Builds trigger objects for guisim. More...

#include <GUITriggerBuilder.h>

Inheritance diagram for GUITriggerBuilder:

Collaboration diagram for GUITriggerBuilder:

Public Member Functions
void	buildVaporizer (const SUMOSAXAttributes &attrs)
	Builds a vaporization. More...

	GUITriggerBuilder ()
	Constructor. More...

void	setHandler (NLHandler *handler)
	Sets the parent handler to use for nested parsing. More...

	~GUITriggerBuilder ()
	Destructor. More...

parsing methods
These methods parse the attributes for each of the described trigger and call the according methods to build the trigger
void	parseAndBuildLaneSpeedTrigger (MSNet &net, const SUMOSAXAttributes &attrs, const std::string &base)
	Parses his values and builds a lane speed trigger. More...

void	parseAndBuildRerouter (MSNet &net, const SUMOSAXAttributes &attrs)
	Parses his values and builds a rerouter. More...

void	parseAndBuildStoppingPlace (MSNet &net, const SUMOSAXAttributes &attrs, const SumoXMLTag element)
	Parses the values and builds a stopping places for busses, trains or container vehicles. More...

void	addLotEntry (double x, double y, double z, double width, double length, double angle, double slope)
	Add a lot entry to current parking area. More...

void	addAccess (MSNet &net, const SUMOSAXAttributes &attrs)
	Parses the values and adds an access point to the currently parsed stopping place. More...

void	parseAndBeginParkingArea (MSNet &net, const SUMOSAXAttributes &attrs)
	Parses his values and builds a parking area. More...

void	parseAndAddLotEntry (const SUMOSAXAttributes &attrs)
	Parses his values and adds a lot entry to current parking area. More...

void	parseAndBuildChargingStation (MSNet &net, const SUMOSAXAttributes &attrs)
	Parses his values and builds a charging station. More...

void	parseAndBuildOverheadWireSegment (MSNet &net, const SUMOSAXAttributes &attrs)
	Parses its values and builds an overhead wire segment. More...

void	parseAndBuildOverheadWireSection (MSNet &net, const SUMOSAXAttributes &attrs)
	Parses its values and builds an overhead wire section. More...

void	parseAndBuildTractionSubstation (MSNet &net, const SUMOSAXAttributes &attrs)
	Parses its values and builds a traction substation. More...

void	parseAndBuildOverheadWireClamp (MSNet &net, const SUMOSAXAttributes &attrs)
	Parses its values and builds an overhead wire clamp. More...

void	parseAndBuildCalibrator (MSNet &net, const SUMOSAXAttributes &attrs, const std::string &base)
	Parses his values and builds a mesoscopic or microscopic calibrator. More...

void	updateParkingAreaDefaultCapacity ()
	updates the parkingArea default capacity More...

MSStoppingPlace *	getCurrentStop ()

Protected Member Functions
void	endParkingArea () override
	End a parking area (it must be added to the SUMORTree after all parking spaces are loaded. More...

void	endStoppingPlace () override
	End a stopping place. More...

building methods
Override NLTriggerBuilder-methods for building guisim-objects See also NLTriggerBuilder
MSLaneSpeedTrigger *	buildLaneSpeedTrigger (MSNet &net, const std::string &id, const std::vector< MSLane * > &destLanes, const std::string &file) override
	Builds a lane speed trigger. More...

MSTriggeredRerouter *	buildRerouter (MSNet &net, const std::string &id, MSEdgeVector &edges, double prob, bool off, bool optional, SUMOTime timeThreshold, const std::string &vTypes, const Position &pos) override
	builds an rerouter More...

void	buildStoppingPlace (MSNet &net, std::string id, std::vector< std::string > lines, MSLane *lane, double frompos, double topos, const SumoXMLTag element, std::string string, int personCapacity, double parkingLength, RGBColor &color) override
	Builds a bus stop. More...

void	beginParkingArea (MSNet &net, const std::string &id, const std::vector< std::string > &lines, const std::vector< std::string > &badges, MSLane *lane, double frompos, double topos, unsigned int capacity, double width, double length, double angle, const std::string &name, bool onRoad, const std::string &departPos, bool lefthand) override
	Builds a parking area. More...

void	buildChargingStation (MSNet &net, const std::string &id, MSLane lane, double frompos, double topos, const std::string &name, double chargingPower, double efficiency, bool chargeInTransit, SUMOTime chargeDelay, std::string chargeType, SUMOTime waitingTime, MSParkingArea parkingArea) override
	Builds a charging station. More...

void	buildOverheadWireSegment (MSNet &net, const std::string &id, MSLane *lane, double frompos, double topos, bool voltageSource) override
	Builds an overhead wire segment. More...

void	buildOverheadWireClamp (MSNet &net, const std::string &id, MSLane lane_start, MSLane lane_end) override
	Builds an overhead wire clamp. More...

building methods
Called with parsed values, these methods build the trigger. These methods should be overriden for the gui loader in order to build visualizable versions of the triggers. In most cases, these methods only call the constructor.
void	buildInnerOverheadWireSegments (MSNet &net, const MSLane connection, const MSLane frontConnection, const MSLane *behindConnection)
	Builds an overhead wire inner segments. More...

void	buildTractionSubstation (MSNet &net, std::string id, double voltage, double currentLimit)
	Builds a traction substation. More...

virtual MSCalibrator *	buildCalibrator (const std::string &id, MSEdge edge, MSLane lane, MSJunction node, double pos, const std::string &file, const std::string &outfile, const SUMOTime freq, const MSRouteProbe probe, const double invalidJamThreshold, const std::string &vTypes, const bool local)
	builds a microscopic calibrator More...

virtual METriggeredCalibrator *	buildMECalibrator (const std::string &id, MSEdge edge, double pos, const std::string &file, const std::string &outfile, const SUMOTime freq, MSRouteProbe probe, const double invalidJamThreshold, const std::string &vTypes)
	builds a mesoscopic calibrator More...

helper method for obtaining and checking values
std::string	getFileName (const SUMOSAXAttributes &attrs, const std::string &base, const bool allowEmpty=false)
	Helper method to obtain the filename. More...

