Fixed automatic ride sharing for personTrips between the same origin and destination that did not declare a common 'group'. By default, rides are not shared. Automatic ride sharing for personTrips and rides can be enabled by setting option --persontrip.default.group STR to an arbitrary value. Issue #7559, #7560
Fixed bug where leader vehicles were ignored during lane-changing when using the sublane mode. Issue #7614
Fixed invalid conflict check for vehicles on the same intersection. Issue #7618, #7173, #7825, #7840
Fixed failure to create a rescue lane. Issue #7173
Parallel intermodal routing now respects the option --routing-algorithm. Issue #7628
Fixed oscillating lane changes in roundabout with more than 2 lanes. Issue #7738
Planned vehicle stops are no longer included in edgeData waitingTime output. Issue #7748
Option --ignore-junction-blocker is now working again. Issue #7650 (Regression in 1.0.0)
Fixed "jumping" persons when transferring from car to walking at junction. Issue #7778
Fixed unsafe insertion speed for IDM which was causing emergency braking #7786
When using the sublane model, vehicles will now consider the travel speed on lanes beyond their current neighboring lanes for tactical lane changing. Issue #7620
Emergency vehicles that are using a rescue lane can now pass an intersection even if the necessary turning lane is blocked. Issue #7619
Fixed invalid negative space and time gap in ssm device output. Issue #7844
Now saving output of ssm device relative to the configuration file by default. Issue #7847
Fixed invalid speed and acceleration for parked vehicle. Issue #7850
Fixed negative timeLoss in edgeData output. Issue #7805
battery model now works correctly with subseconds and handles additional power intake better. Issue #7695
crashing
Fixed crash on parallel intermodal routing. Issue #7627
Fixed crash when defining stops on internal edges. Issue #7690
Fixed crash when using meanData attribute 'trackVehicles=True' in a pedestrian simulation. Issue #7664
Fixed crash when vehicle with ssm device is teleported. Issue #7753
Fixed bug with non-deterministic behavior and aborted rides if person capacity at a busStop was exceeded. Issue #7674, #7662
Intermodal routing no longer returns plans that frequently alternate between taxi and walking. The assumed time penalty when starting a taxi ride is now set to 300s configurable with option --persontrip.taxi.waiting-time. Issue #7651
Grouped rides are now serviced in batches when the group size exceeds maximum taxi personCapacity. Issue #7660
meso
Fixed bug in queue selection which could severely reduce flow at tls controlled intersection with turn lanes. Issue #7794 (regression in 1.7.0)
Fixed bug where persons would enter a stopped vehicle at the wrong stop. Issue #7866
Option --meso-minor-penalty is no longer applied on top of --meso-tls-penalty. Issue #7802
Fixed delayed insertion on on traffic light edge when option --meso-tls-penalty is used. Issue #7875
Passengers that leave a vehicle are now counted in --stop-output. Issue #7865
netconvert
Fixed unsafe traffic light signals when two connections from the same edge target the same lane. Issue #7550
Fixed missing right-turn connections from bicycle lanes to mixed traffic road. Issue #7548
Road lanes that prohibit bicycles no longer receive bicycle permissions when a bicycle lane ends. Instead the bicycle lane receives a double-connection to allowed target edges where needed. Issue #2350
Fixed invalid right of way for right-turning double-connections at intersections with one incoming road. The rightmost lane now gets priority. Issue #7552
Fixed inconsistent OSM-typemap that artificially restricted bicycle driving direction on edge type 'highway.path'. Issue #7615
Fixed unsafe intersection rules for double connection with internal junction. Issue #7622
Option --geometry.remove now longer causes streets with different names to be joined. Issue #637
Loading public transport stops with 'access' via option --ptstop-files and removing the stop edge via options is now working. Issue #7658
Fixed unsafe position of internal junctions on large junctions with multiple turning connections. Issue #7761
Two-lane side roads entering a priority junction now create a left-turn lane instead of a right-turn lane in most cases. Issue #7754
Fixed building of unsafe right-of-way rules at traffic light junctions where the highest priority road makes a turn. Issue #7764
netedit
Visual scaling of selected objects (via selection frame) is now working for junctions (regression in 1.7.0). Issue #7571
Crossings no longer disappear when changing lane count of crossed edges. Issue #7626
Fixed object centering after filtering by substring in object locator. Issue #6361
Fixed very slow operation when loading large edgeData sets. Issue #7604
Fixed automatic color calibration when coloring edges 'by permission'. Issue #5852
Boolean attributes of vehicle stops are now working. Issue #7666
Fixed dotted contour of inspected edges in left-hand networks. Issue #7675 (regression in 1.7.0)
Fixed dotted contour of bidi rail edges in spread mode. Issue #7569
Fixed text angle of name attribute for additional network objects. Issue #6516
Flow and stack labels now scale with vehicle exaggeration. Issue #6541
Inspecting tls-controlled crossings now always shows the corresponding tls link index. Issue #7747
Link indices of connections and crossings can now be reset to default using value '-1'. Issue #4540
Fixed invalid warning about unsaved data. Issue #5971
Traffic light frame button 'clean states' now properly cleans up last indices #7781
sumo-gui
