::string &	name,
		const std::vector< std::string > &	lines,
		const int	personCapacity,
		const double	parkingLength,
		const RGBColor &	color,
		const bool	friendlyPosition,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a bus stop.

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	id	The id of the bus stop
[in]	laneID	The lane the bus stop is placed on
[in]	startPos	Begin position of the bus stop on the lane
[in]	endPos	End position of the bus stop on the lane
[in]	name	Name of busStop
[in]	lines	Names of the bus lines that halt on this bus stop
[in]	personCapacity	larger numbers of persons trying to enter will create an upstream jam on the sidewalk.
[in]	parkingLength	parking length
	[in[	color busStop color
[in]	friendlyPos	enable or disable friendly position
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildCalibratorFlow()

virtual bool AdditionalHandler::buildCalibratorFlow	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const SUMOVehicleParameter &	vehicleParameter
	)

pure virtual

builds a calibrator flow

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	vehicleParameter	calibratorFlow parameter

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildChargingStation()

virtual bool AdditionalHandler::buildChargingStation	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const std::string &	laneID,
		const double	startPos,
		const double	endPos,
		const std::string &	name,
		const double	chargingPower,
		const double	efficiency,
		const bool	chargeInTransit,
		const SUMOTime	chargeDelay,
		const std::string &	chargeType,
		const SUMOTime	waitingTime,
		const bool	friendlyPosition,
		const std::string &	parkingAreaID,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a charging Station.

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	id	The id of the charging Station
[in]	laneID	The lane the charging Station is placed on
[in]	startPos	Begin position of the charging Station on the lane
[in]	endPos	End position of the charging Station on the lane
[in]	name	Name of charging station
[in]	chargingPower	power charged in every timeStep
[in]	efficiency	efficiency of the charge
[in]	chargeInTransit	enable or disable charge in transit
[in]	chargeDelay	delay in the charge
[in]	chargeType	charge type (normal, electric or fuel)
[in]	waitingTime	waiting time until start charging
[in]	friendlyPos	enable or disable friendly position
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildClosingLaneReroute()

virtual bool AdditionalHandler::buildClosingLaneReroute	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	closedLane,
		SVCPermissions	permissions
	)

pure virtual

builds a closing lane reroute

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	closedLane	closed lane
[in]	permissions	vClasses disallowed for the lane

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildClosingReroute()

virtual bool AdditionalHandler::buildClosingReroute	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	closedEdgeID,
		SVCPermissions	permissions
	)

pure virtual

builds a closing edge reroute

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	closedEdgeID	closed edge
[in]	permissions	vClasses disallowed for the lane

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildContainerStop()

virtual bool AdditionalHandler::buildContainerStop	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const std::string &	laneID,
		const double	startPos,
		const double	endPos,
		const std::string &	name,
		const std::vector< std::string > &	lines,
		const int	containerCapacity,
		const double	parkingLength,
		const RGBColor &	color,
		const bool	friendlyPosition,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a container stop.

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	id	The id of the container stop
[in]	laneID	The lane the container stop is placed on
[in]	startPos	Begin position of the container stop on the lane
[in]	endPos	End position of the container stop on the lane
[in]	name	Name of container stop
[in]	lines	Names of the bus lines that halt on this container stop
[in]	containerCapacity	larger numbers of containers
[in]	parkingLength	parking length
	[in[	color containerStop color
[in]	friendlyPos	enable or disable friendly position
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildDestProbReroute()

virtual bool AdditionalHandler::buildDestProbReroute	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	newEdgeDestinationID,
		const double	probability
	)

pure virtual

builds a dest prob reroute

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	newEdgeDestinationID	new edge destination ID
[in]	probability	rerouting probability

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildDetectorE1Instant()

virtual bool AdditionalHandler::buildDetectorE1Instant	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const std::string &	laneID,
		const double	pos,
		const std::string &	filename,
		const std::vector< std::string > &	vehicleTypes,
		const std::vector< std::string > &	nextEdges,
		const std::string &	detectPersons,
		const std::string &	name,
		const bool	friendlyPos,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a Instant Induction Loop Detector (E1Instant)

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	id	The id of the detector
[in]	laneID	The lane the detector is placed on
[in]	pos	position of the detector on the lane
[in]	filename	The path to the output file.
[in]	name	E2 detector name
[in]	vtypes	list of vehicle types to be reported
[in]	nextEdges	list of edge ids that must all be part of the future route of the vehicle to qualify for detection
[in]	detectPersons	detect persons instead of vehicles (pedestrians or passengers)
[in]	friendlyPos	enable or disable friendly position
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildDetectorE3()

virtual bool AdditionalHandler::buildDetectorE3	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const Position &	pos,
		const SUMOTime	period,
		const std::string &	filename,
		const std::vector< std::string > &	vehicleTypes,
		const std::vector< std::string > &	nextEdges,
		const std::string &	detectPersons,
		const std::string &	name,
		const SUMOTime	timeThreshold,
		const double	speedThreshold,
		const bool	openEntry,
		const bool	expectedArrival,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a multi entry exit detector (E3)

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	id	The id of the detector
[in]	pos	position of the detector in the map
[in]	period	the aggregation period the values the detector collects shall be summed up.
[in]	filename	The path to the output file.
[in]	vtypes	list of vehicle types to be reported
[in]	nextEdges	list of edge ids that must all be part of the future route of the vehicle to qualify for detection
[in]	detectPersons	detect persons instead of vehicles (pedestrians or passengers)
[in]	name	E2 detector name
[in]	timeThreshold	The time-based threshold that describes how much time has to pass until a vehicle is recognized as halting
[in]	speedThreshold	The speed-based threshold that describes how slow a vehicle has to be to be recognized as halting
[in]	openEntry	enable or disable open Entry
[in]	expectedArrival	Whether no warning should be issued when a vehicle arrives within the detector area
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildDetectorEntry()

virtual bool AdditionalHandler::buildDetectorEntry	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	laneID,
		const double	pos,
		const bool	friendlyPos,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a entry detector (E3)

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	laneID	The lane in which the entry detector is placed on
[in]	pos	position of the entry detector on the lane
[in]	friendlyPos	enable or disable friendly position
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildDetectorExit()

virtual bool AdditionalHandler::buildDetectorExit	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	laneID,
		const double	pos,
		const bool	friendlyPos,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a exit detector (E3)

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	laneID	The lane in which the exit detector is placed on
[in]	pos	position of the exit detector on the lane
[in]	friendlyPos	enable or disable friendly position
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildE1Detector()

virtual bool AdditionalHandler::buildE1Detector	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const std::string &	laneID,
		const double	position,
		const SUMOTime	period,
		const std::string &	file,
		const std::vector< std::string > &	vehicleTypes,
		const std::vector< std::string > &	nextEdges,
		const std::string &	detectPersons,
		const std::string &	name,
		const bool	friendlyPos,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a induction loop detector (E1)

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	id	The id of the detector
[in]	laneID	The lane the detector is placed on
[in]	pos	position of the detector on the lane
[in]	period	the aggregation period the values the detector collects shall be summed up.
[in]	filename	The path to the output file.
[in]	vtypes	list of vehicle types to be reported
[in]	nextEdges	list of edge ids that must all be part of the future route of the vehicle to qualify for detection
[in]	detectPersons	detect persons instead of vehicles (pedestrians or passengers)
[in]	name	E1 detector name
[in]	friendlyPos	enable or disable friendly position
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildEdgeCalibrator()

virtual bool AdditionalHandler::buildEdgeCalibrator	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const std::string &	edgeID,
		const double	pos,
		const std::string &	name,
		const std::string &	outfile,
		const SUMOTime	period,
		const std::string &	routeprobe,
		const double	jamThreshold,
		const std::vector< std::string > &	vTypes,
		const Parameterised::Map &	parameters
	)

pure virtual

builds a microscopic calibrator over an edge

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	id	The id of the calibrator
[in]	edgeID	The edge the calibrator is placed at
[in]	pos	The position on the edge the calibrator lies at
[in]	name	Calibrator name
[in]	outfile	te file in which write results
[in]	centerAfterCreation	center camera after creation
[in]	routeProbe	route probe vinculated with this calibrator
[in]	jamThreshold	A threshold value to detect and clear unexpected jamming
[in]	vTypes	space separated list of vehicle type ids to consider
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildJpsObstacle()

virtual bool AdditionalHandler::buildJpsObstacle	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const PositionVector &	shape,
		bool	geo,
		const std::string &	name,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a JuPedSim obstacle using the given values.

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	id	The name of the obstacle
[in]	shape	The shape of the obstacle
[in]	geo	specify if shape was loaded as GEO
[in]	name	obstacle name
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildJpsWalkableArea()

virtual bool AdditionalHandler::buildJpsWalkableArea	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const PositionVector &	shape,
		bool	geo,
		const std::string &	name,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a JuPedSim walkable area using the given values.