MSLane *	getLane (const SUMOSAXAttributes &attrs, const std::string &tt, const std::string &tid)
	Returns the lane defined by attribute "lane". More...

MSParkingArea *	getParkingArea (const SUMOSAXAttributes &attrs, const std::string &tt, const std::string &tid)
	Returns the parking area defined by attribute "parkingArea". More...

double	getPosition (const SUMOSAXAttributes &attrs, MSLane lane, const std::string &tt, const std::string &tid, MSEdge edge=0)
	returns the position on the lane checking it More...

Protected Attributes
MSStoppingPlace *	myCurrentStop
	The currently parsed stop to add access points to. More...

NLHandler *	myHandler
	The parent handler to set for subhandlers. More...

bool	myHaveWarnedAboutEigen = false

MSParkingArea *	myParkingArea
	definition of the currently parsed parking area More...

bool	myParkingAreaCapacitySet = false

Detailed Description

Builds trigger objects for guisim.

Definition at line 49 of file GUITriggerBuilder.h.

Constructor & Destructor Documentation

◆ GUITriggerBuilder()

GUITriggerBuilder::GUITriggerBuilder ( )

Constructor.

Definition at line 43 of file GUITriggerBuilder.cpp.

◆ ~GUITriggerBuilder()

GUITriggerBuilder::~GUITriggerBuilder ( )

Destructor.

Definition at line 46 of file GUITriggerBuilder.cpp.

Member Function Documentation

◆ addAccess()

void NLTriggerBuilder::addAccess	(	MSNet &	net,
		const SUMOSAXAttributes &	attrs
	)

inherited

Parses the values and adds an access point to the currently parsed stopping place.

Parameters

[in]	net	The network the stop belongs to
[in]	attrs	SAX-attributes which define the access

Exceptions

InvalidArgument If a parameter (lane/position) is not valid

Definition at line 526 of file NLTriggerBuilder.cpp.

References MSStoppingPlace::addAccess(), MSLane::allowsVehicleClass(), MSStoppingPlace::CARRIAGE, SUMORouteHandler::checkStopPos(), MSStoppingPlace::DOORS, Named::getID(), NLTriggerBuilder::getLane(), MSLane::getLength(), SUMOSAXAttributes::getOpt(), SUMOSAXAttributes::getString(), NLTriggerBuilder::myCurrentStop, NLTriggerBuilder::myHandler, MSStoppingPlace::PLATFORM, SUMO_ATTR_FRIENDLY_POS, SUMO_ATTR_LENGTH, SUMO_ATTR_POSITION, SVC_PEDESTRIAN, TL, and WRITE_WARNINGF.

Referenced by NLHandler::myStartElement().

Here is the caller graph for this function:

◆ addLotEntry()

void NLTriggerBuilder::addLotEntry	(	double	x,
		double	y,
		double	z,
		double	width,
		double	length,
		double	angle,
		double	slope
	)

inherited

Add a lot entry to current parking area.

Simply calls the addLotEntry method for current parking area.

Parameters

[in]	x	X position of the lot center
[in]	y	Y position of the lot center
[in]	z	Z position of the lot center
[in]	width	Width of the lot rectangle
[in]	length	Length of the lot rectangle
[in]	angle	Angle of the lot rectangle
[in]	slope	Slope of the lot rectangle

Exceptions

InvalidArgument If the current parking area is 0

Definition at line 838 of file NLTriggerBuilder.cpp.

References MSParkingArea::addLotEntry(), NLTriggerBuilder::myParkingArea, NLTriggerBuilder::myParkingAreaCapacitySet, and MSParkingArea::parkOnRoad().

Referenced by NLTriggerBuilder::parseAndAddLotEntry().

Here is the caller graph for this function:

◆ beginParkingArea()

void GUITriggerBuilder::beginParkingArea	(	MSNet &	net,
		const std::string &	id,
		const std::vector< std::string > &	lines,
		const std::vector< std::string > &	badges,
		MSLane *	lane,
		double	frompos,
		double	topos,
		unsigned int	capacity,
		double	width,
		double	length,
		double	angle,
		const std::string &	name,
		bool	onRoad,
		const std::string &	departPos,
		bool	lefthand
	)

overrideprotectedvirtual

Builds a parking area.

Simply calls the GUIParkingArea constructor.

Parameters

[in]	net	The net the parking area belongs to
[in]	id	The id of the parking area
[in]	lines	Names of the lines that halt on this parking area
[in]	badges	Names which grant access to this parking area
[in]	lane	The lane the parking area is placed on
[in]	frompos	Begin position of the parking area on the lane
[in]	topos	End position of the parking area on the lane
[in]	capacity	Capacity of the parking area
[in]	width	Width of the default lot rectangle
[in]	length	Length of the default lot rectangle
[in]	angle	Angle of the default lot rectangle

Exceptions

InvalidArgument If the parking area can not be added to the net (is duplicate)

Reimplemented from NLTriggerBuilder.

Definition at line 83 of file GUITriggerBuilder.cpp.

References MSNet::addStoppingPlace(), NLTriggerBuilder::myParkingArea, and SUMO_TAG_PARKING_AREA.

◆ buildCalibrator()

MSCalibrator * NLTriggerBuilder::buildCalibrator	(	const std::string &	id,
		MSEdge *	edge,
		MSLane *	lane,
		MSJunction *	node,
		double	pos,
		const std::string &	file,
		const std::string &	outfile,
		const SUMOTime	freq,
		const MSRouteProbe *	probe,
		const double	invalidJamThreshold,
		const std::string &	vTypes,
		const bool	local
	)

protectedvirtualinherited

builds a microscopic calibrator

Simply calls the MSCalibrator constructor.