Rail carriages are now drawn next to the track when at a stop with parking=true. Issue #7528
Fixed invalid simulation end after reloading. Issue #7582
Prevented opening of multiple locator windows for the same object type. Issue #6916
Fixed crash when locating vehicles by name while the simulation is running. Issue #7768
Fixed crash when loading a network with internal lanes using mesosim and disabling junction shape rendering. Issue #7857 (regression in 1.6.0)
duarouter
Fixed crash on parallel intermodal routing. Issue #7627
Parallel intermodal routing now respects the option --routing-algorithm. Issue #7628
Fixed NaN value int output when using option --logit. Issue #7621
Fixed invalid intermodal plans where switching between riding and walking happened on intersection. Issue #7652
Fixed invalid intermodal plans when walk ends at trainStation and an access element is required to reach the starting edge of the ride. Issue #7654
TraCI
Fixed crash when using moveToXY in an intermodal network. Issue #7763 (Regression in 1.7.0)
arrivalPos is no longer ignored in traci.vehicle.add. Issue #7691
Function traci.vehicle.getStopDelay now returns correct estimates for waypoints. Issue #7752
The server side socket is now closed earlier to avoid race conditions when starting many simulations. Issue #7750
Tools
osmWebWizard search now works for IE users. Issue #6119
batch files generated by osmWebWizard on linux can now be used on windows. Issue #7667
Tools that support option -C for saving their configuration now use proper xml-escaping for their option values. Issue #7633
routeSampler.py no longer includes routes which do not pass any counting location when using option --optimize. This also speeds up execution. Issue #6723
Added new input elements that can be loaded to influence rail signal operation by providing constraints on train ordering. Issue #7435
Train waiting time is now taken into account when resolving conflicts between otherwise equal trains. Issue #7598
edgeData output now includes attribute timeLoss. Issue #1396
Pedestrian simulation will no longer deadlock on narrow sidewalks (< 1.28m) Issue #7746
Person journey can now include transfer from walking-only edge to car-only edge at junction #7779
Option --ride.stop-tolerance now applies to all kinds of stops. #6204
Added option --fcd-output.max-leader-distance which will add attributes leaderGap, leaderSpeed, leaderID to fcd-output whenever a vehicle has a leader within the given distance #7788
Stop for vehicles and persons can now be specified using attribute 'edge' instead of 'lane'. Vehicles will stop on the rightmost lane that allows their vehicle class (whereas persons ignored the lane index anyway). Issue #5443
Taxi device can now be used to simulate on-demand container transport. Issue #7815
Option --fcd-output.params now supports optional output of device parameters and model parameters with the same prefix codes as TraCI. Issue #7851
Option --fcd-output.params caccVehicleMode now outputs the vehicle mode of CACC vehicles, which can be one of CC, ACC, CACC, CACC_GAP_CL (gap-closing), CACC_GAP, CACC_CA (collision avoidance). Issue #6700
meso
Model parameters can now be customized for each edge type via additional file input. Issue #7243
Stop handling is now similar to microsimulation, pedestrians walk to the correct location and are picked up there, stopinfo is written
netedit
Create edge mode now allows selecting from edge types and to inspect/edit edge attributes. Issue #2431
Opposite direction lanes can now be edited and selected. Issue #2653
Edges can now be split while in 'create edge mode' by shift-clicking. Issue #6754
Edge operation 'restore geometry endpoint' can now be applied to edge selections. Issue #7576
Junction attribute 'tlLayout' can now be edited. Issue #7812
Edit mode specific options are now buttons instead of checkboxes to better fit on the screen. Issue #6498
sumo-gui
Rail signal now includes internal state (reason for red) in parameter dialog. Issue #7600
Added option --delay (shortcut -d) to set the simulation delay. Issue #6380
Vehicles can now be colored by arrival delay at public transport stops
Centering on a vehicle in meso is now accurate. Issue #7871
netconvert
Added option --junctions.join-same which joins junctions with identical coordinates regardless of edge topology. This is useful when merging networks. Issue #7567
Added option --dlr-navteq.keep-length to make use of explicit edge lengths in the input. Issue #749
duarouter
Added option --persontrip.taxi.waiting-time to model the time penalty involved when calling a taxi. Issue #7651
od2trips
Attributes 'fromTaz' and 'toTaz' are now written for walks and personTrips. Issue #7591
TraCI
Added new function vehicle.getStopArrivalDelay to return the arrivalDelay at a public transport stop that defines the expected 'arrival'. Issue #7629
Added new functions for railway simulation to investigate why a rail signal is red: *trafficlight.getBlockingVehicles, trafficlight.getRivalVehicles, trafficlight.getPriorityVehicles'. Issue #7019
Function 'simulation.findIntermodalRoute' now supports mode=taxi. Issue #7757
Function vehicle.moveToXY' now only maps onto lanes compatible with the vClass of the vehicle. To ignore permissions, bit2 of the keepRoute flag can be set. Issue #5383
Added randomTrips.py option --via-edge-types. When this option is set to a list of types, edges of this type are not used for departure or arrival unless they are on the fringe. This can be used to prevent departure on the middle of a motorway. Issue #7505
Added traceExporter.py option --shift which allows shifting output coordinates by a fixed amount (i.e. to avoid negative values).