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	id	The name of the walkable area
[in]	shape	The shape of the walkable area
[in]	geo	specify if shape was loaded as GEO
[in]	name	walkable area name
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildLaneCalibrator()

virtual bool AdditionalHandler::buildLaneCalibrator	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const std::string &	laneID,
		const double	pos,
		const std::string &	name,
		const std::string &	outfile,
		const SUMOTime	period,
		const std::string &	routeprobe,
		const double	jamThreshold,
		const std::vector< std::string > &	vTypes,
		const Parameterised::Map &	parameters
	)

pure virtual

builds a microscopic calibrator over a lane

Parameters

[in]	id	The id of the calibrator
[in]	laneID	The lane the calibrator is placed at
[in]	pos	The position on the edge the calibrator lies at
[in]	name	Calibrator name
[in]	outfile	te file in which write results
[in]	jamThreshold	A threshold value to detect and clear unexpected jamming
[in]	vTypes	space separated list of vehicle type ids to consider
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildMultiLaneDetectorE2()

virtual bool AdditionalHandler::buildMultiLaneDetectorE2	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const std::vector< std::string > &	laneIDs,
		const double	pos,
		const double	endPos,
		const SUMOTime	period,
		const std::string &	trafficLight,
		const std::string &	filename,
		const std::vector< std::string > &	vehicleTypes,
		const std::vector< std::string > &	nextEdges,
		const std::string &	detectPersons,
		const std::string &	name,
		const SUMOTime	timeThreshold,
		const double	speedThreshold,
		const double	jamThreshold,
		const bool	friendlyPos,
		const bool	show,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a multi-lane Area Detector (E2)

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	id	The id of the detector
[in]	laneIDs	The lanes the detector is placed on
[in]	pos	position of the detector on the first lane
[in]	endPos	position of the detector on the last lane
[in]	period	the aggregation period the values the detector collects shall be summed up.
[in]	trafficLight	The traffic light that triggers aggregation when switching.
[in]	filename	The path to the output file.
[in]	vtypes	list of vehicle types to be reported
[in]	nextEdges	list of edge ids that must all be part of the future route of the vehicle to qualify for detection
[in]	detectPersons	detect persons instead of vehicles (pedestrians or passengers)
[in]	name	E2 detector name
[in]	timeThreshold	The time-based threshold that describes how much time has to pass until a vehicle is recognized as halting
[in]	speedThreshold	The speed-based threshold that describes how slow a vehicle has to be to be recognized as halting
[in]	jamThreshold	The minimum distance to the next standing vehicle in order to make this vehicle count as a participant to the jam
[in]	friendlyPos	enable or disable friendly position
[in]	show	detector in sumo-gui
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildOverheadWire()

virtual bool AdditionalHandler::buildOverheadWire	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const std::string &	substationId,
		const std::vector< std::string > &	laneIDs,
		const double	startPos,
		const double	endPos,
		const bool	friendlyPos,
		const std::vector< std::string > &	forbiddenInnerLanes,
		const Parameterised::Map &	parameters
	)

pure virtual

build overhead wire

Parameters

[in]	id	Overhead wire ID
[in]	lane	Lane over which the segment is placed
[in]	substationId	Substation to which the circuit is connected
[in]	laneIDs	list of consecutive lanes of the circuit
[in]	startPos	Starting position in the specified lane
[in]	endPos	Ending position in the specified lane
[in]	friendlyPos	enable or disable friendly position
[in]	forbiddenInnerLanes	Inner lanes, where placing of overhead wire is restricted
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildOverheadWireClamp()

virtual bool AdditionalHandler::buildOverheadWireClamp	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const std::string &	overheadWireIDStartClamp,
		const std::string &	laneIDStartClamp,
		const std::string &	overheadWireIDEndClamp,
		const std::string &	laneIDEndClamp,
		const Parameterised::Map &	parameters
	)

pure virtual

build overhead wire clamp

Parameters

[in]	id	Overhead wire clamp ID
[in]	overheadWireIDStartClamp	ID of the overhead wire segment, to the start of which the overhead wire clamp is connected
[in]	laneIDStartClamp	ID of the overhead wire segment lane of overheadWireIDStartClamp
[in]	overheadWireIDEndClamp	ID of the overhead wire segment, to the end of which the overhead wire clamp is connected
[in]	laneIDEndClamp	ID of the overhead wire segment lane of overheadWireIDEndClamp
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildParkingArea()

virtual bool AdditionalHandler::buildParkingArea	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const std::string &	laneID,
		const double	startPos,
		const double	endPos,
		const std::string &	departPos,
		const std::string &	name,
		const std::vector< std::string > &	lines,
		const bool	friendlyPosition,
		const int	roadSideCapacity,
		const bool	onRoad,
		const double	width,
		const double	length,
		const double	angle,
		const bool	lefthand,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a Parking Area.

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	id	The id of the Parking >Area
[in]	laneID	The lane the Parking Area is placed on
[in]	startPos	Begin position of the Parking Area on the lane
[in]	endPos	End position of the Parking Area on the lane
[in]	departPos	lane position in that vehicle must depart when leaves parkingArea
[in]	name	Name of Parking Area
[in]	friendlyPos	enable or disable friendly position
[in]	roadSideCapacity	road side capacity of ParkingArea
[in]	width	ParkingArea's width
[in]	length	ParkingArea's length
[in]	angle	ParkingArea's angle
[in]	lefthand	enable or disable lefthand
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildParkingAreaReroute()

virtual bool AdditionalHandler::buildParkingAreaReroute	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	newParkignAreaID,
		const double	probability,
		const bool	visible
	)

pure virtual

builds a parking area reroute

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	newParkignAreaID	new parkingArea ID
[in]	probability	rerouting probability

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildParkingSpace()

virtual bool AdditionalHandler::buildParkingSpace	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const double	x,
		const double	y,
		const double	z,
		const std::string &	name,
		const std::string &	width,
		const std::string &	length,
		const std::string &	angle,
		const double	slope,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a Parking Space.

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	x	Position X
[in]	y	Position Y
[in]	z	Position Z
[in]	name	Name of Parking Area
[in]	width	ParkingArea's width
[in]	length	ParkingArea's length
[in]	angle	ParkingArea's angle
[in]	slope	ParkingArea's slope (of this space)
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildPOI()

virtual bool AdditionalHandler::buildPOI	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const std::string &	type,
		const RGBColor &	color,
		const double	x,
		const double	y,
		const std::string &	icon,
		const double	layer,
		const double	angle,
		const std::string &	imgFile,
		bool	relativePath,
		const double	width,
		const double	height,
		const std::string &	name,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a POI using the given values.

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	id	The name of the POI
[in]	type	The (abstract) type of the POI
[in]	color	The color of the POI
[in]	x	POI's x position
[in]	y	POI's y position
[in]	icon	The icon of the POI
[in]	layer	The layer of the POI
[in]	angle	The rotation of the POI
[in]	imgFile	The raster image of the POI
[in]	relativePath	set image file as relative path
[in]	width	The width of the POI image
[in]	height	The height of the POI image
[in]	name	POI name
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildPOIGeo()

virtual bool AdditionalHandler::buildPOIGeo	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const std::string &	type,
		const RGBColor &	color,
		const double	lon,
		const double	lat,
		const std::string &	icon,
		const double	layer,
		const double	angle,
		const std::string &	imgFile,
		bool	relativePath,
		const double	width,
		const double	height,
		const std::string &	name,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a POI in GEO coordinaten using the given values.

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	id	The name of the POI
[in]	type	The (abstract) type of the POI
[in]	color	The color of the POI
[in]	lon	POI's longitud
[in]	lat	POI's latitud
[in]	icon	The icon of the POI
[in]	layer	The layer of the POI
[in]	angle	The rotation of the POI
[in]	imgFile	The raster image of the POI
[in]	relativePath	set image file as relative path
[in]	width	The width of the POI image
[in]	height	The height of the POI image
[in]	name	POI name
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildPOILane()

virtual bool AdditionalHandler::buildPOILane	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const std::string &	type,
		const RGBColor &	color,
		const std::string &	laneID,
		const double	posOverLane,
		const bool	friendlyPosition,
		const double	posLat,
		const std::string &	icon,
		const double	layer,
		const double	angle,
		const std::string &	imgFile,
		const bool	relativePath,
		const double	width,
		const double	height,
		const std::string &	name,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a POI over lane using the given values.