Parameters

[in]	id	The id of the calibrator
[in]	edge	The edge the calibrator is placed at
[in]	lane	The lane the calibrator is placed at if it is lane specific, nullptr otherwise
[in]	pos	The position on the edge the calibrator lies at
[in]	file	The file to read the flows from
[in]	outfile	The file to write calibrator statistics to
[in]	freq	The frequency for the statistics output
[in]	probe	an optional route probe to get distributions from
[in]	invalidJamThreshold	stop calibrating if the relative speed drops below the threshold
[in]	vTypes	to which vehicle types the calibrator applies

Todo:: Is the position correct/needed

Definition at line 777 of file NLTriggerBuilder.cpp.

References MSEdge::getLength().

Referenced by NLTriggerBuilder::parseAndBuildCalibrator().

Here is the caller graph for this function:

◆ buildChargingStation()

void GUITriggerBuilder::buildChargingStation	(	MSNet &	net,
		const std::string &	id,
		MSLane *	lane,
		double	frompos,
		double	topos,
		const std::string &	name,
		double	chargingPower,
		double	efficiency,
		bool	chargeInTransit,
		SUMOTime	chargeDelay,
		std::string	chargeType,
		SUMOTime	waitingTime,
		MSParkingArea *	parkingArea
	)

overrideprotectedvirtual

Builds a charging station.

Simply calls the GUIChargingStation constructor.

Parameters

[in]	net	The net the charging station belongs to
[in]	id	The id of the charging station
[in]	lane	The lane the charging station is placed on
[in]	frompos	Begin position of the charging station on the lane
[in]	topos	End position of the charging station on the lane
[in]	chargingPower	energy charged in every timeStep
[in]	efficiency	efficiency of the charge
[in]	chargeInTransit	enable or disable charge in transit
[in]	chargeDelay	delay in the charge
[in]	chargeType	charge type (normal, electric or fuel)
[in]	waitingTime	waiting time until start charging
[in]	parkingArea	The associated parking area

Exceptions

InvalidArgument If the charging station can not be added to the net (is duplicate)

Reimplemented from NLTriggerBuilder.

Definition at line 105 of file GUITriggerBuilder.cpp.

References MSNet::addStoppingPlace(), NLTriggerBuilder::myCurrentStop, and SUMO_TAG_CHARGING_STATION.

◆ buildInnerOverheadWireSegments()

void NLTriggerBuilder::buildInnerOverheadWireSegments	(	MSNet &	net,
		const MSLane *	connection,
		const MSLane *	frontConnection,
		const MSLane *	behindConnection
	)

protectedinherited

Builds an overhead wire inner segments.

Simply calls the buildOverheadWireSegment for inner edges connection, frontConnection and behindConnection if exists.

Parameters

[in]	net	The net the overhead wire inner segments belongs to
[in]	connection	The inner lane that connects two regular lanes, or a regular lane with the inner "behindConnection" lane, or the inner "frontConnection" lane with a regular lane, or the inner "frontConnection" lane with the inner "behindConnection" lane
[in]	frontConnection	The inner lane that connects a regular lane with the inner "connection" lane
[in]	behindConnection	The inner lane that connects the inner "connection" lane with a regular lane

Exceptions

InvalidArgument If the over can not be added to the net (is duplicate according to the id)

Definition at line 901 of file NLTriggerBuilder.cpp.

References NLTriggerBuilder::buildOverheadWireSegment(), Named::getID(), and MSLane::getLength().

Referenced by NLTriggerBuilder::parseAndBuildOverheadWireSection().

Here is the caller graph for this function:

◆ buildLaneSpeedTrigger()

MSLaneSpeedTrigger * GUITriggerBuilder::buildLaneSpeedTrigger	(	MSNet &	net,
		const std::string &	id,
		const std::vector< MSLane * > &	destLanes,
		const std::string &	file
	)

overrideprotectedvirtual

Builds a lane speed trigger.

Simply calls the GUILaneSpeedTrigger constructor.

Parameters

[in]	net	The net the lane speed trigger belongs to
[in]	id	The id of the lane speed trigger
[in]	destLanes	List of lanes affected by this speed trigger
[in]	file	Name of the file to read the speeds to set from

See also: MSLaneSpeedTrigger

Exceptions

ProcessError If the XML definition file is erroneous

Reimplemented from NLTriggerBuilder.

Definition at line 50 of file GUITriggerBuilder.cpp.

◆ buildMECalibrator()

METriggeredCalibrator * NLTriggerBuilder::buildMECalibrator	(	const std::string &	id,
		MSEdge *	edge,
		double	pos,
		const std::string &	file,
		const std::string &	outfile,
		const SUMOTime	freq,
		MSRouteProbe *	probe,
		const double	invalidJamThreshold,
		const std::string &	vTypes
	)

protectedvirtualinherited

builds a mesoscopic calibrator

Simply calls the METriggeredCalibrator constructor.

Parameters

[in]	id	The id of the calibrator
[in]	edge	The edge the calibrator is placed at
[in]	pos	The position on the edge the calibrator lies at
[in]	file	The file to read the flows from
[in]	outfile	The file to write calibrator statistics to
[in]	freq	The frequency for the statistics output
[in]	probe	an optional route probe to get distributions from
[in]	invalidJamThreshold	stop calibrating if the relative speed drops below the threshold
[in]	vTypes	to which vehicle types the calibrator applies

Todo:: Is the position correct/needed

Definition at line 761 of file NLTriggerBuilder.cpp.

References MSGlobals::gMesoNet.

Referenced by NLTriggerBuilder::parseAndBuildCalibrator().

Here is the caller graph for this function:

◆ buildOverheadWireClamp()

void GUITriggerBuilder::buildOverheadWireClamp	(	MSNet &	net,
		const std::string &	id,
		MSLane *	lane_start,
		MSLane *	lane_end
	)

overrideprotectedvirtual

Builds an overhead wire clamp.

Simply calls the GUIOverheadWireClamp constructor and adds the result to the network.

Parameters

[in]	net	The net the overhead wire clamp belongs to
[in]	id	The id of the overhead wire clamp
[in]	lane_start	The lane, where is the overhead wire segment placed, to the start of which the overhead wire clamp is connected
[in]	lane_end	The lane, where is the overhead wire segment placed, to the end of which the overhead wire clamp is connected

Reimplemented from NLTriggerBuilder.