Added traceExporter.py now supports option --ipg-output for generating car-maker tracefiles. Issue #6190
routeSampler.py now supports option --minimize-vehicles FLOAT which allows configuring a preference for fewer generated vehicles (where each vehicle passes multiple counting locations). Issue #7635
Added new tool osmTaxiStop.py to import taxi stands from OSM data. Issue #7729
Added new tool checkStopOrder.py to detect inconsistent times in a public transport schedule. Issue #7458
added osmWebWizard option --output to set a custom output directory. Issue #7672
Changed osmWebWizard default for --device.rerouting.adaptation-interval from 1 to 10 to increase performance. The value of --adaptation-steps was reduced from 180 to 18 so that the time over which speeds are averaged remains at 180s (with fewer samples). Issue #7640
macOS launchers added for sumo-gui, netedit and the osmWebWizard. This allows to set sumo-gui as the default application to open .sumocfg files (to open a simulation by just double clicking a file) on macOS.
extractTest.py now extracts tests for all variants (sumo, meso) which have specific outputs and got a lot better picking up all options
When using the options --vehroute-output.write-unfinished --vehroute-output.exit-times all edges of the route are now included (instead of passed edges only) and the exit times for unfinished edges are written as '-1'. Issue #6956
Fixed invalid error when using route attribute 'repeat'. Issue #7036
Fixed invalid error when using option --scale and vehicles are using attribute depart="triggered". Issue #6790
Closed roads with changed permissions are no longer ignored by the first loaded vehicles. Issue #6999
Fixed invalid amount of charged energy in subsecond simulation when using battery device. Issue #7074
personTrips now support attribute fromTaz. Issue #7092
Fixed invalid error when setting vehicle stop. Issue #7059
Fixed bugs that were causing collisions. Issue #7131, #7136, #7154
Fixed crash when patching a network with '.tll.xml' file. Issue #7014 (Regression in 1.6.0)
Fixed invalid results/crashing when splitting an edge within a joined traffic light. Issue #7017
Fixed missing traffic lights when using --tls.guess-signals together with --junctions.join. Issue #6977
Fixed missing busStops when importing public transport lines from OSM. Issue #6963
Fixed invalid error when patching network with netdiff patches. Issue #6981
Fixed invalid offset when using option --tls.quarter-offset. Issue #6988
Option --geometry.avoid-overlap is no longer lost on reloading a network. Issue #7033
Fixed infinite loop when loading OSM data with 'NaN' values. Issue #7101
Fixed invalid 'neigh' lanes when editing network. Issue #7108
Fixed bad node shapes at complex intersections with roads and footpaths. Issue #7042
Fixed invalid keepClear state for intersections without cross-traffic. Issue #4437
sumo-gui
Corrected shape of laneAreaDetector when lanes have a length-geometry-mismatch. Issue #6627
Corrected waiting position for persons at busStop in lefthand-network. Issue #6985
Fixed crash in mesosim when keeping vehicle parameter window open. Issue #7194
Fixed changes to neighboring values when setting color thresholds. Issue #7304
Fixed invalid floating point values in saved GUI settings. Issue #7305
netedit
Fixed invalid results/crashing when splitting an edge within a joined traffic light. Issue #7018
Routes with a single edge can now be created. Issue #7129
Fixed bug where all passenger lanes changed their permissions when adding a sidewalk. Issue #7135
Fixed crash when changing connection shape or junction shape. Issue #7138, #7351
Fixed invalid output when transforming trip to vehicle. Issue #7073
Fixed invalid routes when on of its edges. Issue #6986
Fixed invalid count of selected elements. Issue #7113
Fixed missing minDur and maxDur attributes after changing tlType. Issue #7188
Selection coloring is now working in data mode. Issue #7066
Fixed crash when adding multiple busStops to a trip. Issue #7251
Fixed invalid handling of stops loaded from route file. Issue #7191
Added option "unregulated" to the list of permitted junction types. Issue #7359
Fixed bug that caused inconsistent output when modifying the traffic light index of connections. Issue #7311
LaneAreaDetectors linked to a traffic light (with attribute 'tl') can now be loaded. Issue #7275
Selection of data elements can now be edited in inspect mode. Issue #7067
Removed invalid content restriction for shape params. Issue #7379
Flows with an embedded route can now be loaded. Issue #7317
Size exaggeration for route is now working as in sumo-gui. Issue #7410
duarouter
Person ride arrivalPos is now included in route-output. Issue #7260
Fixed crash when loading fully defined person plan. Issue #7423
marouter
Fixed crash when using routing algorithm 'CH'. Issue #6912, #6935
Tools
Fixed invalid connection diff when edges without any connections are removed. Issue #6643
randomTrips.py options --junction-taz and --validate no work as expected when combined. Issue #7002