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	id	The name of the POI
[in]	type	The (abstract) type of the POI
[in]	color	The color of the POI
[in]	laneID	The Lane in which this POI is placed
[in]	posOverLane	The position over Lane
[in]	friendlyPos	enable or disable friendly position
[in]	posLat	The position lateral over Lane
[in]	icon	The icon of the POI
[in]	layer	The layer of the POI
[in]	angle	The rotation of the POI
[in]	imgFile	The raster image of the POI
[in]	relativePath	set image file as relative path
[in]	width	The width of the POI image
[in]	height	The height of the POI image
[in]	name	POI name
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildPolygon()

virtual bool AdditionalHandler::buildPolygon	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const std::string &	type,
		const RGBColor &	color,
		const double	layer,
		const double	angle,
		const std::string &	imgFile,
		const bool	relativePath,
		const PositionVector &	shape,
		const bool	geo,
		const bool	fill,
		const double	lineWidth,
		const std::string &	name,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a polygon using the given values.

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	id	The name of the polygon
[in]	type	The (abstract) type of the polygon
[in]	color	The color of the polygon
[in]	layer	The layer of the polygon
[in]	angle	The rotation of the polygon
[in]	imgFile	The raster image of the polygon
[in]	relativePath	set image file as relative path
[in]	shape	The shape of the polygon
[in]	geo	specify if shape was loaded as GEO coordinate
[in]	fill	Whether the polygon shall be filled
[in]	lineWidth	Line width when drawing unfilled polygon
[in]	name	polygon name
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildRerouter()

virtual bool AdditionalHandler::buildRerouter	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const Position &	pos,
		const std::vector< std::string > &	edgeIDs,
		const double	prob,
		const std::string &	name,
		const bool	off,
		const bool	optional,
		const SUMOTime	timeThreshold,
		const std::vector< std::string > &	vTypes,
		const Parameterised::Map &	parameters
	)

pure virtual

builds a rerouter

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	id	The id of the rerouter
[in]	pos	position of the rerouter in the map
[in]	edgeIDs	The edges the rerouter is placed at
[in]	prob	The probability the rerouter reoutes vehicles with
[in]	name	Calibrator name
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildRerouterInterval()

virtual bool AdditionalHandler::buildRerouterInterval	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const SUMOTime	begin,
		const SUMOTime	end
	)

pure virtual

builds a rerouter interval

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	begin	begin of interval
[in]	end	end of interval

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildRouteProbe()

virtual bool AdditionalHandler::buildRouteProbe	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const std::string &	edgeID,
		const SUMOTime	period,
		const std::string &	name,
		const std::string &	file,
		const SUMOTime	begin,
		const std::vector< std::string > &	vTypes,
		const Parameterised::Map &	parameters
	)

pure virtual

builds a Route probe

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	id	The id of the routeprobe
[in]	edgeID	The edges the routeprobe is placed at
[in]	period	the aggregation period the values the routeprobe collects shall be summed up.
[in]	name	Calibrator name
[in]	file	The file to read the routeprobe definitions from
[in]	begin	The time at which to start generating output
[in]	vtypes	list of vehicle types to be affected
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildRouteProbReroute()

virtual bool AdditionalHandler::buildRouteProbReroute	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	newRouteID,
		const double	probability
	)

pure virtual

builds a route prob reroute

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	newRouteID	new route ID
[in]	probability	rerouting probability

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildSingleLaneDetectorE2()

virtual bool AdditionalHandler::buildSingleLaneDetectorE2	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const std::string &	laneID,
		const double	pos,
		const double	length,
		const SUMOTime	period,
		const std::string &	trafficLight,
		const std::string &	filename,
		const std::vector< std::string > &	vehicleTypes,
		const std::vector< std::string > &	nextEdges,
		const std::string &	detectPersons,
		const std::string &	name,
		const SUMOTime	timeThreshold,
		const double	speedThreshold,
		const double	jamThreshold,
		const bool	friendlyPos,
		const bool	show,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a single-lane Area Detector (E2)

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	id	The id of the detector
[in]	laneID	The lane the detector is placed on
[in]	pos	position of the detector on the lane
	[in[	length length of the detector
[in]	period	the aggregation period the values the detector collects shall be summed up.
[in]	trafficLight	The traffic light that triggers aggregation when switching.
[in]	filename	The path to the output file.
[in]	vtypes	list of vehicle types to be reported
[in]	nextEdges	list of edge ids that must all be part of the future route of the vehicle to qualify for detection
[in]	detectPersons	detect persons instead of vehicles (pedestrians or passengers)
[in]	name	E2 detector name
[in]	timeThreshold	The time-based threshold that describes how much time has to pass until a vehicle is recognized as halting
[in]	speedThreshold	The speed-based threshold that describes how slow a vehicle has to be to be recognized as halting
[in]	jamThreshold	The minimum distance to the next standing vehicle in order to make this vehicle count as a participant to the jam
[in]	friendlyPos	enable or disable friendly position
[in]	show	detector in sumo-gui
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildTAZ()

virtual bool AdditionalHandler::buildTAZ	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const PositionVector &	shape,
		const Position &	center,
		const bool	fill,
		const RGBColor &	color,
		const std::vector< std::string > &	edgeIDs,
		const std::string &	name,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a TAZ (Traffic Assignment Zone)

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	id	TAZ ID
[in]	shape	TAZ shape
[in]	center	shape center
[in]	fill	Whether the TAZ shall be filled
[in]	edgeIDs	list of edges (note: This will create GNETAZSourceSinks/Sinks with default values)
[in]	name	Vaporizer name
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildTAZSink()

virtual bool AdditionalHandler::buildTAZSink	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	edgeID,
		const double	arrivalWeight
	)

pure virtual

Builds a TAZSink (Traffic Assignment Zone)

Parameters

[in]	net	net in which element will be inserted
[in]	allowUndoRedo	enable or disable remove created additional with ctrl + Z / ctrl + Y
[in]	TAZ	Traffic Assignment Zone in which this TAZSink is palced
[in]	edgeID	edge in which TAZSink is placed
[in]	arrivalWeight	arrival weight of TAZSink

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildTAZSource()

virtual bool AdditionalHandler::buildTAZSource	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	edgeID,
		const double	departWeight
	)

pure virtual

Builds a TAZSource (Traffic Assignment Zone)

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	TAZ	Traffic Assignment Zone in which this TAZSource is palced
[in]	edgeID	edge in which TAZSource is placed
[in]	departWeight	depart weight of TAZSource

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildTractionSubstation()

virtual bool AdditionalHandler::buildTractionSubstation	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const Position &	pos,
		const double	voltage,
		const double	currentLimit,
		const Parameterised::Map &	parameters
	)

pure virtual

build traction substation

Parameters

[in]	id	Traction substation ID
[in]	pos	Position of traction substation in view (optional)
[in]	voltage	Voltage of at connection point for the overhead wire
[in]	currentLimit	Current limit of the feeder line
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildTrainStop()

virtual bool AdditionalHandler::buildTrainStop	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const std::string &	laneID,
		const double	startPos,
		const double	endPos,
		const std::string &	name,
		const std::vector< std::string > &	lines,
		const int	personCapacity,
		const double	parkingLength,
		const RGBColor &	color,
		const bool	friendlyPosition,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a train stop.

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	id	The id of the train stop
[in]	laneID	The lane the train stop is placed on
[in]	startPos	Begin position of the train stop on the lane
[in]	endPos	End position of the train stop on the lane
[in]	name	Name of trainStop
[in]	lines	Names of the train lines that halt on this train stop
[in]	personCapacity	larger numbers of persons trying to enter will create an upstream jam on the sidewalk.
[in]	parkingLength	parking length
	[in[	color trainStop color
[in]	friendlyPos	enable or disable friendly position
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildVaporizer()

virtual bool AdditionalHandler::buildVaporizer	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	edgeID,
		const SUMOTime	from,
		const SUMOTime	endTime,
		const std::string &	name,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a vaporizer (lane speed additional)

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	edgeID	edge in which this vaporizer is placed
[in]	from	time in which this vaporizer start
[in]	endTime	time in which this vaporizer ends
[in]	name	Vaporizer name
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildVariableSpeedSign()

virtual bool AdditionalHandler::buildVariableSpeedSign	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const std::string &	id,
		const Position &	pos,
		const std::vector< std::string > &	laneIDs,
		const std::string &	name,
		const std::vector< std::string > &	vTypes,
		const Parameterised::Map &	parameters
	)

pure virtual

Builds a VariableSpeedSign (lane speed additional)

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	id	The id of the lane speed additional
[in]	destLanes	List of lanes affected by this speed additional
[in]	name	VSS name
[in]	vtypes	list of vehicle types to be affected
[in]	parameters	generic parameters

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ buildVariableSpeedSignStep()

virtual bool AdditionalHandler::buildVariableSpeedSignStep	(	const CommonXMLStructure::SumoBaseObject *	sumoBaseObject,
		const SUMOTime	time,
		const std::string &	speed
	)

pure virtual

Builds a VariableSpeedSign Step.

Parameters

[in]	sumoBaseObject	sumo base object used for build
[in]	time	step's time
[in]	speed	new step's speed

Implemented in GNEAdditionalHandler.