Definition at line 132 of file GUITriggerBuilder.cpp.

◆ buildOverheadWireSegment()

void GUITriggerBuilder::buildOverheadWireSegment	(	MSNet &	net,
		const std::string &	id,
		MSLane *	lane,
		double	frompos,
		double	topos,
		bool	voltageSource
	)

overrideprotectedvirtual

Builds an overhead wire segment.

Simply calls the GUIOverheadWire constructor and adds the result to the network.

Parameters

[in]	net	The net the overhead wire segment belongs to
[in]	id	The id of the overhead wire segment
[in]	lane	The lane the overhead wire segment is placed on
[in]	frompos	Begin position of the overhead wire segment on the lane
[in]	topos	End position of the overhead wire segment on the lane
[in]	voltageSource	If the segment is the place of the connection of a traction substation

Exceptions

InvalidArgument If the overhead wire segment can not be added to the net (is duplicate according to the id)

Reimplemented from NLTriggerBuilder.

Definition at line 121 of file GUITriggerBuilder.cpp.

References MSNet::addStoppingPlace(), and SUMO_TAG_OVERHEAD_WIRE_SEGMENT.

◆ buildRerouter()

MSTriggeredRerouter * GUITriggerBuilder::buildRerouter	(	MSNet &	net,
		const std::string &	id,
		MSEdgeVector &	edges,
		double	prob,
		bool	off,
		bool	optional,
		SUMOTime	timeThreshold,
		const std::string &	vTypes,
		const Position &	pos
	)

overrideprotectedvirtual

builds an rerouter

Simply calls the GUITriggeredRerouter constructor.

Parameters

[in]	net	The net the rerouter belongs to
[in]	id	The id of the rerouter
[in]	edges	The edges the rerouter is placed at
[in]	prob	The probability the rerouter reroutes vehicles with

Reimplemented from NLTriggerBuilder.

Definition at line 60 of file GUITriggerBuilder.cpp.

◆ buildStoppingPlace()

void GUITriggerBuilder::buildStoppingPlace	(	MSNet &	net,
		std::string	id,
		std::vector< std::string >	lines,
		MSLane *	lane,
		double	frompos,
		double	topos,
		const SumoXMLTag	element,
		std::string	string,
		int	personCapacity,
		double	parkingLength,
		RGBColor &	color
	)

overrideprotectedvirtual

Builds a bus stop.

Simply calls the GUIBusStop / GUIContainerStop constructor.

Parameters

[in]	net	The net the stop belongs to
[in]	id	The id of the stop
[in]	lines	Names of the lines that halt on this stop
[in]	lane	The lane the stop is placed on
[in]	frompos	Begin position of the stop on the lane
[in]	topos	End position of the stop on the lane
[in]	element	which kind of stop is to be built

Exceptions

InvalidArgument If the stop can not be added to the net (is duplicate)

Reimplemented from NLTriggerBuilder.

Definition at line 70 of file GUITriggerBuilder.cpp.

References MSNet::addStoppingPlace(), NLTriggerBuilder::myCurrentStop, and toString().

◆ buildTractionSubstation()

void NLTriggerBuilder::buildTractionSubstation	(	MSNet &	net,
		std::string	id,
		double	voltage,
		double	currentLimit
	)

protectedinherited

Builds a traction substation.

Simply calls the MSTractionSubstaion cosnstructor and adds the substation to the list of substations in the net.

Parameters

[in]	net	The net the traction substation belongs to
[in]	id	The id of the traction substation
[in]	voltage	The voltage level of the voltage source representing the traction substation
[in]	currentLimit	The electric current limit(max current flowing from(through) the traction substation)

Exceptions

InvalidArgument If the over can not be added to the net (is duplicate according to the id)

Definition at line 918 of file NLTriggerBuilder.cpp.

References MSNet::addTractionSubstation().

Referenced by NLTriggerBuilder::parseAndBuildTractionSubstation().

Here is the caller graph for this function:

◆ buildVaporizer()

void NLTriggerBuilder::buildVaporizer ( const SUMOSAXAttributes & attrs )

inherited

Builds a vaporization.

Parses the attributes, reporting errors if the time values are false or the edge is not known. Instatiates events for enabling and disabling the vaporization otherwise.

Parameters

[in] attrs SAX-attributes which define the vaporizer

Note: recheck throwing the exception

Definition at line 73 of file NLTriggerBuilder.cpp.

References MSEventControl::addEvent(), MSEdge::decVaporization(), MSEdge::dictionary(), SUMOSAXAttributes::get(), MSNet::getBeginOfTimestepEvents(), MSNet::getInstance(), OptionsCont::getOptions(), SUMOSAXAttributes::getSUMOTimeReporting(), MSEdge::incVaporization(), string2time(), SUMO_ATTR_BEGIN, SUMO_ATTR_END, SUMO_ATTR_ID, TL, WRITE_ERRORF, and WRITE_WARNING.

Referenced by NLHandler::myStartElement().

Here is the caller graph for this function:

◆ endParkingArea()

void GUITriggerBuilder::endParkingArea ( )

overrideprotectedvirtual

End a parking area (it must be added to the SUMORTree after all parking spaces are loaded.

Reimplemented from NLTriggerBuilder.

Definition at line 139 of file GUITriggerBuilder.cpp.

References MSNet::getInstance(), and NLTriggerBuilder::myParkingArea.

◆ endStoppingPlace()

void GUITriggerBuilder::endStoppingPlace ( )

overrideprotectedvirtual

End a stopping place.

Exceptions

InvalidArgument If the current stopping place is 0

Reimplemented from NLTriggerBuilder.

Definition at line 150 of file GUITriggerBuilder.cpp.

References MSNet::getInstance(), and NLTriggerBuilder::myCurrentStop.

◆ getCurrentStop()

MSStoppingPlace * NLTriggerBuilder::getCurrentStop ( )

inherited

Definition at line 1029 of file NLTriggerBuilder.cpp.