randomTrips.py no longer generates trips were fromJunction equals toJunction when setting option --junction-taz. Issue #7005
randomTrips.py option --vtype-output now also applies to trip output. Issue #7089
turnFile2EdgeRelations.py can now handle empty intervals. Issue #7084
XML objects returned by sumo.xml.parse can now add attributes which are python keywords correctly. Issue #7441
TraCI
Fixed memory leaks when using libsumo. Issue #7012, #7169, #7220
Fixed invalid vehicle placement when using vehicle.moveToXY and the lane hint specifies a neighboring lane of the target position. Issue #6870
Fixed crash when accessing prior riding stage with person.getStage. Issue #7060
Fixed crash and delayed effect when setting vehicle parameter "device.rerouting.period". Issue #7064, #7075
Polygons and POIs added at runtime now show up in contextSubscriptions. Issue #7057
TraaS function getDeltaT is now working. Issue #7121
The python client now supports adding polygons with more than 255 shape points. Issue #7161
Vehicle type parameters can now be retrieved from vehicles with libsumo. Issue #7209
Fixed invalid electric vehicle parameters being used when calling 'traci.vehicle.getElectricityConsumption'. Issue #7196
Constructor of traci.simulation.Stage now uses the same default arguments as libsumo.simulation.Stage and an be constructed without arguments. Issue #7265
Fixed invalid vehicle lane position when using moveToXY in a network with custom edge lengths. Issue #7401
Added option --person-summary-output which causes statistics on person numbers and their travel modes to be written in every simulation step. Issue #6964
summary-output now includes number of stopped vehicles. Issue #6966
Option --scale now also applies to persons. Issue #5564
Emission-output is now written only for those vehicles that have an emission device. By default all vehicles get the device when option --emission-output is set. This default can be changed by standard device assignment options and configurations. Issue #7079
Added option --device.emissions.period to control the period in which emission-output is written. Issue #7079
Charging stations now work when a vehicle is parking (either with parking="true" or when stopped at a parkingArea and a chargingStation simultaneously). Issue #7068
The distance at which vehicles react to device.bluelight can now be configured with option --device.bluelight.reactiondist. Issue #7112
Pedestrians can now be configured to ignore oncoming cars at an unregulated crossing via junction model parameters (jmIgnoreFoeProb, jmIgnoreFoeSpeed). Issue #7148
Strategic lane-changes can now be disabled by setting 'lcStrategic="-1"`. Issue #7180
Taxi pickup and drop-off location can now be restricted to public transport stops by setting --persontrip.transfer.walk-taxi ptStops and --persontrip.transfer.taxi-walk ptStops. Issue #7192
Improved loading time of large rail networks. Issue #7403
Added option --railway.max-train-length to tune the efficiency of the railway router initialization. Issue #7405
Calibrators now support attribute 'jamThreshold' to configure automatic jam clearing. Issue #6592
--railsignal-block-output now includes 'protectingSwitches' to distinguish flanks guarded by signals from flanks guarded by switches. Issue #7489
netconvert
Added option --discard-param KEY1,KEY2,.. which deletes all <param .../> elements with the given keys. Issue #6972
Added option edges.join-tram-dist <FLOAT> which can be used to join overlying road and tram edges into a single lane with combined permissions. This is needed for the correct dynamics in OSM-derived networks. Issue #6980
When loading ptstop-files and filtering the network extend, the loaded stops will be filtered automatically. Issue #7024
When specifying a polygon boundary for option --keep-edges.in-boundary, the argument may now contain spaces to separate positions. This allows copying a polygon shape attribute. Issue #7025
When an intersection is surrounded by connected footpaths, superfluous walkingareas are no longer built. The distance at which pedestrian nodes count as connected can be set by option --walkingareas.join-dist. Issue #7120
Added new node attribute 'tlLayout' to configure signal plan layout per node. Issue #7187
Added new traffic light layout 'alternateOneWay' to model work zones where each direction uses the interior of a joined traffic light exclusively. Issue #7199
Added option --roundabouts.visibility-distance to set the default visibility distance when entering a roundabout. The new default is 9 (meters) which is twice the default link visibility and this leads to smoother flow when there are no foe vehicles at a roundabout. The old behavior can be restored by setting --roundabouts.visibility-distance -1. Issue #4703
netedit
Edges can now be colored by edgeData attribute (as in sumo-gui). Issue #6953
Added function 'select reachable' to the edge context menu (just like sumo-gui). Issue #6995
In create-route-mode, edges can now be colored by reachability from the last selected edge. Issue #6995