Referenced by parseSumoBaseObject().

Here is the caller graph for this function:

◆ checkCalibratorFlowParents()

bool AdditionalHandler::checkCalibratorFlowParents ( )

private

check calibrator flow parents

Definition at line 2044 of file AdditionalHandler.cpp.

References CommonXMLStructure::getCurrentSumoBaseObject(), CommonXMLStructure::SumoBaseObject::getParentSumoBaseObject(), GNE_TAG_CALIBRATOR_LANE, CommonHandler::myCommonXMLStructure, SUMO_TAG_CALIBRATOR, TLF, toString(), and CommonHandler::writeError().

Referenced by parseCalibratorFlowAttributes().

Here is the caller graph for this function:

◆ checkDetectPersons()

bool AdditionalHandler::checkDetectPersons	(	const SumoXMLTag	currentTag,
		const std::string &	id,
		const std::string &	detectPersons
	)

private

check detect persons

Definition at line 2062 of file AdditionalHandler.cpp.

References StringBijection< T >::hasString(), SUMOXMLDefinitions::PersonModeValues, SUMO_ATTR_DETECT_PERSONS, TLF, toString(), and CommonHandler::writeError().

Referenced by parseE1Attributes(), parseE1InstantAttributes(), parseE2Attributes(), and parseE3Attributes().

Here is the caller graph for this function:

◆ checkFileName()

bool CommonHandler::checkFileName	(	const SumoXMLTag	tag,
		const std::string &	id,
		const SumoXMLAttr	attribute,
		const std::string &	value
	)

protectedinherited

check if the given filename is valid

Definition at line 175 of file CommonHandler.cpp.

References SUMOXMLDefinitions::isValidFilename(), TLF, toString(), and CommonHandler::writeError().

Referenced by GNEAdditionalHandler::buildDetectorE1Instant(), GNEAdditionalHandler::buildDetectorE3(), GNEAdditionalHandler::buildE1Detector(), GNEAdditionalHandler::buildMultiLaneDetectorE2(), GNEAdditionalHandler::buildPOI(), GNEAdditionalHandler::buildPOIGeo(), GNEAdditionalHandler::buildPOILane(), GNEAdditionalHandler::buildRouteProbe(), and GNEAdditionalHandler::buildSingleLaneDetectorE2().

Here is the caller graph for this function:

◆ checkListOfVehicleTypes()

bool CommonHandler::checkListOfVehicleTypes	(	const SumoXMLTag	tag,
		const std::string &	id,
		const std::vector< std::string > &	vTypeIDs
	)

protectedinherited

check list of IDs

Definition at line 110 of file CommonHandler.cpp.

References SUMOXMLDefinitions::isValidTypeID(), TLF, toString(), and CommonHandler::writeError().

Referenced by GNEAdditionalHandler::buildDetectorE3(), GNEAdditionalHandler::buildE1Detector(), GNEAdditionalHandler::buildMultiLaneDetectorE2(), GNEAdditionalHandler::buildRerouter(), GNEAdditionalHandler::buildSingleLaneDetectorE2(), and GNEAdditionalHandler::buildVariableSpeedSign().

Here is the caller graph for this function:

◆ checkNegative() [1/3]

bool CommonHandler::checkNegative	(	const SumoXMLTag	tag,
		const std::string &	id,
		const SumoXMLAttr	attribute,
		const double	value,
		const bool	canBeZero
	)

protectedinherited

check if the given double value is NOT negative

Definition at line 139 of file CommonHandler.cpp.

References TLF, toString(), and CommonHandler::writeError().

◆ checkNegative() [2/3]

bool CommonHandler::checkNegative	(	const SumoXMLTag	tag,
		const std::string &	id,
		const SumoXMLAttr	attribute,
		const int	value,
		const bool	canBeZero
	)

protectedinherited

check if the given int value is NOT negative

Definition at line 121 of file CommonHandler.cpp.

References TLF, toString(), and CommonHandler::writeError().

Here is the caller graph for this function:

◆ checkNegative() [3/3]

bool CommonHandler::checkNegative	(	const SumoXMLTag	tag,
		const std::string &	id,
		const SumoXMLAttr	attribute,
		const SUMOTime	value,
		const bool	canBeZero
	)

protectedinherited

check if the given SUMOTime value is NOT negative

Definition at line 157 of file CommonHandler.cpp.

References time2string(), TLF, toString(), and CommonHandler::writeError().

◆ checkParsedParent()

void CommonHandler::checkParsedParent	(	const SumoXMLTag	currentTag,
		const std::vector< SumoXMLTag > &	parentTags,
		bool &	ok
	)

protectedinherited

Definition at line 79 of file CommonHandler.cpp.

References CommonXMLStructure::getCurrentSumoBaseObject(), CommonXMLStructure::SumoBaseObject::getParentSumoBaseObject(), CommonXMLStructure::SumoBaseObject::getStringAttribute(), CommonXMLStructure::SumoBaseObject::getTag(), CommonXMLStructure::SumoBaseObject::hasStringAttribute(), CommonHandler::myCommonXMLStructure, SUMO_ATTR_ID, SUMO_TAG_NOTHING, TLF, toString(), and CommonHandler::writeError().

Referenced by parseAccessAttributes(), parseClosingLaneRerouteAttributes(), parseClosingRerouteAttributes(), parseDestProbRerouteAttributes(), parseEntryAttributes(), parseExitAttributes(), parseParkingAreaRerouteAttributes(), parseParkingSpaceAttributes(), RouteHandler::parsePersonTrip(), parseRerouterIntervalAttributes(), RouteHandler::parseRide(), parseRouteProbRerouteAttributes(), RouteHandler::parseStop(), parseTAZSinkAttributes(), parseTAZSourceAttributes(), RouteHandler::parseTranship(), RouteHandler::parseTransport(), parseVariableSpeedSignStepAttributes(), and RouteHandler::parseWalk().

Here is the caller graph for this function:

◆ checkValidAdditionalID()

bool CommonHandler::checkValidAdditionalID	(	const SumoXMLTag	tag,
		const std::string &	value
	)

protectedinherited

check if the given additional ID is valid

Definition at line 185 of file CommonHandler.cpp.

References SUMOXMLDefinitions::isValidVehicleID(), TLF, toString(), and CommonHandler::writeError().

Here is the caller graph for this function:

◆ checkValidDemandElementID()

bool CommonHandler::checkValidDemandElementID	(	const SumoXMLTag	tag,
		const std::string &	value
	)

protectedinherited

check if the given demand elmement ID is valid

Definition at line 209 of file CommonHandler.cpp.

References SUMOXMLDefinitions::isValidVehicleID(), TLF, toString(), and CommonHandler::writeError().

Here is the caller graph for this function:

◆ checkValidDetectorID()

bool CommonHandler::checkValidDetectorID	(	const SumoXMLTag	tag,
		const std::string &	value
	)

protectedinherited

check if the given detector ID is valid

Definition at line 197 of file CommonHandler.cpp.

References SUMOXMLDefinitions::isValidDetectorID(), TLF, toString(), and CommonHandler::writeError().

Referenced by GNEAdditionalHandler::buildDetectorE1Instant(), GNEAdditionalHandler::buildDetectorE3(), GNEAdditionalHandler::buildE1Detector(), GNEAdditionalHandler::buildMultiLaneDetectorE2(), and GNEAdditionalHandler::buildSingleLaneDetectorE2().

Here is the caller graph for this function:

◆ endParseAttributes()

void AdditionalHandler::endParseAttributes ( )

end parse attributes

Definition at line 191 of file AdditionalHandler.cpp.

References CommonXMLStructure::closeSUMOBaseOBject(), CommonXMLStructure::getCurrentSumoBaseObject(), CommonXMLStructure::SumoBaseObject::getTag(), GNE_TAG_CALIBRATOR_LANE, GNE_TAG_JPS_OBSTACLE, GNE_TAG_JPS_WALKABLEAREA, CommonHandler::myCommonXMLStructure, parseSumoBaseObject(), SUMO_TAG_BUS_STOP, SUMO_TAG_CALIBRATOR, SUMO_TAG_CHARGING_STATION, SUMO_TAG_CONTAINER_STOP, SUMO_TAG_E1DETECTOR, SUMO_TAG_E2DETECTOR, SUMO_TAG_E3DETECTOR, SUMO_TAG_ENTRY_EXIT_DETECTOR, SUMO_TAG_INDUCTION_LOOP, SUMO_TAG_INSTANT_INDUCTION_LOOP, SUMO_TAG_LANE_AREA_DETECTOR, SUMO_TAG_OVERHEAD_WIRE_CLAMP, SUMO_TAG_OVERHEAD_WIRE_SECTION, SUMO_TAG_PARKING_AREA, SUMO_TAG_POI, SUMO_TAG_POLY, SUMO_TAG_REROUTER, SUMO_TAG_ROUTEPROBE, SUMO_TAG_TAZ, SUMO_TAG_TRACTION_SUBSTATION, SUMO_TAG_TRAIN_STOP, SUMO_TAG_VAPORIZER, and SUMO_TAG_VSS.