References NLTriggerBuilder::myCurrentStop, and NLTriggerBuilder::myParkingArea.

Referenced by NLHandler::myStartElement().

Here is the caller graph for this function:

◆ getFileName()

std::string NLTriggerBuilder::getFileName	(	const SUMOSAXAttributes &	attrs,
		const std::string &	base,
		const bool	allowEmpty = `false`
	)

protectedinherited

Helper method to obtain the filename.

Retrieves "file" from attributes, checks whether it is absolute and extends it by the given base path if not. Returns this information.

Parameters

[in]	attrs	The attributes to obtain the file name from
[in]	base	The base path (the path the loaded additional file lies in)

Returns: The (expanded) path to the named file

Todo:: Recheck usage of the helper class

Definition at line 931 of file NLTriggerBuilder.cpp.

References FileHelpers::getConfigurationRelative(), SUMOSAXAttributes::getOpt(), FileHelpers::isAbsolute(), and SUMO_ATTR_FILE.

Referenced by NLTriggerBuilder::parseAndBuildCalibrator(), and NLTriggerBuilder::parseAndBuildLaneSpeedTrigger().

Here is the caller graph for this function:

◆ getLane()

MSLane * NLTriggerBuilder::getLane	(	const SUMOSAXAttributes &	attrs,
		const std::string &	tt,
		const std::string &	tid
	)

protectedinherited

Returns the lane defined by attribute "lane".

Retrieves the lane id from the given attrs. Tries to retrieve the lane, throws an InvalidArgument if it does not exist.

Parameters

[in]	attrs	The attributes to obtain the lane id from
[in]	tt	The trigger type (for user output)
[in]	tid	The trigger id (for user output)

Returns: The named lane if it is known

Exceptions

InvalidArgument If the named lane does not exist or a lane is not named

Definition at line 952 of file NLTriggerBuilder.cpp.

References MSLane::dictionary(), SUMOSAXAttributes::get(), MSGlobals::gUsingInternalLanes, and SUMO_ATTR_LANE.

Referenced by NLTriggerBuilder::addAccess(), NLTriggerBuilder::parseAndBeginParkingArea(), NLTriggerBuilder::parseAndBuildCalibrator(), NLTriggerBuilder::parseAndBuildChargingStation(), NLTriggerBuilder::parseAndBuildOverheadWireSegment(), and NLTriggerBuilder::parseAndBuildStoppingPlace().

Here is the caller graph for this function:

◆ getParkingArea()

MSParkingArea * NLTriggerBuilder::getParkingArea	(	const SUMOSAXAttributes &	attrs,
		const std::string &	tt,
		const std::string &	tid
	)

protectedinherited

Returns the parking area defined by attribute "parkingArea".

Retrieves the parking area id from the given attrs. Tries to retrieve the parking area, throws an InvalidArgument if it does not exist.

Parameters

[in]	attrs	The attributes to obtain the parking area id from
[in]	tt	The trigger type (for user output)
[in]	tid	The trigger id (for user output)

Returns: The named parking area if it is known, nullptr if empty ID is given

Exceptions

InvalidArgument If the named parking area does not exist

Definition at line 973 of file NLTriggerBuilder.cpp.

References MSNet::getInstance(), SUMOSAXAttributes::getOpt(), MSNet::getStoppingPlace(), SUMO_ATTR_PARKING_AREA, and SUMO_TAG_PARKING_AREA.

Referenced by NLTriggerBuilder::parseAndBuildChargingStation().

Here is the caller graph for this function:

◆ getPosition()

double NLTriggerBuilder::getPosition	(	const SUMOSAXAttributes &	attrs,
		MSLane *	lane,
		const std::string &	tt,
		const std::string &	tid,
		MSEdge *	edge = `0`
	)

protectedinherited

returns the position on the lane checking it

This method extracts the position, checks whether it shall be mirrored and checks whether it is within the lane. If not, an error is reported and a InvalidArgument is thrown.

Parameters

[in]	attrs	The attributes to obtain the position from
[in]	lane	The lane the position shall be valid for
[in]	tt	The trigger type (for user output)
[in]	tid	The trigger id (for user output)

Returns: The position on the lane

Exceptions

InvalidArgument If the position is beyond the lane

Definition at line 990 of file NLTriggerBuilder.cpp.

References SUMOSAXAttributes::get(), Named::getID(), MSEdge::getLength(), MSLane::getLength(), SUMOSAXAttributes::getOpt(), SUMO_ATTR_FRIENDLY_POS, and SUMO_ATTR_POSITION.

Referenced by NLTriggerBuilder::parseAndBuildCalibrator().

Here is the caller graph for this function:

◆ parseAndAddLotEntry()

void NLTriggerBuilder::parseAndAddLotEntry ( const SUMOSAXAttributes & attrs )

inherited

Parses his values and adds a lot entry to current parking area.

Parameters

[in] attrs SAX-attributes which define the lot entry

Definition at line 596 of file NLTriggerBuilder.cpp.

References NLTriggerBuilder::addLotEntry(), SUMOSAXAttributes::get(), MSParkingArea::getAngle(), MSParkingArea::getLength(), SUMOSAXAttributes::getOpt(), MSParkingArea::getWidth(), NLTriggerBuilder::myParkingArea, SUMO_ATTR_ANGLE, SUMO_ATTR_LENGTH, SUMO_ATTR_SLOPE, SUMO_ATTR_WIDTH, SUMO_ATTR_X, SUMO_ATTR_Y, and SUMO_ATTR_Z.

Referenced by NLHandler::myStartElement().

Here is the caller graph for this function:

◆ parseAndBeginParkingArea()

void NLTriggerBuilder::parseAndBeginParkingArea	(	MSNet &	net,
		const SUMOSAXAttributes &	attrs
	)

inherited

Parses his values and builds a parking area.

Parameters

[in]	net	The network the parking area belongs to
[in]	attrs	SAX-attributes which define the trigger

Exceptions

InvalidArgument If a parameter (lane/position) is not valid

Definition at line 561 of file NLTriggerBuilder.cpp.