Elements can now be marked as 'front element' (F11) to facilitate working with overlapped objects in move mode and traffic light mode. Issue #4903, #5781
LaneAreaDetectors with multiple lanes can now be created. Issue #7475
sumo-gui
Improved visualization of long vehicles (i.e. trains) when zoomed out (length/width ratio reduces with zoom). Issue #6745
A color legend for vehicle colors can now be enabled via the 'Legend' tab. Issue #6930
Vehicles can now be stopped and stops can be aborted via context menu.Issue #2755
The hiding-threshold for edge coloring can now also hide edge color value labels (to avoid clutter from irrelevant numbers). Issue #7140
Added locator menu entry for containers. Issue #7324
duarouter
Route attributes 'repeat' and 'cycleTime' are now supported. Issue #7165
od2trips
Can now specify persontrip modes with option --persontrip.modes. Issue #7219
meso
Added option --meso-tls-flow-penalty FLOAT. This can be used to control the headway penalty to model maximum (averaged) flow at traffic lights. Formerly the option --meso-tls-penalty was responsible for this but now the latter option only controls the travel time penalty. Issue #7497, #7491
All Applications
Symbolic color definition "random" can now be used (i.e. in vehicle, vType, poi, ...). Issue #7058
There is a new emission model "Zero" replacing "HBEFA*/zero" etc. Furthermore the default emission class for a model can now be chosen using something like "HBEFA3/default". Issue #7098
TraCI
Added new function simulation.loadState for quick-loading a saved simulation state. Issue #6201
Added new optional 'reason' argument to vehicle.moveTo which controls how the vehicle interacts with detectors. By default, vehicles will be registered by detectors if the moveTo distance is physically plausible. Issue #3318.
Added new function vehicle.getStops. This can be used to retrieve the next or last n stops. The method returns a list of stop objects with extended attributes. Issue #7015, #7249, #7117, #7452
Added functionality for retrieving lane, position and stopped vehicles for traci domains 'busstop', 'parkingarea', 'chargingstation' and 'overheadwire'. Issue #5952, #7099
The python client now supports the optional argument 'traceFile' in function traci.start which records all traci commands to the given file (also works for libsumo.start). The optional boolean argument 'traceGetters' can be used to switch off tracing of data retrieval functions. Issue#6604, #7481
Added function 'vehicle.replaceStop' which replaces the upcoming stop with the given index and automatically adapts the route to the new stop edge. Issue #7226
Added function 'vehicle.getFollower' which works like getLeader but looks backwards. Issue #7107
Retrieval of prior person stages now includes departure time and travel time. Issue #7274
Added 'simulation.getVersion' to libsumo and C++ client. Issue #7282
Function 'person.moveToXY' is now officially supported whenever a person is walking or stopped. It can be used to move a person to an arbitrary place and will update the route accordingly. Issue #2872, #7367, #7382
Added new tool computeCoordination.py to compute the fraction of delayed vehicles along a defined corridor. Issue #6987
implausibleRoutes.py now works better with routes consisting of a single edge only and respects internal edge lengths. It can also detect routes containing edge loops or node loops. Issue #7071
osmWebWizard now exports public transport edges for rail vehicles when setting both of the options 'Car-only Network' and 'Import public transport'. Issue #7081
Added new tool addStopDelay.py to add random stop delays to a route file. Issue #5209
routeSampler.py: Now supports option --weighted. This causes routes to be sampled according to their probability. The probability can either be specified explicitly using route attribute 'probability' or implicitly if the same sequence of edges appears multiple times in the route input. Issue #7501
Route attribute 'period' was renamed to 'cycleTime'. Issue #7168
Total simulation running time is now in seconds rather than milliseconds. Issue #7255
netconvert
Roads of type 'highway.track' (agricultural roads) are no longer accessible by cars when importing OSM data. Issue #7082
Netedit
Demand creation entries have been renamed to better distinguish the different variants (i.e. flow with embedded route or flow with origin and destination). Issue #7175
TraCI
In the python client, function vehicle.getLeader can now optionally return the pair ("", -1) instead of 'None' if no leader is found. The new behavior can be enabled by calling function traci.setLegacyGetLeader(False). In later versions this will be the default behavior. The return value 'None' is deprecated. Issue #7013
The function 'libsumo.vehicle.getNextStops' now returns a list of StopData objects rather than a list of tuples (the same result type returned by getStops) but different from the return type of 'traci.vehicle.getNextStops'. If the python script should be fully compatible between traci and libsumo, the new function 'vehicle.getStops' must be used.