Referenced by GNEGeneralHandler::endTag().

Here is the caller graph for this function:

◆ isErrorCreatingElement()

bool CommonHandler::isErrorCreatingElement ( ) const

inherited

get flag for mark if a element wasn't created

Definition at line 41 of file CommonHandler.cpp.

References CommonHandler::myErrorCreatingElement.

Referenced by GNEGeneralHandler::isErrorCreatingElement(), GNEApplicationWindow::loadDataElements(), and GNEApplicationWindow::onCmdOpenDataElements().

Here is the caller graph for this function:

◆ operator=()

AdditionalHandler & AdditionalHandler::operator= ( const AdditionalHandler & s )

privatedelete

invalidate assignment operator

◆ parseAccessAttributes()

void AdditionalHandler::parseAccessAttributes ( const SUMOSAXAttributes & attrs )

private

parse access attributes

Definition at line 886 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addBoolAttribute(), CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonHandler::checkParsedParent(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_FRIENDLY_POS, SUMO_ATTR_LANE, SUMO_ATTR_LENGTH, SUMO_ATTR_POSITION, SUMO_TAG_ACCESS, SUMO_TAG_BUS_STOP, SUMO_TAG_NOTHING, and SUMO_TAG_TRAIN_STOP.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseBusStopAttributes()

void AdditionalHandler::parseBusStopAttributes ( const SUMOSAXAttributes & attrs )

private

Definition at line 812 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addBoolAttribute(), CommonXMLStructure::SumoBaseObject::addColorAttribute(), CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addIntAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonXMLStructure::SumoBaseObject::addStringListAttribute(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), INVALID_DOUBLE, RGBColor::INVISIBLE, CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_COLOR, SUMO_ATTR_ENDPOS, SUMO_ATTR_FRIENDLY_POS, SUMO_ATTR_ID, SUMO_ATTR_LANE, SUMO_ATTR_LINES, SUMO_ATTR_NAME, SUMO_ATTR_PARKING_LENGTH, SUMO_ATTR_PERSON_CAPACITY, SUMO_ATTR_STARTPOS, SUMO_TAG_BUS_STOP, and SUMO_TAG_NOTHING.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseCalibratorAttributes()

void AdditionalHandler::parseCalibratorAttributes ( const SUMOSAXAttributes & attrs )

private

parse calibrator attributes

Definition at line 1449 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonXMLStructure::SumoBaseObject::addStringListAttribute(), CommonXMLStructure::SumoBaseObject::addTimeAttribute(), DELTA_T, SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), SUMOSAXAttributes::getOptPeriod(), GNE_TAG_CALIBRATOR_LANE, SUMOSAXAttributes::hasAttribute(), CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_EDGE, SUMO_ATTR_ID, SUMO_ATTR_JAM_DIST_THRESHOLD, SUMO_ATTR_LANE, SUMO_ATTR_NAME, SUMO_ATTR_OUTPUT, SUMO_ATTR_PERIOD, SUMO_ATTR_POSITION, SUMO_ATTR_ROUTEPROBE, SUMO_ATTR_VTYPES, SUMO_TAG_CALIBRATOR, SUMO_TAG_NOTHING, TL, and CommonHandler::writeError().

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseCalibratorFlowAttributes()

void AdditionalHandler::parseCalibratorFlowAttributes ( const SUMOSAXAttributes & attrs )

private

parse calibrator flow attributes

Definition at line 1496 of file AdditionalHandler.cpp.

References SUMOVehicleParameter::calibratorSpeed, checkCalibratorFlowParents(), SUMOVehicleParameter::depart, SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getSUMOTimeReporting(), SUMOSAXAttributes::hasAttribute(), CommonHandler::myCommonXMLStructure, SUMOVehicleParameter::parametersSet, SUMOVehicleParserHelper::parseVehicleAttributes(), SUMOVehicleParameter::repetitionEnd, SUMOVehicleParameter::repetitionOffset, CommonXMLStructure::SumoBaseObject::setTag(), CommonXMLStructure::SumoBaseObject::setVehicleParameter(), SUMO_ATTR_BEGIN, SUMO_ATTR_END, SUMO_ATTR_SPEED, SUMO_ATTR_TYPE, SUMO_ATTR_VEHSPERHOUR, SUMO_TAG_FLOW, SUMO_TAG_NOTHING, TIME2STEPS, TL, VEHPARS_CALIBRATORSPEED_SET, VEHPARS_VPH_SET, and CommonHandler::writeError().

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseChargingStationAttributes()

void AdditionalHandler::parseChargingStationAttributes ( const SUMOSAXAttributes & attrs )

private

parse chargingStation attributes

Definition at line 950 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addBoolAttribute(), CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonXMLStructure::SumoBaseObject::addStringListAttribute(), CommonXMLStructure::SumoBaseObject::addTimeAttribute(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), SUMOSAXAttributes::getOptSUMOTimeReporting(), INVALID_DOUBLE, CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_CHARGEDELAY, SUMO_ATTR_CHARGEINTRANSIT, SUMO_ATTR_CHARGETYPE, SUMO_ATTR_CHARGINGPOWER, SUMO_ATTR_EFFICIENCY, SUMO_ATTR_ENDPOS, SUMO_ATTR_FRIENDLY_POS, SUMO_ATTR_ID, SUMO_ATTR_LANE, SUMO_ATTR_LINES, SUMO_ATTR_NAME, SUMO_ATTR_PARKING_AREA, SUMO_ATTR_STARTPOS, SUMO_ATTR_WAITINGTIME, SUMO_TAG_CHARGING_STATION, SUMO_TAG_NOTHING, TIME2STEPS, TLF, and CommonHandler::writeError().

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseClosingLaneRerouteAttributes()

void AdditionalHandler::parseClosingLaneRerouteAttributes ( const SUMOSAXAttributes & attrs )

private

parse closing lane reroute attributes

Definition at line 1602 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonHandler::checkParsedParent(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_ALLOW, SUMO_ATTR_DISALLOW, SUMO_ATTR_ID, SUMO_TAG_CLOSING_LANE_REROUTE, SUMO_TAG_INTERVAL, and SUMO_TAG_NOTHING.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseClosingRerouteAttributes()

void AdditionalHandler::parseClosingRerouteAttributes ( const SUMOSAXAttributes & attrs )

private

parse closing reroute attributes

Definition at line 1627 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonHandler::checkParsedParent(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_ALLOW, SUMO_ATTR_DISALLOW, SUMO_ATTR_ID, SUMO_TAG_CLOSING_REROUTE, SUMO_TAG_INTERVAL, and SUMO_TAG_NOTHING.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseContainerStopAttributes()

void AdditionalHandler::parseContainerStopAttributes ( const SUMOSAXAttributes & attrs )

private

parse containerStop attributes

Definition at line 913 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addBoolAttribute(), CommonXMLStructure::SumoBaseObject::addColorAttribute(), CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addIntAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonXMLStructure::SumoBaseObject::addStringListAttribute(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), INVALID_DOUBLE, RGBColor::INVISIBLE, CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_COLOR, SUMO_ATTR_CONTAINER_CAPACITY, SUMO_ATTR_ENDPOS, SUMO_ATTR_FRIENDLY_POS, SUMO_ATTR_ID, SUMO_ATTR_LANE, SUMO_ATTR_LINES, SUMO_ATTR_NAME, SUMO_ATTR_PARKING_LENGTH, SUMO_ATTR_STARTPOS, SUMO_TAG_CONTAINER_STOP, and SUMO_TAG_NOTHING.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseDestProbRerouteAttributes()

void AdditionalHandler::parseDestProbRerouteAttributes ( const SUMOSAXAttributes & attrs )

private

parse dest prob reroute attributes

Definition at line 1652 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonHandler::checkNegative(), CommonHandler::checkParsedParent(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_ID, SUMO_ATTR_PROB, SUMO_TAG_DEST_PROB_REROUTE, SUMO_TAG_INTERVAL, and SUMO_TAG_NOTHING.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseE1Attributes()

void AdditionalHandler::parseE1Attributes ( const SUMOSAXAttributes & attrs )

private

parse E1 attributes

Definition at line 1082 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addBoolAttribute(), CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonXMLStructure::SumoBaseObject::addStringListAttribute(), CommonXMLStructure::SumoBaseObject::addTimeAttribute(), checkDetectPersons(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), SUMOSAXAttributes::getOptPeriod(), CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_DETECT_PERSONS, SUMO_ATTR_FILE, SUMO_ATTR_FRIENDLY_POS, SUMO_ATTR_ID, SUMO_ATTR_LANE, SUMO_ATTR_NAME, SUMO_ATTR_NEXT_EDGES, SUMO_ATTR_PERIOD, SUMO_ATTR_POSITION, SUMO_ATTR_VTYPES, SUMO_TAG_E1DETECTOR, SUMO_TAG_NOTHING, and SUMOTime_MAX_PERIOD.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseE1InstantAttributes()