References NLTriggerBuilder::beginParkingArea(), SUMORouteHandler::checkStopPos(), SUMOSAXAttributes::get(), NLTriggerBuilder::getLane(), MSLane::getLength(), SUMOSAXAttributes::getOpt(), SUMOSAXAttributes::hasAttribute(), NLTriggerBuilder::myHandler, NLTriggerBuilder::myParkingAreaCapacitySet, SUMO_ATTR_ACCEPTED_BADGES, SUMO_ATTR_ANGLE, SUMO_ATTR_DEPARTPOS, SUMO_ATTR_ENDPOS, SUMO_ATTR_FRIENDLY_POS, SUMO_ATTR_ID, SUMO_ATTR_LEFTHAND, SUMO_ATTR_LENGTH, SUMO_ATTR_LINES, SUMO_ATTR_NAME, SUMO_ATTR_ONROAD, SUMO_ATTR_ROADSIDE_CAPACITY, SUMO_ATTR_STARTPOS, and SUMO_ATTR_WIDTH.

Referenced by NLHandler::myStartElement().

Here is the caller graph for this function:

◆ parseAndBuildCalibrator()

void NLTriggerBuilder::parseAndBuildCalibrator	(	MSNet &	net,
		const SUMOSAXAttributes &	attrs,
		const std::string &	base
	)

inherited

Parses his values and builds a mesoscopic or microscopic calibrator.

Parameters

[in]	net	The network the calibrator belongs to
[in]	attrs	SAX-attributes which define the trigger
[in]	base	The base path

Exceptions

InvalidArgument If a parameter (edge/position) is not valid

Definition at line 622 of file NLTriggerBuilder.cpp.

References NLTriggerBuilder::buildCalibrator(), NLTriggerBuilder::buildMECalibrator(), DELTA_T, MSEdge::dictionary(), NamedObjectCont< T >::get(), SUMOSAXAttributes::get(), MSNet::getDetectorControl(), MSLane::getEdge(), NLTriggerBuilder::getFileName(), Named::getID(), MSNet::getJunctionControl(), NLTriggerBuilder::getLane(), MSEdge::getLanes(), SUMOSAXAttributes::getOpt(), SUMOSAXAttributes::getOptPeriod(), NLTriggerBuilder::getPosition(), MSDetectorControl::getTypedDetectors(), MSGlobals::gUseMesoSim, SUMOSAXAttributes::hasAttribute(), NLTriggerBuilder::myHandler, GenericSAXHandler::registerParent(), SUMO_ATTR_EDGE, SUMO_ATTR_ID, SUMO_ATTR_JAM_DIST_THRESHOLD, SUMO_ATTR_LANE, SUMO_ATTR_LOCAL, SUMO_ATTR_NODE, SUMO_ATTR_OUTPUT, SUMO_ATTR_ROUTEPROBE, SUMO_ATTR_VTYPES, SUMO_TAG_CALIBRATOR, SUMO_TAG_ROUTEPROBE, and WRITE_WARNING.

Referenced by NLHandler::myStartElement().

Here is the caller graph for this function:

◆ parseAndBuildChargingStation()

void NLTriggerBuilder::parseAndBuildChargingStation	(	MSNet &	net,
		const SUMOSAXAttributes &	attrs
	)

inherited

Parses his values and builds a charging station.

Parameters

[in]	net	The network the charging station belongs to
[in]	attrs	SAXattributes which define the trigger

Exceptions

InvalidArgument If a parameter (lane/position) is not valid

Definition at line 147 of file NLTriggerBuilder.cpp.

References NLTriggerBuilder::buildChargingStation(), SUMORouteHandler::checkStopPos(), SUMOSAXAttributes::get(), NLTriggerBuilder::getLane(), MSLane::getLength(), SUMOSAXAttributes::getOpt(), SUMOSAXAttributes::getOptSUMOTimeReporting(), NLTriggerBuilder::getParkingArea(), NLTriggerBuilder::myHandler, SUMO_ATTR_CHARGEDELAY, SUMO_ATTR_CHARGEINTRANSIT, SUMO_ATTR_CHARGETYPE, SUMO_ATTR_CHARGINGPOWER, SUMO_ATTR_EFFICIENCY, SUMO_ATTR_ENDPOS, SUMO_ATTR_FRIENDLY_POS, SUMO_ATTR_ID, SUMO_ATTR_NAME, SUMO_ATTR_STARTPOS, and SUMO_ATTR_WAITINGTIME.

Referenced by NLHandler::myStartElement().

Here is the caller graph for this function:

◆ parseAndBuildLaneSpeedTrigger()

void NLTriggerBuilder::parseAndBuildLaneSpeedTrigger	(	MSNet &	net,
		const SUMOSAXAttributes &	attrs,
		const std::string &	base
	)

inherited

Parses his values and builds a lane speed trigger.

If one of the declaration values is errornous, an InvalidArgument is thrown.

If the XML-file parsed during initialisation is errornous, and the MSLaneSpeedTrigger-constructor throws a ProcessError due to this, this exception is catched and an InvalidArgument with the message given in the ProcessError is thrown.

Parameters

[in]	net	The network the lane speed trigger belongs to
[in]	attrs	SAX-attributes which define the trigger
[in]	base	The base path

Exceptions

InvalidArgument If a parameter (lane/position) is not valid or the read definition is errornous

See also: buildLaneSpeedTrigger

Definition at line 109 of file NLTriggerBuilder.cpp.

References NLTriggerBuilder::buildLaneSpeedTrigger(), MSLane::dictionary(), SUMOSAXAttributes::get(), NLTriggerBuilder::getFileName(), NLTriggerBuilder::myHandler, GenericSAXHandler::registerParent(), SUMO_ATTR_ID, SUMO_ATTR_LANES, and SUMO_TAG_VSS.

Referenced by NLHandler::myStartElement().

Here is the caller graph for this function:

◆ parseAndBuildOverheadWireClamp()

void NLTriggerBuilder::parseAndBuildOverheadWireClamp	(	MSNet &	net,
		const SUMOSAXAttributes &	attrs
	)

inherited

Parses its values and builds an overhead wire clamp.