Tools
randomTrips.py now generates repeatable results by default (by using a fixed default seed). To obtain the prior random behavior without specifying a seed, the option --random can be used (just like for sumo). Issue #6989
Documentation
Dark Mode added (not available on Internet Explorer)
Taxi device now supports ride sharing. Issue #6544
Added option --extrapolate-departpos. When this option is set, vehicles with a departure time that lies between simulation steps have their depart position shifted forward to better reflect their position at the actual insertion time. This can greatly reduce depart delay and increase and insertion flow in high-flow situations. Issue #4277
Traffic lights of type 'actuated' and 'delay_based' now support the use of custom detectors. Issue #5125, Issue #6773
The new route attribute period is now applied repeatedly when rerouting the vehicle and the new route contains stops with attribute until to shift those times forward (e.g. on cyclical rerouters for public transport vehicles). Issue #6550
The new route attribute repeat can now be used to define repeating routes. When the route contains stop definitions with the until-attribute, the new route attribute period must be used to shift the repeated stop times. Issue #6554
Added option --fcd-output.params KEY1,KEY2,... to extend fcd-output with additional vehicle generic parameters. Issue #6685
Tripinfo-output attribute vaporized now includes specific description for premature vehicle removal (collision, traci, calibrator, ...). Issue #6718
Tripinfo-output now includes timeloss for person rides. Issue #6891
Added option --vehroute-output.stop-edges to record the edges that were driven ahead of stop as part of the vehroute output. Issue #6815
Added option --weights.priority-factor FLOAT to factor the priority of edges into the routing decision with a configurable weight (edges with higher priority are preferred increasingly when setting this to a higher value). An application for this is railway routing. Issue #6812
Added option --device.rerouting.bike-speed to compute aggregated speeds for bicycles separately. Issue #6829
Automatic train rerouting by rail signal logic can now be disabled by setting option --device.rerouting.railsignal false as well as by vehicle and vType parameters (key="device.rerouting.railsignal"). Issue #6781
Trains can now be joined in reverse order (rear part id is kept). Issue #6803
Element <busStop> now supports attribute 'parkingLength'. This can be used define the available space for stopping vehicles with parking="true" independent of the length of the busStop along the lane. Issue #3936
edgeData output now includes the new attribute 'laneDensity' which reports the density in vehs per km per lane. Issue #6840
edgeData and laneData definitions now support the new attribute 'writeAttributes' which can be used to reduce the list of output attributes to the given list of attribute names. Issue #6847
Public transport import from OSM now supports route definitions with abbreviated style. Issue #6862
Added option --save-state.rng. When this option is set, saved simulation state will include the state of all random number generators and this state will be restored upon loading. This RNG state takes up about 500kb. Issue #1418
netedit
Added new 'Data Mode' to edit files with edge and turn-related data (<edgeData>, <edgeRelation>). Issue #6461
Traffic light phase editing function 'Insert Phase' now takes successive green states into account when synthesizing transition phases. Issue #6732
sumo-gui
Missing data values (color by edgeData) can now be distinguished from negative data values. Issue #6660
<edgeRelation>-data files can now be visualized. Issue #6659
Traffic lights of type 'delay_based' can now dynamically toggle detector visualization.
Train reversals are now indicated when ''Show Route'' is active. Issue #6744
Vehicles can now be colored by 'by stop delay'. This computes the estimated departure delay at the next <stop> with an 'until' attribute. Issue #6821
Traveled distance (odometer) is now listed in the vehicle parameter dialog.
Junction name is now listed in the junction parameter dialog and can optionally by drawn in the view. Issue #6635
Lanes that explicitly allow rail and passenger traffic are now highlighted with a distinct color in the default color scheme. Issue #6844
When loading a network with internal lanes and setting the option --no-internal-links, the internal lanes are still shown. This helps to understand track topology in rail networks. Issue #6852
Visualization of a vehicles route can now be configured with the menu option 'Draw looped routes' which can be disabled to reduce clutter in looped public transport routes. Issue #6917
netconvert
Edge attribute spreadType now supports value roadCenter which aligns edges with common geometry so that the geometry reflects the middle of the road regardless of differences in lane numbers (causing natural alignment for turning lanes). Issue #1758
Added option --default.spreadtype to set the default spread type for edges. Issue #6662
Connections now support attribute ''length'' to customize the length of internal lanes. Issue #6733
Added option --default.connection-length to overwrite the length of internal lanes with a specific value. Issue #6733
Added option --railway.topology.direction-priority to assign edge priority values based on the preferred track usage direction (determined heuristically from uni-directional track).