void AdditionalHandler::parseE1InstantAttributes ( const SUMOSAXAttributes & attrs )

private

parse E1 instant attributes

Definition at line 1289 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addBoolAttribute(), CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonXMLStructure::SumoBaseObject::addStringListAttribute(), checkDetectPersons(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_DETECT_PERSONS, SUMO_ATTR_FILE, SUMO_ATTR_FRIENDLY_POS, SUMO_ATTR_ID, SUMO_ATTR_LANE, SUMO_ATTR_NAME, SUMO_ATTR_NEXT_EDGES, SUMO_ATTR_POSITION, SUMO_ATTR_VTYPES, SUMO_TAG_INSTANT_INDUCTION_LOOP, and SUMO_TAG_NOTHING.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseE2Attributes()

void AdditionalHandler::parseE2Attributes ( const SUMOSAXAttributes & attrs )

private

parse E2 attributes

Definition at line 1119 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addBoolAttribute(), CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonXMLStructure::SumoBaseObject::addStringListAttribute(), CommonXMLStructure::SumoBaseObject::addTimeAttribute(), checkDetectPersons(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), SUMOSAXAttributes::getOptPeriod(), SUMOSAXAttributes::getOptSUMOTimeReporting(), SUMOSAXAttributes::hasAttribute(), CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_DETECT_PERSONS, SUMO_ATTR_ENDPOS, SUMO_ATTR_FILE, SUMO_ATTR_FRIENDLY_POS, SUMO_ATTR_HALTING_SPEED_THRESHOLD, SUMO_ATTR_HALTING_TIME_THRESHOLD, SUMO_ATTR_ID, SUMO_ATTR_JAM_DIST_THRESHOLD, SUMO_ATTR_LANE, SUMO_ATTR_LANES, SUMO_ATTR_LENGTH, SUMO_ATTR_NAME, SUMO_ATTR_NEXT_EDGES, SUMO_ATTR_PERIOD, SUMO_ATTR_POSITION, SUMO_ATTR_SHOW_DETECTOR, SUMO_ATTR_TLID, SUMO_ATTR_VTYPES, SUMO_TAG_E2DETECTOR, SUMO_TAG_NOTHING, SUMOTime_MAX_PERIOD, TIME2STEPS, TL, and CommonHandler::writeError().

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseE3Attributes()

void AdditionalHandler::parseE3Attributes ( const SUMOSAXAttributes & attrs )

private

parse E3 attributes

Definition at line 1198 of file AdditionalHandler.cpp.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseEntryAttributes()

void AdditionalHandler::parseEntryAttributes ( const SUMOSAXAttributes & attrs )

private

parse entry attributes

Definition at line 1239 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addBoolAttribute(), CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonHandler::checkParsedParent(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_FRIENDLY_POS, SUMO_ATTR_LANE, SUMO_ATTR_POSITION, SUMO_TAG_DET_ENTRY, SUMO_TAG_E3DETECTOR, and SUMO_TAG_NOTHING.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseExitAttributes()

void AdditionalHandler::parseExitAttributes ( const SUMOSAXAttributes & attrs )

private

parse exist attributes

Definition at line 1264 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addBoolAttribute(), CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonHandler::checkParsedParent(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_FRIENDLY_POS, SUMO_ATTR_LANE, SUMO_ATTR_POSITION, SUMO_TAG_DET_EXIT, SUMO_TAG_E3DETECTOR, and SUMO_TAG_NOTHING.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseJpsObstacleAttributes()

void AdditionalHandler::parseJpsObstacleAttributes ( const SUMOSAXAttributes & attrs )

private

parse juPedSim obstacle attributes

Definition at line 2021 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addPositionVectorAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), GNE_TAG_JPS_OBSTACLE, CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_ID, SUMO_ATTR_NAME, SUMO_ATTR_SHAPE, and SUMO_TAG_NOTHING.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseJpsWalkableAreaAttributes()

void AdditionalHandler::parseJpsWalkableAreaAttributes ( const SUMOSAXAttributes & attrs )

private

parse juPedSim walkable area attributes

Definition at line 1998 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addPositionVectorAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), GNE_TAG_JPS_WALKABLEAREA, CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_ID, SUMO_ATTR_NAME, SUMO_ATTR_SHAPE, and SUMO_TAG_NOTHING.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseOverheadWire()

void AdditionalHandler::parseOverheadWire ( const SUMOSAXAttributes & attrs )

private

parse overhead wire segment

Definition at line 1814 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addBoolAttribute(), CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonXMLStructure::SumoBaseObject::addStringListAttribute(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), INVALID_DOUBLE, CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_ENDPOS, SUMO_ATTR_FRIENDLY_POS, SUMO_ATTR_ID, SUMO_ATTR_LANES, SUMO_ATTR_OVERHEAD_WIRE_FORBIDDEN, SUMO_ATTR_STARTPOS, SUMO_ATTR_SUBSTATIONID, SUMO_TAG_NOTHING, and SUMO_TAG_OVERHEAD_WIRE_SECTION.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseOverheadWireClamp()

void AdditionalHandler::parseOverheadWireClamp ( const SUMOSAXAttributes & attrs )

private

parse overhead wire clamp

Definition at line 1845 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addStringAttribute(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_ID, SUMO_ATTR_OVERHEAD_WIRECLAMP_END, SUMO_ATTR_OVERHEAD_WIRECLAMP_LANEEND, SUMO_ATTR_OVERHEAD_WIRECLAMP_LANESTART, SUMO_ATTR_OVERHEAD_WIRECLAMP_START, SUMO_ATTR_SUBSTATIONID, SUMO_TAG_NOTHING, and SUMO_TAG_OVERHEAD_WIRE_CLAMP.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseParameters()

void CommonHandler::parseParameters ( const SUMOSAXAttributes & attrs )

protectedinherited

parse generic parameters

Definition at line 47 of file CommonHandler.cpp.

References SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), CommonXMLStructure::SumoBaseObject::getParentSumoBaseObject(), SUMOSAXAttributes::getString(), SUMOSAXAttributes::hasAttribute(), SUMOXMLDefinitions::isValidParameterKey(), CommonHandler::myCommonXMLStructure, SUMO_ATTR_KEY, SUMO_ATTR_VALUE, SUMO_TAG_NOTHING, SUMO_TAG_PARAM, SUMO_TAG_ROOTFILE, TL, TLF, toString(), WRITE_DEBUG, and CommonHandler::writeError().

Referenced by beginParseAttributes(), and RouteHandler::beginParseAttributes().

Here is the caller graph for this function:

◆ parseParkingAreaAttributes()

void AdditionalHandler::parseParkingAreaAttributes ( const SUMOSAXAttributes & attrs )

private

parse parking area attributes

Definition at line 1001 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addBoolAttribute(), CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addIntAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonXMLStructure::SumoBaseObject::addStringListAttribute(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), INVALID_DOUBLE, CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_ACCEPTED_BADGES, SUMO_ATTR_ANGLE, SUMO_ATTR_DEPARTPOS, SUMO_ATTR_ENDPOS, SUMO_ATTR_FRIENDLY_POS, SUMO_ATTR_ID, SUMO_ATTR_LANE, SUMO_ATTR_LEFTHAND, SUMO_ATTR_LENGTH, SUMO_ATTR_NAME, SUMO_ATTR_ONROAD, SUMO_ATTR_ROADSIDE_CAPACITY, SUMO_ATTR_STARTPOS, SUMO_ATTR_WIDTH, SUMO_TAG_NOTHING, and SUMO_TAG_PARKING_AREA.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseParkingAreaRerouteAttributes()

void AdditionalHandler::parseParkingAreaRerouteAttributes ( const SUMOSAXAttributes & attrs )

private

parse parking area reroute attributes

Definition at line 1678 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addBoolAttribute(), CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonHandler::checkNegative(), CommonHandler::checkParsedParent(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_ID, SUMO_ATTR_PROB, SUMO_ATTR_VISIBLE, SUMO_TAG_INTERVAL, SUMO_TAG_NOTHING, and SUMO_TAG_PARKING_AREA_REROUTE.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseParkingSpaceAttributes()

void AdditionalHandler::parseParkingSpaceAttributes ( const SUMOSAXAttributes & attrs )