An overhead wire clamp is a conductive connection of wires in the opposite direction over the road

Parameters

[in]	net	The network the overhead wire clamp belongs to
[in]	attrs	SAXattributes which define the trigger

Exceptions

InvalidArgument If the traction substation is not found in the net or if the start or end segment belongs to a different traction substation

Definition at line 426 of file NLTriggerBuilder.cpp.

References MSTractionSubstation::addClamp(), MSTractionSubstation::findClamp(), MSNet::findTractionSubstation(), SUMOSAXAttributes::get(), MSNet::getInstance(), MSNet::getStoppingPlace(), MSGlobals::gOverheadWireSolver, SUMO_ATTR_ID, SUMO_ATTR_OVERHEAD_WIRE_CLAMP_END, SUMO_ATTR_OVERHEAD_WIRE_CLAMP_START, SUMO_ATTR_SUBSTATIONID, SUMO_TAG_OVERHEAD_WIRE_SEGMENT, TL, UNUSED_PARAMETER, WRITE_ERROR, and WRITE_WARNING.

Referenced by NLHandler::myStartElement().

Here is the caller graph for this function:

◆ parseAndBuildOverheadWireSection()

void NLTriggerBuilder::parseAndBuildOverheadWireSection	(	MSNet &	net,
		const SUMOSAXAttributes &	attrs
	)

inherited

Parses its values and builds an overhead wire section.

Parameters

[in]	net	The network the overhead wire segment belongs to
[in]	attrs	SAXattributes which define the trigger

Exceptions

InvalidArgument If a substationId is not known, a segment is not known or is assigned to another overheadWireSection

Todo:: for cycle abbreviation?

Definition at line 229 of file NLTriggerBuilder.cpp.

Referenced by NLHandler::myStartElement().

Here is the caller graph for this function:

◆ parseAndBuildOverheadWireSegment()

void NLTriggerBuilder::parseAndBuildOverheadWireSegment	(	MSNet &	net,
		const SUMOSAXAttributes &	attrs
	)

inherited

Parses its values and builds an overhead wire segment.

Parameters

[in]	net	The network the overhead wire segment belongs to
[in]	attrs	SAXattributes which define the trigger

Exceptions

InvalidArgument If a parameter (lane/position) is not valid

Definition at line 183 of file NLTriggerBuilder.cpp.

References NLTriggerBuilder::buildOverheadWireSegment(), SUMORouteHandler::checkStopPos(), SUMOSAXAttributes::get(), NLTriggerBuilder::getLane(), MSLane::getLength(), SUMOSAXAttributes::getOpt(), MSGlobals::gOverheadWireSolver, MSLane::isInternal(), NLTriggerBuilder::myHandler, NLTriggerBuilder::myHaveWarnedAboutEigen, SUMO_ATTR_ENDPOS, SUMO_ATTR_FRIENDLY_POS, SUMO_ATTR_ID, SUMO_ATTR_STARTPOS, SUMO_ATTR_VOLTAGESOURCE, TL, WRITE_MESSAGEF, and WRITE_WARNING.

Referenced by NLHandler::myStartElement().

Here is the caller graph for this function:

◆ parseAndBuildRerouter()

void NLTriggerBuilder::parseAndBuildRerouter	(	MSNet &	net,
		const SUMOSAXAttributes &	attrs
	)

inherited

Parses his values and builds a rerouter.

Parameters

[in]	net	The network the rerouter belongs to
[in]	attrs	SAX-attributes which define the trigger

Exceptions

InvalidArgument If a parameter (edge) is not valid

Definition at line 697 of file NLTriggerBuilder.cpp.

References NLTriggerBuilder::buildRerouter(), MSEdge::dictionary(), SUMOSAXAttributes::get(), MSTriggeredRerouter::getInstances(), SUMOSAXAttributes::getOpt(), StringTokenizer::getVector(), Position::INVALID, NLTriggerBuilder::myHandler, GenericSAXHandler::registerParent(), SUMO_ATTR_EDGES, SUMO_ATTR_HALTING_TIME_THRESHOLD, SUMO_ATTR_ID, SUMO_ATTR_OFF, SUMO_ATTR_OPTIONAL, SUMO_ATTR_POSITION, SUMO_ATTR_PROB, SUMO_ATTR_VTYPES, SUMO_TAG_REROUTER, TIME2STEPS, and StringUtils::toDouble().

Referenced by NLHandler::myStartElement().

Here is the caller graph for this function:

◆ parseAndBuildStoppingPlace()

void NLTriggerBuilder::parseAndBuildStoppingPlace	(	MSNet &	net,
		const SUMOSAXAttributes &	attrs,
		const SumoXMLTag	element
	)

inherited

Parses the values and builds a stopping places for busses, trains or container vehicles.

Parameters

[in]	net	The network the stop belongs to
[in]	attrs	SAX-attributes which define the stop
[in]	element	which kind of stop is to be built

Exceptions

InvalidArgument If a parameter (lane/position) is not valid

Definition at line 485 of file NLTriggerBuilder.cpp.

References NLTriggerBuilder::buildStoppingPlace(), SUMORouteHandler::checkStopPos(), SUMOSAXAttributes::get(), NLTriggerBuilder::getLane(), SUMOSAXAttributes::getOpt(), MSStoppingPlace::getTransportablesAbreast(), RGBColor::INVISIBLE, MAX2(), NLTriggerBuilder::myHandler, SUMO_ATTR_COLOR, SUMO_ATTR_CONTAINER_CAPACITY, SUMO_ATTR_ENDPOS, SUMO_ATTR_FRIENDLY_POS, SUMO_ATTR_ID, SUMO_ATTR_LINES, SUMO_ATTR_NAME, SUMO_ATTR_PARKING_LENGTH, SUMO_ATTR_PERSON_CAPACITY, SUMO_ATTR_STARTPOS, SUMO_TAG_CONTAINER_STOP, and toString().

Referenced by NLHandler::myStartElement().