Added node attribute 'name' to hold an optional string label. Issue #6635
Direction-specific speeds are now imported from OSM (maxspeed:forward, maxspeed:backward). Issue #6883
duarouter
When loading weights from edgeData files, arbitrary attributes can now be used with option --weight-attribute. Issue #6817
Added option --weights.priority-factor FLOAT to factor the priority of edges into the routing decision with a configurable weight (edges with higher priority are preferred increasingly when setting this to a higher value). Issue #6812
supports loading multiple data intervals. Data aggregation can be customized using options --begin, --end, --interval
supports loading multiple files (routes, edgedata, turns). The corresponding options were renamed accordingly (--route-files, --edgedata-files, --turn-files)
supports optimization by linear programming using option --optimize INT|full (requires scipy). The integer argument can be used to configure the maximum deviation from the input route distribution.
supports output of mismatch between measured counts and sampled counts for visualization in sumo-gui via edgeData and edgeRelation files using option --mismatch-output
supports direct optimization of route input (without resampling) by setting option --optimize-input
supports multi-edge counting data using <edgeRelation from="A" to="D" via="B C" count="INT"/>. Issue #6729
supports non-consecutive edgeRelations with maximum gap by using the new option --turn-max-gap . Issue #6726
supports loading origin-destination relations with the new option --od-files. Issue #6888
supports writing results with routeIDs, routeDistribution and flows instead of vehicles. Issue #6730
The turn-file format used by jtrrouter is now deprecated. Instead the new edgeRelation-file format should be used. To convert old files into the new format, the tool turnFile2EdgeRelations.py can be used. The tools jtcrouter.py and routeSampler.py will only accept the new file format as input.
netconvert
Signal references from OpenDRIVE networks are now exported as a mapping from sumo-tls-link-index to OpenDRIVE-signal-id instead of sumo-edge to OpenDRIVE-signal-name. Issue #6863
netedit
supermode hotkeys changed
F2: Network mode
F3: Demand mode
F4: Data mode
Default color for edge-geometry points changed to avoid confusion with rail signals when coloring junctions by type. Issue #6749
Fixed bug that could cause the simulation to freeze when vehicles approach a right_before_left junction from all directions simultaneously. Issue #6471 (regression in 1.4)
Fixed bug that was causing pedestrian jamming. Issue #6457
Fixed bug that was causing unsafe situations between bicycles and turning cars. Issue #6437, #6438
Fixed unsafe insertion speed when using 'stopOffset'. Issue #6411
Extra device output (emissions etc.) is now included in tripinfo-output when using option --tripinfo-output.write-unfinished. Issue #6422
Time spent parking is now included in tripinfo-output 'stopTime'. Issue #6423
Fixed lateral jump when driving across lanes with different width in a left-hand network and using sublane simulation. Issue #6573
Fixed bug where rerouting failed for no reason. Issue #6572
Fixed invalid error when loading a network where edge-IDs have non-ascii characters. Issue #6597
Text setting options 'constant size' and 'background' are now working for 'link junction index' and 'link tls index'. Issue #6376
Traffic light parameter 'running duration' is now correct when switching phases via TraCI. Issue #6520
Fixed bug where Locator-Dialog 'Center' button remained disabled after successfully locating objects via substring filtering. Issue #6593
netedit
Creating new traffic light plans where a plan already exists no longer results in invalid plans at joined traffic lights or traffic lights with signal groups. Instead a copy of the existing plan is created. Accordingly the button caption now varies between 'Create' and 'Copy'. Issue #6536, #6537
Fixed invalid position of Vehicle with negative departPos. Issue #6473
MESO
Fixed invalid simulation state when vehicles are teleporting. Issue #6408
Added option --device.fcd.radius which allows fcd output for persons and vehicles that are within the given range around equipped vehicles. Issue #6410
Added new 'taxi' device to allow simulation of demand-responsive transport. Issue #6418
Added option --step-log.period INT to set the number of simulation steps between outputs. The new default is 100 which brings a major execution speedup when running sumo on windows with step-log (where command-line output is slow). Issue #6377
Added option --fcd-output.acceleration to include acceleration values in fcd-output. When sublane simulation is enabled, attribute 'accelerationLat' is added as well. Issue #6448
Added option --lanechange-output.xy to include coordinates in lanechange-output. Issue #6588
Trips, flows, personTrips and walks with attributes fromJunction, toJunction and viaJunctions are now supported when setting option --junction-taz. Issue #6474
Calibrators can now be used to update vehicle types by defining flows with the 'type' attribute and without the 'vehsPerHour' attribute. Issue #6219
Cooperative lane changing at roundabouts can now be configured independently from other cooperation by setting the new vType attribute 'lcCooperativeRoundabout'. Issue #6565