private

parse parking space attributes

Definition at line 1047 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonHandler::checkParsedParent(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_ANGLE, SUMO_ATTR_LENGTH, SUMO_ATTR_NAME, SUMO_ATTR_SLOPE, SUMO_ATTR_WIDTH, SUMO_ATTR_X, SUMO_ATTR_Y, SUMO_ATTR_Z, SUMO_TAG_NOTHING, SUMO_TAG_PARKING_AREA, and SUMO_TAG_PARKING_SPACE.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parsePOIAttributes()

void AdditionalHandler::parsePOIAttributes ( const SUMOSAXAttributes & attrs )

private

parse POI attributes

Definition at line 1914 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addBoolAttribute(), CommonXMLStructure::SumoBaseObject::addColorAttribute(), CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), Shape::DEFAULT_ANGLE, Shape::DEFAULT_IMG_FILE, Shape::DEFAULT_IMG_HEIGHT, Shape::DEFAULT_IMG_WIDTH, Shape::DEFAULT_LAYER_POI, Shape::DEFAULT_RELATIVEPATH, Shape::DEFAULT_TYPE, SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), StringBijection< T >::getString(), SUMOSAXAttributes::hasAttribute(), CommonHandler::myCommonXMLStructure, NONE, SUMOXMLDefinitions::POIIcons, RGBColor::RED, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_ANGLE, SUMO_ATTR_COLOR, SUMO_ATTR_FRIENDLY_POS, SUMO_ATTR_HEIGHT, SUMO_ATTR_ICON, SUMO_ATTR_ID, SUMO_ATTR_IMGFILE, SUMO_ATTR_LANE, SUMO_ATTR_LAT, SUMO_ATTR_LAYER, SUMO_ATTR_LON, SUMO_ATTR_NAME, SUMO_ATTR_POSITION, SUMO_ATTR_POSITION_LAT, SUMO_ATTR_RELATIVEPATH, SUMO_ATTR_TYPE, SUMO_ATTR_WIDTH, SUMO_ATTR_X, SUMO_ATTR_Y, SUMO_TAG_NOTHING, SUMO_TAG_POI, TL, TLF, WRITE_WARNING, and CommonHandler::writeError().

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parsePolyAttributes()

void AdditionalHandler::parsePolyAttributes ( const SUMOSAXAttributes & attrs )

private

Definition at line 1873 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addBoolAttribute(), CommonXMLStructure::SumoBaseObject::addColorAttribute(), CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addPositionVectorAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), Shape::DEFAULT_ANGLE, Shape::DEFAULT_IMG_FILE, Shape::DEFAULT_LAYER, Shape::DEFAULT_LINEWIDTH, Shape::DEFAULT_RELATIVEPATH, Shape::DEFAULT_TYPE, SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), CommonHandler::myCommonXMLStructure, RGBColor::RED, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_ANGLE, SUMO_ATTR_COLOR, SUMO_ATTR_FILL, SUMO_ATTR_GEO, SUMO_ATTR_ID, SUMO_ATTR_IMGFILE, SUMO_ATTR_LAYER, SUMO_ATTR_LINEWIDTH, SUMO_ATTR_NAME, SUMO_ATTR_RELATIVEPATH, SUMO_ATTR_SHAPE, SUMO_ATTR_TYPE, SUMO_TAG_NOTHING, and SUMO_TAG_POLY.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseRerouterAttributes()

void AdditionalHandler::parseRerouterAttributes ( const SUMOSAXAttributes & attrs )

private

parse rerouter attributes

Definition at line 1541 of file AdditionalHandler.cpp.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseRerouterIntervalAttributes()

void AdditionalHandler::parseRerouterIntervalAttributes ( const SUMOSAXAttributes & attrs )

private

parse rerouter interval attributes

Definition at line 1580 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addTimeAttribute(), CommonHandler::checkParsedParent(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getSUMOTimeReporting(), CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_BEGIN, SUMO_ATTR_END, SUMO_TAG_INTERVAL, SUMO_TAG_NOTHING, and SUMO_TAG_REROUTER.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseRouteProbeAttributes()

void AdditionalHandler::parseRouteProbeAttributes ( const SUMOSAXAttributes & attrs )

private

parse route probe attributes

Definition at line 1733 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonXMLStructure::SumoBaseObject::addStringListAttribute(), CommonXMLStructure::SumoBaseObject::addTimeAttribute(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), SUMOSAXAttributes::getOptPeriod(), SUMOSAXAttributes::getOptSUMOTimeReporting(), CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_BEGIN, SUMO_ATTR_EDGE, SUMO_ATTR_FILE, SUMO_ATTR_ID, SUMO_ATTR_NAME, SUMO_ATTR_PERIOD, SUMO_ATTR_VTYPES, SUMO_TAG_NOTHING, SUMO_TAG_ROUTEPROBE, and SUMOTime_MAX_PERIOD.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseRouteProbRerouteAttributes()

void AdditionalHandler::parseRouteProbRerouteAttributes ( const SUMOSAXAttributes & attrs )

private

parse route prob reroute attributes

Definition at line 1707 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonHandler::checkNegative(), CommonHandler::checkParsedParent(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_ID, SUMO_ATTR_PROB, SUMO_TAG_INTERVAL, SUMO_TAG_NOTHING, and SUMO_TAG_ROUTE_PROB_REROUTE.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseSumoBaseObject()

void AdditionalHandler::parseSumoBaseObject ( CommonXMLStructure::SumoBaseObject * obj )

parse SumoBaseObject (it's called recursivelly)

Definition at line 249 of file AdditionalHandler.cpp.

Referenced by GNEShapeFrame::addShape(), GNEAdditionalFrame::buildAdditionalOverEdge(), GNEAdditionalFrame::buildAdditionalOverLane(), GNEAdditionalFrame::buildAdditionalOverView(), GNEWireFrame::buildWireOverView(), GNEAdditionalFrame::createPath(), GNEWireFrame::createPath(), endParseAttributes(), GNEViewNet::onCmdTransformPOI(), parseSumoBaseObject(), and GNETAZFrame::shapeDrawed().

Here is the caller graph for this function:

◆ parseTAZAttributes()

void AdditionalHandler::parseTAZAttributes ( const SUMOSAXAttributes & attrs )

private

parse TAZ attributes

Definition at line 1324 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addBoolAttribute(), CommonXMLStructure::SumoBaseObject::addColorAttribute(), CommonXMLStructure::SumoBaseObject::addPositionAttribute(), CommonXMLStructure::SumoBaseObject::addPositionVectorAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonXMLStructure::SumoBaseObject::addStringListAttribute(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), Position::INVALID, CommonHandler::myCommonXMLStructure, RGBColor::RED, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_CENTER, SUMO_ATTR_COLOR, SUMO_ATTR_EDGES, SUMO_ATTR_FILL, SUMO_ATTR_ID, SUMO_ATTR_NAME, SUMO_ATTR_SHAPE, SUMO_TAG_NOTHING, and SUMO_TAG_TAZ.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseTAZSinkAttributes()

void AdditionalHandler::parseTAZSinkAttributes ( const SUMOSAXAttributes & attrs )

private

parse TAZ sink attributes

Definition at line 1377 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonHandler::checkParsedParent(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_ID, SUMO_ATTR_WEIGHT, SUMO_TAG_NOTHING, SUMO_TAG_TAZ, and SUMO_TAG_TAZSINK.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseTAZSourceAttributes()

void AdditionalHandler::parseTAZSourceAttributes ( const SUMOSAXAttributes & attrs )

private

parse TAZ source attributes

Definition at line 1355 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonHandler::checkParsedParent(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_ID, SUMO_ATTR_WEIGHT, SUMO_TAG_NOTHING, SUMO_TAG_TAZ, and SUMO_TAG_TAZSOURCE.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseTractionSubstation()

void AdditionalHandler::parseTractionSubstation ( const SUMOSAXAttributes & attrs )

private

parse traction substation

Definition at line 1789 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addPositionAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), Position::INVALID, CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_CURRENTLIMIT, SUMO_ATTR_ID, SUMO_ATTR_POSITION, SUMO_ATTR_VOLTAGE, SUMO_TAG_NOTHING, and SUMO_TAG_TRACTION_SUBSTATION.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseTrainStopAttributes()

void AdditionalHandler::parseTrainStopAttributes ( const SUMOSAXAttributes & attrs )

private

parse trainStop attributes

Definition at line 849 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addBoolAttribute(), CommonXMLStructure::SumoBaseObject::addColorAttribute(), CommonXMLStructure::SumoBaseObject::addDoubleAttribute(), CommonXMLStructure::SumoBaseObject::addIntAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonXMLStructure::SumoBaseObject::addStringListAttribute(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), INVALID_DOUBLE, RGBColor::INVISIBLE, CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_COLOR, SUMO_ATTR_ENDPOS, SUMO_ATTR_FRIENDLY_POS, SUMO_ATTR_ID, SUMO_ATTR_LANE, SUMO_ATTR_LINES, SUMO_ATTR_NAME, SUMO_ATTR_PARKING_LENGTH, SUMO_ATTR_PERSON_CAPACITY, SUMO_ATTR_STARTPOS, SUMO_TAG_NOTHING, and SUMO_TAG_TRAIN_STOP.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseVaporizerAttributes()