Here is the caller graph for this function:

◆ parseAndBuildTractionSubstation()

void NLTriggerBuilder::parseAndBuildTractionSubstation	(	MSNet &	net,
		const SUMOSAXAttributes &	attrs
	)

inherited

Parses its values and builds a traction substation.

Parameters

[in]	net	The network the overhead wire segment belongs to
[in]	attrs	SAXattributes which define the trigger

Exceptions

InvalidArgument If the id is not given or is empty...

Definition at line 410 of file NLTriggerBuilder.cpp.

References NLTriggerBuilder::buildTractionSubstation(), SUMOSAXAttributes::get(), SUMOSAXAttributes::getOpt(), SUMO_ATTR_CURRENTLIMIT, SUMO_ATTR_ID, and SUMO_ATTR_VOLTAGE.

Referenced by NLHandler::myStartElement().

Here is the caller graph for this function:

◆ setHandler()

void NLTriggerBuilder::setHandler ( NLHandler * handler )

inherited

Sets the parent handler to use for nested parsing.

Parameters

[in] handler The netload handler to set

Definition at line 67 of file NLTriggerBuilder.cpp.

References NLTriggerBuilder::myHandler.

Referenced by NLBuilder::init(), and GUILoadThread::run().

Here is the caller graph for this function:

◆ updateParkingAreaDefaultCapacity()

void NLTriggerBuilder::updateParkingAreaDefaultCapacity ( )

inherited

updates the parkingArea default capacity

Definition at line 1021 of file NLTriggerBuilder.cpp.

References NLTriggerBuilder::myParkingArea, NLTriggerBuilder::myParkingAreaCapacitySet, and MSParkingArea::setRoadsideCapacity().

Referenced by NLHandler::myEndElement().

Here is the caller graph for this function:

Field Documentation

◆ myCurrentStop

MSStoppingPlace* NLTriggerBuilder::myCurrentStop

protectedinherited

The currently parsed stop to add access points to.

Definition at line 524 of file NLTriggerBuilder.h.

Referenced by NLTriggerBuilder::addAccess(), NLTriggerBuilder::buildChargingStation(), buildChargingStation(), NLTriggerBuilder::buildStoppingPlace(), buildStoppingPlace(), NLTriggerBuilder::endStoppingPlace(), endStoppingPlace(), and NLTriggerBuilder::getCurrentStop().

◆ myHandler

NLHandler* NLTriggerBuilder::myHandler

protectedinherited

The parent handler to set for subhandlers.

Definition at line 520 of file NLTriggerBuilder.h.

Referenced by NLTriggerBuilder::addAccess(), NLTriggerBuilder::parseAndBeginParkingArea(), NLTriggerBuilder::parseAndBuildCalibrator(), NLTriggerBuilder::parseAndBuildChargingStation(), NLTriggerBuilder::parseAndBuildLaneSpeedTrigger(), NLTriggerBuilder::parseAndBuildOverheadWireSegment(), NLTriggerBuilder::parseAndBuildRerouter(), NLTriggerBuilder::parseAndBuildStoppingPlace(), and NLTriggerBuilder::setHandler().

◆ myHaveWarnedAboutEigen

bool NLTriggerBuilder::myHaveWarnedAboutEigen = false

protectedinherited

Definition at line 526 of file NLTriggerBuilder.h.

Referenced by NLTriggerBuilder::parseAndBuildOverheadWireSegment().

◆ myParkingArea

MSParkingArea* NLTriggerBuilder::myParkingArea

protectedinherited

definition of the currently parsed parking area

Definition at line 522 of file NLTriggerBuilder.h.

Referenced by NLTriggerBuilder::addLotEntry(), NLTriggerBuilder::beginParkingArea(), beginParkingArea(), NLTriggerBuilder::endParkingArea(), endParkingArea(), NLTriggerBuilder::getCurrentStop(), NLTriggerBuilder::parseAndAddLotEntry(), and NLTriggerBuilder::updateParkingAreaDefaultCapacity().

◆ myParkingAreaCapacitySet

bool NLTriggerBuilder::myParkingAreaCapacitySet = false

protectedinherited

Definition at line 527 of file NLTriggerBuilder.h.

Referenced by NLTriggerBuilder::addLotEntry(), NLTriggerBuilder::endParkingArea(), NLTriggerBuilder::parseAndBeginParkingArea(), and NLTriggerBuilder::updateParkingAreaDefaultCapacity().

The documentation for this class was generated from the following files:

Public Member Functions

Protected Member Functions

Protected Attributes

Detailed Description

Constructor & Destructor Documentation

◆ GUITriggerBuilder()

◆ ~GUITriggerBuilder()

Member Function Documentation

◆ addAccess()

◆ addLotEntry()

◆ beginParkingArea()

◆ buildCalibrator()

◆ buildChargingStation()

◆ buildInnerOverheadWireSegments()

◆ buildLaneSpeedTrigger()

◆ buildMECalibrator()

◆ buildOverheadWireClamp()

◆ buildOverheadWireSegment()

◆ buildRerouter()

◆ buildStoppingPlace()

◆ buildTractionSubstation()

◆ buildVaporizer()

◆ endParkingArea()

◆ endStoppingPlace()

◆ getCurrentStop()

◆ getFileName()

◆ getLane()

◆ getParkingArea()

◆ getPosition()

◆ parseAndAddLotEntry()

◆ parseAndBeginParkingArea()

◆ parseAndBuildCalibrator()

◆ parseAndBuildChargingStation()

◆ parseAndBuildLaneSpeedTrigger()

◆ parseAndBuildOverheadWireClamp()

◆ parseAndBuildOverheadWireSection()

◆ parseAndBuildOverheadWireSegment()

◆ parseAndBuildRerouter()

◆ parseAndBuildStoppingPlace()

◆ parseAndBuildTractionSubstation()

◆ setHandler()

◆ updateParkingAreaDefaultCapacity()

Field Documentation

◆ myCurrentStop

◆ myHandler

◆ myHaveWarnedAboutEigen

◆ myParkingArea

◆ myParkingAreaCapacitySet