Cooperative speed adjustment can now be configured independently from other cooperation by setting the new vType attribute 'lcCooperativeSpeed'. Issue #6534
Vehicles can now foresee speed reductions on their lane and change before being slowed down (configurable by new vType attribute 'lcSpeedGainLookahead'). Issue #6547
sumo-gui
Dead-end links in the middle of a road are now colored in magenta to highlight connectivity problems. Issue #6391
Vehicles that stop (with a <stop>) in the middle of the road now activate emergency blinkers. Issue #6608
netedit
Stacked vehicles (overlapping due to similar departPos) are now indicated by a number. Issue #6485
Stacked vehicles can now be "unstacked" by setting the option 'spread vehicles'. This spreads them alonger the lane sorted by depart time. Issue #5602
Flows are now distinguished from individual vehicles with a text caption. Issue #6486
Junctions with missing connections are now highlighted in magenta. Issue #6391
Geometry points are now clearly distinguished from junctions by color and size. Issue #6514
Traffic light mode now allows grouping and ungrouping signals. Issue #2958
Traffic light mode 'Clean States' function now also compactifies state and removes all unused indices. Issue #3828
The background grid size can now be increased and decreased with hotkeys Ctrl + Page Up, Ctrl + Page Down. Issue #6542
Demand objects (vehicles, routes, ...) can now be located by ID. Issue #5110
netconvert
Improved connection building heuristic. Issue #6295, #6467, #6468
Improved heuristic for option --junctions.join. Issue #872, Issue #5398
Improved heuristic for option --tls.guess. Issue #6512
Added options --numerical-ids.edge-start INT, --numerical-ids.node-start INT to relabel network elements with numbers starting at the given value. Issue #6372
Added option --no-turnarounds.except-turnlane which causes turnlanes to be built only if there is an exclusive (left) turn lane. Issue #6444
Added option --tls.group-signals which assigns the same signal index to connections that share the same sequence signal states. Added option --tls.ungroup-signals which reverts grouping and assigns a distinct signal index to every connection. Issue #2958
Symbolic speed limits in OSM are now supported for all countries. Issue #6566
Added option --fringe.guess to heuristically mark nodes on the outer network boundary. Issue #6624
Added option --no-turnarounds.fringe to prevent building of turnaround-connections at the network fringe. Issue #6621
Added option --ptstop-output.no-bidi to skip automatic generation of a bidi-stop on a bidirectional rail edge. Issue #6598
netgenerate
Fringe nodes are now automatically marked in grid networks when setting --grid.attach-length > 0. Issue #6622
duarouter
The maximum map-matching distance is now configurable using option --mapmatch.distance. Also, mapmatching with large distance is now computationally efficient. Issue #6476
Trip, flows, personTrips and walks with attributes fromJunction,toJunction and viaJunctions are now supported when setting option --junction-taz. Issue #6474
Trips can now be written with attributes fromJunction and toJunction and viaJunctions by setting option --write-trips.junctions. Issue #6474
When using trip attributes fromXY, fromLonLat, etc. the given positions can now be mapped to junctions instead of edges by setting option --mapmatch.junctions. Issue #6475
jtrrouter
Added option --sources-are-sinks (shortcut -S). When this option is set, all flows will terminate upon reaching the from-edge of another flow. Issue #6601
Added option --discount-sources (shortcut -D). When this option is set, the flow departing at an edge will be reduced by the amount of traffic that has reached this edge from upstream flows. When combined with option --sources-are-sinks, upstream flows will terminate at a downstream edge when the source flow number has been reached. This can be used to build a scenario from flow counts at arbitrary locations. Issue #6601
TraCI / Libsumo
Added context subscription filter that filters in a given range around the vehicles route 'addSubscriptionFilterLateralDistance'. Issue #6287
Added new tool jtcrouter.py to build a traffic demand scenario based on turn-count data (this uses jtrrouter in the background). Issue #6229
Added new tool routeSampler.py to build a traffic demand scenario based on turn-count and edge-count data. This tool samples from a given set of routes to meet the detected counts. Issue #6616
the settings file no longer accepts the element breakpoints-file (command line option is still there)
renamed attributes in the settings (breakpoint.value to breakpoint.time and decal.filename to decal.file)
Default settings values 'show link junction index' and 'show link tls index' changed because their interpretation varies after #6376. Old GUI-setting files must be updated to achieve the default look.
Simulation
When defining automated switching between traffic light programs, switch times are no longer wrapped to fit into a single day (modulo). The replace the old behavior, set the new waut attribute period="86400". Issue #6522
TraCI
traci.lane.getLinks (python) now returns the extended descriptions by default, the older behavior should not be used anymore (but is still available using a second parameter)