void AdditionalHandler::parseVaporizerAttributes ( const SUMOSAXAttributes & attrs )

private

parse vaporizer attributes

Definition at line 1764 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonXMLStructure::SumoBaseObject::addTimeAttribute(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), SUMOSAXAttributes::getSUMOTimeReporting(), CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_BEGIN, SUMO_ATTR_END, SUMO_ATTR_ID, SUMO_ATTR_NAME, SUMO_TAG_NOTHING, and SUMO_TAG_VAPORIZER.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseVariableSpeedSignAttributes()

void AdditionalHandler::parseVariableSpeedSignAttributes ( const SUMOSAXAttributes & attrs )

private

parse variable speed sign attributes

Definition at line 1399 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addPositionAttribute(), CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonXMLStructure::SumoBaseObject::addStringListAttribute(), SUMOSAXAttributes::get(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_ID, SUMO_ATTR_LANES, SUMO_ATTR_NAME, SUMO_ATTR_POSITION, SUMO_ATTR_VTYPES, SUMO_TAG_NOTHING, and SUMO_TAG_VSS.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ parseVariableSpeedSignStepAttributes()

void AdditionalHandler::parseVariableSpeedSignStepAttributes ( const SUMOSAXAttributes & attrs )

private

parse variable speed sign step attributes

Definition at line 1426 of file AdditionalHandler.cpp.

References CommonXMLStructure::SumoBaseObject::addStringAttribute(), CommonXMLStructure::SumoBaseObject::addTimeAttribute(), CommonHandler::checkParsedParent(), CommonXMLStructure::getCurrentSumoBaseObject(), SUMOSAXAttributes::getOpt(), SUMOSAXAttributes::getSUMOTimeReporting(), CommonHandler::myCommonXMLStructure, CommonXMLStructure::SumoBaseObject::setTag(), SUMO_ATTR_SPEED, SUMO_ATTR_TIME, SUMO_TAG_NOTHING, SUMO_TAG_STEP, and SUMO_TAG_VSS.

Referenced by beginParseAttributes().

Here is the caller graph for this function:

◆ postParserTasks()

virtual bool AdditionalHandler::postParserTasks ( )

pure virtual

run post parser tasks

Implemented in GNEAdditionalHandler.

◆ writeError()

bool CommonHandler::writeError ( const std::string & error )

protectedinherited

write error and enable error creating element

Definition at line 221 of file CommonHandler.cpp.

References CommonHandler::myErrorCreatingElement, and WRITE_ERROR.

◆ writeErrorDuplicated()

bool CommonHandler::writeErrorDuplicated	(	const SumoXMLTag	tag,
		const std::string &	id,
		const SumoXMLTag	checkedTag
	)

protectedinherited

write error "duplicated additional"

Definition at line 235 of file CommonHandler.cpp.

References TLF, toString(), and CommonHandler::writeError().

Referenced by GNEAdditionalHandler::checkDuplicatedAdditional(), GNEDataHandler::checkDuplicatedDataSet(), GNERouteHandler::checkDuplicatedDemandElement(), and GNEMeanDataHandler::checkDuplicatedMeanDataElement().

Here is the caller graph for this function:

◆ writeErrorInvalidDistribution()

bool CommonHandler::writeErrorInvalidDistribution	(	const SumoXMLTag	tag,
		const std::string &	id
	)

protectedinherited

write error "invalid distribution"

Definition at line 247 of file CommonHandler.cpp.

References TLF, toString(), and CommonHandler::writeError().

Referenced by RouteHandler::parseRouteDistribution(), and RouteHandler::parseVTypeDistribution().

Here is the caller graph for this function:

◆ writeErrorInvalidLanes()

bool CommonHandler::writeErrorInvalidLanes	(	const SumoXMLTag	tag,
		const std::string &	id
	)

protectedinherited

write error "invalid list of lanes"

Definition at line 241 of file CommonHandler.cpp.

References TLF, toString(), and CommonHandler::writeError().

◆ writeErrorInvalidParent() [1/3]

bool CommonHandler::writeErrorInvalidParent	(	const SumoXMLTag	tag,
		const std::string &	id,
		const SumoXMLTag	parentTag,
		const std::string &	parentID
	)

protectedinherited

write error "invalid parent element" giving ids of current and parent element

Definition at line 253 of file CommonHandler.cpp.

References TLF, toString(), and CommonHandler::writeError().

◆ writeErrorInvalidParent() [2/3]

bool CommonHandler::writeErrorInvalidParent	(	const SumoXMLTag	tag,
		const SumoXMLTag	parentTag
	)

protectedinherited

write error "invalid parent element" without giving IDs

Definition at line 265 of file CommonHandler.cpp.

References TLF, toString(), and CommonHandler::writeError().

◆ writeErrorInvalidParent() [3/3]

bool CommonHandler::writeErrorInvalidParent	(	const SumoXMLTag	tag,
		const SumoXMLTag	parentTag,
		const std::string &	parentID
	)

protectedinherited

write error "invalid parent element" giving only the id of parent element

Definition at line 259 of file CommonHandler.cpp.

References TLF, toString(), and CommonHandler::writeError().

◆ writeErrorInvalidPosition()

bool CommonHandler::writeErrorInvalidPosition	(	const SumoXMLTag	tag,
		const std::string &	id
	)

protectedinherited

write error "invalid position"

Definition at line 229 of file CommonHandler.cpp.

References TLF, toString(), and CommonHandler::writeError().

Here is the caller graph for this function:

Field Documentation

◆ myCommonXMLStructure

CommonXMLStructure CommonHandler::myCommonXMLStructure

protectedinherited

common XML Structure

Definition at line 51 of file CommonHandler.h.

◆ myErrorCreatingElement

bool CommonHandler::myErrorCreatingElement = false

protectedinherited

flag for mark if a element wasn't created

Definition at line 54 of file CommonHandler.h.

Referenced by CommonHandler::isErrorCreatingElement(), and CommonHandler::writeError().

The documentation for this class was generated from the following files:

Public Member Functions

Protected Member Functions

Protected Attributes

Private Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ AdditionalHandler() [1/2]

◆ ~AdditionalHandler()

◆ AdditionalHandler() [2/2]

Member Function Documentation

◆ beginParseAttributes()

◆ buildAccess()

◆ buildBusStop()

◆ buildCalibratorFlow()

◆ buildChargingStation()

◆ buildClosingLaneReroute()

◆ buildClosingReroute()

◆ buildContainerStop()

◆ buildDestProbReroute()

◆ buildDetectorE1Instant()

◆ buildDetectorE3()

◆ buildDetectorEntry()

◆ buildDetectorExit()

◆ buildE1Detector()

◆ buildEdgeCalibrator()

◆ buildJpsObstacle()

◆ buildJpsWalkableArea()

◆ buildLaneCalibrator()

◆ buildMultiLaneDetectorE2()

◆ buildOverheadWire()

◆ buildOverheadWireClamp()

◆ buildParkingArea()

◆ buildParkingAreaReroute()

◆ buildParkingSpace()

◆ buildPOI()

◆ buildPOIGeo()

◆ buildPOILane()

◆ buildPolygon()

◆ buildRerouter()

◆ buildRerouterInterval()

◆ buildRouteProbe()

◆ buildRouteProbReroute()

◆ buildSingleLaneDetectorE2()

◆ buildTAZ()

◆ buildTAZSink()

◆ buildTAZSource()

◆ buildTractionSubstation()

◆ buildTrainStop()

◆ buildVaporizer()

◆ buildVariableSpeedSign()

◆ buildVariableSpeedSignStep()

◆ checkCalibratorFlowParents()

◆ checkDetectPersons()

◆ checkFileName()

◆ checkListOfVehicleTypes()

◆ checkNegative() [1/3]

◆ checkNegative() [2/3]

◆ checkNegative() [3/3]

◆ checkParsedParent()

◆ checkValidAdditionalID()

◆ checkValidDemandElementID()

◆ checkValidDetectorID()

◆ endParseAttributes()

◆ isErrorCreatingElement()

◆ operator=()

◆ parseAccessAttributes()

◆ parseBusStopAttributes()

◆ parseCalibratorAttributes()

◆ parseCalibratorFlowAttributes()

◆ parseChargingStationAttributes()

◆ parseClosingLaneRerouteAttributes()

◆ parseClosingRerouteAttributes()

◆ parseContainerStopAttributes()

◆ parseDestProbRerouteAttributes()

◆ parseE1Attributes()

◆ parseE1InstantAttributes()

◆ parseE2Attributes()

◆ parseE3Attributes()

◆ parseEntryAttributes()

◆ parseExitAttributes()